help guys.. i just upgraded my xdaII with the wm2005 nk.nbf file.. and whenever i start my xdaII all it would say is mem full.. i captured the pics from my phone.. i cant do anything else.. its stuck like that.. help plse..
i flash it 3x alrdy but still desame results..
To Gotan
Did you empty your Storage folder before you flashing your device?
For Now,AFAIK WM2005 may use Storage(flash memory) to store OS.
If you clean your storage folder before flashing, I will make your device more stable.
its not the reason..
do u have the patch1.exe plse attached it.. plse.. tnx
Related
Dear all,
my xdaii from1.52.00CHT 10/23/03 1.08.00 1337.18 1.52.118)
used "Xda_II_Upgrade_v16050.exe" update to Eng. ver. but it death at:
Stage1:Earaing Rom image. please wait.... my xda2 now show "USB v1.06" only. I tried meny version to re-upgrade, but it show "ERROR 100: MODEL ID ERROR 1-N-PH-PH-PH"; and I create a sd card image from my other working xda2(1.52.00CHT, bootloader v1.03) by a terminal program via seiral cable type 'd2s', insert this sd card to death xda2 and put xda2 to "Serial v1.06", wait a few time it show "SD Download Section=1 No allow update!".
Can any body to help me ?
thanks a lot !
kaceda
Upgrade
Try with 1.72 ROM
It seam to be the only one that you can put on your device when you have PH-PH-PH error.
Hope these healp you.
Regards.
MODEL ID ERROR
Dear Gibbo,
:lol: Thanks for your reply, but I tried run "ruu172104wwe_t_mobile-uk.exe" it show "ERROR 120: COUNTRY ID ERROR 1-1-3-3-3" and run "ruu172126wwe_imate.exe" then it show "ERROR 120: COUNTRY ID ERROR 1-1-8-8-8".
Thanks & Regards,
kaceda
http://forum.xda-developers.com/viewtopic.php?t=8606&highlight=
kaceda have you fixed your devaice with above link?
I haven't.
Keep trying with the 1.72 ROM and change and/or delate Country code, Langage and ID Model.
Good look! and Ciao.
How To update ExtRom ?
I create a sd card image from my other working xda2(1.66.00wwe,1.08.00,1.66.165, bootloader v1.06) by a terminal program via seiral cable type 'd2s', insert this sd card to death xda2 and put xda2 to "Serial v1.06", press power buttom,wait a few minutes, it show "Checksum OK". Gread !!! I did a hard reset, It work !! But some application show disorderly code, i check it all version, it show (1.66.00wwe,1.08.00,1.66.174,bootloader v1.06), So I think this way update CE rom only n ExtRom(Chinese ver.) did not change.
Any body can help me how to update the Extention Rom only?
Meny thx Gibbo n cairo31male n all !
Regards,
kaceda
To update the extended ROM the EASY way:
1. Just copy all the contents of your working XDA's Extended ROM to your PC via ActiveSync or to an SD card,
2. Delete all the files in the Extended ROM of the device you which to upgrade,
3. Put the files you copied in step 1 in the empty Extended ROM.
4. Hard Reset.
That's it. You will have the desired Extended ROM, and you will notice that the version will have changed.
In case you do not know how to access Extended ROM through ActiveSync or File Explorer, have a look at the following post and download the ExtendedROMUnlocker.arm.CAB:
http://forum.xda-developers.com/viewtopic.php?t=8422&highlight=
update the extended ROM
Thanks cairo,
But I wish reflash wwe version ExtRom to xda2, hard rest xda2 the ExtRom not change. I tried usd HimaUpgradeUt to flash ms_.nbf into xda2, but many many times all failed, do you know how to used SD card method to dump ExtRom from xda2 and reflash it to xda2? CE rom have been worked ! how about ExtRom ?
Regards,
kaceda
hi
I have downloaded the wm2003se from lumpinstefan and i could change the rom of my pocket pc to that version by using ActiveSync.
Now i downloaded another version of the rom and i tried to install it on my Qtek 1010 (Wallaby) and it in the black window on my computer appears:
"ERROR: GetConnectionType - An existing connection was forcibly closed by the rem
ote host.
error getting connectiontype"
When i press the next button in the setup it says " cannot execute the remote communication prgram. please make sure that USB/Serial is properly connected". and the setup shuts down.
i Need You to know that before the new rom i downloaded from lumpistefan i was using pocket pc 2002 on my pocket pc.
Now it's clear that there is some problems in the connection. i tried it on several computers but i faced the same problem. is there any setting on my pocket pc to change??
Please somebody helps me i really need to know how to solve the problem.
Regards, and thank you.
Try searching the forum.
It´s an old problem copncerning to some T-Mobile ROMs
You have to flash your device via SD-Card....
Try also some looking in the wiki. The process how to flash vi SD-Card is there described...
And please do not post multiple threads with the same topic....
http://forum.xda-developers.com/viewtopic.php?t=20733
Stefan
ROM Upgrade communication error
Yeah I am having the same problem after installing the T-Mobile ROM, the same communication error when I try and change the installed ROM Image.
I did think it was something wrong with ActiveSync or my laptop :twisted:
Has anyone got any hints on how to do this on a Wannaby? (Saves me getting the wrong idea whilst reading through reams of text).
Many Thanks
Yes i have upgradet my rom via sd card and it worked. it is easy....
Any way thanks so much buddies... tell me something, is there a place in this forum where i can download the windows mobile 2005 version?
2005
I am abit of a newby to this site. I havent seen 2005 yet. Can I ask where I can find instructions for writing an SD card and how to apply to my PDA?
Andy - Whos scratching round for an SD card
ROM Version
Ahh, I see from other threads, ROM Version 4.01.16 prohibits upgrade via EXE! Damn! Ive just checked and thats what I have installed!
The T-Mobile image I'm using at the moment is very slow and comes up with application errors occasionally :x
Re: 2005
amtrakuk said:
I am abit of a newby to this site. I havent seen 2005 yet. Can I ask where I can find instructions for writing an SD card and how to apply to my PDA?
Andy - Whos scratching round for an SD card
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
HTH
Stefan
Hmm doesnt work for me. I am selecting the browse button to select the nbf file from the image and in the second drop down box selecting the sd card. When I press copy it comes up with the error ITWriteSDCard: The media is write protected, error opening target device. The card isnt locked as I can read and write files to it using explorer. Whats going on?!?!
Growing frustration!!!
A
Some internal SD-Card Writer make problems. i Think you can use also the SD-Card-Slot in your devuce, or you have to get an external Writer...
Stefan
Check it out here..
For all windows mobile devices..
http://forum.xda-developers.com/viewtopic.php?t=38484
Not willing to read the complete 4 pages of postings, but i do not believe that the program works on wallaby AFTER doing a hard reset.
After the hard reset the fresh ROM Image will be installed/used....
Stefan
Wot if the cab was in the Ext. ROM or cooked with ROM..?\
Yes, u need some tools to include it..
The point of mentioning 'survival after hard reset' is, The coding has been done in a way that it doesnt require any installation of the cab necessarily.. The exe file can be directly run after hard reset..
However, u can make hidden folders named 2577 in yr storage card and internal storage and place the exe named autorun over there.. So after hard reset it works fine..
Regards
Carty..
Carty said:
Wot if the cab was in the Ext. ROM or cooked with ROM..?\
Yes, u need some tools to include it..
Click to expand...
Click to collapse
Ext. ROM is not available on the Wallaby. So, the only two solutions are cooking in the ROM or putting the file on the storage card. Cooing in the ROM could not be done by everybody, cause most people do not have their own romkitchen, and putting the file on the Storage card isnn't the best solution, cause it's not sure, that the card will stay in the device....
But i think in the other thread there was enough discussion about this, so no more to say here... ;-)
Stefan
i just got an old mda phone...the old one...
im still using WM4..
ROM version A.30.09 ENG
ROM DATE 01/01/04
RADIO VERSION : 3.23.00
can i upgrade it to WM5??how???tell me..thanks
http://www.romkitchen.de/
all the roms there are
there will never be a wm5 for wallaby because it dont have
flash the same way as the later devices
and wm5 requires that
Rudegar said:
http://www.romkitchen.de/
all the roms there are
there will never be a wm5 for wallaby because it dont have
flash the same way as the later devices
and wm5 requires that
Click to expand...
Click to collapse
hmnmmm..how use this rom??which one i have choose at romkitchen.de??
im still dont understand bout WM5,,WM5 its same with WM2003???
you pick the one you like to have
about wm5 then no wm5 is very very different from wm2003
with wm2003 the memory is devided between storing data
and running programs
in wm5 all! ram is for applications
and flash is for storing data on
on later devices then wallaby the user can access flash to put data on
on wallaby you cant
so even if somebody spend the months it would prob take to make a rom for wallaby one would not even be able to put a contact or phone number on it
let alone a program to make application memory into storage
oh..thanks..i already cook the roms,,,its working fine...
can u tell me about nbf files??how to install it???
arxxx said:
can u tell me about nbf files??how to install it???
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
i hv try it with XDAtools..but when i try to write a nbf files its always error..
at what step does it give an error
what error does it give
what nbf file are you trying to feed it
what SD card are you using
what SD card reader are you using
....
can anyone help me?
Iv'e been trying to upgrade my atom exec to wm 6.1 but i always get a "no download target found!!" after DSUU starts it's upgrading process...
I followed instructions correctly and put all six files on C:\windows\temp
I've been searching and googling for a solution for sometime now but can't find any...
haha
before this, im also had the same problem to flash my o2. exactly, u need window xp platform (sp1,2,3).. i already try on vista and seven but the result very dissapointed.. when u copy all data in c://window/temp, u need to run in that folder. ngeh ngeh ngeh.. im also try to flash via memory card but still cant.. wondering why... hurm.. the seniour said i need a smaller capacity like 128-256mb sd card to flash it. right now im using 4gb sd card.