how can I flash only my radio stack? mine is 1.06. I want to upgrade it to 1.14. I already have the nbf file from iMate 1.72.162.
Thx alot.
Hi All,
please help me. I yesterday have only MDA1 and for flashing need to files RUU and RSU. And now i have (tomorow) new MDA2 and search new best FW for it. I hve only RUU172126WWE_imate.exe and no radio. Is need radio too? Or is all in one file (RUU172126WWE_imate.exe )? Where i can downaload new fw and radio? And best aplication for it. Meny fnx for reply and help.
arrgh...
in the exe everything is included... rom, ext-rom and radio...
Have fun
meny fnx. and is posible kitchen rom for new MDA2 or only for MDA1? Is posible, where? And Best of img for MDA is? And Where can I download?
Sorry for my very bad english.
There is no kitchen for XDA II ... you can modify the ext-rom as you need.
there are many posts here... but none answers the question of the topicstarter?
I have the same question. Is it possible to update only the radio stack and leave the rom and extended rom alone?
And if it is possible, will the update work without a cold reset?
thanks for your answers
calvin
radio stack only
yes you can upgrade the radio stack only. open the ROM upgrade with the radio stack you eant by unzipping it NOT running it. after unzipped, delete both the other nbf diles and leave only the radio stack nbf file in the directory. run himalaya upgrade from that directory. the first upgrade screen will tell you the radio version being replaced and not indicate any upgrade for the other two..
i have done this successfullly by leaving 1.72 alone and switching between 1.10, 1.12 and 1.14 radio stacks. a cold reboot is required, but a sprite backup of the 1.72 system with a 1.10 radio stack worked fine after restore to the 1.72 system with the 1.14 radio.
hope this helps.
steve
hey... anyone know where I may be able to get an imate 1.60 ROM from? Especially some of the older radio rom's... having no end of problems with 1.72/1.14..
@watchdogsdg
thanks for your helpful reply, I will try to update my radio stack.
And please give me instalation instrukcion for good fleash all and modify my rom. I can put to rom ICQ, NetFront, TotalComander, JpegView, MP3, Divx, ... And please give mi link for download all whot i need. And meny soft and games and Czech leng for XDA2. Meny meny fnx.
Sorry form my junior question.
the laterest trad. Chinese ROM is 1.66.06
I am using it now ~
cool!
simplified chinese rom
Hi, there:
I'm a newbie from china mainland, and I'm using a dopod696 which I think is an oemed xda II. the rom information about it like this:
ROM: 1.66.07CHS
ROM date: 02/23/04
Radio: 1.15.00
Protocol: 1337.25
ExtRom: 1.66.225
and its Pocket PC version is 4.20.0(build 13252)
I have these questions: is it running wm2k3 or wm2k3se and how can I tell? is there any newer CHS rom available?(dopod's technical support is very poor.) can I use XDATools to backup its rom? and who actually built these roms? Microsoft or the device manufacturer?
Thanks for your help.
Hi, Zhoudan.
AFAIK.
You have a newest XDAII (Chinese version isn.t ??) with OS Windows Mobile 2003 Service Pack 1.
WM2003SE is Pocket PC version 4.21.
ROM built by Device Manufacturer (Vendor like O2, I-Mate, Qtekk or T-Mobile), sorry i do not know you vendor (Dopod ???), may be they are sub vendor from O2.
Microsoft is support OS only.
Thank's
ajong [/quote]
Thanks a lot ajong,
I noticed some people here are talking about rom version 1.72 which seems to be wm2003se, is there a simplified chinese version available?
zhoudan said:
Thanks a lot ajong,
I noticed some people here are talking about rom version 1.72 which seems to be wm2003se, is there a simplified chinese version available?
Click to expand...
Click to collapse
That's wrong. Until now there is no WM2003 SE available for the XDA II.....
HTH
Stefan
Rom 1.72
WM2003SE is not come out yet, wait untill the end of the year !!.
update to 1.72 rom, you will get WM2003sp2 with benefit increase battery lifetime, bluetooth customization, .....
afaik, not chinese version in 1.72 rom.
i heard O2 will make 1.72 rom which WM2003SE included, but i am not sure :?: :?:
sawed said:
the laterest trad. Chinese ROM is 1.66.06
I am using it now ~
Click to expand...
Click to collapse
I really need this. Could you capture it out and upload for our downloading? Thanks.
Re: 1.66 CHT ROM
Sawed, please share with us la
negatong:
I have got the CHT ROM 1.66 but in SD Image,
in reply I need you to convert to nbf files. Can u
do that
Cheers
AL
alexlay said:
negatong:
I have got the CHT ROM 1.66 but in SD Image,
in reply I need you to convert to nbf files. Can u
do that
Cheers
AL
Click to expand...
Click to collapse
Alex,
Use the attached tool 'ntrw.exe' to extract the ROM image in SD card:
1. Insert the SD card containing the ROM into a card reader
2. If the card reader drive is 'X:\' under your Windows, then run:
ntrw.exe read xda2_166_cht_image.nb1 x:
(where the 'xda2_166_cht_image.nb1' will be filename of the captured ROM, it can be whatever you like)
Then, you can find an extracted ROM file under the working directory.
I have PM you with my email address. Could you please send me the ROM file, please? Or, you might upload it to ftp.xda-developers.com and inform me.
Thanks a lot!
sorry...I already upgraded to se..& didn't backup the old rom
negatong said:
alexlay said:
negatong:
I have got the CHT ROM 1.66 but in SD Image,
in reply I need you to convert to nbf files. Can u
do that
Cheers
AL
Click to expand...
Click to collapse
Alex,
Use the attached tool 'ntrw.exe' to extract the ROM image in SD card:
1. Insert the SD card containing the ROM into a card reader
2. If the card reader drive is 'X:\' under your Windows, then run:
ntrw.exe read xda2_166_cht_image.nb1 x:
(where the 'xda2_166_cht_image.nb1' will be filename of the captured ROM, it can be whatever you like)
Then, you can find an extracted ROM file under the working directory.
I have PM you with my email address. Could you please send me the ROM file, please? Or, you might upload it to ftp.xda-developers.com and inform me.
Thanks a lot!
Click to expand...
Click to collapse
Hi.
I have uploaded into Uploads/CHT166, please help convert to
nbf files.
Cheers
Alex
Alex,
Thanks for your uploaded files VERY MUCH! I have upgraded my XDA II to 1.66 CHT successfully!
The zip file you uploaded is actually the ROM file (I used Hex Editor to open it). You can just rename it to any new name with extension 'nbf'. Then, you can flash it to any XDA II device. (Actually you can directly use that to flash)
For how to flash a XDA II, please refer to:
http://www.wda.com.cn/viewthread.php?tid=108440&extra=page=1&filter=digest
Once again, thank you very much!!
Tong
negatong said:
Alex,
Thanks for your uploaded files VERY MUCH! I have upgraded my XDA II to 1.66 CHT successfully!
The zip file you uploaded is actually the ROM file (I used Hex Editor to open it). You can just rename it to any new name with extension 'nbf'. Then, you can flash it to any XDA II device. (Actually you can directly use that to flash)
For how to flash a XDA II, please refer to:
http://www.wda.com.cn/viewthread.php?tid=108440&extra=page=1&filter=digest
Once again, thank you very much!!
Tong
Click to expand...
Click to collapse
Tong,
I understood, I just need to rename the CEROM to extension with nbf is that right. So what about ExtenRom. It is in zip format. How do I handle?
Cheers
AL
PS: I have tried your link but failure to register. Please advice
You can register the website as free, then you can see those upgrade steps. Actually, flashing with Ext ROM is much easier, and is also included in the thread.
Hope that may help.
i have been download the cht 1.66, can somebody tell me the simple way to flash it, i have already downgrade from 2.06www to 1.52cht, many thx!!
negatong said:
You can register the website as free, then you can see those upgrade steps. Actually, flashing with Ext ROM is much easier, and is also included in the thread.
Hope that may help.
Click to expand...
Click to collapse
Tong,
Please teach me how to flash Radio Rom separately, I know you are the expert on XDA. Have you try out the WM2003SE if so can you solve the problem on widcom issue with handsfree profit. Please teach me la.
Alex
Alex,
Can you view the thread I provided as above? At there, you can know all about how to upgrade ROM, flahs Ext ROM and Raio ROM.
I don't konw what is the widcom problem you encounter.
By the way, I am not 'expert' and just know a little. Thank you.
Tong
negatong said:
Alex,
Can you view the thread I provided as above? At there, you can know all about how to upgrade ROM, flahs Ext ROM and Raio ROM.
I don't konw what is the widcom problem you encounter.
By the way, I am not 'expert' and just know a little. Thank you.
Tong
Click to expand...
Click to collapse
Tong,
Help, I have follow the step from the article your mention to flash the ROM but each time I got the error of :
Section = 1
Not allow
update!....
Please help. BTW can you flash you CHT1.66 into a 128 or 256 SD Card so that I don't need to the CEROM file again.
Please help.
AL
I just uploaded Extended Rom files to FTP.
Also rar archive attached to this msg.
How did you unlock the extended rom. Could you please post the tool that you used to gain access.
Thank you,
Mike
I have been decrypted ms_.nbf and extrracted these files.
what is thwe password to decrypt ms_.nbf for XDA IIi ?
It's really amazing that you found it.
Thank a lot
The O2UK_connectionsettings cab is in config.txt but the cab is missing. Is this intentional?
Surprise !!!
Caller_ID_Alpine_Generic_WWE_RC16.CAB = Caller_ID_Magician_Generic_WWE_RC13.CAB at ExtROM Qtek 1.05.116.
(Caller_ID Ver. 1.20 build 18567)
also
SmartDialling ver. 1.0 build 18076
PhonePad ver. 1.0 build 18567
------
Encryption method is changed.... there is no password.
I can only decrypt these files.... i can not encrypt them back.
many thanks
many thanks ... genious
thanks a lot really nice one specially:
SmartDialling ver. 1.0 build 18076
PhonePad ver. 1.0 build 18567
dont use the patch.cab file it is specifically meant for XDA IIi else you will have to hard reset your device.
tupisdin said:
I just uploaded Extended Rom files to FTP.
Also rar archive attached to this msg.
Click to expand...
Click to collapse
Can we install these extend rom, particularly the bt3900 to xdaII.
I am using xdaII, rom version 1.66.00 WWE
Man this Network lock sucks
Hi there all. I just got an XDAIIi from my sis in the UK. How ever after hours and hours of going through the forum I realised that the only way to unlock my PDA is through imei check. I hope that there is a program on the way to unlock them same as the XDA 2. Cheers
hi
can anyone tell me from where can i find Radio Rom v1.41.00.10. i need it urgently.
ftp site of xda developer is not working at my computer.
please tell me any rapidshare or other location address
thanks
No problem. Here.
thanks
thanks man
you are great
can u send me a link for other earlier versions til 1.47
please
1.43.00.00
All radio versions between 1.07.03.10 and 1.54.30.10
http://xda.not2advanced.com/pandora/index.php?path=Radio_Roms/
http://www.crc.id.au/files/xda/index.php?path=Radio_Roms/
Thanks for all these, I want to put them on the wiki and get it updated again after they get the FTP server fixed.
please tell me how can i change these .nb file to .nbh files
you can use dutty's good nbh tool
but then.....why do you need to convert nb to nbh if you're just upgrading a radio.....or are you doing more than just upgrading the radio
XtreMe_G said:
you can use dutty's good nbh tool
but then.....why do you need to convert nb to nbh if you're just upgrading a radio.....or are you doing more than just upgrading the radio
Click to expand...
Click to collapse
actually i m using 1.35.00.11 radio rom. but i m getting some issues on it so i need to downgrade my rom to 1.07.03.10.
thats why i m asking. and the available file is .nb so i hav to convert it to .nbh
Can someone please provide me with a link to this file please. I've travelled all over the forum looking for it but can only find reference to it and not the actual file.
Also this file please HimaGetDeviceData.exe.
Im looking to upgrade my radio to 1.17 and as far as im aware this is what i need.
Thanks in advance.
Please link to aplication ->HimaUpgradeUt
hay you can find it in every ROM which provided in WM6 mobile development threads.
just copy HimaUpgradeUt.exe
Hello friends now you don't 've need to find this HimaUpgradeUt.exe this is upgrade utility by which you can upgrade your lovable hima devices...
all rights reserved to their respected owners.
I attached here .exe for you so don't postpone your upgrade plan cheers.
ooops there is password for this zip archive so don't be aware of it.......
password : KRUSHNA
http://forum.xda-developers.com/showthread.php?t=697833
use my upgrade tool!