Just upgraded per DCS's instructions and am most pleased with the SE upgrade although my radio shows Radio verison 1.14.00 so I am hopefully assuming therein lies the problem.
I get no phone ring I've tried all the ring options from vibrate all the way up to ring to vibrate then ring, etc. but everytime I try to call my cell phone it never rings on the phone just eventually goes to voice mail. Anyone have any ideas or how to upgrade JUST the radio version to the current 1.18?
My PDA information if this helps is:
TMobile MDA II
ROM verison 2.06.00WWE
ROM date: 06/14/04
Radio version: 1.14.00
Protocol version: 1337.24
ExtROM version: (this has always been blank even prior to upgrading)
Thanks in advance for some input.
Don't be serious.
Firstly,you need to make sure that sound problem occur with ringtone only
What about system sound ? if it's fine, problem must be in ringtone only.
If it's ringtone problem, you need to check your Ext ROM about MIDI.cab file(use extended ROM viewer or extended ROM unlocker)
If it doesn't have MIDI.cab, try to use my attach file.
Secondly, if problem not occur only ringtone, try to flash ROM again.
If you still need radio ROM 1.18, you can use search to find radio1.18 posted by mamaich.
or just simply you may try flash with ROM 2.06 from http://forum.xda-developers.com/viewtopic.php?t=13588&start=0 (look at mamaich comment, he provides ROM 2.06 file)
Hope you can fix this problem.
Nope not the ring tone. System sound works fine and can test ring tones in the Phone utility. All sounds work as expected with the exception of course of the phone ringing when a call is received.
What's odd is I can hear in my BT Jabra 250 headset the ringing to answer it but the phone never rings or vibrates. I also get a notification that I missed a call but once again never a ring or vibrate.
Tried reflashing the ROM via Sin's setup twice already but to no avail. My unit now shows but the problem is still there.
ROM version: 2.06.00WWE
ROM date: 06/14/04
Radio version: 1.18.00
Protocol version: 1337.38
ExtROM version: still is blank
Are you using Wisbar Advance? There is a problem with this preventing the ring tone in SE devices.
I've also found that mine (2.06) doesn't ring while in landscape.
As a matter of fact I just upgraded to Wisbar Advance 2 (paid for it to boot) and I've noticed that if I don't exit Wisbar then I cannot rotate the screen without corrupting the screen.
I just reflashed and ring tones are working fine. I will continue installing my apps and test a call after each installation to determine the problem. But since all my apps have worked fine with the exception of WisBar then I think you hit the nail on the head.
I will install that shortly and see what results I get and report them here.
Thanks
Wisbar Advance 2 kills phone & corrupts screen in WM03SE
Well after two days of reflashing my PDA and trying to narrow down the problem the good people at XDA.Developers forum suggested the problem could in fact be WisBar Advance.
How right you are. The solution after two days and half a dozen reflashes was to simply remove WisBar Advance v2 and all is well again. This after purchasing what looked to be a fine upgrade to an already outstanding program.
Problems to be aware of with Windows Mobile 2003 SE Phone Edition using WisBar Advance v2 are the following:
1/ Loss of phone ringing
2/ Corrupt screen when rotating
If those two issues can be resolved then this will again reside within my PPC. Now to work on getting a refund since this has been a nightmare that until my refund is issued is still ongoing.
Related
Hi
Ive just been on teh orange site, and I see there is a new ROM available http://web.orange.co.uk/story/sm_1047574.html
The new version has an operator version 3.661.230 (MMS version). But my SPV does not seem to have an operator version
Currently I'm running:-
Rom version 1.60.00WWE
Rom date 12/03/03
Radio version: 1.10.00
Protocol version: 1337.18
ExtROM version: 1.60.38
Is it worth upgrading?how will I benifit?
Cheers
JustinP
Hi,
Checked out the new upgrade from Orange and it works perfectly on my SPV M1000.
The benfits of upgrading are that you will be able to send MMS messages from your phone without having to configure everything yourself (which I had to do!)
The other benefits (apparently) are better radio and GPRS, but I haven't noticed any difference yet.
Also, while I was upgrading, I had a message saying there was a problem and to start again. Don't worry if this happens as I reconnected the phone and it installed fine.
Hope this helps!
Thank you!
First of all THANK YOU justinp for spotting this and sharing it with us!
I've also been calling Orange trying to find out about updates, but unfortunatly with no success.
Second to all:
a) I share justinp question, but my setup is a bit older:
Currently I'm running:-
Rom version 1.52.00WWE
Rom date 10/23/03
Radio version: 1.05.16
Protocol version: 1337.16
ExtROM version: 1.52.56
I could not find anything looking like the 3.661.230 where they indicated it.
b) Once I am going through the asshole of a a ROM upgrade, are there real advantage in going for the imate 1.72 update and going through a slightly more complicated procedure?
Just to put into context I already have installed thanks to this forum an SMS SW version I am happy with and I want to buy a BT GPS in the next two month so if you know for sure that it is not going to work either with my ROM or the new one from Orange please let me know!!!
THANKS!
Chris
Orange M1000 Upgrade ROM Thur 12th Aug 2004... Problem
Hi,
I upgraded my ROM to the latest from Orange UK and my bluetooth headset (Logitech) paired OK and I can hear the people talking, but they CAN'T hear me!
Anyone had this type of problem before? I have used the MMS version. Today I will try the NON-MMS version and see if that allows 2 way communication via Bluetooth
Thanks
Nitesh
I just upgraded my ROM and now I cant see the STORAGE folder. Anyone else have this issue?
Storage folder missing
I too upgraded my M1000 and when I did a restore from Sprite - It too made my storage and storage card disappear. In the end I just did a hard reset and manually installed my programs and did not do a restore.
Re: Storage folder missing
nbharadia said:
I too upgraded my M1000 and when I did a restore from Sprite - It too made my storage and storage card disappear. In the end I just did a hard reset and manually installed my programs and did not do a restore.
Click to expand...
Click to collapse
Hi,
You say you have problems with the Storage/Storage card going missing - when you performed the upgrade, were these still visible until you restored things with Sprite because this might be the problem if you are restoring an old configuration with an updated ROM.
I haven't tried my phone with a Bluetooth headset, I got the MMS version, will let you know if I have the same problem, but everything is working fine on mine at the moment.
Hi
I have installed the upgrade, everything works as well as it did before, time will tell if there are any improvements.
After an upgrade dont do a restore as the old backup is not compatible with the new OS. Its just the way PPCs work. I'm afraid you need to re-install everything from scratch, it too me about 4 hours, but its done know.
Cheers
JustinP
m1000 rom
hi guys
any chance someone could post just the extended rom from the up grade cheers
To get the upgrade click on the link I posted in the first post of this thread
help
Just tried this update and received an error message.
Took the phone out of the craddle and performed a soft reset..
Screen still says "Serial V1. 03"
I cannot get it to do anything.
How do you perform a hard reset? Have tried pressing reset button with no battery (battery catch up and down) and tried letting the case touch the pins on the phone which can reset it.
TRULY HELP!!! PLEASE PLEASE HELP (please!)
With thanks
Dave.
yep ive just done the same,
yep ive just done the same, been trying for 1 hour now to get it running but no luck.
just spent an hour on to orange trying to explain the phone now neads replacing but they cannot send out till tomorrow.
lets hope it has the new rom installled or i may be in the same boat tomorrow
It now works!!! PHEW!!
Tried the hard reset & nothing happens.
What I did was hard reset then tried the update again... software now tells me that phone is now not compatible with the update.
I then repeated the above 17 panic-stricken times (both reset then update) and eventually it started the update process. Has now finally completed.
I was so worried!
GRPS is still flaky and still waiting for the MMS message sent to myself to go through (a bit slow).
Quick question for those who have updated
Hi!
Could any of you that have done the update please tell me what ROM version do you get after the update? 1.52, 1.60, the last 1.72?
Have u noticed any improvement with the use of BT (expecially with GPS).
Thanks!
Chris
After the update you will get
Rom version 1.66.00WWE
Rom date 02/20/04
Radio version: 1.10.00
Protocol version: 1337.18
ExtROM version: 1.66.230
So far I see no imporvements
Cheers
JustinP
Hard reset ???
I also upgraded my SPV with this ROM with MMS. I found no improvements, but 1 major problem. Sometimes the SPV is in suspend mode, i wait for several of minutes and want to push the power button, the device doesnt seem to react. Putting in the cradle isnt working also and taking the battery out and in again is also a failure. So the only sollution is to hard reset the m1000. Since the upgrade (2 weeks ago) i performed 2 hard resets. You guys also got the same problem? Or do you know how to fix this? I tried to upgrade my orange rom to the original Qtek 1.72 rom, but i got a message 120: error country code. So any ideas?
Urguntly need rom upgrade for spv m1000 orange uk
please can anyone kindly give me the link to download
SPV M1000 ROM UPGRADE SOFT.
REGARDS
SARO
Re: Urguntly need rom upgrade for spv m1000 orange uk
saro said:
please can anyone kindly give me the link to download
SPV M1000 ROM UPGRADE SOFT.
REGARDS
SARO
Click to expand...
Click to collapse
http://web.orange.co.uk/assets/sw/RUU_v1.1_OrangeUK_v3.66.1.200_Ship.exe
Here you go, although this ROM is quite old now (check the date of the original posts!!
I really miss my M1000, it was my first PPC Phone!
Fin
Thanks for that link.
I needed to restore my m1000 back to 2003SE after an experiment in upgrading to WM6 and realised I didn't have the ROM.
Cheers
J
Thanks
Thanks for the link. have been searching for the rom for about 1 month now.thanks thanks thanks
Dear all,
I have tested the WM2003SE (Version_2.06) for some days now and finally found out that one (or the combination) of these extra applications in the Extended Rom will surely KILL the phone functionality if you ever happen to soft-reboot the device while in landscape mode. Here is the list of suspected incompatibles.
- BTPSKeyUpdate_003
- cm_rm_map_o2_v3
- CprogHook.WM2003_2577
- DelAddStarMenu_092404.sa
- delshortcut
- LoadDialogInit_MS_10150402.sa
- startmenu_103wwe
I am absolutely sure that one of these will cause serious device hang once we ever happen to soft-reset while in landspace, but I'm not sure which one. So if any of you have these software installed in version 2.06, please try your best to aviod reseting while in landscape.
BTW, if you happen to know any of these software's intended uses, please also let me know since I"m not sure whether removing them can cause malfunction in other areas. Thanks
Hi there,
thanks for the alert. But i don have the problem like you said. I soft resetted my 2.06 more than 10x in landscape mode but still no reset/hang/idle/trojan virus.....
Guess i'm just a bit lucky!
:lol:
BTPSKeyUpdate_003 - cannot cause hang. It is used only once just after hard reset
cm_rm_map_o2_v3 - some O2 customisations. May cause hang.
CprogHook.WM2003_2577 - my program. Conflicts with some programs and may hang your device on boot (device simply stops responding to keys/stylus). To check this - delete \windows\startup\cproghook.exe and reboot. On most of devices it works fine, but have problems in landscape mode.
DelAddStarMenu_092404.sa - ?
delshortcut - ?
LoadDialogInit_MS_10150402.sa - this is a patch for 2.20CHS OS. Should not be used on other ROMs, but it should not hang your device.
startmenu_103wwe - ?
I've seen that removing SD-card during boot helps sometimes.
did any one faced this?
it happend twice!
my phone shows good signal reception but when some body calls in it will say "can not be reached" like it is off or no signal!
and i also can't make phone calls at that stage!
some thing is killing my phone!
i have tried both radio stack 1.14 and 1.18 and i happened in both.
now i am trying radio stack 1.14 from ROM 1.72! it seems it is not the same 1.14 from mamaich rom. by using hex editor i found that mamaich radio stack version is 1.14a!
what do you think guys?
BEWARE of changing ur radio stack.. 90% ur will have a dead phone once u wake up
Re: did any one faced this?
ammar said:
it happend twice!
my phone shows good signal reception but when some body calls in it will say "can not be reached" like it is off or no signal!
and i also can't make phone calls at that stage!
some thing is killing my phone!
i have tried both radio stack 1.14 and 1.18 and i happened in both.
now i am trying radio stack 1.14 from ROM 1.72! it seems it is not the same 1.14 from mamaich rom. by using hex editor i found that mamaich radio stack version is 1.14a!
what do you think guys?
Click to expand...
Click to collapse
Yeap, your suspicious is very true. Both of them are different. But how different is different would need mamaich to answer how he first got this radio stack!!
:lol:
i used 1.08 radio stack... no problems here.... downgraded it from 1.17
Microsoft Voice Command
Anybody encounter problems with MS Voice Command in WM2003SE ROM?
When I soft re-set the XDAII device, it sorts of hang the devices. Always need me to soft reset a few times. I've since remove it and soft reset is ok.
MS Voice Command in WM2003SE ROM
:arrow: MS Voice Command in WM2003SE ROM working great !
Now in Clubimate i found this:
Any idea?
i-mate_JASJAM_telstra_1.31.305.2_1.31.305.103_1.20.31.10_ship.zip
Date: 18/10/2006
What is the language on this version?
rom update
i think is english
ILIGCONS said:
Now in Clubimate i found this:
Any idea?
i-mate_JASJAM_telstra_1.31.305.2_1.31.305.103_1.20.31.10_ship.zip
Date: 18/10/2006
Click to expand...
Click to collapse
can you say what is new, please uploud that rom
mordof said:
can you say what is new, please uploud that rom
Click to expand...
Click to collapse
I have not installed it. I only downloaded it. I have no idea what is new. My guess is that the OP has not installed it either because he was sure of the language. How do I upload?
Uploaded to our FTP:
ftp://xda:[email protected]_1.31.305.2_1.31.305.103_1.20.31.10_ship.zip
editing the wiki now....
Language is english (WWE), it has bootloader 1.06 which will prevent you to flash any other rom unless you have one matching your CID.
Radio version is 1.20.31.10 which seems newer than any other rom.
Still missing information about OS build / AKU, rom date, and protocol... first person flashing it please update the wiki
ROM flashed, WiKi updated.
P
Can the radio version be extracted and uploaded? Would be nice!!
English language, ugly i-mate telstra bootscreen, nothing overly exciting in build to report - still AKU 2.3.
P
i was hoping aku 3.0. i guess i'll just stay with cingular v1.31 with aku 2.6
Now all we need is for someone to crack the HTTupgrade exe so those of us on the cingular ROM with no official carrier ROM to downgrade to can upgrade to this one!
pof said:
Language is english (WWE), it has bootloader 1.06 which will prevent you to flash any other rom unless you have one matching your CID.
Radio version is 1.20.31.10 which seems newer than any other rom.
Still missing information about OS build / AKU, rom date, and protocol... first person flashing it please update the wiki
Click to expand...
Click to collapse
I have a trion.
so i can update with this rom but after i can update only with the rom that have my CID?
thx
With the upgrade in radio, do you think my JasJam could see an increase in battery life considering the 1.16 radio absolutely destroyed my battery life?
Its looks like all the new roms are going to be 1.06, I would like to upgrade to this, but as I don't have a way back to 1.04 I will not risk it, as I don't have an original rom to go back to.
I hope we can find a solution for the CID in the near future to help.
modaco said:
ROM flashed, WiKi updated.
Click to expand...
Click to collapse
Thanks, can you also add the rom date, please? 1.31.305.2 ??/??/06
steiale said:
Can the radio version be extracted and uploaded? Would be nice!!
Click to expand...
Click to collapse
Done:
http://forum.xda-developers.com/showthread.php?t=280239
This rom looks the same as the one I got with my Jasjam off Telstra ( hence the boot up screen) and its dated in my device 09/08/06 this is most likely american date format.
So the rom is old
i think this rom is for Telstra users only here in australia so its no different from the original rom from imate.....it only has a few extra operator settings under Telstra provider......Telstra here in Australia are the main imate distributors......
Telstra ROM
I've had this version running on my device for 2 weeks now as I bought the Telstra iMate JasJam.
I don't know about the previous ROM, but this one is terrible; my device will crash, hang or start working in a weird manner all the time...
The most common problems so far:
-Sound stops working, will only vibrate. This happen if you switch to silent mode, when you get back to normal sound mode, it stays in silence mode until you reboot. this doesn't always happen. can't reproduce it consistently
-BT turns off by itself once in a while, you have to turn BT on in comm manager
-The most annoying: If you have a data session active (not transfering any data) and a BT connection active (like headset, GPS), then you can't receive a call. The person calling you won't even get to voicemail. it just hangs up on them. if you disconnect the data session or turn off BT then you can receive calls again
-Switching username in MSN will often make messenger crash, you have to kill the process and start it again
-Sometimes will hang for no reason: you need to press the reset button
Then you have the GUI weirdness which make you think: what did they drink the day they designed this software?
Like if you receive a SMS, it will show you an extract of it at the bottom of the screen, you'll get off the following choice:
-Reply on the left soft menu
-More on the right soft menu with the option (delete, call sender, Save as Read, dismiss)
What if I just want to read the full content in the Messaging application? you can't.
If you select Mark as Read immediately it doesn't mark the SMS as read in the messaging application and you still get the notification in the top screen. You have to do "Mark as Read" twice.
Something I miss from my symbian phone, if you have a bluetooth headset paired with a unit (or your car kit) when you answer a call using the BT headset button, the call goes to the BT headset, but if you answer using the device itself, it doesn't go on the BT. This is great if you want to take a personal call in a car for example, and don't want your passenger to hear what's going on.
On WM5, you can't control that. it aways goes to BT if the headset/handsfree is set.
When the keyboard is open, if you tap on a text field, the screen keyboard will show up (and text half of the screen). Why show a software keyboard all the time when you have a full qwerty keyboard available !? Sometimes the keyboard doesn't show up, but I'm yet to understand the logic behind it. it's not consistent
And then of course you have some inconsistencies here and there, like the device will stop working as it did 2 minutes prior. You try it again: bank it works.
I wonder if Microsoft or HTC have any QA !
Several months back, I was looking to upgrade my G3 Prophet (Imate Jamin). I had one serious problem with all the WM6 ROMs I've tried, as well as with Aserg's3.3 ROM.
The phone will intermittently not recieve calls. The caller is quickly diverted to voice mail, and I get no ring, no notification of a missed call, and no message waiting indicator. As a surgeon who's on call a fair amount, this was unacceptable. Problems with contacts or wifi settings I could work through.
I went from Fantastic Mobitz 1.1i to PDAViet 4.0.0.0.3 to Aserg 3.3 without resolution. I have tried Radio ROMs 2.20.21, 2.47.21, 2.61.21, and 2.69.21 without success in all of them.
In the end, I downgraded to the latest shipped WWE ROM, which was AKU 2.2. This has been fairly stable, but as I look at the newest Touch ROMS, I can't help but feel a new case of ROM envy coming on.
Has anyone had the same problem with the early Crossbow ROMs? If so, has it been fixed in the later ROMS? I know there are lots of people out there who have never had any missed call problems, so my question is only for those few people like myself who missed calls with early versions of WM6. Was this fixed in later versions? Specifically, which ones?
Much thanks,
Alan
Gave in to the temptation.
After waiting a few days for a reply, I couldn't resist - I flashed Prophet Touch X when it became available.
I love the ROM - Fast, nifty touch features, Cube, etc.
However, I still have the same problems - I frequently and intermittently do not receive calls, there is no missed call indicator or missed phone numbers showing.
Does anyone know the cause or a fix? I can't bear the thought of going back to WM5!
My device is a G3 Prophet (Imate Jamin):
IPL 2.20
SPL 2.20.0000
Protocol 4.1.13.24
OS 10.0.0.0
EXTRom Prophet Touch X
Alan
adsbar said:
After waiting a few days for a reply, I couldn't resist - I flashed Prophet Touch X when it became available.
I love the ROM - Fast, nifty touch features, Cube, etc.
However, I still have the same problems - I frequently and intermittently do not receive calls, there is no missed call indicator or missed phone numbers showing.
Does anyone know the cause or a fix? I can't bear the thought of going back to WM5!
My device is a G3 Prophet (Imate Jamin):
IPL 2.20
SPL 2.20.0000
Protocol 4.1.13.24
OS 10.0.0.0
EXTRom Prophet Touch X
Alan
Click to expand...
Click to collapse
Which rom do you use for step 1 ? try to flash with another NVID Flash step 1 or PV_temp then flash to WM6. otherwise you can try to change the radio rom to 2.19
If the problem still exist, i think your phone is having problem with the Radio hardware.
adsbar said:
After waiting a few days for a reply, I couldn't resist - I flashed Prophet Touch X when it became available.
I love the ROM - Fast, nifty touch features, Cube, etc.
However, I still have the same problems - I frequently and intermittently do not receive calls, there is no missed call indicator or missed phone numbers showing.
Does anyone know the cause or a fix? I can't bear the thought of going back to WM5!
My device is a G3 Prophet (Imate Jamin):
IPL 2.20
SPL 2.20.0000
Protocol 4.1.13.24
OS 10.0.0.0
EXTRom Prophet Touch X
Alan
Click to expand...
Click to collapse
u listed everything but the radio rom. Try different radio version.
2.20.x prob good for balance.
2.69.x is hte newest radio rom, a bit harsh on the battery consumption
2.19.x is old, might not work on all the gprs stuff.
JUST me experince, YMMV.
I have a imate just like yours, same IPL/SPL.
never had that problems and always flashed my imate with G4 step 1 roms.
regards
RP
tb146 said:
Which rom do you use for step 1 ? try to flash with another NVID Flash step 1 or PV_temp then flash to WM6. otherwise you can try to change the radio rom to 2.19
If the problem still exist, i think your phone is having problem with the Radio hardware.
Click to expand...
Click to collapse
Sorry, had a lapse there..
My RadioROM is 2.47.21. I had tried multiple RadioROMs before in earlier WM6 versions, with no change. On the other hand, some other threads that seem related have had success with 2.19.21, so I'll give it a try. I don't use GPRS for anything anyway.
One question on that - I know you don't lose any data flashing a RadioROM, but one thread mentioned having to hard reset after the flash to get the new RadioROM functionality. Is this true? (Hoping not)
Alan
adsbar said:
Sorry, had a lapse there..
My RadioROM is 2.47.21. I had tried multiple RadioROMs before in earlier WM6 versions, with no change. On the other hand, some other threads that seem related have had success with 2.19.21, so I'll give it a try. I don't use GPRS for anything anyway.
One question on that - I know you don't lose any data flashing a RadioROM, but one thread mentioned having to hard reset after the flash to get the new RadioROM functionality. Is this true? (Hoping not)
Alan
Click to expand...
Click to collapse
Radio rom is seperate. Like bios, you dont format HDD after upgrade bios. It's safe to upgrade without hard reset. However it doesnt hurt to install latest ROM also (which requires hard reset) Also what kinda 3rd party software you installed on there? commonly when prophet is in data mode, sometime voice doesnt come in, might be something doing that without you knowing.
Yes, that is true.
Radio ROM is not involve with OS ROM, you can flash your radio ROM to any version without effecting to the OS ROM and no need to hard reset.
Hard reset is only for upgrade and downgrade the OS ROM.
I have flashed to any radio ROM without Hard Reset.
Each Radio ROM has different configuration, so it can effected your battery drain because the receiving signal can be different at any radio rom.
we assume the latest radio rom is better than the earlier version but the best things, you can try all the available Radio ROM which is fit to your need.
Cheers,
I have the same problem
I have the same problem - my Imate Jamin (Prophet G3) started to miss calls from time to time after I upgraded to WM6. Tried multiple RadioROMs and multiple ROMs - no effect whatsoever
I have the same problem, but i don't know the solution.
2.19.21 is the solution for me.
rublin said:
I have the same problem - my Imate Jamin (Prophet G3) started to miss calls from time to time after I upgraded to WM6. Tried multiple RadioROMs and multiple ROMs - no effect whatsoever
Click to expand...
Click to collapse
Sorry for so long to reply, but I wanted to make sure...
Since downgrading my RadioROM to 2.19.21, I have not had the missed call problem. The last time around on WM6 I tried everything from 2.20.21 on up to the latest without any improvement.
If you haven't tried 2.19.21, try it.
As a side note, I feel the Prophet Touch X ROM works great now, and I'm experiencing no bugs. However, the battery drain is more than the WM5 WWE.
YMMV
Alan
Hallo everyone, does someone has an solution for my problem.
Everytime I make and then end a phone call the s200 freezes and I have to soft-reset it.
It looks like a problem in the phone software.
When I get an incoming call and then end it then I have to wait for a minute and then finally the phone program closes.
When I try to close it myself it freezes just like when I made the call.
I haven't found anything in the forum section.
Device info:
ROM 2.26.10.2
radio version 02.19.21
protocol version 4.1.13.09
ExtRom version: 2.15.13.121
Hope to get get some help, greetings Froggie
I get the same problem. No solution.
I installed MS Console recently, and also made some tweaks to the phone settings via 'advanced configuration' tool. could that be it?