Hi buddies!
I'm really fed up, so I hope someone can help:
I updated my QTEC 1010 to WM2003 ROM-Version 4.00.40 official T-Mobile ROM, Radio-Version T313.
I can normally connect to GPRS, but when my QTEC goes into suspend mode, the GPRS connection would be aborted and I have to pay for another 100kB data traffic
This is really going to drive me crazy.
Has anybody an idea how to fix this problem?
Thanx for your brainwork,
cork
www.GB-SOFT.cz/XDAII
program which let you deside
Well, Rudegar, thank you.
BUT, the program does not fix the bug....
I'm a little bit hopeless. It's the same as before i connect to the internet, the QTEC goes into suspend mode and kills my GPRS Connection. It's totally weird.
Related
Hi Guys,
really dumb question ... how do you disconnect from gprs once connected ?
I can not see an end button anywhere !!!
cheers
i have just worked out that if you disable phone, it turns off GPRS...
surely that is not the correct way to do it? :roll:
sorry to nag .....
does anyone know how to cut gprs once connected ??
maybe its so obvious, noone knows it !
maybe its so easy, no one can be bothered to write ?
let me know please !
install monitor
Install the spb gprs traffic monitor is the answer.
You can also simply tap the signal sign (at the top of today screen), it'll show your GPRS connection and then you can simply tap end buttom Cheers
not on ppc2003 .,... there is no end button on the signal sign :-(
Install the spb gprs traffic monitor is the answer.
-----------------------------
is this the solution for PPc2003 ?? surely there must be an inbuilt feature which allows you to disconnect GPRS without the need of installing other software ??
please advise
I have the same problem and i asked in deffirent places in this forum but no anwser till now.
ARZLEB said:
Also i have a problem when connecting to GPRS there is no d/c button i had to push long the red close button to d/c my GPRS session after 5 seconds exactly i will loose service signal i have to turn off/on phone to re obtain signal!
any one noticed this?
:?
Click to expand...
Click to collapse
I hope someone would anwser this!
Can maybe the developers step and and show us the light?
Much appreciated :wink:
now have you got ppc2003 to connect to uk 02 grps?
what the correct settings as i can not get mine to connect at all
please pass the on
hi grim,
sorry mate, i only use Orange Gprs :?
try
Homepage: http://pda.o2.co.uk/
APN address: mobile.o2.co.uk
Username: mobileweb
Password: password
Email servers (POP): mail.o2.co.uk
Email servers (SMTP): smtp.o2.co.uk
DNS Servers: 193.113.200.200 and 193.113.200.201
nope I can not get it to connect to grps at all
i must be doing something wrong? anyone done it ok to 02 uk grps?
This appears to be a "new feature" of WM2003, always on GPRS . It does seem to timeout the connection after a little in-activity.
I'm in the same boat and cant for the life of me imagine why they have programmed this way. I can only imagine it's a bug and will be fixed.
Thought I was just stupid
We'll technically I am I was soft restting to stop it to start with
Looks like I'll have to put on Spb mon
You can also turn off the phone (tap the reception button and click "turn phone off"
and turn it back on !
also cuts GPRS
Right, Ali-Butt, it's also the way I do it ! : turn the phone" off",GPRS is also diseable, then come back to put the phone "on" ... if someone find a better way :idea: ....post-it please
Well the best solution i discovered is to use Sbp GPRS monitor, since you wont benefit from the Auto Connection / Disconnection while checking your email since the device will connect but never d/c. So all connections and d/c and done manually by you instead of using the Off / On methode use the Disconnect button in the GPRS monitor for the time being until they find a solution for this bug and yet you wont have to turn to phone off and on, consume power or someone calling in this exact min to find that your phone is switched off.
If you dont have Sbp GPRS monitor i am whilling to share it with the ppl having this problem.
:wink:
I've installed 2003 and it's all great. A few problems with the syncing but after 3.7 (strange, I had 3.7 anyway though since I've reinstalled it off the MS website it looks different to the 3.7 it used to be??) it did eventually work. Scary few mins though!!
I bought All-locations GPRS counter a few months back, but the one thing it doesn't really have is an end connection button. I also bought SPB's PocketPlus but it's saying that it's not compatible with PPC 2000????? Does anyone else have this problem? I've tried logging onto their website but it seems to be down all the time. This program used to automatically cut the gprs connection if say I'd loaded MSN and then shut it down. Very handy!! If anyone knows how to get past this or where they've put an update to work on 2003, please let me know.
In the meantime ARZLEB, if you could find it in your heart....
Cheers
V
'Always on' is a great idea, PPC2003 can disconnect automatically and re-connect when a phone call comes in so why is it an issue? The only reason I can think of is cost (if you have something polling the internet racking up MB's).
For delivering mobile applications and corporate push E-mail, this feature is essential.
These devices are not really targeted at the consumer market more at the business user so the carriers will love this feature to deliver extra services and generate GPRS data revenue.
Hi All
the best solution is the easy one , simply press on the hardware button ( the red button ) for about 2 seconds and it will disconnect the GPRS Connections !! easy ha !! :wink:
Cheers
Ahmad
Hello i have PDAVIET 4.0.0.0.4 and i have a problem when i m connected to a wireless spot, and i want to signin to msn it uses my GPRS connection although i am already connected to the internet.
Any suggestions?
Thanks!
click cancel on baloon tooltip,and i'm not sure about your rom version,pdaviet maybe?
yes sorry
))) did you solve the problem ?
nope sorry
I'm with rom 4.0.0.3a and I also experience this. I tried using Live messenger connected to activesync through usb cable connection, but instead of using the activesync connection, he tries to connect over gprs!!!! Argghhhhh!!!
Beside iassael, the others who run 4.0.0.4 are also experience this bug??
i think so and i also had the same withh 4.0.0.0.3
well, I don't have wifi by my computer, but I soon will, so I'm interested in this issue...what about trying what this guy says;
It is a solution to a different problem, so maybe a bit of a long shot, but something he says there;
The beauty is that Windows mobile knows it needs to use the "GPRS Internet", only when other connections are not present.
Now you don't have to mess with selecting a proxyless connection when connecting to a WiFi source, or using activesync
Click to expand...
Click to collapse
made me think it could be worth a try.
http://forum.xda-developers.com/showpost.php?p=1283391&postcount=1
did you fix it?
I dont see how this will work. If default is set to not GPRS, you have to have wifi or connected to computer. it will not use GPRS as backup. at least i havent been able to get it to think that way on WM5 and WM6.
any solutions to the login problems using ? I still couldn't access MSN with PDAVIET 4.0.0.0.4 ROM
so i recently went to the wm6 ROM 'Hermes_WM6_WWE_vp3G_v2.0_ATT' and am using that new 1.48 radio. IPL is 1.04 and SPL 2.10.
now when i am on the phone (voice) or am synched to the computer, i lose my internet connection???? it comes back as soon as i hang up or unplug the USB but what gives with this? is there a setting that i need to activate or some patch for the ROM that i need for this? i just noticed this today but is über frustrating and i can't figure out why this is happening. outside from that i like this ROM build but this internet thing is irritating. any ideas?
There is a setting on your PC when you set up active sync for your device to keep the internet connections even when you sync to the PC. As far making a voice call, you can only do that while on 3G, not on Edge.
yeah I know about the activesync setting I think that might be the pc prooblem because I can't remember if I checked that box but anyway... I like in the middle of orlando fl and the data only switches between hsdpa and 3g, I am talking about dropping the internet while on the phone and in a 3g area (like my house). I just assumed they might be connected but maybe not. I can fix the activesync issue no problem but about the voice call situation I don't know. I might just try a different rom and/or radio because now that I have upgraded it seems the device is slightly slower and the battery life sucks too... any more ideas please let me know.
Hello, I am very new user for ATOM LIFE>...
I finnally upgraded to my wm6 ENG version and was so glad that There 's a very nice guy answering my questiion and helping me out.
I"m so... overwhelmed.
anyway..
Now i Have a wifi problem...I have used XDA neo before and it catches wifi signal very well but my atom life doesn't catch a thing..for some reason..
*********Do i need to do some setuping or something?? for strengthen the wifi signal? ( I tried the WIFI utility but it doesn't show any difference)
Please let me know.. HOW...guide please...*************
and also, When i tried to connect with WINDOWS LIVE or messenger, even though wifi was on and was connected it kept saying
"Contact your cellphone Provider or change your internet settings.."
I don't get it why I think it's something to do with my WIFI connectivity..like weak signal..maybe
So basically, my question is
***HOW TO make wifi signal stronger? is there any wait to alter it ? using program maybe or..registry??
Please HELP me out ...noob here... I don't know nothing...
Also is there any way to reduce battery power? ATOM LIFE consumes a lotta battery .......... i found..
I willl wait for your GREATEST HELP Pro users !!!
HELP ME !! thanks.
omg
nobody has an idea..?
Wifi.. singnal strength is purely based on Hardware..
WiFi of O2 seems mis-leading you, first just check whether the WiFi signal did has a problem on your O2 by checking --> Settings --> Connections -- WiFi. (1) Then Check WiFi Utiltity (2) For some reason if (1) DID NOT goes to then screen with Preferred APs / search APs When (2) WiFi is turned ON, then probably your O2 has a software problem / crash. just backup everything and hard reset it with a clean boot (NO backup restore and no software installed). Try to use the MSN again by WiFi and see if the connection goes well.
Sorry if I oppened a topic what is alleeady active but I was searching and I couldn't find a topic what is discussing things about this subject. My question is how can I cheak that the phone what they send me is fully working and for example this one I have problem with internet how can I repair the problems?
pendramoon said:
Sorry if I oppened a topic what is alleeady active but I was searching and I couldn't find a topic what is discussing things about this subject. My question is how can I cheak that the phone what they send me is fully working and for example this one I have problem with internet how can I repair the problems?
Click to expand...
Click to collapse
Give full information dont expect use to guess .
jje
.
I recived the phone saying that if I have problem with the setting text AXTIVE TO 2020 o2 service. Ok I have done it and I got wap on it but after using it for 15 min wap gone. I had to turn off and in the phone. At home I had a wifi connection after 20 min it has gone. Then I got angry I have done a factory reset for s2 (I got it for the phone from 02) and after I didn't have wap so I had to text ACTIVE to 02 and had wap but having same problem. So I have questioned my self does this phone has other problem is well? How can I check it? How can I resolve this problem.
Is english your native language? I am still not fully understanding what the problem is...
Are you having issues connecting to your wifi at home, school, or work?
Are you having cellular data issues?
Im also not familiar with what texting "Active" to 02 is about. Im sorry but you really need to calm down a little, understand that we can and will try to help but you really have to give us a more detailed look into what is going on.
Remember, we are not there, we do not see what you see, hear what you hear, or know what you know. you have to tell us.
English clearly isn't his native language.
But, what he is trying to say is that he seems to having connectivity issues with both wifi at home and when connected to mobile data. When he texts "ACTIVE" to the 02 help line number, it restores his connection but only for around 15 minutes before it drops off again.
As for the problem, I have no idea. I would return the phone to 02 and ask for a replacement.
Yes I'm Hungarian. what I tried to say is that I am able to use the wap net work and wifi but it keep droping me out from the service. So after 15/20min restart he phone and again I have internet. I don't know why? AlsoI don't know if there is any other problem on the phone can I get a program what is run a test on it and repair the problems?
Not sure what your problem is, but if you have the mobile data connection active (the signal bars at the top of the screen show a G or 3G or H or E) and then switch on WiFi. If WiFi makes a connection to a wireless device, then the phone temporally disables the mobile data connection. If you disconnect your WiFi connection, then the mobile data connection becomes active again.
Even if the WiFi has connection to a wireless device, the device may not let them have access to the internet. So even though you have mobile data connection on, you won't be able to connect to the internet.
Switch off the WiFi and just test the mobile data connection. If that is fine, then you need to look at what the WiFi is connecting to. If it is not fine, then you need to find the mobile data connection settings for you phone network.