Related
hi everyone
ive just bought myself a XDAIIs pda, ive set up TOMTOM 3 sat nav and have bought a BT TomTom GPS receiver. sat navs working perfectly. but got one BIG problem, i cant find myself a decent car kit. ive tried the Arkon CM531, didnt like it-too many wires and very messy, got carkit with fixed charging through the cig-lighter- did not fit my phone as cradle was for XDAII.
Im really stuck so could anyone please help me. im looking for a car kit which will allow me to slide my xda2s in and out easily, hold it in place and also charge it at the same time whilst its in the cradle.
ANY SUGGESTIONS
Same here ! I could not find anything decent. Any suggestion welcome !
xda2s car cradle
did you find one ?
I GOT THE ANSWER
GOOD CAR CRADLE
TRY
WWW.ARKON.COM
CHEERS
VENKAT
Try www.brodit.com, they produce a few different versions ie. power, power/gps or passive. there not bad looking either!
How do you deal with the Arkon RF/speaker interference?
venkie9910,
sorry for repeting my question, but I did not go an aswer yet:
I read here that it was unacceptable...
http://forum.xda-developers.com/viewtopic.php?t=13654&start=0
how do you deal with it?
Thanks,
Chris
I got the brodit one from handnav with a pro-clip and it fits perfectly and looks good (once you've removed the tacky brodit sticker). Only problem is that the hard-wired version isn't available for the PDA2K yet and the cost! A bundle including the clip, holder and charger set me back £70, but you pay for what you get.
Hard wired one is now available with or without gps ps2 port, I have just ordered one with gps, cost £59.99 plus p+p, the pro clip for fitting to the dash cost £15.99. hopefully it will arrive next week
Hi all, I have this Bordit 849582 for sale: http://w3.easytrade.net/brodit_shop/product.dip?item=1225583&fid=1225727
Just buy yourself a Rikaline GPS mouse . Attach it in your car and slide your Qtek 2020 into the cradle and start navigating!
Interesting? Mail me or just reply!
I think people hurry into buying a bluetooth GPS which leaves them with only a hardwired option for in-car. (some exceptions with multiple bluetooth capability) I prefer the inverse combination. If you're using your nav software you need to see your phone so its going to be in a cradle anyway. If you just pop down the shops you can leave your phone in your pocket and your bluetooth carkit still works.
I'd go for a cradle with GPS built in, or a connector for extrnal GPS. Preferably powered (battery hungry these PDAs!) then BT carkit.
But be careful with carkit choice. Some have the awful echo problem. Can't add much more than that except that an M2000 and Nokia CK-7W is NOT a good combination :-(
There is a decent carkit coming that supports talk function and wired GPS. It is already available for the 2020 and its coming for the 9090. It`s based on a CMPC Carcomm cradle. If everything goes right it should be released next week. I will buy it definatly and will keep everybody posted.
TomTom Car Mount for XDA IIs / MDA III / SPV M-2000 etc tec
try this - can be hard wired or use ciggy lighter connection....
http://www.pdamods.com/proddetail.asp?prod=A11XDA2SMNT&cat=23
regards
Alan
Cheap and Effective Magnetic Mount
Hi,
how about trying a magnetic mount?
http://www.tangshop.com/magnetic-cell-phone-holder.html
Cheap, effective and neat (inconspicuous), but you have to stick the metallic mounting plate onto the back of your PDA (somewhere in the middle, preferably on the battery). Fortunately, the sticky pads are from 3M so they are strong and the residue can be removed with normal dabbing of scotch tape. The metal plate is thin so it does not affect the fitting to existing casings.
The part that sticks to the dash is using the same adhesive too.
I've tried this with a Bluetooth GPS and the XDA IIs on the dash, and the magnet is strong enough to hold the PDA in place even through fast corners and bumps ...
Cheers,
David
Another option is from this company:
http://www.thb.de
However I couldn't find a picture of the cradle.
I have however seen the cradle in the flesh and is it very very nice... even has DSP processing for the handsfree.
It is very pricey though.
Forgot to also add this link.... has a few pictures
http://www.ptp.net.au/s8_cradles_XDA_Imate.html
I do not know if they have one for the tom tom as I do not know what a tom tom is, but ProClipUSA.com has some great PDA holders for the iMate PDA 2K
Raptor
Newbie question maybe but did do some searches first and couldn't locate any info.
I have just bought XDA IIs and I'm looking for a car mount for it. There are plenty out there for the XDA II but not yet for the XDA IIs, is there any physical diffeence between the bottom of these units, i.e the connecting/charging port.
Ideally I want one that will also charge the PDA and a GPS unit when I eventually get one. I have seen a Carcomm holder/charger for the XDA II that looks good but unsure if it's suitable. (available from TotalPDA, their product ref 4738)
Effectively two questions here as I try to solve one problem, any advise appreciated.
Cheers :lol:
Similar BUT different
The position, general design and connector pinouts for the bottom port are identical from the first Wallaby to the new Blue Angel, BUT the physical connector on the Blue Angel (XDAIIs, MDAIII, SX66) has a slight alteration from the connector in previous generations. There is a small keying protrusion on one side of the Blue Angel accessory port. Several owners of Blue Angels have been forcing the older type connectors into the Blue Angel and while the pinouts and connectors themselves mate up, doing this places mechanical strain on the connector in the Blue Angel as it has a mating protrusion that normally would fit into the keyway on the plug, but now is mechanically forced outward. Over time, this has a strong potential for damaging the connector on the Blue Angel.
Check out this thread as it has pictures of what I am describing http://forum.xda-developers.com/viewtopic.php?t=12092
So, at this time, I have not found ANY Blue Angel specific accessories(ie designed to mate with the newer connector). In time these surely will appear. In the meantime, a little work with a Dremel tool can create the keyway in the plugs on older generation accessories and doing so will no harm those accessories but it WILL protect the connector in the Blue Angel.
BTW, I have both the first gen and the last gen, so I have accessories whose connector will have to be modified
david
I am still using a Clic on car kit I had for my Ipaq 5550, i purchased a new cable when I got the XDA2, and then used some black hard foam on the cradle, as the xda2 was a little thinner. Then when upgrading to the XDA2s, it used the same connection, and fit just as snug.
Seidio is supposed to be releasing a car kit for the PDA2K sometime this month. Check out http://www.seidioonline.com/
Rajesh
Car Mount
Brodit supply one - in the UK use handnav.co.uk :
http://www.handnav.co.uk/search_results.php?brand_only=true&st=Brodit
or on brodit :
http://w3.easytrade.net/brodit_shop/product.dip?item=1244372&fid=1244565
I use this and it works fine.
You need a car specific ProClip also from same website.
Car mount for XDA IIs
Hi, I have just purchased an Arkon car mount from ebay at £29.99 + £5 p&p. It has power and plugs for GPS I am using a Holux Bluetooth that I am powering from the auxillary power port on the unit, it has sockets for hard wire GPS receivers as well and a buit in amplified speaker. Go into ebay and key in XDA car mount. The same unit was £55 on Tottenham Court Road, I will say though that the power conector to the IIs was stiff so the previous guy saying about the difference is probably correct. Will get the Dremil out tonight.
Thanks for all the replies, I have now ordered an Arkon CM532 from E-bay and feel (fairly) confident of modifying the connecter to suit my XDA IIs as required.
Merry Xmas to you all.
How do you deal with the Arkon RF/speaker interference?
I read here that it was unacceptable...
http://forum.xda-developers.com/viewtopic.php?t=13654&start=0
how do you deal with it?
As it turns out I didn't order a mount as an e-bay company i had already approached came back saying they were hoping to release a specific mount for the XDAIIs around about now.
I've just e-mailed them to see if they've got them in yet.
Keep us updated!
Chris
Arkon CM531 works with o2 XDA IIs
Hi Guys, I've been using my Arkon CM531 (made for the o2 XDA II) fine with my new o2 XDA IIs. This is a relief as it means that I won't have to dish out more money! Whoo hoo!
I use a mag mount kit which is £8.99 at PDA Mods http://www.pdamods.com/proddetail.asp?prod=WSMMOUNT&cat=23
On the XDAII i put the small metel plate supplied under the back cover and that works perfectly. In the XDAIIs there is no battery cover so i have ordered a proprota alu-leather case http://www.proporta.com/F02/PPF02P05.php?t_id=978&t_mode=des
which has a magnetic mount built in. I have not received it yet.
I then use a Wired GPS that i brought from PDA Mods for the XDAII. This also powers the XDAII. This fits and works perfectly in the XDAIIs.
If you have both devices and look closely at the XDAII & XDAIIs sockets there is a slight difference on the XDAIIs. But this is backward compatable. IE you can use any connector desiged for the XDAII on the XDAIIs but you can not use a connector designed specifically for the XDAIIs in the XDAII.
Just take a look at your power dongle for the XDAIIs it WILL NOT fit your XDAII. Strangely though on the cradle they fitted a backward compatible connector and not a XDAIIs specific one. So you can plug your XDAII into the XDAIIs cradle.
I'm looking for a car-mount that will fit the Wizard.
I don't want a speaker or any connectors, just a mount, preferably with lots of foam so it doesn't squeek and rattle. I also don't want a 'window sucker' model.
I've googled it but can't find anything that says it will work with the Wizard.
Anyone seen/got one that will fit?
Me to.
I've been using Brodit mounts for the last couple of years but I keep swaping cars (between my own and a company one) recently.
This is the most promising one I've found so far.
http://www.arkon.com/pdamount.php
I like the look of this one because when I get a better case (flip type) there should be room to mount with it left in side.
Nice
Good range. Arkon only do a 'sucker' windshield mount for the jam/k-jam though.
Still looking.
Is there a UK site with them?
Any ideas when K-Jam accessories will appear? I want some screen protectors and don't like cutting bigger ones down to size.
Boxwave do some screen protectors and do ship to the UK.
http://www.boxwave.com/products/easyfinder/buy-best-i-mate-k-jam-accessories_734.htm
The Arkon kit CM910 has a vent, sticky Dash and suction cup mount included.
http://www.globalpositioningsystems.co.uk/arkon-universal-pda-mount-description.html
I think expansys do some Arkon Kit.
You might also want to look at
http://www.handnav.co.uk/product_details.php?id=126
http://www.globalpositioningsystems.co.uk/the-clip-company-vent-mount-description.html
Edit : I forgot to mention that Halfords do a expanding Phone Vent mount I think it's about £15.
Brodit is introducing a passive mount early this month (presumably 1st half).
Although I have not found any retailer selling it at the moment.
Cool I''ve been holding out for that one But I might get a cheap suction holder for the other cars I use.
I just bought a cheap HR Richter mini holder while I await a Brodit active holder.
Doesn't make sence for me to buy a passive holder now and an active holder in a while.
Brodit has released their mount for the wizard. I started a thread on HoFo
http://www.howardforums.com/showthread.php?t=764452
Brodit has released their mount for the wizard. I started a thread on HoFo
http://www.howardforums.com/showthread.php?t=764452
I'm using a plain old simple magnetic car holder from carphone warehouse which works just fine for me. £5 from carphonewarehouse - job done.
I'm using a plain old simple magnetic car holder from carphone warehouse which works just fine for me. £5 from carphonewarehouse - job done.
eayuwna said:
I'm looking for a car-mount that will fit the Wizard.
I don't want a speaker or any connectors, just a mount, preferably with lots of foam so it doesn't squeek and rattle. I also don't want a 'window sucker' model.
I've googled it but can't find anything that says it will work with the Wizard.
Anyone seen/got one that will fit?
Click to expand...
Click to collapse
Halfords has a universal holder for £14.99 that held my Vario very securely when I tried it in the shop and did not obscure the speakers or the USB port. It came with a window sucker and a sticky pad option. I'm not sure if there were clip or magnetic options as well.
Tesco have a universal holder for £4.97 that clips to the air vents. It was in a bubble pack and I could not tell whether it would open wide enough. But I don't suppose Tesco would object to a refund if it didn't, since there is no way to try before you buy.
Further to my post above I just bought a universal holder from a Vodafone shop for £5.00. It has air vent and sticky pad options and a slick/smooth adjustment operation - better than other units I tried for £10+. There is a gap at the bottom for headphones and USB charging if needed.
I don't like the idea of blowing hot air all over the back of the phone for hours in the middle of winter so I've plumped for the sticky option. I have yet to test it on the move with the Vario attached. I'll leave it overnight for the adhesive to stay stuck and then see how it goes.
ClearTouch Crystal, Qtek 9100 from Boxwave.
Any one who have tried that cleartouch crystal protection? Waitin for mine to arrive :/
q-biq said:
ClearTouch Crystal, Qtek 9100 from Boxwave.
Any one who have tried that cleartouch crystal protection? Waitin for mine to arrive :/
Click to expand...
Click to collapse
I've got one on my wizard and it looks great. I messed the first one up and i stuck the wrong side down on the screen and it gave an oil kind of effect on the screen, i'm sure the peel off sticker was on the wrong side, anyway i binned that and used one of the others i got and now it looks and fits great. had it on a few weeks now and its not scratched yet.
my last boxwave screen protector lasted over a year.
Hi all,
I have Brodit mounts available for the Mini (Wizard, Mini s) inc either a gooseneck mount or a brodit car specific pro clip.
Please feel free to visit www.dsldevelopments.co.uk for further details
Thanks, please PM me or email me if you have any questions or need any images,
Thanks
Dave
I've got this one and its fine!
http://cgi.ebay.co.uk/W-W-NEW-UNIVE...840540172QQcategoryZ10364QQrdZ1QQcmdZViewItem
Hi Stunno,
Am I corect with that one off ebay - the handfree and power socket are both obscurred by the base of the cradle?
Scott
This is the ONE! I jst got off the phone with www.proclipsusa.com, she is calling brodit to find out if it's in the shipment that's on it's way. I'll wait.
KJAM active mount
slewis1972 said:
Hi Stunno,
Am I corect with that one off ebay - the handfree and power socket are both obscurred by the base of the cradle?
Scott
Click to expand...
Click to collapse
No, the "base" only sticks out 3 or 4mm
Hi Guys,
Just to let you all know that Brodit have released the following TyTn Holders:
Passive Holders, both portrait 848690 and landscape 848691 (with keyboard exposed)
Active holders -Portrait 968690 & Landscape 968691 inc. cig lighter charger
Molex Active holders - portrait 971690 & Landscape 971691- using Molex hardwired open cables for fixed installations and powering GPS units with Molex adapter lead.
To view & buy etc, just type the code into the search box at:
www.dsldevelopments.com
Thanks all,
Bryson
Hi Guys,
Had a lot of questions regarding the Brodit holders for the network carrier variants of the HTC TyTn, and what the Brodit TyTn holders fit:
the range for the HTC TyTn fit the folowing devices:
HTC Hermes - SPV M3100, MDA Vario II, HTC TyTN, XDA Trion, Dopod 838 Pro, i-mate JASJAM and Dopod CHT 9000.
At present we only have the holders available by Brodit listed under the HTC TyTn name, but if yours is one of the above, then the TyTn holders on www.dsldevelopments.com should fit!
Hope that helps all,
Cheers,
How do you put the tytn in the horizontal holder? Does it just slide down? Do you have to connect the cable manually? Is it possible to hook up external speaker/mic with this holder or is it for charging only?
Tony K. said:
How do you put the tytn in the horizontal holder? Does it just slide down? Do you have to connect the cable manually? Is it possible to hook up external speaker/mic with this holder or is it for charging only?
Click to expand...
Click to collapse
Hi Tony K,
Yes you just slide it down into the holder. Yes you have to place the cable in manually for the Horizontal holders (codes ending in ***961) the Portrait versions slid in and dock onto the usb connector (codes ending ***960)
As with all USB devices from HTC it only charges, you need a bluetooth carkit like a parrot kit to get the full benefits of a phone kit in your car, ie additinal mic and audio out through your speakers,
Many Thanks
Bryson
I use the vertical brodit holder with plug for lighter connector. It works great and holds the Tytn securly in place.
i keep on getting dns error when im trying to view ur page. maybey work filter
For those who are looking for a car holder for their TP2 and can't find one yet, I have made a useful discovery.
The Brodit TyTNII Holder actually fits the TP2 better than my TyTNII ever did!
http://www.dsldevelopments.com/brodit/holder/HTC+TyTN II-Brodit-Holder.asp
I tried it last night and it slid into the fixing nice and easily.
The only issue I had was that I have an active holder, so the miniUSB connector wasn't lined up and so wouldn't charge the phone. I'm sure with some careful modification it wouldn't be too difficult to sort that out though!
I'm now in two minds as to whether I even bother getting a proper TP2 kit when it's out!
dazultra2000 said:
For those who are looking for a car holder for their TP2 and can't find one yet, I have made a useful discovery.
The Brodit TyTNII Holder actually fits the TP2 better than my TyTNII ever did!
http://www.dsldevelopments.com/brodit/holder/HTC+TyTN II-Brodit-Holder.asp
I tried it last night and it slid into the fixing nice and easily.
The only issue I had was that I have an active holder, so the miniUSB connector wasn't lined up and so wouldn't charge the phone. I'm sure with some careful modification it wouldn't be too difficult to sort that out though!
I'm now in two minds as to whether I even bother getting a proper TP2 kit when it's out!
Click to expand...
Click to collapse
just a quick question. Ive never owned one of these fo rhte car. How does it attach to your car? Adhesive? Screws?
mallman said:
just a quick question. Ive never owned one of these fo rhte car. How does it attach to your car? Adhesive? Screws?
Click to expand...
Click to collapse
Depends, you can just screw it into your car, but I use the Brodit Proclip which is different for every car. Mine hooks around the side of the radio and into another groove and is very solid, then the holders screw into the proclip.
Proclips are probably the best way forward, no holes in your car
I have a dashmount kit from www.dashmount.co.uk as the proclip from brodit doesn't seem to fit my car correctly.
dazultra2000 said:
For those who are looking for a car holder for their TP2 and can't find one yet, I have made a useful discovery.
The Brodit TyTNII Holder actually fits the TP2 better than my TyTNII ever did!
http://www.dsldevelopments.com/brodit/holder/HTC+TyTN II-Brodit-Holder.asp
I tried it last night and it slid into the fixing nice and easily.
The only issue I had was that I have an active holder, so the miniUSB connector wasn't lined up and so wouldn't charge the phone. I'm sure with some careful modification it wouldn't be too difficult to sort that out though!
I'm now in two minds as to whether I even bother getting a proper TP2 kit when it's out!
Click to expand...
Click to collapse
I have the passive brodit holder for the TYTN II, but TP2 doesn't fit without scrating it.
seems to fit in my origional htc trinity carrier perfectly, only problem is i cant charge it lol so ill have to get a new one eventually
thank you for the tip!!
I have a Brodit Active holder for my old P3600 (Trinity) and it fits real nice...
After some modifications (I cut off the USB part, and super glued it back on at the correct place to fit my TP2) I now have a Brodit Active holder that I can use again!
No scratches what so ever!!
(saves me about €50 )
^Good Tips...Brodit has always been my favorate car holder for all my devices!
do you know when the TP2 model will be released?
thanks
asked brodit and they say later next week...
Brodit holders now available. Just got to wait for them to filter to your resellers now.
Active: http://www.brodit.com/productinformation.jsp?anr=512021&sortiment=null
Passive: http://www.brodit.com/productinformation.jsp?anr=511021&sortiment=null
As I have already said, looks more or less identical to the Kaiser mount with a central support.
A word of warning to people buying, I had 2 active Brodit mounts that killed 2 different Kaisers because the charger unit was dodgy.
In the end I got another replacement from Brodit but I was too cautious of them by then, so I hacked an official HTC car charger into it.
I am personally gonna get the passive holder and use my HTC charger as I'm not going to take the risk again.
The htc supplied trinity/m700 one fits a dream but needs the bottom cutting out a little as the plug socket is in a different location. Damn good sturdy mount as well.
not sure I'll be getting any until it is confirmed that the pins are aligned and the phone does charge when using GPS.
I had issues with the Brodit one for the Kaiser and when it never worked they blamed HTC
Just ordered my passive with tilt swivel now!
Hope it arrives soon!!
Deiota said:
Just ordered my passive with tilt swivel now!
Hope it arrives soon!!...
Click to expand...
Click to collapse
Where did you end up ordering from, all I can find are 'pre order' listings ?
Thanks
Messa
elab said:
Where did you end up ordering from, all I can find are 'pre order' listings ?
Thanks
Messa
Click to expand...
Click to collapse
DSL Developments have 6 passive mounts in stock according to the website.
Gordon
GordonTGopher said:
DSL Developments have 6 passive mounts in stock according to the website.
Gordon
Click to expand...
Click to collapse
Hi, yes I saw those I am leaning more towards the active one though.
Thanks anyway.
Messa
I ordered a passive mount this morning and a new proclip to see if they ship the right one this time!
I'd try and heed my advice about the active mounts. At least wait until some other poor guinea pig has tried one!
I asked HTC This:
Is there an option for the HTC Touch Pro2 with the HTC 3-in-1 connector bundle?
Or is this compatible:
Set A
- 513021 Active Holder, Tilt Swivel
- 945011 Adapter Cable
Set B
- 512021 Active Holder, Tilt Swivel
- 945011 Adapter Cable
In terms of connecting my HTC touch Pro2 to a charging unit (built in the car) and also using the AUX out of the device via the mini-USB.
I want to know if the 3-in-1 cable/connector is able to be “plugged” in into 513021 of 512021
They answered me this:
It will also come a 3-in-1 holder for this device. The item no will be:
519021 short cable
520021 long cable
I hope those will be ready within 2-3 weeks.
One thing that you need to keep in mind with the 3-in-1 cables in that if you plug it in, the external speaker gets disabled. therefore if you're planning on using the mount for satnav, you'll need to hook it up to an aux-in on your car speakers in order to get any sound!