I m on 1.02 now, so upgrade it will that become 1.06?
just 1 files? nk.nbf , where is the other 2 files? (FTP)
any major or small problems with the win2005 now?
Can I downgrade back to Win2k3SE later?
Thank you
Related
how can I flash only my radio stack? mine is 1.06. I want to upgrade it to 1.14. I already have the nbf file from iMate 1.72.162.
Thx alot.
Hi All,
please help me. I yesterday have only MDA1 and for flashing need to files RUU and RSU. And now i have (tomorow) new MDA2 and search new best FW for it. I hve only RUU172126WWE_imate.exe and no radio. Is need radio too? Or is all in one file (RUU172126WWE_imate.exe )? Where i can downaload new fw and radio? And best aplication for it. Meny fnx for reply and help.
arrgh...
in the exe everything is included... rom, ext-rom and radio...
Have fun
meny fnx. and is posible kitchen rom for new MDA2 or only for MDA1? Is posible, where? And Best of img for MDA is? And Where can I download?
Sorry for my very bad english.
There is no kitchen for XDA II ... you can modify the ext-rom as you need.
there are many posts here... but none answers the question of the topicstarter?
I have the same question. Is it possible to update only the radio stack and leave the rom and extended rom alone?
And if it is possible, will the update work without a cold reset?
thanks for your answers
calvin
radio stack only
yes you can upgrade the radio stack only. open the ROM upgrade with the radio stack you eant by unzipping it NOT running it. after unzipped, delete both the other nbf diles and leave only the radio stack nbf file in the directory. run himalaya upgrade from that directory. the first upgrade screen will tell you the radio version being replaced and not indicate any upgrade for the other two..
i have done this successfullly by leaving 1.72 alone and switching between 1.10, 1.12 and 1.14 radio stacks. a cold reboot is required, but a sprite backup of the 1.72 system with a 1.10 radio stack worked fine after restore to the 1.72 system with the 1.14 radio.
hope this helps.
steve
hey... anyone know where I may be able to get an imate 1.60 ROM from? Especially some of the older radio rom's... having no end of problems with 1.72/1.14..
@watchdogsdg
thanks for your helpful reply, I will try to update my radio stack.
And please give me instalation instrukcion for good fleash all and modify my rom. I can put to rom ICQ, NetFront, TotalComander, JpegView, MP3, Divx, ... And please give mi link for download all whot i need. And meny soft and games and Czech leng for XDA2. Meny meny fnx.
Sorry form my junior question.
Hello,
I am looking for the latest Rom update For my Qtec 2020.
I Currently have 1.66 WWE
I need 1.72 WWE
Etended Rom 1.72.800 (i think)
And radio version 1.17 or later.
Can someone help me to upgrade my Hymalaya ?
Where Can I get these Files ?
So it is without Provider !
Thanx in advance.
The provider specific bits are in the ExtRom.
So in fact you can use any 1.72.00 upgrade file and delete the ms_.nbf file before proceding.
Afterwards you can fill your Extended Rom with the applications you want using the Extended Rom Unlock tools.
BTW: This is always a better solution because using a 'wrong' ExtRom could get you into CountryID trouble with the next upgrade.
There are numerous posts with 1.72.00 rom upgrades in it, but I :lol: would recomend my RUU172902WWE upgrade. It is documented what the files in the ExtRom all do, so its simple to skip the operator specific ones.
1.72WWE
Hello,
I have trouble finding the Rom you describe.
Do you have a download link for me ?
Thanx
This is the thread:
http://forum.xda-developers.com/viewtopic.php?t=11781&highlight=ruu1729*
I have upgraded with http://www.qtek.nu/files/RUU172752WWE.zip and it works fine. However do not forget to first backup and then Hard reset the device before upgrading
I want to go back to using WM2003 SE, is there ne way I could do that from WM2005 on my O2 Xda ll...???? urgent help required .....!!!!
Me too, I am would like to downgrade my Charmer (MDA2, Qtek S110) from the wm2005 to wm2003 (I want to load the wm2003 rom of my old MDA 1, Qtek S100);
Please, help us ??
It's been a while since I sold my XDA 2, but when I downgraded from the beta of WM5 all I remember doing was reflashing with my favourite ROM. Which ROM version were you looking to go back to? Chances are it will be on the ftp.
In fact, I need to know how I can remove my Charmer MDA2 Wm5 ROM, and replace it by my magician MDA1 Wm3 ROM ?
is it posible ? which procedure ?
thanks
Hi There
I'm now running the original but updatet T-Mobile version but i'd like to upgrade to WM6. unless it's her in german i'd like to have a possibility to downgrade again!
Can i just flash the old t-mobile files if i'm mad of rading english all day long??
Or will i need special rom to reflash WM5??
YOur's
Seppel
you can downgrade to whatever WM5 rom you like.
Cheers,
vlodeck.
Downgradeing problem
I'm now in TouchFlo 2.1 and i want back to wm 5.0 but i try the two uk rom,s and i get errors like ,you can't run this nbf ,try a newer one or update utility not for this device.What should i do???
cody28 said:
I'm now in TouchFlo 2.1 and i want back to wm 5.0 but i try the two uk rom,s and i get errors like ,you can't run this nbf ,try a newer one or update utility not for this device.What should i do???
Click to expand...
Click to collapse
I used the german AKU3.3 ROM and it showed 'Upgrade from V4.0.0.0 to V3.3.0.0'.
Maybe you have used an old AKU2.x ROM to downgrade?
And... try downgrading in bootloader mode (hold tape button while soft-reset until colored bars are shown, but you need different active-sync drivers for bootloader mode)
downgade problem
I succed to downdrade to germab t-mobile rom but i need a wwe rom ,i'm not familiar with german language,and the uk roms just don,t work .update error.
Once you upgraded to AKU 3.3 you cant go back to AKU2. The only thing that could help is flashing the prophet rom but it can be dangerous. Search the prophet section if you want to do it.
Hi vlodeck
I upgraded already to aku3, but i would like to upgrade to wm6
do you know a good way to do so ?
downgrading to aku2 does not work - as you said!
regards
use
BootLoader.exe anywhere (ïîìîåìó) Forum
hmm ... didn´t find a description what to do, but tried to downgrade back to orginal aku2 in bootloader mode:
ERROR [296] : UPGRADE ONLY
This NBF file cannot be used for your PDA Phone. Please get newer NBF file.
How to downgrade 38221_382116_026921_TMO_UK_WWE_Ship
(SPL 3.08.0001) back to orginal 1120223_11202110_11220_T-MobileUK_Ship ?
Dear all,
I was upgraded my Prophet to WM6 b4 version,
and I want to downgrade my phone to WM5 Asia version now.
But the process is terminated at 95%.
I think that there maybe SPL version problem. The version number of SPL is 2.15.0000 before, and now is 2.20.0000
Is it possible to making a custom asia rom (nk.nbf) with SPL version 2.20.0000 by myself?
Anybody can tell me how to getting start and what's the tool I need to have?
Thank you very very much and sorry for pool english.