After I upgrade to WM 2003se My USB modem is not working even I start USB modem and detect hardware but not detect any new hardware found.
Help me how to start USB modem in my XDAII with WM2003se.
:lol:
it's working ok with me on SE, but I usually turn the wmodem on before connecting it to the cradle.
Related
Please Help
I am trying to use the Rikaline 6010 GPS Receiver with O2 XDA PDA/Phone
Rom Version 3.17.03 ENG
Radio 4.21.00
I have sucessfully installed the USB drivers and tools. When I run comno.exe the PAD reports the COM port for the driver is 4. However if I run the test.exe and attempt to open port 4 it fails.
I have disabled Infared beams on the PDA. I have also done hard reset on the PDA removing all other software. In just installed the drivers.
All other GPS software fail to open PORT 4. Your help would be greatly appreciated.
Regards Richard
Problem solved. The GPS receiver does not require drivers..........
I have bought a Wallaby QTek 1010, but without a drivers/software CD. Please help me: what do I need to install on my pc, to connect to my Wallaby (what software? what drivers?) And where can I download it?
(I did have searched the internet, but couldn't find enything )
1.) ActiveSync
2.) directly from Microsoft for free
Stefan
Thanx! ...off to try it out!
software
Hi i have a 1010 and have upgraded to w2003 from LumpiStefans rom kitchen, hasn't missed abeat since, so you may want to flash your rom and update.
Peace
Just downloaded ActiveSync on the Evil Empire's site, plugged the USB cord directly to my Qtek 1010 and the other end to the PC's USB port, still can't detect it!?
Bad cord?
Do I need the cradle?
I only have the unit and the charger, that's it.
HELP!
Are you using the correct USB-Cable?
Is it designed for the XDA?
Which ROM Version dou you have on your device?
Have you configured ActiveSync on your PC for USB Connection?
Stefan
I was doing rom upgrade my MDA for WM2005 but during the rom upgrade my MDA's usb cable was plug out and connection lost. Now my MDA don't open and don't connect with computer because I start rom upgrade program (Hima Upgrade UT) it wrote ERROR101:CONNECTION ERROR . I did hard reset several times but didn't change anything.Please help me how will I solve this problem
Hi - i tried to update my xda2 (Himalaya) to the uk o2 rom from the installed uk vodafone rom. but it we bellys up. now all i get is a screen showing me serial v1.06 and then when i dock it onto the cradle it shows usb v1.06 (which i have been tols is the bootloader screen -but i am not sure as the xda1 bootloader screen sayd bootloader on it).
I have tried running the rom update again but have had no luck - the computer does not recognise the device - as it says there is no drivers for it (although i have activesync installed) - but was like that since i bought it - just been using bluetooth to install programs.
When i had a xda1 i had the same problem when changing roms and was able to fix the problem by making an sd image using OS IMAGE TOOL. But this program says 'unsupported file format' when i try to make an os image of the nbf files (nk.nbf, ms_.nbf, Radio_.nbf) to my sdcard.
Does ne one know how to make an os image of the .nbf files so i can put them onto my sd card and try and resolve the problem.
any other ideas welcome and much appreciated
thanks steve
much of what you seem unsure of is describet here
http://wiki.xda-developers.com/index.php?pagename=HimalayaBootloader
http://wiki.xda-developers.com/index.php?pagename=HimalayaHowtoCopyRom
like this
"you can connect to the bootloader, either via a serial cable, and use a terminal program like hyperterm. or via usb, and use mtty. make sure you have disabled the serial or usb connection in activesync, before trying to connect to the bootloader."
'usb port cannot open'
tried mitty just gives me 'usb port cannot open' although i have my xda2 in the cradle and pluged into my usb port. when i connect to the usb port it comes up on my screen - new hardware found - no drivers found - and keep popin up as if the xda2 was found then disapears then found. although i installed the drivers when i installed activesync (have both serial and usb turned off in active sync).
have rom upgrade from o2 and extracted the .nbf files
ms_.nbf
nk.nbf
radio_.nbf
is there a way to put them on an sd card so i can put it in the xda2 and boot from that??
not that i know of
my pc always found some ms driver thingy
when i connected my pda in bootloader mode
not sure if it took it off the internet when it found the device
or if i got it with activesync
i think the problem with my computer recognising the xda2 might be down to the cradle, as from i bought it, i have always had problems charging it - depending on what way it is sittin on the cradle. i have purchased a new usb to xda2 lead and hope this will help with this problem.
I couldn't manage to get my Prophet with the WM6.1 Shadow 2.0 TE acting as a Modem.
Is there any driver for XP or Vista to connect to our recently upgraded tool and use the GPRS connection? (USB or Bluetooth).
Thanks in advance.