I finally succeeded to make the HP BT Stereo work with a i-Trek GPS and a Stowaway BT Keyboard. All of this with the widcomm 1.5.0.2000...But,....
no luck with a BT headset Bluetrek G2 it only works with the msBT stack...
It would be very appreciate if somebody could make a stackswitcher like the one which seems to be working with the widcomm 3500...
Is there any chance to get it somwhere ?
Thanks for somebody who can help me...
Re: stackswitcher required for HP BT Headphones + BTHeadset
newworld666 said:
I finally succeeded to make the HP BT Stereo work with a i-Trek GPS and a Stowaway BT Keyboard. All of this with the widcomm 1.5.0.2000...But,....
no luck with a BT headset Bluetrek G2 it only works with the msBT stack...
It would be very appreciate if somebody could make a stackswitcher like the one which seems to be working with the widcomm 3500...
Is there any chance to get it somwhere ?
Thanks for somebody who can help me...
Click to expand...
Click to collapse
heres the stackswitcher .. i only test it with broadcom build3500 and build 3900 under WM2003SE 2.06.00WWE but theoretically it should work with widcomm 2000
you will need to install the Buzz lightyear MS Bluetooth ICON (BL_BT_Icon_service.cab)but incase you want to use the MS Bluetooth Original Icon just ..
Heres how to set to original MS Bluetooth ICON
1. open the File Explorer
2. Goto this folder \Program Files\StackSwitcher
3. Then Run DefaultMSBT.exe
4. it will ask you to set to default MS Bluetooth Stack, just click OK
5. Then it will ask you to make a soft reset .. just click ok ..
Now if you want to change it back to Buzz_lightyear MS bt tray icon.. here it is
1. Open the Regedit(Start->Settings->System)
2. Goto This registry Section
HKEY_LOCAL_MACHINE\SOFTWARE
3. Change the value of MSBluetooth to
"BL_BTIcon.DLL"
4. then close the Regedit
5. Set the MS Bluetooth Stack only or Enable Both Stack (Start->Programs->Bluetooth Stack) then click ok to soft reset
or Simply installed again Stackswitcher.02.cab to change back to Buzz lightyear MS Bluetooth ICON the perform step 5 ..
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Thank you for the answer I let you know asap if it is working with widcomm 2000 and 1.72 rom. With 2003se I had many difficulties and it is not so stable for the headphones.
Re: stackswitcher required for HP BT Headphones + BTHeadset
toenailedheres said:
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Click to expand...
Click to collapse
)))))) yeah !!!
in case, you'll need some help, just let me know...
Make sure, you check this out as well:
http://forum.xda-developers.com/viewtopic.php?t=17476
)
buzz
newworld666 said:
Thank you for the answer I let you know asap if it is working with widcomm 2000 and 1.72 rom. With 2003se I had many difficulties and it is not so stable for the headphones.
Click to expand...
Click to collapse
hiya new..
i dont know if the stackswitcher will work in 1.72.rom since it is design for wm2003se .. anyway .. you can try it .. just make a backup first .. :wink:
Re: stackswitcher required for HP BT Headphones + BTHeadset
buzz_lightyear said:
toenailedheres said:
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Click to expand...
Click to collapse
)))))) yeah !!!
in case, you'll need some help, just let me know...
Make sure, you check this out as well:
http://forum.xda-developers.com/viewtopic.php?t=17476
)
buzz
Click to expand...
Click to collapse
yeah i love all your releases .. i mean all of it .. the bluetooth icon .. the skinned keyboard .. your marvelous switch it .. i love it .. and all your application is always part of my xda .. :wink:
n tnx for all of that ..
anyway i already posted my one tiny wishlist .. hope you can make it .. bro ..
Re: stackswitcher required for HP BT Headphones + BTHeadset
toenailed said:
buzz_lightyear said:
toenailedheres said:
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Click to expand...
Click to collapse
)))))) yeah !!!
in case, you'll need some help, just let me know...
Make sure, you check this out as well:
http://forum.xda-developers.com/viewtopic.php?t=17476
)
buzz
Click to expand...
Click to collapse
yeah i love all your releases .. i mean all of it .. the bluetooth icon .. the skinned keyboard .. your marvelous switch it .. i love it .. and all your application is always part of my xda .. :wink:
n tnx for all of that ..
anyway i already posted my one tiny wishlist .. hope you can make it .. bro ..
Click to expand...
Click to collapse
THANX man, that makes me really GLAD.. )))
maybe I should start selling that ****.. ))))))))
I have only very little free time at the moment, but I WILL take a look at the wishlist.
)
buzz
Thank you very much for the stackswitch now I can enjoy :
,with the widcom BT stack, some music with the HP BT Headphone while I am on Internet with the Stowaway BT Keyboard and mouse.
with the Ms BT stack I can use the Bluetrek G2 Headset for some phone call while Navigon 4 is leading me to the right place with the itrek BT GPS....
And I don't need any cables... what a joy...
Thanks
Re: stackswitcher required for HP BT Headphones + BTHeadset
buzz_lightyear said:
THANX man, that makes me really GLAD.. )))
Click to expand...
Click to collapse
ur welcome buzz .. just love you work .. n i think i will love your future releases .. :wink:
buzz_lightyear said:
maybe I should start selling that ****.. ))))))))
I have only very little free time at the moment, but I WILL take a look at the wishlist.
)
buzz
Click to expand...
Click to collapse
glad to hear that buzz .. i will just check everyday your thread and see for new update ..
tnx buzz ..
and more power to you buzz and all of your marvelous work and program ..
glad we have a buzz_lightyear in this forum .. tnx for everything .. man ..
newworld666 said:
Thank you very much for the stackswitch now I can enjoy :
,with the widcom BT stack, some music with the HP BT Headphone while I am on Internet with the Stowaway BT Keyboard and mouse.
with the Ms BT stack I can use the Bluetrek G2 Headset for some phone call while Navigon 4 is leading me to the right place with the itrek BT GPS....
And I don't need any cables... what a joy...
Thanks
Click to expand...
Click to collapse
ur welcome and glad i help .. so this means that .. the proggie works in 1.72 .. that was great..
Hi,
very interested. Where I can get Widcomm stack, which is working with switcher? please give me a link...
Sorry dind't write that it is only working with 2.06. I tried with 1.72 but no success so I changed to 2.06 and now it is working perfectly.
Thanks
I tryed it on 1.72 and its seems to work... but I don't know exactly - I charging my Headset at home and I am at work now...
So what do you exactly mean with that "don't working with 1.72"
please describe....
BTW: It seems that my device is slower? How that aplication works?
Mirek
I couldn't switch or make both stacks appear on the same time and just put one on and pair something with it.
With 2.06 rom I can stop the broadcomm stack and use the MS with a BT headset and a BT GPS and when I am in a train whithout ressint I stop the MS and then I can use the Broadcomm with a HP BT Headphone and a BT Keyboard and mouse.
Just the headphones doesn't work in any case with the MS stack and the Headset doesn't work with Broadcomm
newworld666 said:
I couldn't switch or make both stacks appear on the same time and just put one on and pair something with it.
Click to expand...
Click to collapse
I tryed this and its work on 1.72. I had both stack active. I must activate MS stack first, then Widcomm. I tryed to pair Headset with MS and Leadtek GPS with Widcomm and pairing was sucessful....
Yesterday, I tryed new Broadcom 1.6.0 b0600 stack and it may work with headset. in older version, when I tryed to pair headset, it paired with it, but if I tryed to connect it error follows.
In Broadcomm 1.6.0 I tryed to pair (sucess), connect (sucess), run Wm Player and headset icon was changed, my headset beeps. But thats all. The problem is, that there are some new registry settings in .reg file included in 1.6.0. I don't know, how to import .reg file in my XDA. PHM regedit has Import command disabled...
Do you know, how to import .reg file?
Mirek
I use Tascal Regedit. it is a freeware
http://www2r.biglobe.ne.jp/~tascal/download/down.cgi?tre090p
Related
This merged English version of WM2003SE is compiled for the Australian model O2 XDA II.
:!: NOTE: It is supplied as is. Use it at your own risk!!!
:idea: TIP: First backup your data and settings using either ActiveSync, SDBackup or XBackup - then download the attached ROM_Backup.zip - extract and follow the instructions in the ROM backup folder.
To install the merged WM2003SE:
1. Download the attached Setup.exe
2. Insert your O2 XDA II into it's USB cradle and confirm that a successful USB connection has been made with your PC
3. Run Setup.exe and follow the onscreen prompts.
Details:
The ROM image is based on version: 2.06.00WWE (ver 4.21.1088 build 14132)
The Radio image is version: 1.18.00
The Extended ROM image is a variance of version 2.06.100a (Sin.Merged.v1.0)
The Extended ROM contains the following:
Merge of ROM 2.02.t1WWE over ROM 2.06.00WWE, pre-configured with:
AltTab, Blackberry, Caller ID, Camera, ClearType Landscape, ClearType Tuner, ClearVue, CMD, Contacts, Explorer, ExtROM Tools, Flash, Fonts, IE Tools, IntelliDialer, Keyboard Extension, Midi Ringtone, MMS Composer, MS Reader, Notepad, O2 Customisations, Paint, Print, RegEdit, Reset, Rotate Screen, Run, Scheduled Tasks, Space Invaders, Task Manager, Tray Launch, Video MMS, WiFi & BT Headset/Handsfree Profiles.
The Autoconfig only contains support for the following Australian Carriers: - Optus, Telstra & Vodafone + "Not Listed - Set Manually"
KNOWN ISSUES:
Today Screen BT Profile Icon likes to play Hide'n'seek
BT HandsFree Mode may disable headset mic.
A choice of either HandsFree or Headset profile is now enabled, please select only one or the other.
NOTE: BT HandsFree Mode may disable headset mic
Uninstall "Version Sin.BT.Handsfree" from "Settings->Remove Programs" if necessary.
:arrow: INFO: New version is here!
Thanks very much Sin!
Been Looking forward to this SiN! Made my weekend!
Thank Sin for putting it together.
I originally Had and Orange SPV M1000, and upgraded it with the O2 1.72 version, in the hope that it would sort out the problems with Blue Tooth and Handsfree car kits, which it did not of course.
Thought I would try the rom from Mystery Man, which interestingly did not require any changes to the files to allow it to update, which also did not work the blue tooth, so I was going to try just updating the Radio to 1.18, but saw your new package pop up, so thought what the hell, give it a go, and now I am made up cos been very frustrated that it would not work in car kit.
The car kit I have is the Nokia CK-7W Blue tooth if this helps anyone else, I also assume it will work with the others, in particualr the built in ones in BMW's.
So thanks again everyone, I can sleep now.
Mark
Other known issues..
Thanks for the job SIN!
I have to point out a couple of issues I'm having since long, that seem related to the BT problem, but looks like no one else is having: "DUAL STEREO" sound in both (XDA II and Handsfree/headset) devices.
No matter BT headset is "enabled" or "disabled", the devices configured as "handsfree" are operational. Plus, my HBH 35 headset refuses to work unless configured as a handsfree device. After that, every handsfree device works in "STEREO" mode. Nice for multi part conferences, but annoying for your caller, who hears every tap on the XDA in your pocket, since the mic is operational no matter what.
I'm really the only one with this problem?
:?:
Hi Sin
Just a quick question, tried to change the splash1 & 2 images, to get away fro O2 image you put into file, but having probs with corrupted display if the image, howd you do it please, as I understand the normal method does not work with Chinese and Trial versions !
Many thanks in advance.
Mark
BTHFP
Does the headset mic work on handsfree profile Sin?
thanks Sin
I tried to modify the extended ROM to modify the provider list but couldn't found the autoconfig.txt, is it ok to create autoconfig and put it there? or did you merged the autoconfig inside Sin.Merged.v1.0.cab?
please let me know
thanks
Brumie
Re: Other known issues..
Looking Glass,
Your not the only one with this problem.
I have a bmw with bluetooth and it does the dual stero trick.
I have a Bluespoon Digital and it also does the dual stereo trick.
Has any one tried removing the head set profile and leaving just the hands free
Thanks
Jon
hai where can i download the attachment? i need to upgrade my xda2 urgently.. thanks.
Other Bluetooth Devices
Before I try out these new updates which sound fantasic, I am interetsed to know how this will effect my bluetooth GPS.
Currently I am using bluetooth tools to connect my GPS to my XDAII, does the new roms enhance bluetooth or should I still install bluetooth tools?
thanks.
Re: Other known issues..
"I have a bmw with bluetooth and it does the dual stero trick
Click to expand...
Click to collapse
I just tried the car again and it worked perfectly. So it looks like I only have the problem with the Bluespoon.
I'm pretty happy with the car working as that was what I really wanted.
Johnson..... you have to log in then you will find the attchments at the bottom of the first post in this thread.
Guest... I dont have a bluetooth GPS. Ive no idea if it works. I do know you cant get the Sandisk WiFi SD card to work which is a bummer.
Jon
ExtendedROM...
@ Sin,
This merge ROM version of yours, what is the most very important file that I need to keep on my extended_ROM? Last time I used your version without any problem But I need to remove some CAB file for my own customization. But now seems that ms_.nbf has only one file (Sin.Merged.v1.0.cab) which I think all the CAB file was in there.
Is it possible to gave us your merge CAB without the rest of installed program? Or is it okay to delete some CAB on extended_ROM after installation (cooked-own ROM style)?
Thanks!
Re: Other Bluetooth Devices
Anonymous said:
Before I try out these new updates which sound fantasic, I am interetsed to know how this will effect my bluetooth GPS.
Currently I am using bluetooth tools to connect my GPS to my XDAII, does the new roms enhance bluetooth or should I still install bluetooth tools?
thanks.
Click to expand...
Click to collapse
What ROM are you using now? I used to have 1.72 ROM and I need to used Bluetooth tools to be able to use both BT headset and BT GPS (Belkin/rebadge Fortuna Clip-on). BUT with ROM 2.06 (mysteryman), Sin.AU.v3.5(extended_ROM) and 2.02t1 Reg CABv3.cab (from henrylim). I am no longger needed bluetooth tools, it works without any issue.
file mentioned can be found here:
http://forum.xda-developers.com/viewtopic.php?t=13660&postdays=0&postorder=asc&start=50
Hope this help. I haven't tried Sin.merge.v1.0 yet but I will soon.
Re: Other known issues..
916senna said:
Looking Glass,
Your not the only one with this problem.
I have a bmw with bluetooth and it does the dual stero trick.
I have a Bluespoon Digital and it also does the dual stereo trick.
Has any one tried removing the head set profile and leaving just the hands free
Thanks
Jon
Click to expand...
Click to collapse
Nice to know, thanks for info, I was about to think no one else has the problem.
I've been experimenting during the weekend, and found that the problem remains quite the same: some headsets/handsfree only work if the HandsFree profile is selected, and then the "dual stereo" problem arises again.
By contrast, version 2.20 properly handles every "audio" device (at least my devices) but I haven't found how to made BT ActiveSync back to life. Plus the other known issues with the translation (May I help Buzz_lightyear?)
Resume: Excellent job by Sin (regards) but the whole BT thing is not yet fixed. I like his "new compact" Ext Rom, but since HandsFree profile is at this time more important to me than BT ActiveSync, I'm going back to 2.20.
Not there yet...
with WMP 10
in rom, with wmp 10 ?
Re: with WMP 10
bos_xda_II said:
in rom, with wmp 10 ?
Click to expand...
Click to collapse
Only 2.20 comes with wmp 10. Sin's rom has version 9.
Not there yet...
Re: Other Bluetooth Devices
Anonymous said:
Before I try out these new updates which sound fantasic, I am interetsed to know how this will effect my bluetooth GPS.
Currently I am using bluetooth tools to connect my GPS to my XDAII, does the new roms enhance bluetooth or should I still install bluetooth tools?
thanks.
Click to expand...
Click to collapse
I have a CoPilot Bluetooth GPS unit and it does not need Bluetooth Tools to get it to work via serial port emulation. I'm using 2.06 ROM.
With the BT GPS bonding, you get to say you want it to be a serial port but you don't get to specify what specific port number like with Bluetooth tools. This is not a problem with CoPilot software as it will FIND the serial port and baud rate in it's Bluetooth connection/configuration setup.
I also have a SanDisk SDIO WiFi card which also works fine (note the card is NOT the SDIO RAM+WiFi though!).
Re: Other known issues..
916senna said:
"I have a bmw with bluetooth and it does the dual stero trick
Click to expand...
Click to collapse
I just tried the car again and it worked perfectly. So it looks like I only have the problem with the Bluespoon.
I'm pretty happy with the car working as that was what I really wanted.
......
Jon
Click to expand...
Click to collapse
Hi again!
How exactly did you get to eliminate de "Dual stereo" effect in your carkit? I have too a HBH 35 headset and the problem remains on both of them.
This is my only complain, everything else works so well! And Sin made such a good job putting the Ext Rom together!
Thanks Sin for the easy to install ROM.. well done.
My Bluetooth GPS works fine, a bit of a change not having to select a port, but the port is displayed so that wasn't a problem.
My Logitech Headset refuses to work. It pairs with the XDAII but I am unable to iniate a call from the headset and the mic doesn't work.
The Bluetooth smybol is gone from the task bar too... probably something I did...
Is there a cab about that allows me to reinstall the bluetooth section just in case I stuffed somethign up?
Thanks.
Has anyone tried to configure the HP Bluetooth Headphones with their Himalaya running Windows Mobile 5.0? I don't know if WM5.0 includes the A2DP bluetooth profile. If not, how would I add this to my device? Thanks for any assistance!
Best,
Matt
same question!! isn't there anybody who tried wm5 with hp headset??
argh, there must be a way!!
argh magneto is superb, but without my headphones is only half that fun!
PLZ, PLZ find a solution!!!!!!!!!
cheers k
Hi Guys,
I have encountered the following problem.
When I first add my Supertooth II (car kit) to the ATOM (normal Hands Free handshake), everything goes well and I can get and make phonecalls.
However, after stopping the bluetooth on the ATOM and restart it after a while there is no communication between the devices any more and I have to add the Supertooth again to work.
I did not have the problem with the previous cooked WM5 ROMs.
Any Ideas?
Thanks,
Yaniv
yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...
So A2dp does not work on assembling of Wm6 for Exec Aku0.7a.0, authors so can not correct this bag already during 2-5 months, explaining that for them a garniture absents with A2DP,AVRCP, very it is sorry...
Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........
hooliganboy214 said:
Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........
Click to expand...
Click to collapse
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5
MSI Player is unholy bull**** crap. We need native BT stereo in any player/
chartreux said:
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
Click to expand...
Click to collapse
Does not work!!!
Actually, i dont have any bluetooth device, would you please someone try this,.
http://forum.xda-developers.com/showthread.php?t=332692&page=14
post #670
Report the result okay,.
Garmin said:
Actually, i dont have any bluetooth device, would you please someone try this,.
http://forum.xda-developers.com/showthread.php?t=332692&page=14
post #670
Report the result okay,.
Click to expand...
Click to collapse
/HKLM/Drivers/BuiltIn/BtA2dpSnd
remove any Priority256 value
HKLM/Drivers/BuiltIn/WaveDev,
Priority256=149
/HKLM/Software/Microsoft/Bluetooth/AudioGateway
Capability=37
/HKLM/Software/Microsoft/Bluetooth/A2DP/Settings
UseJointStereo=0
BitPool=58
MaxSupportedBitPool=80
Remove all other values from this key including SampleRate
Does not work!!!
Coarls said:
yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...
Click to expand...
Click to collapse
you did not check the option for bluetooth settings -> make this device visible to other devices.
I have been using bluetooth to activesync with pc and interchange with other pda phone, but the atom can easily be found
i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5
Click to expand...
Click to collapse
This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).
Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.
Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>
Headset: SonicGear Blue2 SR300
NEW bluetooth audio gateway
Ultimate Chicken said:
This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).
Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.
Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>
Headset: SonicGear Blue2 SR300
Click to expand...
Click to collapse
thanks for clearing that out Ulti. I was wondering if you could try one more time with wm6 ms bluetooth stack? In the headset profile, I have tried to integrate a new set of bluetooth audio gateway. Unfortunately, this requires flashing a new ROM as the modules need to stay modules to work.
It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.
http://www.mediafire.com/?0uqg0utmpkx
Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv
yanivw said:
Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv
Click to expand...
Click to collapse
Yaniv,
for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.
Have you tried the the WM6 A2DP with WM6 audio gateway driver?
jiggs said:
Yaniv,
for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.
Have you tried the the WM6 A2DP with WM6 audio gateway driver?
Click to expand...
Click to collapse
I did not.
How do I get and install it ?
Yaniv
yanivw said:
I did not.
How do I get and install it ?
Yaniv
Click to expand...
Click to collapse
Post#13 above
It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.
http://www.mediafire.com/?0uqg0utmpkx
Click to expand...
Click to collapse
Thanks, Jiggs, but the A2DP's still NG to my headset with this test ROM. Replacing the keyboard with the black one I liked back during O2 Mini BigStorage is a nice touch, tho.
Anyone else with a BT Stereo Headset, especially a 2.0 standard one, go ahead and help test. You may have better luck than me (the SR200 is just BT1.2 standard, and I'm now pushing SonicGear for a firmware update).
Sorry, I have Pulsar 590E and its 1.2 Bluetooth.
chartreux said:
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
Click to expand...
Click to collapse
Yeah , I just try it , and it works verywell . But my Bluetooth Handset isn't MSI 's device , so i only run it in 31s . Do u have other method ???????
I flashed my HP 6815 with this ROM and all works fine. However my device, who was pairing with a Plantronics headset, may no longer connect with that device. It's there new setings adjust, or there is some cab file who helps to make that work?
Tanx.
So, peolple, anybody knows?
Obelixossauro said:
I flashed my HP 6815 with this ROM and all works fine. However my device, who was pairing with a Plantronics headset, may no longer connect with that device. It's there new setings adjust, or there is some cab file who helps to make that work?
Tanx.
Click to expand...
Click to collapse
does normal OBEX work?
maniac2403 said:
does normal OBEX work?
Click to expand...
Click to collapse
Sorry? Do you mean normal (original) ROM?
Obelixossauro said:
Sorry? Do you mean normal (original) ROM?
Click to expand...
Click to collapse
I meant OBEX file transfer with another mobile or a PC?
There is a problem it seems with my atom life too as I am getting problem in attaching my Jabra BT headset. Using Current Tranminh's WM 6.1 ROM but everytime I have to re-discover my headset. Don't know whats the problem but I am finding hard to get the solution. It seems it defies its own specs that it has A2DP.
Hope you have paired the device with a passkey of '0000' and set the device as authorized?
maniac2403 said:
I meant OBEX file transfer with another mobile or a PC?
Click to expand...
Click to collapse
OK. I't doesn't work to...
maniac2403 said:
Hope you have paired the device with a passkey of '0000' and set the device as authorized?
Click to expand...
Click to collapse
When i try to do it phone doesn's find the bluetooth device at all.
With my Atom Life, WM 6.1, that problem doesn't exist, and it finds and pair ups easily with the headset.
Hi!
I've got a Jabra BT3030 headset which works great with the phone and media player in my opinion. It's just that I have problems connecting.
First connection went fine, but when the device already is paired with the phone and I attempt to connect again it fails. I get to input a pin code then (standard should be 0000 according to manual), but it just says failed to connect.
If I unpair and pair them again it works (it doesn't ask for pin then).
Saw a fix on the Sony Ericsson forum where someone had this problem for Xperia, and they posted some cab file (Cyberon_Voice_Speed_Dial_v1.2___BT_Fix.cab), but I'm doubting it's possible to use on my Hero, and if it is, I have no idea how to do that.
Any thoughts?
Thanks.
You can't use any .cab's in android. and i think that fix is a registry fix and android doensn't have a fix.
i also noticed that bluetooth doesn't work without errors i hope that it will be fixed with android 2.0 we have to wait. but i didn't had any problems with my BT headset it also pairs automaticly.
Yeah I thought it wouldn't work... Well hoping for a fix.
Same problem here.
Yes I got the same problem with it not reconnecing. You can get it to work evensually by turn you bluetooth off and on afew time but i find it quicker just to unpair then repair each time. But apart for that, it works and sounds great.
Isn't 1234 the correct standard code ?
Problems with Bluetouth Headset Jabra BT3030
I have the same probleme, for me Jabra BT3030 Headset works wery well with WM 5,and 6 but doesn't works with WM6,1 or WM6,5
Is anyone has a solution or tips.
HTC Touch Cruise (P3650)
WM6,5
Manila 2D v2.0 build 19191432.04
Thanks.
Jabra BT3030 Headset with HTC
Yes, good news for me .
I did finaly fix my bluetouth Jabra BT 3030 with WM6.5 when I upgraded my HTC Touch Cruise from this (Hotfix to enhance the security mechanism of Bluetooth service)
http://www.htc.com/europe/supportdownloadlist.aspx?p_id=59&act=sd&cat=0
Now it works very well., I was a good hotfix for bluetouth
HTC Touch Cruise (P3650)
WM6,5
Manila 2D v2.0 build 19191432.04
Had the same problem with the BT3030 but suddenly it's not doing it anymore!
Just works great!
i bought the same one ... guys how many hours it should take for charge ? also i am very confused with the lights red. yellow n etc etc is there anyone using the same one ?& can give me bit manual how to use it .? would be very grateful..
http://www.jabra.co.uk/sites/Jabra/.../BT3030/Documents/UM/BT3030_UM_UK_EN_3124.pdf
sadape said:
http://www.jabra.co.uk/sites/Jabra/.../BT3030/Documents/UM/BT3030_UM_UK_EN_3124.pdf
Click to expand...
Click to collapse
Thanks Manual is really awesome .. that works
I've also had some strange problems pairing. Try holding the call button in for 6-7 seconds(instead of the 2-3 seconds) till the device shine solid blue and then pair from other device. This is the method I used to pair to the PC. Goodluck