Related
how can I flash only my radio stack? mine is 1.06. I want to upgrade it to 1.14. I already have the nbf file from iMate 1.72.162.
Thx alot.
Hi All,
please help me. I yesterday have only MDA1 and for flashing need to files RUU and RSU. And now i have (tomorow) new MDA2 and search new best FW for it. I hve only RUU172126WWE_imate.exe and no radio. Is need radio too? Or is all in one file (RUU172126WWE_imate.exe )? Where i can downaload new fw and radio? And best aplication for it. Meny fnx for reply and help.
arrgh...
in the exe everything is included... rom, ext-rom and radio...
Have fun
meny fnx. and is posible kitchen rom for new MDA2 or only for MDA1? Is posible, where? And Best of img for MDA is? And Where can I download?
Sorry for my very bad english.
There is no kitchen for XDA II ... you can modify the ext-rom as you need.
there are many posts here... but none answers the question of the topicstarter?
I have the same question. Is it possible to update only the radio stack and leave the rom and extended rom alone?
And if it is possible, will the update work without a cold reset?
thanks for your answers
calvin
radio stack only
yes you can upgrade the radio stack only. open the ROM upgrade with the radio stack you eant by unzipping it NOT running it. after unzipped, delete both the other nbf diles and leave only the radio stack nbf file in the directory. run himalaya upgrade from that directory. the first upgrade screen will tell you the radio version being replaced and not indicate any upgrade for the other two..
i have done this successfullly by leaving 1.72 alone and switching between 1.10, 1.12 and 1.14 radio stacks. a cold reboot is required, but a sprite backup of the 1.72 system with a 1.10 radio stack worked fine after restore to the 1.72 system with the 1.14 radio.
hope this helps.
steve
hey... anyone know where I may be able to get an imate 1.60 ROM from? Especially some of the older radio rom's... having no end of problems with 1.72/1.14..
@watchdogsdg
thanks for your helpful reply, I will try to update my radio stack.
And please give me instalation instrukcion for good fleash all and modify my rom. I can put to rom ICQ, NetFront, TotalComander, JpegView, MP3, Divx, ... And please give mi link for download all whot i need. And meny soft and games and Czech leng for XDA2. Meny meny fnx.
Sorry form my junior question.
the laterest trad. Chinese ROM is 1.66.06
I am using it now ~
cool!
simplified chinese rom
Hi, there:
I'm a newbie from china mainland, and I'm using a dopod696 which I think is an oemed xda II. the rom information about it like this:
ROM: 1.66.07CHS
ROM date: 02/23/04
Radio: 1.15.00
Protocol: 1337.25
ExtRom: 1.66.225
and its Pocket PC version is 4.20.0(build 13252)
I have these questions: is it running wm2k3 or wm2k3se and how can I tell? is there any newer CHS rom available?(dopod's technical support is very poor.) can I use XDATools to backup its rom? and who actually built these roms? Microsoft or the device manufacturer?
Thanks for your help.
Hi, Zhoudan.
AFAIK.
You have a newest XDAII (Chinese version isn.t ??) with OS Windows Mobile 2003 Service Pack 1.
WM2003SE is Pocket PC version 4.21.
ROM built by Device Manufacturer (Vendor like O2, I-Mate, Qtekk or T-Mobile), sorry i do not know you vendor (Dopod ???), may be they are sub vendor from O2.
Microsoft is support OS only.
Thank's
ajong [/quote]
Thanks a lot ajong,
I noticed some people here are talking about rom version 1.72 which seems to be wm2003se, is there a simplified chinese version available?
zhoudan said:
Thanks a lot ajong,
I noticed some people here are talking about rom version 1.72 which seems to be wm2003se, is there a simplified chinese version available?
Click to expand...
Click to collapse
That's wrong. Until now there is no WM2003 SE available for the XDA II.....
HTH
Stefan
Rom 1.72
WM2003SE is not come out yet, wait untill the end of the year !!.
update to 1.72 rom, you will get WM2003sp2 with benefit increase battery lifetime, bluetooth customization, .....
afaik, not chinese version in 1.72 rom.
i heard O2 will make 1.72 rom which WM2003SE included, but i am not sure :?: :?:
sawed said:
the laterest trad. Chinese ROM is 1.66.06
I am using it now ~
Click to expand...
Click to collapse
I really need this. Could you capture it out and upload for our downloading? Thanks.
Re: 1.66 CHT ROM
Sawed, please share with us la
negatong:
I have got the CHT ROM 1.66 but in SD Image,
in reply I need you to convert to nbf files. Can u
do that
Cheers
AL
alexlay said:
negatong:
I have got the CHT ROM 1.66 but in SD Image,
in reply I need you to convert to nbf files. Can u
do that
Cheers
AL
Click to expand...
Click to collapse
Alex,
Use the attached tool 'ntrw.exe' to extract the ROM image in SD card:
1. Insert the SD card containing the ROM into a card reader
2. If the card reader drive is 'X:\' under your Windows, then run:
ntrw.exe read xda2_166_cht_image.nb1 x:
(where the 'xda2_166_cht_image.nb1' will be filename of the captured ROM, it can be whatever you like)
Then, you can find an extracted ROM file under the working directory.
I have PM you with my email address. Could you please send me the ROM file, please? Or, you might upload it to ftp.xda-developers.com and inform me.
Thanks a lot!
sorry...I already upgraded to se..& didn't backup the old rom
negatong said:
alexlay said:
negatong:
I have got the CHT ROM 1.66 but in SD Image,
in reply I need you to convert to nbf files. Can u
do that
Cheers
AL
Click to expand...
Click to collapse
Alex,
Use the attached tool 'ntrw.exe' to extract the ROM image in SD card:
1. Insert the SD card containing the ROM into a card reader
2. If the card reader drive is 'X:\' under your Windows, then run:
ntrw.exe read xda2_166_cht_image.nb1 x:
(where the 'xda2_166_cht_image.nb1' will be filename of the captured ROM, it can be whatever you like)
Then, you can find an extracted ROM file under the working directory.
I have PM you with my email address. Could you please send me the ROM file, please? Or, you might upload it to ftp.xda-developers.com and inform me.
Thanks a lot!
Click to expand...
Click to collapse
Hi.
I have uploaded into Uploads/CHT166, please help convert to
nbf files.
Cheers
Alex
Alex,
Thanks for your uploaded files VERY MUCH! I have upgraded my XDA II to 1.66 CHT successfully!
The zip file you uploaded is actually the ROM file (I used Hex Editor to open it). You can just rename it to any new name with extension 'nbf'. Then, you can flash it to any XDA II device. (Actually you can directly use that to flash)
For how to flash a XDA II, please refer to:
http://www.wda.com.cn/viewthread.php?tid=108440&extra=page=1&filter=digest
Once again, thank you very much!!
Tong
negatong said:
Alex,
Thanks for your uploaded files VERY MUCH! I have upgraded my XDA II to 1.66 CHT successfully!
The zip file you uploaded is actually the ROM file (I used Hex Editor to open it). You can just rename it to any new name with extension 'nbf'. Then, you can flash it to any XDA II device. (Actually you can directly use that to flash)
For how to flash a XDA II, please refer to:
http://www.wda.com.cn/viewthread.php?tid=108440&extra=page=1&filter=digest
Once again, thank you very much!!
Tong
Click to expand...
Click to collapse
Tong,
I understood, I just need to rename the CEROM to extension with nbf is that right. So what about ExtenRom. It is in zip format. How do I handle?
Cheers
AL
PS: I have tried your link but failure to register. Please advice
You can register the website as free, then you can see those upgrade steps. Actually, flashing with Ext ROM is much easier, and is also included in the thread.
Hope that may help.
i have been download the cht 1.66, can somebody tell me the simple way to flash it, i have already downgrade from 2.06www to 1.52cht, many thx!!
negatong said:
You can register the website as free, then you can see those upgrade steps. Actually, flashing with Ext ROM is much easier, and is also included in the thread.
Hope that may help.
Click to expand...
Click to collapse
Tong,
Please teach me how to flash Radio Rom separately, I know you are the expert on XDA. Have you try out the WM2003SE if so can you solve the problem on widcom issue with handsfree profit. Please teach me la.
Alex
Alex,
Can you view the thread I provided as above? At there, you can know all about how to upgrade ROM, flahs Ext ROM and Raio ROM.
I don't konw what is the widcom problem you encounter.
By the way, I am not 'expert' and just know a little. Thank you.
Tong
negatong said:
Alex,
Can you view the thread I provided as above? At there, you can know all about how to upgrade ROM, flahs Ext ROM and Raio ROM.
I don't konw what is the widcom problem you encounter.
By the way, I am not 'expert' and just know a little. Thank you.
Tong
Click to expand...
Click to collapse
Tong,
Help, I have follow the step from the article your mention to flash the ROM but each time I got the error of :
Section = 1
Not allow
update!....
Please help. BTW can you flash you CHT1.66 into a 128 or 256 SD Card so that I don't need to the CEROM file again.
Please help.
AL
someone repost the radio stack for qtek 2020 please or email it to me at [email protected]. Sorry but i can't seem to get even logged in after Thanksgiving here in the US after the server was hacked. Thank you in advance definetly.
radio 1.17
http://forum.xda-developers.com/viewtopic.php?t=11844
link works but no link in other forum or am I missing something??
Hello
:arrow: Everything is working fine . But what do I have to do after downloading the file "Radio ROM 117". Step by step please ... Somehow I cannot open the file on my iMate Pocket PC . I did it many times on XDA first . But now I need a help .
I extract the radio rom zip file and extract the compressed rom that you last upgraded with and replace the radio_.nbf file with the new 1.17 and then reinstall the rom upgrade, just make sure you back up first.
Thanks
Thanks . I already did it .
I was wondering if anyone could extract the new radio version 1.07.03.10 from the imate rom and post it as an upgrade?
Thanks!
-mix
mixmaven said:
I was wondering if anyone could extract the new radio version 1.07.03.10 from the imate rom and post it as an upgrade?
Thanks!
-mix
Click to expand...
Click to collapse
It is possible to extract it (see the wiki on NBH files), but we cannot sign it and we don't have the proper private key from HTC... which they will not give to anybody.
When you try to flash it the bootloader says "Check cert error!", so no radio-upgrade only possible yet
ahhh, makes sense. thanks pof. I am having trouble deciding if I want to wipe my 1.18 tytn by upgrading to the imate rom or wait since hopefully an HTC load is just around the corner....
have a great weekend.
-mix
thanks to Asukal now it is possible to make a radio-only upgrade on your hermes, see details here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Thanks pof!
-mix
ok, Mousey here on the forums had dumped the Orange UK ROM from his Hermes; he then used buildimgfs to create a proper imgfs image; after this, we then wrote this imgfs to the AKU3.3 ROM (using it as a shell essentially) and the result was a successful flash and his PDA was running Orange UK OS ROM, so it would seem that it IS possible to create images of dumped ROMs, but I would advise that you make sure the NB you create is bigger than needed so as not to fill it completely.
All Working Beautifully.
1. I Took The Part02.raw Of A Dumped ROM And Dumped All The Files Using "viewimgfs" from the imgfsTools
2. I Created imgfs_raw_data.bin File From A Random AKU 3.3 OS.nb File Using "aWaiter".
3. Then I Created imgfs_raw_data.bin From The Dumped Files Using "buildimgfs" from the imgfsTools, This Overwrites The imgfs_raw_data.bin File Created In The Previous Step.
4. I Then Merged My imgfs_raw_data.bin With The OS.nb From Step 2 File Using "aWaiter".
5. Then I Created The nbh File Using The Orange Splash Screens And The Romanian EXTROM Using dutty's Rom Koch
6. Finally I Added It To The CustomRUUUpdater Created By Olipro.
And Then Flashed It. Now I've Unlocked The ExtRom Im Going To Add In The UK Files And HardReset.
Links To The Installer
Torrent - http://www.mininova.org/tor/608219
Megaupload - http://www.megaupload.com/?d=V2JTBWSZ
Cheers
hi
i have a dead m3100 and i read that i need a shipped orange uk rom to give live to my hermes. with this rom is this possible? my BT is 1.06 and my m3100 stops in the spash screen. regards
ventinho said:
hi
i have a dead m3100 and i read that i need a shipped orange uk rom to give live to my hermes. with this rom is this possible? my BT is 1.06 and my m3100 stops in the spash screen. regards
Click to expand...
Click to collapse
currently a shipped Orange UK ROM doesn't exist, and we don't have the capabilities to produce signed files... but since it seems your bootloader is intact, I would suggest you try the KITL trick described on the wiki
mousey_ said:
All Working Beautifully.
I Took The Part02.raw Of A Dumped ROM And Dumped All The Files Using "viewimgfs" from the imgfsTools
Then I Created imgfs_raw_data.bin From The Dumped Files Using "buildimgfs" from the imgfsTools.
I Copied An OS.nb From The AKU 3.3 Test ROMs Into The Folder Then I Merged My imgfs_raw_data.bin With The OS.nb File Using "aWaiter".
Then I Created The nbh File Using The Orange Splash Screens And The Romanian EXTROM And Added It To The CustomRUUUpdater.
And Then Flashed It. Now I've Unlocked The ExtRom Im Going To Add In The UK Files And HardReset.
Links To The Installer
Torrent - http://www.mininova.org/tor/608219
Megaupload - http://www.megaupload.com/?d=V2JTBWSZ
Cheers
Click to expand...
Click to collapse
So you dumped a ROM from a phone and merged it with a shipped ROM that was AKU 3.3? Was the "phone ROM" AKU 3.3 also, and, did your default internet connections remain after flashing?
great stuff guys, you rock!
@jokinawa
When I Say Merged What I Mean Is I Use The Shell Of An AKU 3.3 OS.nb File. None Of The AKU3.3 Code Remains Its Just A Container For The Orange Rom To Live In. When You Flash It You Only Flash The Orange Part, Yes All My Settings Are Now The Original Orange Settings Whithout Having To Add Anything.
I Hope That Explains Things Better. I Added This Info To The Wiki.
Are There Any Other Providers Who Haven't Released An Original ROM? I May Create Installers If You Need Them.
Cheers
mousey_ said:
@jokinawa
When I Say Merged What I Mean Is I Use The Shell Of An AKU 3.3 OS.nb File. None Of The AKU3.3 Code Remains Its Just A Container For The Orange Rom To Live In. When You Flash It You Only Flash The Orange Part, Yes All My Settings Are Now The Original Orange Settings Whithout Having To Add Anything.
I Hope That Explains Things Better. I Added This Info To The Wiki.
Are There Any Other Providers Who Haven't Released An Original ROM? I May Create Installers If You Need Them.
Cheers
Click to expand...
Click to collapse
If I understand it correct... then this is great...
Does this solution mean that if I upgrade to xda live, i can get back to the original rom??
Does it mean that i can claim my waranty if the phone is broken (not software only hardware?)
T-mobile Netherlands did not bring out any ROM for the Tytn (VarioII)
What can I do to bring the ROM files to you?
-------------------------------------------------------------------
Sorry for the very very bad english... I speak Dutch!
I've Backed Up All The Hermes FTP Folder, But Sadly I Don't See A T-Mobile Netherland Dump, Theres 2 WWE Ones In There If You Want I'll Create An Installer Out Of That For You.
Cheers
smarty77 said:
If I understand it correct... then this is great...
Does this solution mean that if I upgrade to xda live, i can get back to the original rom??
Does it mean that i can claim my waranty if the phone is broken (not software only hardware?)
T-mobile Netherlands did not bring out any ROM for the Tytn (VarioII)
What can I do to bring the ROM files to you?
-------------------------------------------------------------------
Sorry for the very very bad english... I speak Dutch!
Click to expand...
Click to collapse
if you dumped the OS from your Hermes onto your hard-drive, then yes.
also, as I said before... remember to use as large an OS.nb as possible.
Currently I'm looking into modifying the size of the OS.nb itself; hopefully this can be done without generating any bad blocks (even if the attempt fails), but I'll get back to you on that.
Offtopic, but mousey_, why are you upper casing all words in your messages?
Olipro - superb work, keep it up, but get some sleep too!
V
Sleep? What's that?
... wait ...
Oh, I remember now...
Man I really miss it!
ViJay, why are you so cruel as to remind of of such a thing?
vijay555 said:
Offtopic, but mousey_, why are you upper casing all words in your messages?
Olipro - superb work, keep it up, but get some sleep too!
V
Click to expand...
Click to collapse
mousey_ said:
All Working Beautifully.
I Took The Part02.raw Of A Dumped ROM And Dumped All The Files Using "viewimgfs" from the imgfsTools
Then I Created imgfs_raw_data.bin From The Dumped Files Using "buildimgfs" from the imgfsTools.
I Copied An OS.nb From The AKU 3.3 Test ROMs Into The Folder Then I Merged My imgfs_raw_data.bin With The OS.nb File Using "aWaiter".
Then I Created The nbh File Using The Orange Splash Screens And The Romanian EXTROM And Added It To The CustomRUUUpdater.
And Then Flashed It. Now I've Unlocked The ExtRom Im Going To Add In The UK Files And HardReset.
Links To The Installer
Torrent - http://www.mininova.org/tor/608219
Megaupload - http://www.megaupload.com/?d=V2JTBWSZ
Cheers
Click to expand...
Click to collapse
how you create the nbh file?
I Used dutty's nbhtool To Create The nbh File.
Cheers
ok mate thanks a lot.but i have another problem.when i use the command BuildImgfs i get this windows xp message :"BuildImgfs.exe has encountered a problem and needs to close. we are sorry for the inconvenience", and i can t continue the proccess.what the f..ck is wrong?
i must say that you are amazing.you did the unexpected:you gave life to dumped roms.WAY TO GO MATE....
thanks in advance.
Im Having The Same Problem. And I Can't Find Out How To Fix It. When I Do I'll Let You Know.
What Dumped Rom Are You Using?
Cheers
rom dump..
Ok I'm going to dump my rom... can someone tell me, when I dump my ROM is it important to empty my device (hard reset??)... I dont wanna throw my private data on the streets
Or does the rom dumper only dump the rom and dont touch the active part of the device?
I have dumped my ROM and now??
I did the rom dump before i did the upgrade to xda live 2
Olipro can you help me to create a dutch T-mobile recover ROM?
I do not really know how that works (Instructions would be nice!), but as far as i understand that, you can read out the rom from the Hermes to do a backup eg. for XDALive?
T-Mobile Germany even has no shipped rom! Would be nice to construct it!