I was being a little impatient [email protected]#@ and tapped on HimaClearJumpCode.exe after I copied it to my XDA II SD card..
I am getting the wonderful Serial error..
BEFORE you try to help.. I have no sync port.. (It broke) I can only sync with bluetooth.
I am going to buy a SD card reader now and I hope and pray there is some way I can make it auto boot from the SD card...
Does any one know if that is possible? Does anyone want my life time allegiance and thankfulness? :lol: If so, please send me the files to copy to my SD card or step by step instructions. Thank you!
(I started all this because I needed to upgrade to the new 1.7 from the Hongkong 1.60..)
Re: YA, YA, YA.. I [email protected]#@#ED UP!!!
dewild1 said:
I am going to buy a SD card reader now and I hope and pray there is some way I can make it auto boot from the SD card...
Does any one know if that is possible?
Click to expand...
Click to collapse
Using SD card to flash is possible and to me the most highly recommended method.
You will do that through the Boot Loader menu.
I recommend you use a spare SD to backup your ROM (through Boot Loader) before you process.
Boot loader as accessible by pressing power button and soft-resetting your XDA.
There are surly more than 500 posts on this subject. I'll let you use the search facility to find-out which one is most applicable to you based on the boot loader version you have.
Re: YA, YA, YA.. I [email protected]#@#ED UP!!!
dewild1 said:
I was being a little impatient [email protected]#@ and tapped on HimaClearJumpCode.exe after I copied it to my XDA II SD card..
I am getting the wonderful Serial error..
BEFORE you try to help.. I have no sync port.. (It broke) I can only sync with bluetooth.
I am going to buy a SD card reader now and I hope and pray there is some way I can make it auto boot from the SD card...
Does any one know if that is possible? Does anyone want my life time allegiance and thankfulness? :lol: If so, please send me the files to copy to my SD card or step by step instructions. Thank you!
(I started all this because I needed to upgrade to the new 1.7 from the Hongkong 1.60..)
Click to expand...
Click to collapse
Yes there's a way to fix that over the SD, but I prefer rather than buying a SD CARD reader get a serial sync cable or get a cradle!!!
My Sync port on the XDA is broken off.
My power button is broken TOO and I think I can short out two of the 4 nubs that the power switch used to be connected to.. If I short out the two on the left, the blue light comes on. Is that what happens when you press and hold your power button?
Do you realize that I ran that HimaClearJumpCode program and I think that erases the first part of the ROM? Is that area of memory where the boot menu is too?
If so, my XDA II is a paperweight! :shock:
Anybody got one with a broken screen or other damage but with a good main board and ROM and sync port?
Please
:roll: So am I just screwed or ???
My simplified questions..
If the code erased the first part of the ROM, is there even going to be a bootloader choice? Did it erase that part of the ROM that gives me a choice to boot from an SD card?
If not,
Because my on-off switch is broken and there is only the "nubs" left on the main board, is there someway someone can tell me if their blue light comes on when the power button is pressed? If so, I am shorting the right nubs and I will simply solder a removable jumper so I can boot it up..
I just became a trader and bought the MPX300 but I still want to fix my XDAII.
Thank you very much for your help.
Related
Ok, got tired of waiting for the VZ upgrade and decided to go the DCD route.
I am using scrawnyb's upgrade guide and got the Hard SPL 2.40 Bootloader on my Verizon 6800 with no problem (I did get stuck on the bootloader screen but fixed that with the exit bootloader program). Now the questions that will hopefully allow me to finish:
1. According to Scrawnyb, you load the radio first. I downloaded 3.42.30 and extracted it and it extracts as a .nbh file extension, not an executable. So, how do you execute it? I tried clicking on it, changing the extension to a .exe, but it still won't load on the phone while in bootloader.
2. Do I need to load the DCD 3.2.5 first and then the radio?
Thanks in advance for the help.
Les
XV6800 Stock (trying to go to DCD 3.2.5 and Radio 3.42.30)
Upgrade
The easiest thing to do is rename the .nbh TITAIMG.nbh and put it on the root of a sd micro card and enter the bootloader by doing a hard reset and allowing the update to run, then get the dcd kitchen or rom and follow the instructions on the download thread. There is a great wiki at the beginning of this site.
Good Luck and Enjoy like the rest of us!
Don't forget to thank all of the great people bringing us these great ROM's
There is also an executable version of the radio somewhere. That is what I used to flash to the latest radio version. I dont remember where I got it - it was either from this site or another site.
I then wanted to go to an earlier radio version and had to use the SD method. Overall, the SD method is pretty easy, once you get the card formatted correctly, which can be tricky.
Thanks for the tips. Now, I seem to have a new problem. Again, the only change I have made to the phone is install Hard SPL 2.40. I still have the stock rom, etc. Now though, when I hit the power button to turn off the display and go into sleep mode, it completely cuts the power and I have to do a soft reset. Anyone know whats up with that?
Jeez, maybe waiting for the damn VZ update wouldn't be so bad after all :-(
Thanks,
Les
Well, just learned something that might be of value to others. As above, sleep mode was not working when pushing the power button if the phone was on - I was having to do a soft reset to turn the phone back on. Again, keep in mind that I had not flashed a new radio or rom yet, only loaded Hard SPL 2.40. Figuring I had a bad button and anticipating taking it back to VZ, I downgraded the Bootloader and relocked the phone using Titan Relocker as per the Wiki. Now the bootloader is V-1.06 and guess what? After a hard reset and reprograming, etc. - the power button is acting as it should.
Well, thats enough for tonight, might try again tomorrow but going to have to find the radio in a .exe format first. Otherwise, I guess I will have to try the SD card route.
Thanks,
Les
I had the exact same problem, flashed the bootloader and then had to go to an auction, phone worked great until it either fell asleep or I put it to sleep, then it wouldn't come back until I reset.
This apparently is just a common issue for those who have started the upgrade but didn't complete it.
I also had the issue with formatting the memory card, my laptop has a SD card slot on it, but it uses some weird software driver that makes the drive letter disappear when the card isn't inserted, and this prevented it from formatting it correctly. I then tried a USB adapter that turns any SD card into a pen drive, it also wouldn't work, so I broke down and bought a cheap mem card reader from walmart for $20 and it works perfect. And has a SIM card reader on it to boot, tho I don't own a phone with a SIM card, but if I ever do, I'm all set
BTC
BillThyCat said:
...
I also had the issue with formatting the memory card, my laptop has a SD card slot on it, but it uses some weird software driver that makes the drive letter disappear when the card isn't inserted, and this prevented it from formatting it correctly. I then tried a USB adapter that turns any SD card into a pen drive, it also wouldn't work, so I broke down and bought a cheap mem card reader from walmart for $20 and it works perfect. And has a SIM card reader on it to boot, tho I don't own a phone with a SIM card, but if I ever do, I'm all set
BTC
Click to expand...
Click to collapse
Had the same problem with my dell laptop built-in SD reader (I have a thread about this). Had to whip out my sandisk card reader which ended up working flawlessly.
Seems like the built-in ones just dont do it properly.
Hello,
My Mozart has been slaggish for a month or so now and I used to get freezes for like a minute. Then applications would refuse to start unless I tried like 3-4 times. As I was walking today I got the phone out of my pocket to check the time only to notice a message prompting me that I must reset to factory defaults as all my files are corupted. Done that and then the phone entered an endless reboot loop. Doing another hard-reset allows me to start configuring the phone again but it's a matter of time before it restarts on its own and prompts for a hard-reset. This is an Orange UK phone and I havent seen any ROMS to flash and see if that resolves the issue. I was about to dish out £500 for the Samsung Omnia 7 but it turns out the device has similar issues and so is the HD7. Anyone knows if this is easy to fix? I feel terrible for giving my HD2 away so I guess I am going for an iPhone 4 instead.
Sounds like an issue with SD Card, could be corrupted. Your best option would be to send it back for repair as faulty or if you are adventurous (and don't need your warranty) you can attempt to replace the SD Card yourself.
I have accessed the SD on my Mozart and it isn't that difficult, it just requires the correct tools and patience.
meegulthwarp said:
Sounds like an issue with SD Card, could be corrupted. Your best option would be to send it back for repair as faulty or if you are adventurous (and don't need your warranty) you can attempt to replace the SD Card yourself.
I have accessed the SD on my Mozart and it isn't that difficult, it just requires the correct tools and patience.
Click to expand...
Click to collapse
Thanks
I replaced the card and the phone works. Seems to be a bit slowish though. Must be the write speed of the card
Awesome, I'm glad that worked.
Just out of curiosity, what card did you replace it with?
how to access sd card
meegulthwarp said:
Awesome, I'm glad that worked.
Just out of curiosity, what card did you replace it with?
Click to expand...
Click to collapse
Guys anyone if you could provide me a link where I can learn how to replace or access the sd card , will be appreciated .
Hi everyone!
I have (what I think is) a huge problem on my phone and after looking in tons of forums for solutions I found that the people here seem to really be able to help me.
I'm new to android phones... So please bare with me...
So I bought this phone in second hand from a friend who was in need of some cash for college (I don't really like to buy used stuff but...), and it came rooted with cyanogenMod7 but I was having trouble cause the phone wouldn't recognize my sd card and I couldn't connect it to my pc so I tryed to change it back to its original settings...
Its a vodafone 845 (huawei U8120)..
A friend of mine tried to help and we found this recovery menu (Clockwork recovery v3) and he chose some format options (format boot, system and data) and now the phone is useless! It still doesn't recognize my SD card or my pc, I can get into this recovery menu again but cant seem to fix the problem!
Other than that all the phone does is show the initial hourglass forever...
I would be so gratefull if someone could help! Thank you in advance!
RubenLockheart said:
Hi everyone!
I have (what I think is) a huge problem on my phone and after looking in tons of forums for solutions I found that the people here seem to really be able to help me.
I'm new to android phones... So please bare with me...
So I bought this phone in second hand from a friend who was in need of some cash for college (I don't really like to buy used stuff but...), and it came rooted with cyanogenMod7 but I was having trouble cause the phone wouldn't recognize my sd card and I couldn't connect it to my pc so I tryed to change it back to its original settings...
Its a vodafone 845 (huawei U8120)..
A friend of mine tried to help and we found this recovery menu (Clockwork recovery v3) and he chose some format options (format boot, system and data) and now the phone is useless! It still doesn't recognize my SD card or my pc, I can get into this recovery menu again but cant seem to fix the problem!
Other than that all the phone does is show the initial hourglass forever...
I would be so gratefull if someone could help! Thank you in advance!
Click to expand...
Click to collapse
Well you wiped the phone, so there's nothing to boot into.
You need to put a rom on the root of the SD card (not in any folders). Make sure the rom is made for your device. Boot into recovery and flash the rom, you should have a working phone after that.
Thank you for you help!
Now the only problem that stands is that the phone doesn't mount my sd card... Its an 8gb kingston, maybe I should get one with less capacity? The previous owner used a 4gb card and she said she never had any trouble regarding that...
Although the phone specifications on the net say it can handle cards up to 16gb :S
Have you tried mounting the SD card in clockwork mod as the usb disk drive?
Its found under mounts/storage.
sent from my legend, currently using extream legend fuse™
Ok guys, I've gotten as far as flashing the rom!!
Made huge progress in exchange for several hours of sleep xD
Now the only problem that stands is that when I choose the option "flash zip from sd card" I get this:
"E: No signature (242 files)
E: verification failed
Installation aborted"
And I'm lost again, yet soooo close to fixing my phone! :/
RubenLockheart said:
Ok guys, I've gotten as far as flashing the rom!!
Made huge progress in exchange for several hours of sleep xD
Now the only problem that stands is that when I choose the option "flash zip from sd card" I get this:
"E: No signature (242 files)
E: verification failed
Installation aborted"
And I'm lost again, yet soooo close to fixing my phone! :/
Click to expand...
Click to collapse
There should be an option somewhere to turn off signature verification. If you can find that option, toggle it off and try again.
You should try installing the original Firmware.Or Reinstall CM7
I got very similar problem. Have u tried to install different sd card. Maybe current one is broken like in my case?
Note: I do not have this device
See [GUIDE]All Huawei new&old phones-Install Stock Rom-Full Reset
Procedure:
1) Download stock ROM from HERE (im guessing you want Vodaphone UK)
2) Format your SD card to FAT32 (plug it into computer, right click on device, format, follow instructions)
3) Create the folder "dload" (without the quotes of course) on to the root (top level) of your SD card.
3) Extract the UPDATE.APP from the stock ROM and place it in "dload"
4) Power off your phone and put sd card in.
5) Power on by pressing POWER+RED_BUTTON+VOLUME_UP
If done correctly you will see a progress bar saying "UPDATING!"
Edit: this will reset the device to normal, however it will of course require a working SD Card. Try using a friends, try using your card in other devices (other phones, computers, etc).
To test SD Cards in your phone:
1) Insert Card
2) Boot into recovery
3) Go to Mounts & Storage menu
4) Plug device into computer
5) Choose "Mount sdcard over USB" (or similar)
6) If it shows up on the computer it is working, and you may as well use it to carry out the steps above
Note, if you are still checking for sdcard after resetting the phone, you will need to devise another method as the recovery will be replaced. For example use the storage menu in system settings, as this will show stats on the sdcard if it is readable.
My phone is working!
The problem with the SD card was that it was password protected, so I used another phone to disable the password, about the ROM, i just picked another one, I actually found it here on XDA! The celestial teapot, I really like it
Now all I want to know is if its possible to have multitouch on my phone?
And by the way, THANK YOU ALL for your help guys! You're awsome!
RubenLockheart said:
My phone is working!
The problem with the SD card was that it was password protected, so I used another phone to disable the password, about the ROM, i just picked another one, I actually found it here on XDA! The celestial teapot, I really like it
Now all I want to know is if its possible to have multitouch on my phone?
And by the way, THANK YOU ALL for your help guys! You're awsome!
Click to expand...
Click to collapse
No problem, glad to help. Glad you got everything up and running too Multitouch is included in the kernel (at least on my device). If you can find a custom kernel for your phone, make sure it's compatible with your rom. I'm not familiar with your phone, so you'll need to do some checking on kernels. I'm not sure if multitouch is also a hardware limitation or not, so if you don't have multitouch at all it may not be possible. Kernels determine the number of touch points on my phone, if you don't have it at all then it may not be possible or there may be another mod for it.
If you can flash a custom kernel to achieve this, remember to do a nandroid backup first. Always do a backup when flashing anything. If they start to take up too much space, delete the old ones and just keep the most recent. Also remember to only wipe dalvik and cache when flashing a kernel.
Again, since I'm not familiar with your phone you'll need to do some research on these things first. The best thing you can do is read, read, and read some more. If you get stuck again, the good people here will always be able to help you out.
Stock 1.42 internal and cm7 on sd card. In order to boot to the sd card, I must have the power cord connected . Is there a way around this ? This is a 16 gb tablet. Thanks
sailerph said:
Stock 1.42 internal and cm7 on sd card. In order to boot to the sd card, I must have the power cord connected . Is there a way around this ? This is a 16 gb tablet. Thanks
Click to expand...
Click to collapse
At this time, the community has not figured out a way around this. Fortunately, I am one of the lucky ones that always boots from SD just fine.
Currently, there is an experiment being done to try understand this problem better. However, there seems to be a lack of participation in the project. If you would like to contribute, go here: http://forum.xda-developers.com/showthread.php?t=1608683
Are you rooted?
Yes rooted 1.40
Prepare an sdcard that you can boot into cwm.
Make sure adb shell can run onto Nook Tablet.
After you do that post here.
as a quick way, you can pull the battery connector from the back of the unit. I demonstrated this on XDATV Nook Tablet unboxing.
AdamOutler said:
as a quick way, you can pull the battery connector from the back of the unit. I demonstrated this on XDATV Nook Tablet unboxing.
Click to expand...
Click to collapse
those heads on those ( two ? ) screws... were they an odd brand or type ( anti-pamper ) ? ? ?
old_fart said:
those heads on those ( two ? ) screws... were they an odd brand or type ( anti-pamper ) ? ? ?
Click to expand...
Click to collapse
Torx T5.
sailerph said:
Stock 1.42 internal and cm7 on sd card. In order to boot to the sd card, I must have the power cord connected . Is there a way around this ? This is a 16 gb tablet. Thanks
Click to expand...
Click to collapse
battery powered, usb output, cell charger. it just needs 5 seconds or less to do the job. good luck!
sailerph said:
Stock 1.42 internal and cm7 on sd card. In order to boot to the sd card, I must have the power cord connected . Is there a way around this ? This is a 16 gb tablet. Thanks
Click to expand...
Click to collapse
You might want to try this procedure: http://forum.xda-developers.com/showpost.php?p=24885731&postcount=679
It works for me much of the time.
Lets try to fix that:
Boot cwm
1st do this:
dd if=/dev/block/mmcblk0p2 of=/sdcard/mmcblk0p2
So you backup your p2 partition.
Now flash mine, after you copy onto sdcard
dd if=/sdcard/mmcblk0p1.img of=/dev/block/mmcblk0p1
dd if=/sdcard/mmcblk0p2.img of=/dev/block/mmcblk0p2
Reason i tell you to backup yours is because mine has cyanoboot.
When you want to go back to yours reverse the flashing.
Here is the download link:
http://www.sendspace.com/file/y8uobr
Please report if boot2sd is fixed after this.
Thanks
STRICTLY FOR 16GB NOOK TABLETS
demetris_I said:
Lets try to fix that:
Boot cwm
1st do this:
dd if=/dev/block/mmcblk0p2 of=/sdcard/mmcblk0p2
So you backup your p2 partition.
Now flash mine, after you copy onto sdcard
dd if=/sdcard/mmcblk0p1.img of=/dev/block/mmcblk0p1
dd if=/sdcard/mmcblk0p2.img of=/dev/block/mmcblk0p2
Reason i tell you to backup yours is because mine has cyanoboot.
When you want to go back to yours reverse the flashing.
Here is the download link:
http://www.sendspace.com/file/y8uobr
Please report if boot2sd is fixed after this.
Thanks
STRICTLY FOR 16GB NOOK TABLETS
Click to expand...
Click to collapse
The above download link is dead; is there a new replacement link?
Thanks.
Boot to sd without usb - possible solution
Post Removed
spangeman said:
This seems to work for me when I am stuck without a USB power cable and need to boot into CM.
1. Boot into stock Nook.
2. Click the SD card icon in the bottom left hand corner and select browse SD card.
3. Hold down power button and power off. Wait for the Nook to shutdown.
4. Hold down power button to power back on, try to hold down the power button for as short a time as possible when you do this.
5. Do not try any other button pressing during boot.
I am using a n2acards.com 16GB card downloaded from their site on a 8GB Nook tablet.
Click to expand...
Click to collapse
I think it's ridiculous that anyone would pay $20 for something that you can do for free with just reading into it a little. You could learn something in the process. Oh but that requires some work, and that's too hard...
If you want to donate your money, give it to the actual developers that are spending countless hours figuring all this out for us to use.
Sent from my NT running CM10
BoostedB18C said:
I think it's ridiculous that anyone would pay $20 for something that you can do for free with just reading into it a little. You could learn something in the process. Oh but that requires some work, and that's too hard...
If you want to donate your money, give it to the actual developers that are spending countless hours figuring all this out for us to use.
Sent from my NT running CM10
Click to expand...
Click to collapse
I apologise, I didn't realise this was a contentious issue, I have removed the post.
hi new to the forums so please be nice. i have a nook tablet 1.4.0 which was rooted before with the first cm7 release im guessing. well yeah i recently gone back to college and wanted to update my nook so i wanted to delete everything to restore it to stock, idk what program i used or what i did but it didnt work. i think by that time i was stuck on a boot loop where the n logo just goes on and off after that i saw a thread about a total wipe by using ubuntu i tried that and it worked perfectly i was back in stock. my stupidy lead me to want cm7 back since the apps in nook tablet stock wont let me read the books i have online. as soon as i tried to get cm7 i was stuck in a boot loop again i wanted to see if the ubuntu thing was gonna be the solution for my stupidity but this time it didnt work. it was stuck in "writing all zeros". i tried another boot loop solution by ray waldo it didnt work. i can still run cwm but it has some errors in the background saying "can't mount recovery/command/log/log/last_log/last_log. i want my tablet back just to get it to stock is the best solution i would want and i would just keep it that way. ty for your time.
norkiz23 said:
hi new to the forums so please be nice. i have a nook tablet 1.4.0 which was rooted before with the first cm7 release im guessing. well yeah i recently gone back to college and wanted to update my nook so i wanted to delete everything to restore it to stock, idk what program i used or what i did but it didnt work. i think by that time i was stuck on a boot loop where the n logo just goes on and off after that i saw a thread about a total wipe by using ubuntu i tried that and it worked perfectly i was back in stock. my stupidy lead me to want cm7 back since the apps in nook tablet stock wont let me read the books i have online. as soon as i tried to get cm7 i was stuck in a boot loop again i wanted to see if the ubuntu thing was gonna be the solution for my stupidity but this time it didnt work. it was stuck in "writing all zeros". i tried another boot loop solution by ray waldo it didnt work. i can still run cwm but it has some errors in the background saying "can't mount recovery/command/log/log/last_log/last_log. i want my tablet back just to get it to stock is the best solution i would want and i would just keep it that way. ty for your time.
Click to expand...
Click to collapse
First thing I'd try would be to make a bootable CM7 SD ROM. If you can boot into that SD ROM, you'll at least have an operating system for the time being, and you can still try to figure out/fix the problem that was created in the internal system.
Sent from my Slider SL101
Solar.Plexus said:
First thing I'd try would be to make a bootable CM7 SD ROM. If you can boot into that SD ROM, you'll at least have an operating system for the time being, and you can still try to figure out/fix the problem that was created in the internal system.
Sent from my Slider SL101
Click to expand...
Click to collapse
i have a cm7 booted in a sd card (32 gb) im guessing you cant take the sd card off and you cant use the sd card for storage purposes because it has cm7 files in it. or is there a way to get it back that idk about? ty for your reply btw.
norkiz23 said:
i have a cm7 booted in a sd card (32 gb) im guessing you cant take the sd card off and you cant use the sd card for storage purposes because it has cm7 files in it. or is there a way to get it back that idk about? ty for your reply btw.
Click to expand...
Click to collapse
You can still put files on your SD card. The let me try to explain:
The CM7 image that you wrote to your SD card created 4 partitions. By using a free software called MiniTool Partition Wizard on a PC, you can extend the 4th partition (the one for user data) of your SD card to consume the rest of your storage space. The software is really easy to use, you shouldn't have any trouble with it.
Again, I know this all isn't fixing your main issue yet, but at least you'll have a tablet again until it hopefully gets fixed up.
Solar.Plexus said:
You can still put files on your SD card. The let me try to explain:
The CM7 image that you wrote to your SD card created 4 partitions. By using a free software called MiniTool Partition Wizard on a PC, you can extend the 4th partition (the one for user data) of your SD card to consume the rest of your storage space. The software is really easy to use, you shouldn't have any trouble with it.
Again, I know this all isn't fixing your main issue yet, but at least you'll have a tablet again until it hopefully gets fixed up.
Click to expand...
Click to collapse
tysm for helping me solar. imma do it fresh from the start right now i have a clean 32 gb micro sd card. i downloaded the cm7 for the sd. i have minitool partition wizard installed. whats my next move. im sorry for the trouble im giving you.
No trouble for me, my friend. We're all here to help.
Okay, so I assume you're running Windows here:
1.) Write the CM7 SD .img to your microSD card using the Win32DiskImager tool found in the opening post of the CM7 ROM thread.
2.) After that's finished, open up the Partition Wizard software and find your SD card disk (make sure it's the right one!)
3.) Choose the option to resize the 4th partition of your SD card. Resize it so that all off the unallocated space becomes part of that last partition.
4.) After you're satisfied with that, click the option to apply those changes and wait for it to perform those actions.
5.) You should now be good to put the SD card into your NT and boot up into your new CM7 ROM!
Solar.Plexus said:
No trouble for me, my friend. We're all here to help.
Okay, so I assume you're running Windows here:
1.) Write the CM7 SD .img to your microSD card using the Win32DiskImager tool found in the opening post of the CM7 ROM thread.
2.) After that's finished, open up the Partition Wizard software and find your SD card disk (make sure it's the right one!)
3.) Choose the option to resize the 4th partition of your SD card. Resize it so that all off the unallocated space becomes part of that last partition.
4.) After you're satisfied with that, click the option to apply those changes and wait for it to perform those actions.
5.) You should now be good to put the SD card into your NT and boot up into your new CM7 ROM!
Click to expand...
Click to collapse
im at step 3 im kind of confused on what to do at that part. this is what im looking at right now. tysm
norkiz23 said:
im at step 3 im kind of confused on what to do at that part. this is what im looking at right now. tysm
Click to expand...
Click to collapse
Okay, you're good there. Go to Disk 2, and the 4th partition down. Click on it then click the Move/Resize button on the toolbar of the program. Then just drag the bar all the way across and you will see that you're changing the storage of the 4th partition.
Report back if you get stuck.
Solar.Plexus said:
Okay, you're good there. Go to Disk 2, and the 4th partition down. Click on it then click the Move/Resize button on the toolbar of the program. Then just drag the bar all the way across and you will see that you're changing the storage of the 4th partition.
Report back if you get stuck.
Click to expand...
Click to collapse
ok sorry is the 4th partition the 26.09 gb unallocated?
No, that 26.09GB is unused right now (unallocated space).
The fourth partition is simply the fourth one down, it has a capacity of 1.30GB. You want to resize that one.
Solar.Plexus said:
No, that 26.09GB is unused right now (unallocated space).
The fourth partition is simply the fourth one down, it has a capacity of 1.30GB. You want to resize that one.
Click to expand...
Click to collapse
god dude your the best. thanks a bunch even though its a temporary fix its still a big help!
No problem. At least now you still have a tablet to work with!
nook wont turn on
my nook tablet wont turn on i downloaded that 1.4.0 and my nook went dead did the power button for 20 sec and kept it charge over nite and still nothing did all the button and held them still nothing wont turn on
jesse1627 said:
my nook tablet wont turn on i downloaded that 1.4.0 and my nook went dead did the power button for 20 sec and kept it charge over nite and still nothing did all the button and held them still nothing wont turn on
Click to expand...
Click to collapse
Are you using the official Barnes and Noble USB cable and wall charger?
Sent from my Slider SL101