Related
I've tried several of the SE roms floating aroung the forums with my I-mate and finally setteled with the translated 2.20.07CHS one.
This rom obviously has Hands-free profile implemented to some degree, I bond my Bluetrek-G2 with the phone, and a long keypress on the G2 properly invokes the "Last call redial" feature of Hands-free.
My question is: to what extent is the hands-free profile implemented? Specifically I'm interested to know whether the "Caller ID" feature is implemented, so that headsets with built-in LCD displays for caller ID (e.g. Sony-Ericsson HBH-660 and the upcoming Jabra BT800) can be put to full use.
Any experience regarding this issue?
I saw some review/post from people with caller ID bt Headset
saying that is working fine , with the caller ID with the 2.20 CHS ROM
Were those posts on any of the XDA-DEVELOPRS forums?
NO, I saw them @ some chinese forum
which few model of caller ID Bt , working fine
"peoples say"
Here is my experience with an XDAII and a SE HBH-660
With ROM 2.02.t1, can setup the HBH-660 as a handsfree device, caller id works great, but the mic on the headset does not work at all!
With ROM 2.06, can only setup the HBH-660 as handset device, so clearly caller id does not work here, but at least the mic on the headset works!
Haven't tried 2.20, got tired of reflashing and hard-resetting my device after trying every steps suggested in the forum, even merging the 2.02.t1 and 2.06, which still has the same problem as the 2.02.t1 ...
Currently sticking to ROM 2.06 and using Pocket Bluetooth Tools 1.10. At least I can redial from the HBH-660, answer calls and transfer calls back and forth between the HBH-660 and the XDAII ...
skuld said:
Here is my experience with an XDAII and a SE HBH-660
With ROM 2.02.t1, can setup the HBH-660 as a handsfree device, caller id works great, but the mic on the headset does not work at all!
With ROM 2.06, can only setup the HBH-660 as handset device, so clearly caller id does not work here, but at least the mic on the headset works!
Haven't tried 2.20, got tired of reflashing and hard-resetting my device after trying every steps suggested in the forum, even merging the 2.02.t1 and 2.06, which still has the same problem as the 2.02.t1 ...
Currently sticking to ROM 2.06 and using Pocket Bluetooth Tools 1.10. At least I can redial from the HBH-660, answer calls and transfer calls back and forth between the HBH-660 and the XDAII ...
Click to expand...
Click to collapse
You may have a look at this thread to see how to turn on the Handsfree on ROM 2.06
http://forum.xda-developers.com/viewtopic.php?t=14386
Tried that as well ... got even worse results, sometimes the headset works and sometimes it doesn't ... have embarassed myself in front of people by wearing the headset on my left ear and still putting the phone to my right ear ...
skuld, I suggest you try 2.20.07CHS, it is the most stable 2003SE out there, and Bluetooth works great for me using the Handsfree profile (sound only comes out of the headset and the headsets' mic is operational).
I intend to purchase the Jabra BT-800 as soon as it is released and hope toi take advantage of full Handsfree functionality with it finally.
If you do decide to upgrade to 2.20.07CHS, please let me know if caller id works for you with your HBH-660.
so?
So, basicallly, the non-chinese speakers, are stuck with non fully working BT profiles, since handsfree option identifies every headset as hansdfree, and then the problem with the "stereo" effect appears.
In my case, both (device and XDA) mics and both speakers work simultaneously either in SE HBH 35 headset or BT Carkit.
Can please confirm 2.20 version solves that totally?
Any idea on why it has not been released in WWE?
2.20 indeed solves this problem, I'm currently running 2.20 for several days with no problems, the translation to English provided by Buzz is impressive and comprehansive. I don't speak a work of Chinese yet have no problems using my device, I have yet to come up with a Chinese message-box/notification of any kind. Bluetooth works flawlessly with my Bluetrek G2 using Hands-free profile.
Ummm..
Will give it a chance.
Keep me informed should you find any other problem using this version.
:wink:
yes so far so good
2.2 is a offical OS ROM for dopod 696 , which the same hardware as xda2
so it is working fine with the caller ID & bt sound
Anyone can provide me the complete REG file of 2.20CHS?
darren_the said:
yes so far so good
2.2 is a offical OS ROM for dopod 696 , which the same hardware as xda2
so it is working fine with the caller ID & bt sound
Click to expand...
Click to collapse
I converted the reg file from default.fdf of the ROM, but it seems to be incomplete when I compare it against 2.02 and 2.06.
I understand that Kinglee uploaded the PHM reg backup file. Can someone give me a hint how I might convert that file to a text readable format?
Re: so?
Looking Glass said:
Can please confirm 2.20 version solves that totally?
Any idea on why it has not been released in WWE?
Click to expand...
Click to collapse
I can confirm that 2.20 uses different bluetooth DLLs than 2.02 or 2.06.
After configuring BT headset, the user is prompted with BTBond_UI.exe screen with checkbox for headset/handsfree enabled, and greyed out checkbox for ActiveSync, Dial-up Networking and Serial.
There is quite a number of differents in the registry settings as well.
I think I just about manage to port 2.20 BT over to 2.06 (or 2.02 for that matter).
However, I need you guys to give me pointers on a couple of things:
(a) for handsfree profile - can 2.20CHS users enable the handsfree profile and use only the headset microphone to speak to the recipient?
(b) what about current 2.02 users?
(c) What can 2.20 CHS users do with their current BT settings? Please describe what you are allowed to do.
- No merry christmas present...hopefully, there's one for happy new year, aye? :wink: -
can someone post the file BTBond_UI.exe i need to try it on 2.02t version
BTHFP
Ok here's the skinny.
On 2.06 got BT HandsFree profile to pickup and end calls via headset with stereo audio but headset mic still off (Xda II mic on).
Anyone got the headset mic to work?
Need 2.20 registry to understand how BTBond_UI.exe and other *.dll works.
I posted blue tooth mic not responding to voice input topic a couple of days ago, from responses I got ... I decided to upgrade from 2.02 to 2.20 CHS, (it's a good upgrade it's got WMP 10 but no letter recogniser or transcriber input ??).... but alas G2 BT would still not respond to voice.
Then I had an idea..... I went back to the the 1.72 ROM (radio 1.17) and guess what ? The G2 blue trek headet now works Not really what you'd call progress....... but a fix !!
I would like to upgrade back to WM2003SE, but I have no idea what combination of ROM software will deliver the latest features of the upgrade plus the full functionality for the bluetooth device ??
So anybody out there know what combination works ??
BTHFP
MJW said:
Then I had an idea..... I went back to the the 1.72 ROM (radio 1.17) and guess what ? The G2 blue trek headet now works Not really what you'd call progress....... but a fix !!
Click to expand...
Click to collapse
Are you saying under 1.72 your G2 is able to enable HandsFree profile perfectly? What BT driver did you use Bro?
Steady...... I am just a beginner at this !!!
What I am saying is that with the 1.72.00 WWE ROM the G2 now works i.e I can hear through it and when I speak into it I can be heard. Pressing the button on the headset picks the call up and ends the call. What it doesn't do with this level of software is last number redial.
As for the BT software I have no idea what I am running ? Is there a way of finding out ? The 1.72 update was from the 02 site.
I have downloaded the 3500 BT patch and was wondering about upgrading back to 2.20.07 CHS + the patch and see if that works. Thoughts ? But I need the letter/Transcriber input and I am not sure where you get those and how to add them to the XDA2.
BTHFP
I am running both the WM2003SE MSBT and BC/WC 3500 BT on my Xda II.
Probably you are referring to the HeadSet profile Bro. We're discussing about the HandsFree profile - correct me if I am wrong.
Can I use my Nokia CK-1W carkit with my MDA3. Does anyone have that info.
I use my 9090 with a sony ericsson HCH300 car kit,
Works great!
The ericsson car kits work better than the nokia with the pda's, they pair up ok but incomming caller complains or echo.
i use parrot ck3100, but don't I get that when I enter to the car, it is connected alone to the pda??
regards
hugot said:
I use my 9090 with a sony ericsson HCH300 car kit,
Works great!
Click to expand...
Click to collapse
Hello Hugot
tell me something, with HCH300 you can answer the calls trough the carkit or you have to press the green button on the pda?
Any complaints on the other end? do your friends complaint about that echo problem or something like that ?
Portuguese do it better
can't find it !!!!
I've been searching for the SonyEricsson site for tha HCH 300 car kit and can't seem to find it anywhere...
i've found HCB-300 and HCB-30....any of these ???
I ment HCB-300 and NOT HCH-300 (Sorry).
Hello Hugot
tell me something, with HCH300 you can answer the calls trough the carkit or you have to press the green button on the pda?
Any complaints on the other end? do your friends complaint about that echo problem or something like that ?
Click to expand...
Click to collapse
I can answer the calls where i want, either on the pda or on the car kit button, i can even redial without touching the pda.
No complaints on the other end, no echo, my friends complaint about echo sometimes but it's when i'm talking to the pda, without car kit.
another question...
hugot said:
I use my 9090 with a sony ericsson HCH300 car kit,
Works great!
Click to expand...
Click to collapse
hello again Hugot,
tell me, can you get other sounds through HCB 300? like navigation instructions for example ? or mp3 sounds ?
hugot said:
I ment HCB-300 and NOT HCH-300 (Sorry).
Hello Hugot
tell me something, with HCH300 you can answer the calls trough the carkit or you have to press the green button on the pda?
Any complaints on the other end? do your friends complaint about that echo problem or something like that ?
Click to expand...
Click to collapse
I can answer the calls where i want, either on the pda or on the car kit button, i can even redial without touching the pda.
No complaints on the other end, no echo, my friends complaint about echo sometimes but it's when i'm talking to the pda, without car kit.
Click to expand...
Click to collapse
Hugot, i currently have installed the Nokia CK-1W carkit. The other party is complaining about echo. With the SE HCB-300 this is not happening? Please be honest, cause i am about the remove my NOKIA and install the SE one.
I use my Qtek 9090 with a Nokia C7-7W carkit. I hear my callers and whom I call to very well, but they hear an echo. Can anyone tell me how to prevent?
I use a parrot ck3100, the only problem that I have is that I don't get that they are connected alone when I enter to the car and I light the contact.
regards
try upgrading the parrots firmware from driveblue.com and making sure bluetooth is switched on before the parrot
i have the last versión, the one problem is that the parrot don´t connect to pda only when i enter in the car ....
Sorry about my late answer if it stills help here it goes.
I can't use anything else then phone calls with my HCB-300. No Mp3, directions, etc, even the ring tone is from the car kiy and not the one on the phone.
No one has claim about echo or anything else, i think that the other callers can't even notice that i'm using a Car KIT.
It's GREAT!
I got a Parrot CK3100 yesterday and I don't get any echoes which is good, the Nokia ones seem to echo a hell of a lot.
Caller ID on the car kit works, and once the contacts have been sent via bluetooth (one by one unfortunately ) the name pops up on the LCD display, its really good, better than I thought it could be when I ordered it.
Haven't tried voice dialling yet, has anyone who has one set the option to use voice dialling from the car kit instead of the phone? does this work?
Hi folks,
Greetings from Italy.
First of all congratulations for this web site and thanks to all people who share their info's with others.
Problem: I use a Qtek 2020 with his original latest ROM 1.75.04ITA, radio 1.14.00, with a Logitech BT headset . This configuration works fine, and I can make/receive phone calls without any problem. I also have installed TT5 with a BT GPS Leadtek device and it works fine, BUT I can't hear TT5 vocal instructions in my BT headset! The voice from TT5 is only available on Qtek speaker.
If I receive a phone call during TT5 usage, the phone call is correctly diversed on my BT headset, on TT5 screen appears an icon showing 'Vocal instructions suspended' (but the graphic instructions are ok) and at the end of phone call the vocal instructions start again.
Note that using wired headset all works perfectly.
How can I hear these vocal instructions into my BT headset?
I know using Nokia 7710 with identical configuration it works fine, why using Qtek isn't?
Pls help me! It's is very important, because I'm an ambluance driver, and this function should be VERY useful for us in our job.
I'm availabe to all modifications: i.e. change ROM, change BT stack (but I'm not able..need instructions..), change WinMobile version... whatever you want if it can be the solution!
The only thing I don't want is to buy another device or a BT adapter.
Thanks,
Valerio
Does anyone recognise having problems when using a parrot CK3100 with the S740? When I answer an incoming call, the parrot sort of disconnects so I have to get the phone in hand to speak. There is a sign of a tone in the display with a stripe through it. I already updated the parrot-software but no luck. Also checked the compatibility-list of the parrot and unfortunately the S740 isn't in it.
Therefore I'm just wondering if anybody else uses the CK3100 and experienced the same problems but somehow managed to solve them?
Thanx in advance for a reply.
A question : Do you answer the call using the answeringbutton on the carkit or the phone? When you use the phonebutton this is normal.
I also have a lot if issues with the parrot carkit MK6000. After a call it takes 2 minutes before the carkit can be used again (carkit needs to reconnect to the phone and is doing this after 2 minutes) and at every connect it wants to start to download the contacts from the phone. But it never completes. It's about time parrot releases an update.
Solved!
Thanx for your helpful question/answer! The parrot appears to work perfectly when you only use the device on the dashboard to make calls and answer them. With the latest software update 4.18b (which I installed earlier) all works like a charm. Just don't use the S740 to make calls or answer them while it's connected to the parrot.
i just bought an 07 infiniti g35. when i try to use the Bluetooth hands free set, weird thing happens.
the phone pairs and connects without any flaw, and voice command works. but after the call connected, i can not hear what comes out from the car speaker but only static noise, neither the other person can hear me.
i tried to pair my friends' nokia and iphone to the car and they both worked. then i paired my x10 to other bluetooth devices and it worked as well. therefore, both my car and phone seems working fine, but they wont work together.
can anyone help me with this?
my x10 is rooted with freex10 and latest baseband.
can anyone help? or even just address the problem?
i have tried almost all the roms in development section, and no luck. is there any settings could affect this?