Related
finally i got the most turn off things i faced in 2005 to back me up to 2003 but after i installed 2005 for the 4th time & desided to stick with it untill i either solve the problem or microsoft will post solution
1. Etisalat Settings for mnet & MMS
(everytime you install them they somehow crash the original DB of messaging where you will not be able to open your mesages anymore untill you do a format
2. and most importantly Arabic reading writing
after long time spent to fix those problems i finally got them working, see screen shoots
yeah ok , great but how u fixed the issues ?
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Rabia said:
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Click to expand...
Click to collapse
Post a cab or tell us what you modified in the registry!!!
Waiting, thanks! :?
Oh something else I noticed the radio rom is 1.08.00, can you dump it?
PC) folder, take a copy of your registry after pasting the file & before softreseting the the device, then reset your device, if it will ask you then if you want to run few DLL files acept all of them, then take another copy of your registry & store it in a differant file, now go to your programs & you'll find arabizer file there in which one of them is english name, another one is arabic as '7ayarat & the 3rd one is arabic letters but mirrored in reverse, this will be always your indication if arabic is now working fine, click on this file, it will load couple of other DLLs but will give you some error message about an AOP????? file, don't mind it, now got to your control panel, (Setting) of your mobile & go to the settings Tab, again it will ask you to load some file.cpl say yes, soft reset your device with a software for soft reset not through the pen, then it will load, if you get an error about some file couldn't be loaded just reset few times & it should work, if you lost you signal in gsm, load the first registry file & softreset your mobile again, it will ask you to load some dll file again accept them then go to the settings to load the cpl file, then reset , if this doesn't work load the second resitry file & do the same proccess untill the file with the names reversed is corrected, now enjoy arabic on your system.
اود التنبية على انني لست مسؤلا عن اي مشكلة تطرأ على جهازك و العملية متعبة جدا
PS. if some get this way working for him i please him to put it in a simplified way because unfortunatly i have too little time to spare on rewriting it in an organized way, but once it worked i had to post it here because this is the best site in the world for PPC's & they deserve the best
Thanks mate I'll give a try later on
now that's interesting , thank u
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
guys i heared someone tried it withought backing up the registry & it worked perfectly fine, remaining only is the camera & record button & this should be it for me
i think the camera is the last problem , buttons are working fine 8)
Rabia said:
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
Click to expand...
Click to collapse
sadly it didnt work for me,the device kept hangings on the splash screen,I tried it with wireless on and off, i did hard reset 5 times (2 with clear registery option) but nothing worked,I also upgraded to Radio 1.17 but still didnt work,I couldnt find out what's going wrong (I get prompt to overwrite 3 files while copying them into windows folder) WM2005 1.50h, Radio 1.14 then 1.17
well am not sure but regarding the hard reset only do the clear registry hive option without the format,
hi guys!
we are working for the localize Himlaya WM5.0 to Chinese and Japnese.
On the previouse OS, we need Font and registry, and also need wince.nls which support to encoding to our languages.
without replacement wince.nls, the inbox and IE cant encode to ours.
Usual, we got the wince.nls which has our lamguge support from the device of Japanese or chinese, or take from SDK emulator, or make it ourseleves with MS Platform Builder.
Till the version of WM2003se, easy to replce it.
But new OS of WM5.0, replacement of wince.nls can not be effected, even it was replaced firmly. the OS seems to be ignor that!
@On the Himalaya WM5.0, Some version such like 1.6b, 1.6h, 1.6i can get encooding with new wince.nls, but other version of WM5.0, it was not be able...cant find the reason yet.
@On the Blue Angel WM5.0, also it was ignored by OS
@On the Jasjar just we got, also it was ignored..........
We need find some solution of this system which ignore the replacement of wince.nls.
i already work for that more than 5days ........
I think to localize to Alabian, you guys will have same problems.
Example some of you can replace wince.nls, some of you can not get it.
so if you got some information, please exchange it about that, of course we also let you know if we got it!
Thanks guys!
following is our thread about localize to Chinese / Japanese..
You may know what happened on new OS.
http://forum.xda-developers.com/viewtopic.php?t=24781&highlight=
here it is guys
did it
check it out
http://forum.xda-developers.com/viewtopic.php?p=160111#160111
1.6c
yes. I am using WM5 1.60C WWE, I can not replace the wince.nls in rom with new one.
this is again a simplified version of installing arabic in your WM2005, just install both attached cabs in there sequence & everthing should be working fine
PS am not resposible if it crashes your device but so far it haven't crashed min
to Replacement wince.nls
PLS install this cab,
and place your wince.nls onto \Temp folder
then soft reset. you can replace wince.nls
<exactry saying, not relace.enable to read wince.nls from \Temp frolder>
Rabia, what's so different about your arabizer version?
ramram said:
Rabia, what's so different about your arabizer version?
Click to expand...
Click to collapse
its the same as my earlier version but before people comlaint about arabic keyboard not getting installed & the need of using a 3rd party arabic keyboard for it to work, also some people had trouble over writing few files & so HOPFULLY this makes the installation far more easier untill Mr Imaginet company decides to develop a fully intergrated 2005 arabizer
Imaginet already created the arabizer for 5.0, but they didn't release it yet as you can see in the JasJar arabized version, we have a new built of arabizer
Hi.
I had windows mobile 2005, but the first version that it was upload here. Now I have changed to the latest that I have found in buzzdev but I´ve got some remaining software that don´t works... for example, I´ve got some icons of spb pocket plus, but if I try to execute it, I can´t because problems of dependences erased or something like that...
The question is: How could I cleam completly my memory to have my new windows 2005 totally new in my XDA II?
Thanks for all.
salu2
scsssd said:
Hi.
I had windows mobile 2005, but the first version that it was upload here. Now I have changed to the latest that I have found in buzzdev but I´ve got some remaining software that don´t works... for example, I´ve got some icons of spb pocket plus, but if I try to execute it, I can´t because problems of dependences erased or something like that...
The question is: How could I cleam completly my memory to have my new windows 2005 totally new in my XDA II?
Thanks for all.
salu2
Click to expand...
Click to collapse
In doubt read this thread (probably again ?) http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=6594&catid=26
Try this part (it always helped for me .... and I installed three different ROM in the last seven days ... really annoying by the way :roll: )
10. Now you have to hard reset your device.
Press simultaneously: Reset Button + CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(to select items use Record Button, to change values use Camera Button)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
(to set the options the way mentioned is importatnt)
Hope you have more luck with your ROM
best regards
Shrek
Hi.
Yap, I think that I´m gettin´ stupid with my tests at university, and because of this, then I come back to play with my XDA II and I can´t think clearly...
It worked perfect. Now I´ve got the brand new w2k5 1.65b.96 flowin´ like water...
thanks 4 all
salu2
Hi,
I have an XDA O2 (Wallaby) which I got from a friend of mine who used it without a problem in its life and now I am stuck with a flashing O2 XDA.
Let me try to best describe my problem.
I had copied some of my excel files onto the O2 and then I had a distinct feeling that it had gotten to be much much slower.I am not too sure if this is the cause.
I was not using it as a phone but one day I slipped in my SIM card so as to surf the net and it just would not connect via GPRS and after that it had become very slow hanging every once in a while so I did a soft reset but it still was slow and the GPRS would not connect neither did it detect my phone service provider.I used to surf prevously through GPRS without any problems.
Then I did a hard reset and it just wouldnt work after that it would start with the blue O2 screen and begin to flash on and off with a blank screen with a small keyboard icon in the lower right hand corner presumably the affected excel file....I think my XDA has a virus now please help me out from here.
I tried doing a hard rest and I depressed the reset button on the RHS side that's it(smaller hole bigger one for soft reset) Once I press down with the smaller end of the stylus I press it again then the blue screen with the O2 logo comes to life it stays on for sometime and then a "tink" noise comes and the busy sign comes as if it has just opened an application ..a blue small band on the top most corner and a small keyboard icon on the lower rhs hand of the screen then the screen begins to flash ten seconds apart for quite some time...infact that all it does before shutting down and restarting all over again.
Is there any other way to do a hard reset.What is the right way?? as on one of the forums said that I should depress the power button and the soft reset button at the same time for about 5 sec I tried the hard and something called the WALLABY Bootloader V5.15 came on the screen with the message 'WAIT' after a couple of nail biting seconds I got an error saying GSM ERROR the screen was a clourful white red green and blue strips....what happened??
Then I proceeded to depress the soft reset button it restarted with the usual error of a program being opened and the screen flashing..
Hope to get a reply from this forum.
Take care
Ciao
Al
flashing screen
almaal have you tried flashing with a sd card? the GSM error indicates that the radio unit is corrupt. Have you attempted to upgrade the rom? If u have was it programme A or Programme B? by the sounds of things you have. Does the power light light up? let me know the answers to this and i might be able to help
have you tried flashing with a sd card? the GSM error indicates that the radio unit is corrupt. Have you attempted to upgrade the rom? If u have was it programme A or Programme B? by the sounds of things you have. Does the power light light up? let me know the answers to this and i might be able to help
Hi,
1st off thanks for your reply....
I have downloaded Programme A to upgrade my rom but cant seem to get it loaded onto the SD card. I unzipped osimage.exe and tried to store it from my PC to SD card but cant seem to do it....furthermore I was advised by friends out here not to be a braveheart and venture to kill my XDA but still I'd like to try...you see I'm not to conservant with the software bit and I'm only a end user...
Could you give me a step by step guidance to get the software loaded to the SD card via a card reader and then flashing the rom..
Hope to hear from you....
Alvin
flashing from sd card
Firstly make sure u have winzip winrar or some other compression software on the computer then right click on the programme A exe file and click open with whatever compression program u have i use winrar so i will say open with winrar. You now need to extract all files into a folder.
Once you have done that open up OSimagetool and on source browse for the folder u just extracted the programme A to and look for nk.nbf,you will need to tell it to look for nbf files and not nb1 files , which is the default and select it,it is in the english folder. In the destination u need to select your sd card which should be in a card reader as u cant program it directly to the XDA or via the memory card, once you have done this click copy. when that is finished you need to take the card and place it in the xda and do a cold reset . A screen will appear saying SD Download click the action key on the pad to commence flashing. after a few minutes it will inform you that it has finished. remove the sd card and Cold boot again then once the wallaby has rebooted back to your bootloader screen soft reset it,ignore the gsm error now cross your fingers while you wait to see if it reboots. If it reboots ok set up activesync again and run the radio upgrade. By the Way any info on the sd card should be saved before attempting this as it will be overwritten by the osimage tool. Also only the xda can read the card , the pc will say it needs formatting Good luck
Any Luck
Did you have any luck reflashing with a new rom almaal?
I have followed the procedure. The system rebooted and I got the GSM error which I ignored and continued the process. The system rebooted properly i.e I get to see the start menu and the calendar, but the device does not get detected by activesync. Another thing to note is that the system has become terribly slow. And although the backlight is switched to on it the device keeps on flashing. What do I do now?
almaal said:
I get to see the start menu and the calendar, but the device does not get detected by activesync. Another thing to note is that the system has become terribly slow.
Click to expand...
Click to collapse
That´s quite normal on a device with the gsm error.....
Stefan
wallaby xda flashing
format the sd card then and copy the radio upgrade over to the card. not as an exe file almaal, right click it again then extract files and copy the files over , if u have a cab file including then just use file explorer on the xda to navigate to the storage card and click on it and it will install. If not then click on the rsupgrade.exe. Hope you have more luck with this than i have i had . Good luck
wallaby xda flashing
format the sd card then and copy the radio upgrade over to the card. not as an exe file almaal, right click it again then extract files and copy the files over , if u have a cab file including then just use file explorer on the xda to navigate to the storage card and click on it and it will install. If not then click on the rsupgrade.exe. Hope you have more luck with this than i have i had . Good luck
Not charging I think
Hi I dont know what to make of it but now my wallaby came to life with the rom that I flashed but it seems to have gone crazy. Let me best try and explain.
1) The green charge light does not come on when I put it onto the cradle or plug it directly for a charge.
2) It does not make any sound, no beeps no nothing....but when an mp3 is put on it plays
3)The back light does not come on which is enabled but does not work I have to work with a dark screen...is there a brightness control which can be adjusted...its like its on power save mode or something..
Now its back flashing the O2 screen again its become terribly slow and unstable and I have to do a constant reset. How do I know which is my ROM to flash, I've flashed the R.30.07 ENG Rogers (4700 kB available) from http://www.romkitchen.de/WM2003/form.php.
I somehow feel that my O2 is not charging
Can you make any sense of this ..
Alvin
Hi
And another thing is that I trird copying the radio upgrade over to the card and then clicking on rsupgrade.exe. The upgrade fails at 1% giving an error as follows:
Flash Failed!
Press ok to restart your device.
What could be the problem? and how can I fix it?
Thanks
See http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Regards,
Neil.
Flash Failed
Neilius you have obviously not been through this process, no offence, but as i have tried to ask with a few posts on here it seems when the radio upgrade fails the wallaby refuses to charge. Which i think is the reason the radio upgrade always fails at 1%. Unfortunately nobodys knows or is even interested in finding out why
Flash Failed
Neilius you have obviously not been through this process, no offence, but as i have tried to ask with a few posts on here it seems when the radio upgrade fails the wallaby refuses to charge. Which i think is the reason the radio upgrade always fails at 1%. Unfortunately nobodys knows or is even interested in finding out why
No Charge no back light
Hi,
I have flkashed my rom but I cant get the RSU upgrade done.Now I have a running O2 with no backlight and it does not charge....where do I go from here....please reply my life is a meess without my O2 is it time for a change...howz the O2 mini or the imate JAmin fed up with this GSM error.
Alvin
drop all files from folder (1) to your windows on your smartphone.
drop all files from folder (2) to your applicaton Data/home on your smartphone.
drop all files from folder (3) to your program files/microsoft. media plyer on your smartphone.
-----------------------------------------------------------------------------------------------------------------
1. replace all file that are allready
2. reset your smatphone trun back on
3. change you theme
3. change your windows media skin
-----------------------------------------------------------------------------------------------------------------
to get your wm5 icons back you'll have to hard reset your smartphone
-----------------------------------------------------------------------------------------------------------------
ONLY FOR QVGA WM5 SMARTPHONE
-----------------------------------------------------------------------------------------------------------------
ok heres windows live and its home sceen
1. install WindowsLive.Smartphone_50_arm.cab
2. dorp WindowsLive.jpg to your windows folder on smartphone
3. drop windowslive.home.xml to your applicaton data/home folder on smartphone
-----------------------------------------------------------------------------------------------------------------
for more help plz go here http://www.pxdxa.com/read.php?tid=36631
and here http://www.pxdxa.com/read.php?tid=36889
anyone tried this yet.
Does doing a hard reset alter the application free settings or anything else, for that matter?
Just checked and Folder 3 is showing empty when I unzip it onto my PC before transfering. Is this correct?
also, having unzipped the files I am also unable to delete the sound file. It tells me one of the files is in use?
Are we sure the Crossbow tweak works on the Monet and that none of these files is corrupted?
Press-E-Dent said:
anyone tried this yet.
Does doing a hard reset alter the application free settings or anything else, for that matter?
Just checked and Folder 3 is showing empty when I unzip it onto my PC before transfering. Is this correct?
also, having unzipped the files I am also unable to delete the sound file. It tells me one of the files is in use?
Are we sure the Crossbow tweak works on the Monet and that none of these files is corrupted?
Click to expand...
Click to collapse
-------------------------------------------------------------------------
ok none of the files are corrupted this dose work on monet as i own one.
it wont hart your phone just make sure you unlock it frist. then install NotSignedOff.cab to your phone
for more help plz go here http://www.pxdxa.com/read.php?tid=36889
and here http://www.pxdxa.com/read.php?tid=36631
Thanks rickwyatt.
Just aout of interest is this Only a 'LOOKS' thing or does it add more useful features?
Perhaps I did it wrong but when I unzip the files I end up with 3 folders (Numbered 1-3) PLUS one called Sounds.
Thanks for the theme
The theme worked in my startrek. But, i don't see the alarm icon on whenever i reboot the phone though i set the alarm on. Any idea?
i have tried this on my monet, the first time i followed the instructions as listed here only to fine the phone hangs making strange noises after the sim code screen.
i have carried out a hard reset on my phone and tried again, this time using only the shelres dll from the first folder, no other dll's but all the other files,
i restarted the phone and it started fine however there was nothing in the start menu - one quick restart and all the new icons are present.
looks lovely
thanks
It also worked great on my Qtek 8500, without any problems at all!
Thank you very much!
EDIT: Well, the alarm icon does disappear when I reboot, but as I had WM2003 before,
I'm kind of used to not see the alarm icon on the homescreen! LoL!
My_Immortal said:
It also worked great on my Qtek 8500, without any problems at all!
Thank you very much!
EDIT: Well, the alarm icon does disappear when I reboot, but as I had WM2003 before,
I'm kind of used to not see the alarm icon on the homescreen! LoL!
Click to expand...
Click to collapse
Plz help me how did you do it. I am using a qtek 8500 and flashed to cingular rom. I tried to install this pack for 3 hours but everytime, phone locks right after sim pin and stupis error sounds keep coming. I can not pass this screen. I have unlocked my phone and installed certificate sşgn patch. can you write what should I do in order. I could not find where is my mistake
hakan439 said:
Plz help me how did you do it. I am using a qtek 8500 and flashed to cingular rom. I tried to install this pack for 3 hours but everytime, phone locks right after sim pin and stupis error sounds keep coming. I can not pass this screen. I have unlocked my phone and installed certificate sşgn patch. can you write what should I do in order. I could not find where is my mistake
Click to expand...
Click to collapse
use this then install the icons
Thanks for your windows live
rickwyatt said:
drop all files from folder (1) to your windows on your smartphone.
drop all files from folder (2) to your applicaton Data/home on your smartphone.
drop all files from folder (3) to your program files/microsoft. media plyer on your smartphone.
-----------------------------------------------------------------------------------------------------------------
1. replace all file that are allready
2. reset your smatphone trun back on
3. change you theme
3. change your windows media skin
-----------------------------------------------------------------------------------------------------------------
to get your wm5 icons back you'll have to hard reset your smartphone
-----------------------------------------------------------------------------------------------------------------
ONLY FOR QVGA WM5 SMARTPHONE
-----------------------------------------------------------------------------------------------------------------
ok heres windows live and its home sceen
1. install WindowsLive.Smartphone_50_arm.cab
2. dorp WindowsLive.jpg to your windows folder on smartphone
3. drop windowslive.home.xml to your applicaton data/home folder on smartphone
-----------------------------------------------------------------------------------------------------------------
for more help plz go here http://www.pxdxa.com/read.php?tid=36631
and here http://www.pxdxa.com/read.php?tid=36889
Click to expand...
Click to collapse
your windows live save my ass.Thanks alot.
hello!
first of all, thanx for this great theme and icons. that's cool !
but, on my samsung i 710, it's impossible to copy the files on my windows folder. my pda says "impossible to replace the ****.dll because your are not autorhised to replace this file"
how could i overpass this problem?
Thanx for your help
Mary
marymure said:
hello!
first of all, thanx for this great theme and icons. that's cool !
but, on my samsung i 710, it's impossible to copy the files on my windows folder. my pda says "impossible to replace the ****.dll because your are not autorhised to replace this file"
how could i overpass this problem?
Thanx for your help
Mary
Click to expand...
Click to collapse
try copying those dll's through ActiveSync
i blockt my phone with this .......what can i do
**** iu block my phone tell me pleasae what can i doi
alexwittmann said:
****** iu block my phone tell me pleasae what can i doi
Click to expand...
Click to collapse
You should do a soft reset on your device.....
alexwittmann said:
**** iu block my phone tell me pleasae what can i doi
Click to expand...
Click to collapse
Hakim Rahman said:
You should do a soft reset on your device.....
Click to expand...
Click to collapse
Watch you language, Swearing will not be tolerated, This is your final warning. Also if you quote somebody then please remove the Swear word.
hello everybody,
yesterday i flashed my xda neo (wm5) with the Transformer1.1 distribution from PDAVIET. Very nice. I like this style!!!
After installation i experienced some small problems that took me half a night to solve
But i would like to share my solutions after this horrible trip of searching...
1.) Problem: I tried to copy my Contacts from SIM -> Phone. No success. Even to start Contacts was impossible ( i saw the screen for about 1 sec or so).
Solve: Delete or rename the pim.vol file in the ROOT directory of your Prophet. That fixed the Problem.
2.) Problem: TimeWizard Notification always pops up everytime you turn on/off the scree or after reboot.
Solve: Download the free tool CheckNotify (can be found here: http://www.scarybearsoftware.com/product_detail.php?productname=checknotify ) and delete the notification. It is a deprecated notification from wm5. Dunno why it is still available in wm6 roms.
Thats all i can tell you, up till now. I additionally try to solve the problem of broken links in Programs like Modem Link (that i would like to use), Pocket MSD ( that i wouldn't miss), Terminal Service Client and ZIP functionality.
If anybody already has a fix for this i would be happy to know it
Otherwise i hope will soon be back with the fix.
sp1ke
sp1ke81 said:
hello everybody,
yesterday i flashed my xda neo (wm5) with the Transformer1.1 distribution from PDAVIET. Very nice. I like this style!!!
After installation i experienced some small problems that took me half a night to solve
But i would like to share my solutions after this horrible trip of searching...
1.) Problem: I tried to copy my Contacts from SIM -> Phone. No success. Even to start Contacts was impossible ( i saw the screen for about 1 sec or so).
Solve: Delete or rename the pim.vol file in the ROOT directory of your Prophet. That fixed the Problem.
2.) Problem: TimeWizard Notification always pops up everytime you turn on/off the scree or after reboot.
Solve: Download the free tool CheckNotify (can be found here: http://www.scarybearsoftware.com/product_detail.php?productname=checknotify ) and delete the notification. It is a deprecated notification from wm5. Dunno why it is still available in wm6 roms.
Thats all i can tell you, up till now. I additionally try to solve the problem of broken links in Programs like Modem Link (that i would like to use), Pocket MSD ( that i wouldn't miss), Terminal Service Client and ZIP functionality.
If anybody already has a fix for this i would be happy to know it
Otherwise i hope will soon be back with the fix.
sp1ke
Click to expand...
Click to collapse
Those problems are allready solved .. You just need to hard reset your device after flash..
It's better for your health if you would read the many threads on this forum. Al the probs you mention are caused by not doing a hard reset after flashing the WM6 ROM. You will encounter ActiveSync problems as well if you continue to use your Prophet in this state.
If you are confused about how to do a real, proper Hard Reset...
thanx for the hint. Yes - i didn't do HardReset. sry for the posting...