I have problem with my XDA O2, the device always hang when i actived irda, it's very anoying me until now i can't use my irda port,is it a problem with the hardware or software, coz when i reInstall the ROM there is no effect,please if anyone can help me with my problem,and thanks before
Related
After upgrading to ROMKitchen 3.17, the infrared port has stopped working. It does not send or receive anything. Why could it happen? It was working very well before upgrading. If any application that involves IR, that is beam file, ActiveSync by IR causes the XDA to hang. IR Receive gives message "Unable to establish an infrared connection while mobile device is connected to the desktop"
"Unable to establish an infrared connection while mobile device is connected to the desktop"
Click to expand...
Click to collapse
Dear,
I had a similar problem once and for long until I realized that some of my other softwares were interfering with the IR Port. If you have any software that requires all-time active connectivity status of any kind (i.e. keyboard driver), disable it before using the infrared.
HTH
Dear Ken,
I guess that is where I went wrong! There was a foldable keyboard software that was creating problem!
Thanks
I have similar problem with AT&T PPC2002 (XDA developers Special Edition ROM v1.2). The phone was bought with this ROM, so I didn’t try with other versions.
When I run ‘infrared receive’ application or try to beam any file my phone simply hung till I soft-reset it. It may be the conflict with other programs but I not sure. How to check who else uses IRDA and how to remove those programs/conflicts?
Help please and thanks in advance
Please tell me how did you end the problem because it seems that i have the same thing with my XDA II
I wish I could end up with this problem... but I still not. It does not vitally critical since I don’t need IRDA functionality so far. But having feature (IRDA) and knowing it does not work for unknown reason driving me mad. PROBLEM STILL EXISTS AND I HAVE NO CLUE WHAT TO DO.
I have a big problem. I need conect my XDA with GPS. My ROM is 4.01.16 US. But when I start my GPS program, I see mesage, that COM1 port is in use by another application. If I reset my XDA problem is same. Under PPC 2002 (ROM O2) it worked without problem. But I would like use this under WM 2003. Can you help me, please ???
Sajfi
PS. Sorry for my bad English, but I hope, that will you understand me ...
Turn off the IR port on setting .
Sebi said:
Turn off the IR port on setting .
Click to expand...
Click to collapse
Thank you very much !!! Now it work correctly !!!
Turn off the IR port on setting .
How you do this? There is only a under beams "receiev all incoming beams". Or where is an other place?
Uncheck the receive all incoming beams, that will release com1 for the other application.
Hello
Last night I tried to configure my phone settings..
But my problem now is that my phone dosnt function anymore.
It says it has "no service"
does anybody know how to solve this problem?
thanks in advance...
gidstar
My phone dont'n work & I don't see a Radio version
I can't help you, sorry, only to cry with you: HELP :evil:
I need help too, I speak just a little English and German, I live in Germany.
My XDA can't show the Telephone and it has no comunication/radio/radio version. Moreover, before this (it cames from yesterday) I had a lot of problems with the energy and all days the XDA had lost the configuration; xda uk in place xda de. Why?? So I restarted with this option to starten/charge this elected configuration, and so it asked me my PIN, another time restarted and so the green light was activate, but some hours later, with or without electric.
So, iniatilly energy/charge problems and some times with the Telephone and configuration, now no telephone, not radio version... I think today my XDA could exploted!
:twisted:
Another question, my mother lenguages are Spanish and Valencian/Catalan, and when it was possible I wanted to change my lenguage to spanish and to get a modern rom version (actuell 3.14.16 GER, from 10/11/02).
Thanks.
Gidstar, have you been messing with the bandswitch tool, if you have changed the band to 900/1900 and you use an 1800 network you will get no service, you need to change it back to 900/1800 if that is the case.
Hello, recently i have changed the touchscreen of this x10i. The new one works correctly, but when the phone is locked, the touchscreen stops working, and only works after removing the battery. What can it be? Can it be a software issue? Im using stock android 2.3.3, clean install..
Can it be a driver related issue? I guess the phone receives the signal to turn off the touch, but it doesnt receive it to turn on. I would take a log, but im a noob a it. If anyone could help me.. Cheers
Anyone?
Sent from my Galaxy Nexus using xda app-developers app
Com.Android not working, l g keyboard not working, settings ,
Phone, contacts not working, thus I am not able to %run on u.s. b debugging to flaw or any other until to remedy problem , please inform me of any possible work around,
XDA Visitor said:
Com.Android not working, l g keyboard not working, settings ,
Phone, contacts not working, thus I am not able to %run on u.s. b debugging to flaw or any other until to remedy problem , please inform me of any possible work around,
Click to expand...
Click to collapse
Hi,
Kindly register yourself at XDA post which you can query in http://forum.xda-developers.com/t/lg-k7
Experts there may be able to help you