Related
ok, Mousey here on the forums had dumped the Orange UK ROM from his Hermes; he then used buildimgfs to create a proper imgfs image; after this, we then wrote this imgfs to the AKU3.3 ROM (using it as a shell essentially) and the result was a successful flash and his PDA was running Orange UK OS ROM, so it would seem that it IS possible to create images of dumped ROMs, but I would advise that you make sure the NB you create is bigger than needed so as not to fill it completely.
All Working Beautifully.
1. I Took The Part02.raw Of A Dumped ROM And Dumped All The Files Using "viewimgfs" from the imgfsTools
2. I Created imgfs_raw_data.bin File From A Random AKU 3.3 OS.nb File Using "aWaiter".
3. Then I Created imgfs_raw_data.bin From The Dumped Files Using "buildimgfs" from the imgfsTools, This Overwrites The imgfs_raw_data.bin File Created In The Previous Step.
4. I Then Merged My imgfs_raw_data.bin With The OS.nb From Step 2 File Using "aWaiter".
5. Then I Created The nbh File Using The Orange Splash Screens And The Romanian EXTROM Using dutty's Rom Koch
6. Finally I Added It To The CustomRUUUpdater Created By Olipro.
And Then Flashed It. Now I've Unlocked The ExtRom Im Going To Add In The UK Files And HardReset.
Links To The Installer
Torrent - http://www.mininova.org/tor/608219
Megaupload - http://www.megaupload.com/?d=V2JTBWSZ
Cheers
hi
i have a dead m3100 and i read that i need a shipped orange uk rom to give live to my hermes. with this rom is this possible? my BT is 1.06 and my m3100 stops in the spash screen. regards
ventinho said:
hi
i have a dead m3100 and i read that i need a shipped orange uk rom to give live to my hermes. with this rom is this possible? my BT is 1.06 and my m3100 stops in the spash screen. regards
Click to expand...
Click to collapse
currently a shipped Orange UK ROM doesn't exist, and we don't have the capabilities to produce signed files... but since it seems your bootloader is intact, I would suggest you try the KITL trick described on the wiki
mousey_ said:
All Working Beautifully.
I Took The Part02.raw Of A Dumped ROM And Dumped All The Files Using "viewimgfs" from the imgfsTools
Then I Created imgfs_raw_data.bin From The Dumped Files Using "buildimgfs" from the imgfsTools.
I Copied An OS.nb From The AKU 3.3 Test ROMs Into The Folder Then I Merged My imgfs_raw_data.bin With The OS.nb File Using "aWaiter".
Then I Created The nbh File Using The Orange Splash Screens And The Romanian EXTROM And Added It To The CustomRUUUpdater.
And Then Flashed It. Now I've Unlocked The ExtRom Im Going To Add In The UK Files And HardReset.
Links To The Installer
Torrent - http://www.mininova.org/tor/608219
Megaupload - http://www.megaupload.com/?d=V2JTBWSZ
Cheers
Click to expand...
Click to collapse
So you dumped a ROM from a phone and merged it with a shipped ROM that was AKU 3.3? Was the "phone ROM" AKU 3.3 also, and, did your default internet connections remain after flashing?
great stuff guys, you rock!
@jokinawa
When I Say Merged What I Mean Is I Use The Shell Of An AKU 3.3 OS.nb File. None Of The AKU3.3 Code Remains Its Just A Container For The Orange Rom To Live In. When You Flash It You Only Flash The Orange Part, Yes All My Settings Are Now The Original Orange Settings Whithout Having To Add Anything.
I Hope That Explains Things Better. I Added This Info To The Wiki.
Are There Any Other Providers Who Haven't Released An Original ROM? I May Create Installers If You Need Them.
Cheers
mousey_ said:
@jokinawa
When I Say Merged What I Mean Is I Use The Shell Of An AKU 3.3 OS.nb File. None Of The AKU3.3 Code Remains Its Just A Container For The Orange Rom To Live In. When You Flash It You Only Flash The Orange Part, Yes All My Settings Are Now The Original Orange Settings Whithout Having To Add Anything.
I Hope That Explains Things Better. I Added This Info To The Wiki.
Are There Any Other Providers Who Haven't Released An Original ROM? I May Create Installers If You Need Them.
Cheers
Click to expand...
Click to collapse
If I understand it correct... then this is great...
Does this solution mean that if I upgrade to xda live, i can get back to the original rom??
Does it mean that i can claim my waranty if the phone is broken (not software only hardware?)
T-mobile Netherlands did not bring out any ROM for the Tytn (VarioII)
What can I do to bring the ROM files to you?
-------------------------------------------------------------------
Sorry for the very very bad english... I speak Dutch!
I've Backed Up All The Hermes FTP Folder, But Sadly I Don't See A T-Mobile Netherland Dump, Theres 2 WWE Ones In There If You Want I'll Create An Installer Out Of That For You.
Cheers
smarty77 said:
If I understand it correct... then this is great...
Does this solution mean that if I upgrade to xda live, i can get back to the original rom??
Does it mean that i can claim my waranty if the phone is broken (not software only hardware?)
T-mobile Netherlands did not bring out any ROM for the Tytn (VarioII)
What can I do to bring the ROM files to you?
-------------------------------------------------------------------
Sorry for the very very bad english... I speak Dutch!
Click to expand...
Click to collapse
if you dumped the OS from your Hermes onto your hard-drive, then yes.
also, as I said before... remember to use as large an OS.nb as possible.
Currently I'm looking into modifying the size of the OS.nb itself; hopefully this can be done without generating any bad blocks (even if the attempt fails), but I'll get back to you on that.
Offtopic, but mousey_, why are you upper casing all words in your messages?
Olipro - superb work, keep it up, but get some sleep too!
V
Sleep? What's that?
... wait ...
Oh, I remember now...
Man I really miss it!
ViJay, why are you so cruel as to remind of of such a thing?
vijay555 said:
Offtopic, but mousey_, why are you upper casing all words in your messages?
Olipro - superb work, keep it up, but get some sleep too!
V
Click to expand...
Click to collapse
mousey_ said:
All Working Beautifully.
I Took The Part02.raw Of A Dumped ROM And Dumped All The Files Using "viewimgfs" from the imgfsTools
Then I Created imgfs_raw_data.bin From The Dumped Files Using "buildimgfs" from the imgfsTools.
I Copied An OS.nb From The AKU 3.3 Test ROMs Into The Folder Then I Merged My imgfs_raw_data.bin With The OS.nb File Using "aWaiter".
Then I Created The nbh File Using The Orange Splash Screens And The Romanian EXTROM And Added It To The CustomRUUUpdater.
And Then Flashed It. Now I've Unlocked The ExtRom Im Going To Add In The UK Files And HardReset.
Links To The Installer
Torrent - http://www.mininova.org/tor/608219
Megaupload - http://www.megaupload.com/?d=V2JTBWSZ
Cheers
Click to expand...
Click to collapse
how you create the nbh file?
I Used dutty's nbhtool To Create The nbh File.
Cheers
ok mate thanks a lot.but i have another problem.when i use the command BuildImgfs i get this windows xp message :"BuildImgfs.exe has encountered a problem and needs to close. we are sorry for the inconvenience", and i can t continue the proccess.what the f..ck is wrong?
i must say that you are amazing.you did the unexpected:you gave life to dumped roms.WAY TO GO MATE....
thanks in advance.
Im Having The Same Problem. And I Can't Find Out How To Fix It. When I Do I'll Let You Know.
What Dumped Rom Are You Using?
Cheers
rom dump..
Ok I'm going to dump my rom... can someone tell me, when I dump my ROM is it important to empty my device (hard reset??)... I dont wanna throw my private data on the streets
Or does the rom dumper only dump the rom and dont touch the active part of the device?
I have dumped my ROM and now??
I did the rom dump before i did the upgrade to xda live 2
Olipro can you help me to create a dutch T-mobile recover ROM?
I do not really know how that works (Instructions would be nice!), but as far as i understand that, you can read out the rom from the Hermes to do a backup eg. for XDALive?
T-Mobile Germany even has no shipped rom! Would be nice to construct it!
has someone the german 02 stock rom/splash screens? with original spl and radio? need it for warranty.
Read the wiki may hazardous to ur health. But u will get what u want there.
now i need the original o2 boot screen. the o2 rom doesn't install the 02 bootscreen. now i have the information of the device during boot, then splash screen. but need the po2 bootscreen.
ndCChris said:
now i need the original o2 boot screen. the o2 rom doesn't install the 02 bootscreen. now i have the information of the device during boot, then splash screen. but need the po2 bootscreen.
Click to expand...
Click to collapse
Yes, me too. Anyone?
*Pushing up*
nobody want to share the o2 splash screen?
Is it possible to flash the Diamond Splash? Maybe we have more luck there....
I have a rom with the o2 bootsplash, only problem is it has Test Only. Not for Sale printed across it...
Hello
I would like to try some custom ROMs, but since my Touch Pro already had some problems with the stylus sensor, I don't want to lose the warranty. I dumped the ROM and splash screen, but I have some older SPL version -1.69.0000. Is there a way to extract SPL? I can't find it anywhere
Thanks in advance.
m2c said:
Hello
I would like to try some custom ROMs, but since my Touch Pro already had some problems with the stylus sensor, I don't want to lose the warranty. I dumped the ROM and splash screen, but I have some older SPL version -1.69.0000. Is there a way to extract SPL? I can't find it anywhere
Thanks in advance.
Click to expand...
Click to collapse
You will have to get the shipped ROM by your carrier and dump the SPL from there. You can't dump your SPL from the Image on your device.
Thanks
Dave
If you will find some solution, please post it here
I have the same problem. Thanks
It would be helpfull if you mentioned your carrier and whether its a TP or fuze. Its easy to get the spl if you know which rom came on the device.
its mda vario iv (branded htc by t-mobile).
i've found something:
Code:
SPL dump for raphael:
pmemdump 0x88000000 0x80000 spl.bin
Will be this useful? Or is there any other way?
dewil9 said:
its mda vario iv (branded htc by t-mobile).
i've found something:
Code:
SPL dump for raphael:
pmemdump 0x88000000 0x80000 spl.bin
Will be this useful? Or is there any other way?
Click to expand...
Click to collapse
jcespi2005 said:
The reconstruction process can be done only for the OS part...
You can't extract the radio or SPL from the device, you need a shipped ROM to get this two parts.
Cheers.
Click to expand...
Click to collapse
You can only get spl if there is a shipped version of that rom.
Open about in settings and tell me what it says. Then hold down volume and reset. It will bring up the tricolor screen. Post what both of them say.
aruppenthal said:
There should be a way if there is a shipped version of that rom.
Open about in settings and tell me what it says. Then hold down volume and reset. It will bring up the tricolor screen. Post what both of them say. I need to be sure to get the right one.
Click to expand...
Click to collapse
EDIT:
@dewil9
Actually, what SPL are you after?
Ta
Dave
Open about in settings and tell me what it says. Then hold down volume and reset. It will bring up the tricolor screen. Post what both of them say.
Click to expand...
Click to collapse
about:
CE OS 5.2.19965 (Build 19965.1.2.3)
tricolor screen:
RAPH300
SPL-1.69.0000
MicroP-Herm (LED) v 13
MicroP-Herm (KEY) v5
PSOC-Herm STAGE_CVT v0x35
dewil9 said:
about:
CE OS 5.2.19965 (Build 19965.1.2.3)
tricolor screen:
RAPH300
SPL-1.69.0000
MicroP-Herm (LED) v 13
MicroP-Herm (KEY) v5
PSOC-Herm STAGE_CVT v0x35
Click to expand...
Click to collapse
There is a German T-Mobile ROM on the Wiki with 1.69 as the version. Download it and use NBHExtract to Dump the SPL from it.
Ta
Dave
I am from Slovakia, and language of whole OS is english.
Is it ok?
dewil9 said:
I am from Slovakia, and language of whole OS is english.
Is it ok?
Click to expand...
Click to collapse
No, it doesn't matter Raphael SPL 1.69 is the same from any country.
Ta
Dave
Thank you very much
DaveShaw said:
There is a German T-Mobile ROM on the Wiki with 1.69 as the version. Download it and use NBHExtract to Dump the SPL from it.
Ta
Dave
Click to expand...
Click to collapse
It appears the one in the wiki is a reconstruction and does not contain spl
You should be able to use HaRET to dump SPL from RAM at runtime. SPL is at physical address 0.
With RAM protection implemented in Diamond/Raphael/Kovsky/Blackstone it is quite unlikely that SPL in RAM will be different from SPL in NAND, however still possible. Since there's no SPL 1.69 in circulation, you can't verify how accurate the RAM dump is. Someone could dump a known SPL version this way and then confirm the files are identical when extracted from .nbh and dumped from RAM.
One more question... probably stupid one...
I downloaded this german rom, but I don't know howto extract spl from it.
I know with nbhextract, but how exactly?
Can somebody help me? Thank you
dewil9 said:
One more question... probably stupid one...
I downloaded this german rom, but I don't know howto extract spl from it.
I know with nbhextract, but how exactly?
Can somebody help me? Thank you
Click to expand...
Click to collapse
Is the one you extracted an official rom or the rebuild from the wiki?
The one in the wiki does not have the spl in it.
Ah I thought tha roms on wiki are shipped one...
So still no 1.69 spl??
Stock SPL 1.69.0000
For all guys looking for stock SPL 1.69.0000, here is one i have already extracted from czech T-Mobile ROM. So we have done one thing Another things to do is to make one single NBH file with stock SPL and one NBH file with OS, Splashes and stock Radio without SPL. That is what i have not understand yet very well, but i got kitchen and i want to flash new ROM early
Thanks for the SPL - same as on my UK T-Mobile Vario IV.
Now i can restore to factory settings - time to play!
Stock SPL not changing version numbers
I've tried searching the whole net already but I couldn't find it.
Something screwed in my screen and I want to turn it in for warrenty.
Now I restored my ROM/Radio already but when I try to restore Stock SPL (doing it when in USB mode) and it goes to 100% in a few secs it still says 1.90 Olinex.
Anyone got a solution for that?
Kind regards,
Kenny
Hi guys, it's me again
As some of you know, I've searched for the boot splash for the german XDA Star and finally, I succeeded with it! But before I can release the whole ROM package for the german XDA Star, I need some confirmation from users with the original firmware:
- is Radio 1.58.27.16 present on the phone? (Start -> Einstellungen -> System -> Geräteinformationen -> Funkempfängerversion)
- is "CE OS 5.2.1622 (Build 18128.0.4.4)" present in Start -> Einstellungen -> System -> Info?
- is 1.31 present as last red line during boot sequence?
- is SPL 1.16.0000 the real original XDA Star SPL*?
*: Soft reset your device while press and hold both Power and Camera button and you could see your SPL version!
I have asked for the Splash and nobody answer...
Here the Splash: (second is the original, first is the new one)
Thanks anyway, I'll see if them are the right ones after the Star is send back to o2!
Original Firmware is the best way
McLin said:
Original Firmware is the best way
Click to expand...
Click to collapse
Sure, but the linked ROM doesn't contain SPL, Radio or Splashscreens, only the OS itself so it's no help!
Hey anime... i've dumped my original o2 rom. Dont know if it contains anything you need (spl, splash) but if it helps you i'm gonna upload it.
But if you're allready done: what about uploading the "shipped" rom for all the other german o2 customers that have been (and will be) asking for the stock rom? Think there will be many grateful users over the next months...
dllngr said:
Hey anime... i've dumped my original o2 rom. Dont know if it contains anything you need (spl, splash) but if it helps you i'm gonna upload it.
But if you're allready done: what about uploading the "shipped" rom for all the other german o2 customers that have been (and will be) asking for the stock rom? Think there will be many grateful users over the next months...
Click to expand...
Click to collapse
Why not uploading? It's good enough for a try and if I'm successful with it, I can upload the whole ROM for all other!
i dropped you a pm
Got it, thanks!
It's harder than I thought to create a whole o2 ROMwith all parts (OS, Radio, SPL, SPlash)! Will need some more time to do that!
animelover said:
It's harder than I thought to create a whole o2 ROMwith all parts (OS, Radio, SPL, SPlash)! Will need some more time to do that!
Click to expand...
Click to collapse
Use KaiserChef from the Kaiser forum. It needs the raw and a basefile (any official Nike), and just rebuilds it from a couple of key presses.
or take splash tools, there is a createnbh.bat and it use the example.txt just write the nbh files in the text file put all nbh in the folder and press the bat...
Thanks for your help, the ROM is nearly finshed but I need some last infos! PLease read the first post and reply here with yes or no to each question!
Hi. Anybody have program, which could I backup whole ROM to my PC? I mean the *.nbh, and if will be here problem, i load it back.
Sorry for my english. I am Czech
I join the request.
I would like to get from phone the whole rom. There is a possibility?
If so, what program to use?
Hi Everybody,
i tested with jlp_svk to download ROM, but only in raw format. So we dump it, but i am afraid, we don't be able to restore it.
And so i read, without hardspl we cannot generate NBH and flash it back
PS: Me czech too
Backup rom
Hello,
l have the same problem, I want to backup/save my ROM before upgrade.
Someone can me tell how to do and how retore this backup ?
Thanks,
DjeDje_zr7
Raw file
Hello,
i have dump my HTC touch2 (mega). I have 4 .raw files (Part00.raw, Part01.raw, Part02.raw, Part03.raw).
How to convert them in .nbf file?
Thanks,
DjeDje_zr7
HTC Touch2 (ugly Orange rom)
djedje_zr7 said:
Hello,
i have dump my HTC touch2 (mega). I have 4 .raw files (Part00.raw, Part01.raw, Part02.raw, Part03.raw).
How to convert them in .nbf file?
Thanks,
DjeDje_zr7
HTC Touch2 (ugly Orange rom)
Click to expand...
Click to collapse
hi, I'm in the middle of the same process, i've found some infos here:
http://forum.xda-developers.com/showthread.php?t=337066
djedje_zr7 said:
Hello,
l have the same problem, I want to backup/save my ROM before upgrade.
Someone can me tell how to do and how retore this backup ?
Thanks,
DjeDje_zr7
Click to expand...
Click to collapse
You sold ,,before upgrade" . So it s any rom to upgrade? In czech: To uz je nejaka romka k upgradu? Thanx. Dik
midas1 said:
You sold ,,before upgrade" . So it s any rom to upgrade? In czech: To uz je nejaka romka k upgradu? Thanx. Dik
Click to expand...
Click to collapse
Sorry my english is very poor and I don't understand what you want to say me.
My issue is I have a HTC mega with operator (Orange) ROM and i want to save original ROM before install the official HTC ROM.
But I to be able to the restore the operator ROM in case I should return it to the operator.
Regards,
DjeDje_zr7
It's a bit late......but you can use attached....
Now including attachement....
How to use it?
Would you please kindly say something briefly about how to use the software?
Thanks in advance!
How to use it?
Frank Caarls said:
Now including attachement....
Click to expand...
Click to collapse
Please give a help hand, thank you!
how to dump
1. connect Mega via USB (activesync)
2. run Partition.Addresses.bat and look at Partition.Addresses.txt
3. change in Dump My Phone.bat what partition do you want to dump (delete "rem" on the start of row)
4. start Dump My Phone.bat and wait
or use this manual
http://forum.xda-developers.com/showthread.php?t=334680
Hi, I dumped 4 RAW files.
What next? How to flash it back? How flash new rom?
Can someone make Sticky to how to backup and flash rom?
I know, there are many treads on xda, but for other devices.
Can someone shortly explain how backup original rom and how to wlash new/backed?
i have the same problem, i have dumped raw files, but reconstruction did not work. I take original WWE Rom and in kitchen change imgs part, but i dont know how....
Ervius Visual Kitchen has a feature called RAW2NBH under extra. I have tried it, it is building the nbh file but I do not know if that nbh is ok or not.
Just shared with you what I have found. Flash it at your own risk.
How to reconstruct your ROM
http://forum.xda-developers.com/showthread.php?t=664499
Addicted2xda said:
Ervius Visual Kitchen has a feature called RAW2NBH under extra. I have tried it, it is building the nbh file but I do not know if that nbh is ok or not.
Just shared with you what I have found. Flash it at your own risk.
Click to expand...
Click to collapse
Hi, guys. I just used the raw2nbh to merge my raws (part01, part02) which was backed up from a chinaunicom customized diamond. And when I flashed the Ruu_signed.nbh into my diamond (customized by cmcc), It stoped at the first step. Anyone know why ? Just becuase the payload is small so as not to contain the imgfs and the xip ?
Many thanks.
So this program for back up if i get it right ?
Sdivleli said:
So this program for back up if i get it right ?
Click to expand...
Click to collapse
This is for backup your original, stock rom. ONLY ROM!
Not for backup datas....
After reflash the reconstructed rom, you will get a clean device, like after hard-reset.