Can I use my Nokia CK-1W carkit with my MDA3. Does anyone have that info.
I use my 9090 with a sony ericsson HCH300 car kit,
Works great!
The ericsson car kits work better than the nokia with the pda's, they pair up ok but incomming caller complains or echo.
i use parrot ck3100, but don't I get that when I enter to the car, it is connected alone to the pda??
regards
hugot said:
I use my 9090 with a sony ericsson HCH300 car kit,
Works great!
Click to expand...
Click to collapse
Hello Hugot
tell me something, with HCH300 you can answer the calls trough the carkit or you have to press the green button on the pda?
Any complaints on the other end? do your friends complaint about that echo problem or something like that ?
Portuguese do it better
can't find it !!!!
I've been searching for the SonyEricsson site for tha HCH 300 car kit and can't seem to find it anywhere...
i've found HCB-300 and HCB-30....any of these ???
I ment HCB-300 and NOT HCH-300 (Sorry).
Hello Hugot
tell me something, with HCH300 you can answer the calls trough the carkit or you have to press the green button on the pda?
Any complaints on the other end? do your friends complaint about that echo problem or something like that ?
Click to expand...
Click to collapse
I can answer the calls where i want, either on the pda or on the car kit button, i can even redial without touching the pda.
No complaints on the other end, no echo, my friends complaint about echo sometimes but it's when i'm talking to the pda, without car kit.
another question...
hugot said:
I use my 9090 with a sony ericsson HCH300 car kit,
Works great!
Click to expand...
Click to collapse
hello again Hugot,
tell me, can you get other sounds through HCB 300? like navigation instructions for example ? or mp3 sounds ?
hugot said:
I ment HCB-300 and NOT HCH-300 (Sorry).
Hello Hugot
tell me something, with HCH300 you can answer the calls trough the carkit or you have to press the green button on the pda?
Any complaints on the other end? do your friends complaint about that echo problem or something like that ?
Click to expand...
Click to collapse
I can answer the calls where i want, either on the pda or on the car kit button, i can even redial without touching the pda.
No complaints on the other end, no echo, my friends complaint about echo sometimes but it's when i'm talking to the pda, without car kit.
Click to expand...
Click to collapse
Hugot, i currently have installed the Nokia CK-1W carkit. The other party is complaining about echo. With the SE HCB-300 this is not happening? Please be honest, cause i am about the remove my NOKIA and install the SE one.
I use my Qtek 9090 with a Nokia C7-7W carkit. I hear my callers and whom I call to very well, but they hear an echo. Can anyone tell me how to prevent?
I use a parrot ck3100, the only problem that I have is that I don't get that they are connected alone when I enter to the car and I light the contact.
regards
try upgrading the parrots firmware from driveblue.com and making sure bluetooth is switched on before the parrot
i have the last versión, the one problem is that the parrot don´t connect to pda only when i enter in the car ....
Sorry about my late answer if it stills help here it goes.
I can't use anything else then phone calls with my HCB-300. No Mp3, directions, etc, even the ring tone is from the car kiy and not the one on the phone.
No one has claim about echo or anything else, i think that the other callers can't even notice that i'm using a Car KIT.
It's GREAT!
I got a Parrot CK3100 yesterday and I don't get any echoes which is good, the Nokia ones seem to echo a hell of a lot.
Caller ID on the car kit works, and once the contacts have been sent via bluetooth (one by one unfortunately ) the name pops up on the LCD display, its really good, better than I thought it could be when I ordered it.
Haven't tried voice dialling yet, has anyone who has one set the option to use voice dialling from the car kit instead of the phone? does this work?
Related
Hello everyone,
I have tried the two reg patch by Sin () to add the Handsfree profile to my Qtek 2020 (with WM2003SE). I use the very good Bluetooth headset by Globalsat BTH-808, and I have seen these things:
- When in Headset mode: the blu BT Led on the Globalsat flash one time per second. If one call incomes, an icon on the top bar light on in my Qtek and I can use the Globalsat to answer the call, or I can transfer audio back to Qtek and use it to answer the call.
- When in Handsfree mode: the blu BT Led on the Globalsat flash three time per second (awful). An icon noticing the HF Profile is ever on the top bar (with or without a call incoming, and this is not good, i think). If one call incomes, I can use at the same time the Globalsat or the Qtek (audio comes out from the Qtek and from the Globalsat).
Where is the good useful way of this? Why do I need the Handsfree profile too? to make voice dialing (adding relative software)? I didn't liked it and I disabled back the HF profile...
Can someone explain to me how the Hadsfree profile is good?
Thank's
facts
Hands free mode is great when using the right OS.
hands free is more robust. It offers caller ID, etc.
Headset will not do caller ID but I believe it may offer better battery life.
Also with your 2.02-2.06, you will notice while in hands free that the mic on the headset does not work, only the one on the phone.. Even though you can hear sound on the headset!!
If I am wrong, please tell me.
One OS that supports Hands free is the 2.20 translated or in original Chinese. But the caller ID is not consistent on some if not all devices. The caller ID will not be displayed if you have already received the call or if it is in your contacts. It also has some bugs when someone calls on the call waiting and you switch over to it, you will loose the sound on both the headset and the phone until you turn off hands free and then back on.
The other OS, 2005, is GREAT with the Hands free and the phone program, no bugs AT ALL with bluetooth and the phone, BUT, the contacts, email and calendar database are different so it will not work with many programs and the memory size is messed up and small.
I am switching back to my 2.20 translated today.
I wish someone wuld fix it.
Re: facts
ccrrazzzy said:
Hands free mode is great when using the right OS.
hands free is more robust. It offers caller ID, etc.
Click to expand...
Click to collapse
Hmmm, no... with my device (Qtek 2020, aka XDA II/MDA II and WM2003 SE 2.06) the CallerID works great with either Headset profile and Handfree Profile...
ccrrazzzy said:
Headset will not do caller ID but I believe it may offer better battery life.
Click to expand...
Click to collapse
Yes this is real: Headset is more light for battery life cause it lets BT headset to go online only during call incoming...
ccrrazzzy said:
Also with your 2.02-2.06, you will notice while in hands free that the mic on the headset does not work, only the one on the phone.. Even though you can hear sound on the headset!!
If I am wrong, please tell me.
Click to expand...
Click to collapse
According to me you are wrong, cause my device have the headset mic working in either Headset and Handfree profile. The only practic difference between the two profiles are that HS goes idle and come online only during call incoming, instead HF is online not stop.
ccrrazzzy said:
One OS that supports Hands free is the 2.20 translated or in original Chinese. But the caller ID is not consistent on some if not all devices. The caller ID will not be displayed if you have already received the call or if it is in your contacts. It also has some bugs when someone calls on the call waiting and you switch over to it, you will loose the sound on both the headset and the phone until you turn off hands free and then back on.
Click to expand...
Click to collapse
Again... with my device all works fine, but I don't like the headset all time in waiting/online modem with its led blinking speedly and the boring icon on the top bar (so if you miss a call or receive a sms, you see the baloon tooltip to advice you that more than 1 alert are waiting). I don't know about your bugs cause I never tested these cases
ccrrazzzy said:
The other OS, 2005, is GREAT with the Hands free and the phone program, no bugs AT ALL with bluetooth and the phone, BUT, the contacts, email and calendar database are different so it will not work with many programs and the memory size is messed up and small.
Click to expand...
Click to collapse
I am yet not happy about the WM2003SE 2.06WWE speed on booting and its stability... so I will not go further on with Magneto/WM2005... When I will be able to do, I will buy a new device with Magneto natively working...
ccrrazzzy said:
I am switching back to my 2.20 translated today.
I wish someone wuld fix it.
Click to expand...
Click to collapse
Good flashing and have a nice weekend!
The difference between the two right now using WM2k3SE is:
Handsfree allows you to redial the last number using your BT headset (hold headset button for 2-3 secs).
Headset allows to use the BT headset to talk on the phone.
Other than that they don't do anything else with the current OS (at least for me)
tesking
I am using a Jabra BT800 and I have talked to people who are using Erickson HBH200 and HBH660 and one guy who is using an xLive. The people I have talked to using 2.02 or 2.06 or Sin's 2.02-2.06 merge, all said these devices are not having the caller ID working and the Hands Free would give them the stereo affect.
You are the first.
I have tried 2.02, 2.06 and the Sin's combined one. All would not display properly with the caller ID on my BT800. And even with the addition of the reg key, hkey local machine, software, Microsoft, Bluetooth, "HandsfreeProfileOn", I would get the caller ID, only if the number was not in my contacts and it was not already in my call history of the BT device.
I have also tried BT tools, I have tried every patch and tried all the widcomm stuff too.
I am very curious to know what you have for a ROM and any BT additions or patches and I am very interested to know what caller ID BT device you have.
Maybe you misunderstood what I was saying as well, please know that I was talking about caller ID being displayed upon the BT device, not the phone.
One other thing that Hands free does is allows for the possibility of BT activated voice dial. Like the the voicesignal program on my MPX300.
There has to be a hardware specific driver for each device so when you press the button, it transfers the audio and Mic to the BT headset and starts the voice recognition program. Other wise, we would have had BT voice dial on our HTC devices by now. http://forum.xda-developers.com/viewtopic.php?t=15191&start=50
ccrrazzzy
I misunderstood the BT device you're using for caller ID (I don't have such device, I was talking about the phone itself).
As far as redialing using the Headset, I am using the Motorola HS850 and I was able to use it to redial the last number. However I end up turning the Handfree off when I don't need it in order to avoid the Mic issue on the headset. When I paired the headset, I chose headset profile only. When ever I need the handfree capability, I normall go under Start/Settings/Connections/Bluetooth/Devices hold my stylus on the device (HS850) then choose "Set as Hands-free" on the pop menu.
For Crrrrraaaazzzyyy:
For Crrrrraaaazzzyyy:
Sorry for your device... I can tell you that with the Globalsat BTH-808 (see the ebay link below), it works smooth in headset Profile (1 or 2 seconds and I can answer from the headset button), and it works smooth in Handfree profile (but as I said, i don't like the behaviour): you can buy the headset from here
http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=6334980179
Have a nice day!
BT
Sorry I was not clearer at first. I was speaking about the caller ID on the BT headset or in a BT car audio system.
Hands free is needed to have features like caller ID on the BT device and voice dial and to be able to scroll through the BT device's caller ID history and make calls from that while leaving your cell phone safely tucked in your briefcase or hip case.
With my MPX300, because it supports BT voice dial through the BT headset, and with my caller ID on my Jabra BT800 BT headset, I can have all the power of my phone on my ear; being able to make calls through the caller ID history and through dialing via voice dial by speaking the phone number OR speaking the contacts name AND be able to see who is calling me, all while my cell phone-PDA is about 30 feet away!
I just wish we had this on the XDAII because I hate my MPX300; small screen and low memory make it useless.
Through the 2.20 OS, I am able to get caller ID functioning somewhat, but I have to disable call waiting. However to get BT voice dial to work, we will need someone to make a driver like the one that is in the MPX300 and use software like FONIX or www.voicesignal.com
Here is how we can make voicedial work on BT.
http://forum.xda-developers.com/viewtopic.php?t=19233&highlight=
XDAII-TSM500 and Jabra BT800 incompatibility ???
I cannot use neither the microphone nor the headphone of the BT800 instead of the XDAII for listennig mp3 files or recording notes.
When I use headset mode, I can speak and hear throuhg BT800 and it is possible to use the buttons to answer and hang during a phone calling, but is not possible to dial, see the caller number and other features.
When I use handsfree mode, I can get most of features but the BT800 microphone does not work and I have to use the one of the PDA.
Any way, only it is possible to use the BT800 in phone mode, not in PDA mode. However it works perfectly whit my IPAQ.
Could anybody give me any idea ?
BT
Please read everything.
Again,
With a caller ID device like the BT800, it needs Hands Free mode to work right. 2.02 and 2.06 do not do Hands Free well.
Only 2.20 and 2005 but 2005 has other bugs. In 2.20 you must disable call waiting or live with clicking upon Tools, Hands-Free Off, then Tools, Hands-Free On to resume the sound on the BT headset when you try to switch back to the first call. You will have to do this even if you ignore a call.
2005 works VERY well with BT and the phone but there are other bugs like lack of memory and database not compatible with third party programs.
I am sorry ccrrazzzy
I did not mention I have two other poblems:
One is that I am a beginner whith these machines, less than two weeks working whith them, and some concepts are confusing to me.
The other is, my short english (obvious ?) make me misunderstand things and to explain them is even worse.
I understood that all problems appear using the phone and not using the PDA for listening mp3 files, for example. When I use the BT800 whith my IPAQ 5500 (headset only) works like a wired headphones and I thought that it should work in the same way whith the XDA, forgeting the phone features.
I will try whith 2.20.
Many thanks for your answer and excuse me.
mp3 will not work unless you get http://www.bluetake.com/products/BT420EX.htm or the HP one.
While using Headset profile, in 2.02, 2.06 and 2.20, The BT800 will work but I experienced an 8 or 9 second delay before call is transfered to the headset when someone call me. Calling out is OK.
Hands free and 2.20 is only good way with BT800.
No audio on BT headset on the XDAII, no matter what OS... Like the mono audio on your other pda, it will not work on xdaii.
I am trying the xLive now, will post results. It has built in MP3 player and is BT cell phone Hands free. Only $90.
These will not make you look like you are from outer space
http://www.itechdynamic.com/html/border22.htm
Support HiFi audio, stereo but I doubt they will work on the XDAII.
You could make them work with the widcomm stack but that stack does not work with Hands Free and I forget if it works with Headset.
If this thing had caller ID and worked for sure with the XDAII, I would get it.
I think I found a fix for the BT Hands Free not working the way it should.. I can even use call waiting now and it does not kill the mic when I switch back to the first call..
I set the phone settings to automatically pick up after one ring.. No, it will not automatically pick up after one ring but, now I am getting the name to display in the caller ID field of my xLive mp3-BT headset. and it is working consistently.. I HAVE NEVER gotten it to work consistently before.. NEVER. i will try it with my Jabra BT800 later too.
I think it makes a "deeper" or better connection by making the phone try and make the BT headset device automatically answer???
I am using 2.20 OS and it is the only one that I have found to work, (not fully but it does work BETTER), please try this with other Hands Free devices like car kits and HBH660 etc.. Also try this with 2.02 and 2.06
ccrrazzzy said:
I think I found a fix for the BT Hands Free not working the way it should.. I can even use call waiting now and it does not kill the mic when I switch back to the first call..
I set the phone settings to automatically pick up after one ring.. No, it will not automatically pick up after one ring but, now I am getting the name to display in the caller ID field of my xLive mp3-BT headset. and it is working consistently.. I HAVE NEVER gotten it to work consistently before.. NEVER. i will try it with my Jabra BT800 later too.
I think it makes a "deeper" or better connection by making the phone try and make the BT headset device automatically answer???
I am using 2.20 OS and it is the only one that I have found to work, (not fully but it does work BETTER), please try this with other Hands Free devices like car kits and HBH660 etc.. Also try this with 2.02 and 2.06
Click to expand...
Click to collapse
umm. a bit confusing. care to rephrase.
In depth
With 2.02 or 2.06 or the Sin's merged OS, ANY BT headset device or car kit device that needs to use the Hands Free profile, the mic does not work on the device and there is sound that comes out of the XDAII speaker and only the mic on the XDAII works.
People can not hear you when the only mic that is working is on your phone..
Now on the 2.20 translated OS, Hands Free profile does work BETTER. It does not work fully! The caller ID is not displayed right all the time and the most frustrating part is, when the phone receives a call on call waiting, you can switch over to the other call BUT when you switch back, it acts like 2.20-2.06 and the mic only works on the phone, not on the BT device and both the speakers are going giving you a "stereo" affect.
Well, why not just use the Headset Profile you ask???
I LOVE the ability to be able to scroll through my recent call list, see who is calling via the small caller ID display on my BT device and make phone calls... ALL without having to open up my PDA case or look around for my briefcase and find my XDAII.
I have all the power of a regular phone on my ear or around my neck.
BT devices that need to use Hands Free profile are ones like the BT800
http://www.expansys.com/product.asp?code=BT800
or The HBH 660
http://www.expansys.com/product.asp?code=114271
or the new one that has not been released with the only difference of it has a battery life display too.
http://www.expansys.com/product.asp?code=118678
xLive
do a search at http://www.expansys.com/ for xlive.
The xLive MP3 player - Hands Free phone device also allows me to punch in the numbers with the little joy stick and make a call. (It has other bugs though. Wait until a newer version than 1.23c comes out. They still have the old version listed. http://www.alfa-tech.com.hk/index_download.html )
Other devices that require Hands Free profile, are devices like Car Kits..
They require Hands Free profile so the caller ID is displayed and and other more robust feature can be activated.
Headset profile does not support caller ID nor other more powerful features.
My fix...
With the Hands Free profile, and setting the phone to auto answer after one ring, the caller ID is displayed with the name if it is in your contacts AND most importantly, the duel speaker and only mic on the XDAII thing does not happen when you receive another call and switch back to the original call. :lol: :wink:
Hello,
I have stumbled upon the BT problem also, and am having problems since then. I installed BT Tools, and removed the handsfree setting, but still a lot of problems.
I was quite happy seeing your post, so i Removed BT Tools, paired my HBH-660, and used your "fix".
Obervations:
When pairing, the ppc asks to set the headset as handsfree devide, and twice to set is as headset. When clicking Yes for the three, my PPC
does the following: When set not to auto-answer, the phone number is displayed on my headset, when answering, the stereo and mike effect appears.
When set to auto-answer, the phone number is displayed once, when clicking to answer the call on the headset the headset stops, the handsfree icon dissapears on the ppc, the headset icon appears, and a normal conversation is possible, without stereo and mike effect.
When i only select handsfree pofile when pairing, the stereo and mike effect appear with and without auto-answer.
I also never get the name in the display, only the phone number, eventhough the name appears on the PPC, is this a setting somehwere, or just my headset (HBH-660)
Conclusion
What OS are you using?
I am assuming 2.02 or 2.06 with the registry hkey local M, software, Microsoft, Bluetooth, "HandsfreeProfileOn"
On my Jabra BT800, I still only receive a phone number if I do not have their number in the PPC call history or as long as it is not in my Contacts too.. IE.. It only displays if it is a brand new number.
On the Xlive, it displays the number or the name, no matter what.. Well that is until the xLive times out.. Now do not go out and buy one yet, my version 1.23c is the newest OS but it needs an update. It only works for about 10 min and then you have to turn it off and back on and push the BT button 2 times and then it will work again for another 10 min!!!! :evil: :? This also happens on my wife's MPX300 with the latest ROM so it is not a problem with the XDAII software.
Bottom line = With the 2.20 OS and my "fix", The stereo affect is gone on all of my devices.. ANYCOM HS-880, Jabra BT800, Xlive XBM-100, Motorola HS810 and some other Motorola BT headset that has a AAA battery in it..
(Yes, I have bought a lot of them.. I loose things and I was hoping they would work.) :roll:
Now about your 2.02 or 2.06 OS, When you said, "When set to auto-answer, the phone number is displayed once, when clicking to answer the call on the headset the headset stops, the handsfree icon dissapears on the ppc, the headset icon appears, and a normal conversation is possible, without stereo and mike effect. " I would like to know what happens when you set it to answer on 2 or 3 rings, maybe it will display the caller ID longer. Also, I would like to know if the stereo affect comes back when you get another call on call waiting.
I tried it in version 2.06 and it does not work. It can connect the bt earpieces, but no sound. It kills the connection with the original MS bt stack as well.
I believe the OS you are using is 2.20, just wonder is it a Simplified Chinese OS ?
adad said:
I tried it in version 2.06 and it does not work. It can connect the bt earpieces, but no sound. It kills the connection with the original MS bt stack as well.
I believe the OS you are using is 2.20, just wonder is it a Simplified Chinese OS ?
Click to expand...
Click to collapse
If you use OS 2.20 the problem is gone. During pairing select ONLY the first time is asks for Handsfree/headset. Discard the second time. (I Don't know why exactly)
Be aware that no matter how "simple" a headset looks, they have their own set of problems by themselves, not only XDA-II related.
And BT specs for protocol 1.2 is already out there....
:?
Man!!!! I do not know what is up now! :x :? :shock: :evil: :twisted:
On my BT800, I have tried setting it to No Auto Answer, un paring, re pairing with Selecting Yes to Serial, AND YES to both Handsfree/Headset prompts and I can not get it to mess up when another call comes in.
I have tried Selecting Cancel to Serial, Yes to the first Handsfree/Headset prompt and No to the second.. Still no problems.
I have tried only selecting the second Handsfree/Headset prompt and still no problem..
Now, remember, the BT800 sucks! The caller ID is not working BUT that is a Jabra BT800 issue.. It just sucks! Same problem with no caller ID on my wife's MPX300.
The only thing that I can see as my problem was I used to have BT Tools installed and I never could get it uninstalled all the way until I renamed the bthserial.dll. So, I am assuming that BT Tools also had it's own DLL for Headset too???!! Thus that was my problem? I guess.
So, my "fix" is wrong.. I take it back. It makes no difference!
I am sorry.
Looking Glass said:
If you use OS 2.20 the problem is gone. During pairing select ONLY the first time is asks for Handsfree/headset. Discard the second time. (I Don't know why exactly)
:?
Click to expand...
Click to collapse
I noticed NO difference on BT800, or my ANYCOM 880, or from my two Motorola ones.. I do not know if it makes a difference on other devices.
Looking Glass said:
And BT specs for protocol 1.2 is already out there....
:?
Click to expand...
Click to collapse
Could you explain more please?
On my xLive it only has one BT Handsfree/Headset prompt but on the xLive, it lets you select the pairing mode... Hands Free or Headset.
It ALSO has excellent caller ID display! When I may have had a Partial BT Tools installed, I only got caller ID. Now, I get the name too if it is in my contacts list!
I also found out how to use the xLive without all the problems!!!
It took me about 2 hours to do this..
BT headsets...
It looks like the other devices with caller ID on them, HBH-660 and the HBH-220 do not work great and I know for SURE the Jabra BT800 is crap.. (even in Headset Mode it takes up to 9 seconds to answer a call.. In Hands Free mode, it is only 2 seconds but the caller ID does not work)
So, the ONLY solution for those who want caller ID on a handy little device is, the xLive.
I recommend the xLive now. I found that the xLive will screw up if you press certain buttons or for other reasons explained below and if you do not press them or do the other things, it works fine.
I am not sure if People can get A2DP to work on the XDAII, I have seen most say they can't, SO, the next best thing is the xLive! It also supports caller ID and will list the Callers Name if it is in your contact list AND you can DIAL phone numbers with it, all while your XDAII is 30 feet away. You can dial numbers with it through pressing the BT button, selecting "Dial" and using the little joystick to select the numbers and then press the BT button again to dial!
xLive also supports MP3 streaming though a program the give you and a your typical BT device hooked up to your PC. I have one that only cost $39 and it works for about 150 feet. You can get past it's memory limit this way.
How to use the xLive with an XDAII with 2.20 translated ROM.
1. Pair it using “Hands Free” mode, selecting “Pairing Clean”, once, (you do not have to repair again)
2. When you FIRST turn the xLive ON or if you are unable to make call through it or get calls through it, press the Bottom Right Button for 2 seconds to turn it off. Then Turn it back on with the same button. Then Press the BT button on the front left, next to the screen, wait 4 seconds, press it again and wait 6 or 7 seconds until the little BT icon appears then press the Top Left button (A-B and Record, AKA cancel)
3. Never hang up a phone call using BT button! ONLY USE THE “END CALL” function of your phone or wait until the other person has hanged up. If you press it, redo step 2! (the BT button is the one on the left of the screen)
Problems that will cause you to have to turn it Off and then back ON again,,, IE. Repeat step 2.
You can ONLY reject ONE phone call.. After you do, go redo step 2
If you Miss a call, go redo step 2!
If you reboot the XDAII or the two get out of range of each other, you only need to press the BT button and then press the Cancel button after the BT icon appears again.
http://www.expansys-usa.com/product.asp?code=111023 128 $82.95
silver.
http://www.expansys-usa.com/product.asp?code=116333 256 $128.95 Black
http://www.expansys-usa.com/product.asp?code=111492 256 $128.95 White
http://www.expansys-usa.com/product.asp?code=111493 512 meg not out yet.
ccrrazzzy said:
Looking Glass said:
If you use OS 2.20 the problem is gone. During pairing select ONLY the first time is asks for Handsfree/headset. Discard the second time. (I Don't know why exactly)
:?
Click to expand...
Click to collapse
I noticed NO difference on BT800, or my ANYCOM 880, or from my two Motorola ones.. I do not know if it makes a difference on other devices.
Looking Glass said:
And BT specs for protocol 1.2 is already out there....
:?
Click to expand...
Click to collapse
Could you explain more please?
As for you first question: It does a difference to me. Some devices use different functions if they are paired ONLY as headsets or as HANDSFREE. The mess about "what you do in the two step pairing" is probably part of the problem. I've found that the first pairing is best for headsets (HBH 35, HBH 600) and the dual pairing is needed for carkits (at least for my BMW carkit).
Second question: BT specs 1.2 means that there are more profiles and functions that now can be implemented in more devices: SO MORE TROUBLES, and more chances for something to go wrong. There is a lot on information about BT specs out there, you can read about, and wonder what will happen with a device that implements them all.... the HTC/MS way!
And finally, some comments about the "erratic" behaviour of caller ID on your headsets: I've found some remarks noting that depending if your contact info for a certain number is stored in the phone memory OR IN THE SIM CARD, it might change how the info is passed onto your BT headset! So you can see the name, the number or even nothing at all for a few seconds.
:?:
Click to expand...
Click to collapse
Sorry, I have been away from this forum for a while and have decided to come back and try and face my BT issues again.
I am running
ROM 2.06.00WWE
Radio 1.18.00
ExtROM Sin.Merged.v1.0
on an XDA11 with a Blue Ant hands free.
Before upgrading the BT was crap.....long delays in answering, no redialling facility worked and the sound quality was awful.
Since upgrade I really couldnt tell you about the other issues but sound quality appears to be worse. My incoming is fine but out going, the hands free mike is not working and the phone is still receiving on its built in mike. I have tried pairing as "Handsfree" and "headset" with no difference.
Any ideas?
Cheers
Mark
OK,
sat in the car had a beer and tried again. Selecting "handsfree" when prompted and no and no to headset enables the in car mike and allows outgoing calling. But does not allow incoming calls pickup.
Every other config of headset and handsfree combo selections removes the in car mike from working.
Go Figure?
Cheers
Mark
teknophob said:
OK,
sat in the car had a beer and tried again. Selecting "handsfree" when prompted and no and no to headset enables the in car mike and allows outgoing calling. But does not allow incoming calls pickup.
Every other config of headset and handsfree combo selections removes the in car mike from working.
Go Figure?
Cheers
Mark
Click to expand...
Click to collapse
Hi! As said before, you'll be better off with 2.20.
2.0x versions work mostly OK as far as functions, but then you have the dual mic/speaker problems....
Read the forum, there is NO perfect BT solution, in fact, there is not a official version claiming to support HandsFree profile...
Yep,
I hear you, I know the o2 is not handsfree compliant only headset.
The local gurus at Strahfields are trying to sell me the latest Nokia bluetooth hands free.
I quote,
"Its compatible with everything and my mate has got an o2 and it works fantatsically" unquote.
But they where not prepared to give me a demo.
Cheers
Sorry if I am being stupid, I currently use the Diamond 1.2 ROM and have a BT800, so I know all of the problems in trying to get the mic working etc.
Is there an English ROM with 2.20 that's easy to install?
There are so many references and links to various CAB files on here, but as I use my XDA2 for business, as well as pleasure, I don't have time to experiment I would like to find an installer, do that, and then add my own apps, and be up and running within an hour.
I bought the BT800 for the call quality, not the extra features, but now I have a headset that can do so much more, I would like to make use of all the features, but not at the expense of the PDA's stability, although saying that, Diamond 1.2 gives me the hang on reset issues, and random slow down issues too, so it may be better to change to something else anyway.
ccrrazzzy said:
I think I found a fix for the BT Hands Free not working the way it should.. I can even use call waiting now and it does not kill the mic when I switch back to the first call..
I set the phone settings to automatically pick up after one ring.. No, it will not automatically pick up after one ring but, now I am getting the name to display in the caller ID field of my xLive mp3-BT headset. and it is working consistently.. I HAVE NEVER gotten it to work consistently before.. NEVER. i will try it with my Jabra BT800 later too.
I think it makes a "deeper" or better connection by making the phone try and make the BT headset device automatically answer???
I am using 2.20 OS and it is the only one that I have found to work, (not fully but it does work BETTER), please try this with other Hands Free devices like car kits and HBH660 etc.. Also try this with 2.02 and 2.06
Click to expand...
Click to collapse
Hi,
I see you are using Xlive Bluetooth MP3 Player... so I want to know if I can use it with the Motorola HT820 ( http://www.mtekk.com.au/tabid/54/articleType/ArticleView/articleId/641.aspx ) and my xda II whit ROM 2.20 ....
Thanks
Does anyone recognise having problems when using a parrot CK3100 with the S740? When I answer an incoming call, the parrot sort of disconnects so I have to get the phone in hand to speak. There is a sign of a tone in the display with a stripe through it. I already updated the parrot-software but no luck. Also checked the compatibility-list of the parrot and unfortunately the S740 isn't in it.
Therefore I'm just wondering if anybody else uses the CK3100 and experienced the same problems but somehow managed to solve them?
Thanx in advance for a reply.
A question : Do you answer the call using the answeringbutton on the carkit or the phone? When you use the phonebutton this is normal.
I also have a lot if issues with the parrot carkit MK6000. After a call it takes 2 minutes before the carkit can be used again (carkit needs to reconnect to the phone and is doing this after 2 minutes) and at every connect it wants to start to download the contacts from the phone. But it never completes. It's about time parrot releases an update.
Solved!
Thanx for your helpful question/answer! The parrot appears to work perfectly when you only use the device on the dashboard to make calls and answer them. With the latest software update 4.18b (which I installed earlier) all works like a charm. Just don't use the S740 to make calls or answer them while it's connected to the parrot.
Hi, i'm Jay i recieved my HTC Touch Pro 2 the other day and i've paired my Sony Ericsson bluetooth headset but i cannot get it to voice dial.
I've installed Vito Voice Dialer, set up the voice command but still no luck with the voice dialing.. Is there a particular headset i need to be able to voice dial or do i need a different programme?
I need the voice dial to work through the headset..
Thanks in advance
No Voice Dialing
It is not possible at this time, because TP2 has another blue tooth stack (see also different threads here).
Gerhard
just a matter of time though mate..... prob happen soon <fingers crossed>
I can get bluetooth voice dial to dial through my car stereo... isn't it using the same technology?
VoiceDialing via Bluetooth handsfree
leanne said:
I can get bluetooth voice dial to dial through my car stereo... isn't it using the same technology?
Click to expand...
Click to collapse
Can you cut out your ROM VoiceDialing software and share with us?
I have a Russian ROM and it does not have any VoiceDialing, but I would like to have one.
Nottz_Jay said:
Hi, i'm Jay i recieved my HTC Touch Pro 2 the other day and i've paired my Sony Ericsson bluetooth headset but i cannot get it to voice dial.
I've installed Vito Voice Dialer, set up the voice command but still no luck with the voice dialing.. Is there a particular headset i need to be able to voice dial or do i need a different programme?
I need the voice dial to work through the headset..
Thanks in advance
Click to expand...
Click to collapse
Voice dialing works great on the TMo version. Not as quick as before with my previous MDA. I say dial "XXX mobile" and it responds "dial XXX mobile" and I say yes and it calls. Also works for app launches etc.
Cyph
Does it work via Bluetooth Handsfree without pulling phone itself?
hecksk said:
Does it work via Bluetooth Handsfree without pulling phone itself?
Click to expand...
Click to collapse
Parrot ck3100 does, but I think it has the voice control software itselft...
I used to use aged SonyErricson T630 + HBH835, I had voice dialing with. But TP2 should be some kind of "PRO" ... well do you think it is impossible to activate this feature at all???
This is great news it is possible actually, but can you tell what kind of Bluetooth stack you have in your TP2? If I go to info dialog it says vesion 1.9.0 Build 4400, HCIv4.72/LMPv4.33031(15). What do you have in it?
thanks a lot.
anyone knows if cyberon voice commander works on TP2??
cyberpunk627 said:
anyone knows if cyberon voice commander works on TP2??
Click to expand...
Click to collapse
It works. But PTT function of bluetooth handsfree does not anyways.
thank you very much hecksk. it's the only software having italian TTS to read sms (useful when driving or - as it often happens to me - your hand are busy holding the work bag, jacket and so on). bluetooth ptt means that I can't use by headset to give commands, right? awful then... I hope that someone will come out with a solution soon... strange that such an important feature is missing on a businness device like this..
HTC support said, that they have no idea why bla-bla-bla, please contact handsfree manufacture (SonyErricson) and voice dialer (VITO).
It's funny answer seems like standard reply form. Sad.
Hope there is some solution for this issue...
So if I palnning to get a " Blueant Q1 " Bluetooth headset will it work with T-mo. TP2?
Anyone using Blueant Q1 ???
I upgraded to wm 6.5 to get my bluetooth fully functional.
Does it work via Bluetooth Handsfree without pulling phone itself?
Click to expand...
Click to collapse
Yes it does.
what version of bluetooth driver(stack) do you use for?
please describe how did you make it?
because mine TP2 does not work with SonyErricson HBH-IV835 handsfree, I used use it with SonyErricson phone and also checked with Nokia's...worked fine.
read this!!!
palah said:
Update... HTC tech informed yes MSVC is working correctly as tested on the TP2 units they use ... the 'Dopod' reference on post above referred to the brand of Headset not the dopod pda....
So voice activation via BT headset on MSVC works on some units not on others (depends on your rom) ... his advice... activate MSVC via the TP2 until a rom update... he said check weekly to see if one happens (so must be in pipeline) He also said Microsoft was working on MSVC as it does not play 100% with new Bluetooth Stacks so expect a new version (from v1.6) some time in future ... seems unless an industrious person finds a cab fix ... the only other option now, is find a rom that works and use that (which can bring other issues)
Click to expand...
Click to collapse
this post belongs to this thread: http://forum.xda-developers.com/showthread.php?t=554751&page=3
this looks super good, I'm so happy guys! Let's hope that it is all true, and not just smoke in our eyes
hi folks,
i have the following problem with ANY handsfree-sets:
pairing the phone: works.
sync of adressbook: works.
dial or take over a call: works.
i hear the caller clearly, --but no one hears me-- ?!?
looks like ANY kind of bloetooth mic does'nt work
what i have tried so far:
updated the Parrot CK3100 in my car to the last firmware. (V 4.23)
tried in my wifes BMW with OEM car-kit.
tried an old Logitech bluetooth head set
tried in an VW (don't know if it was OEM or aftermrket)
on the phone:
a LOT of soft- and hardresets.
tried a ROM from HTC-webpage.
as my phone was O2 branded, installed a new ROM from O2 webpage V 1.57.207.1 (GER)
..but it's always the same: i hear the caller, but no one can hear me ...
any ideas ?