Related
Okay,
So the new version of Bluetooth Tools has handsfree profiles support now as well as headset profiles.
Does this mean that the XDAII can now be used with any bluetooth carkit?
In theory, but I've not been able to get my M1000 working with the latest Nokia handsfree unit.
Waht version of BT are we talking about? I tried a version a couple of weeks ago, but it cannot hanlde a parrot handsfree kit and a plantronicsx headset at the same time. So I de-installed BT.
Hi Mates,
I don't understand anything anymore. I downloaded the 1.0.1.2 version of Bluetooth tools on the following website, http://www.angeltowns.com, but it simply does'nt work with my Nokia carkit Cark112. There is something about it cause I don't even get the "icon screen" while connecting with the car kit but I get it, this bloody icon screen I mean, while connecting with a Nokia 6310i phone.
Do I do something wrong?? Could someone help??
Thanks and greetings to everyone
Chris
XDA02
Hi Mates,
I don't understand anything anymore. I downloaded the 1.0.1.2 version of Bluetooth tools on the following website, http://www.angeltowns.com, but it simply does'nt work with my Nokia carkit Cark112. There is something about it cause I don't even get the "icon screen" while connecting with the car kit but I get it, this bloody icon screen I mean, while connecting with a Nokia 6310i phone.
Do I do something wrong?? Could someone help??
Thanks and greetings to everyone
Chris
XDA02
Hi, I have a XDA II TSM 500 (Telefonica) in Spanish versions:
rom 1.72.03 ESN
03/*15/04
1.10.00
1337.18
ext rom 1.72.102
And I have a parrot ck3100 but it doens´t work, I cant uase the parrot I have install the bt tools but nothing, bttools v10.12 and 11.00 but nothing, and the widcomm program but nothing, can someone help me?, must I upgrade the room? what rom?. Thanks
The parrot carkit is one of the few that support the BT headset profile. This profile is the only (speech) one the standard Himalaya roms support.
So . . .It should work. Afaik, you do have to configure the parrot in order to make it support the headset (instead of handsfree) profile.
I think this should be in the manual.
As from 1.72 roms there is NO NEED to use the Pocket Bluetooth Tools for these matters. Uninstall those!
The widsomm stack wont help either, because that one supports a lot of protocols, but it does not support the headset . . .
RE
Thanks but when I syncronice my XDA with parrot in the screen of parrot appear HEAD SET!! but dont appear coberture, battery, agenda, and I cant speek throught the parrot my radio versiono is 1.00, whan I configure the XDA II bluetooth I put the com4 and com5 enable is this right?, thanks.
RE
I tested It again, it puts HEADSET in the screen of parrot, whan I call from XDA II puts bluetooth headset is on but I it dosn´t work in parrot or in XDA II listen nothing, and the sincronice fails after 30 seconds, I downloaded 2 roms from here "windowsmobile2003se.exe", "RUU172601WWE.exe" must I put one of this?, thanks.
I bought a parrot driveblue, it didn't work . I called parrots office and they said me my version Rom 1.66.00 radio 1.10.00 wasn't high enough to work with driveblue, and I see that you still have the same radio 1.10.00. Isn't it that, your problem ?
Look edsub has a OS 1.72.00 and a radio 1.17.00.
If you change with your ESN by a WWE , be carefull with the country error code !
May be I'm wrong and this have nothing to see with your problem.
hi
TOMY00
PLEASE
use himegetdeviceinfo.exe on your device
and give me the informations you found on file devicedata
on windows directory on your pda
please
my device is dead
and i need the operator code from telefonica movistar
thanks
I have one of the first Parrot CK3000 which works fine with a Sony T610 mobile. I have expended hours of effort trying to get to work with an XDAI, an XDAII and a PDA2K (borrowed).
I tried Windows Mobile 2003, 2003se and various BT tools. None worked.
I upgraded my XDAII to Magneto (WM5) and BINGO! works fine now!
Petermcc said:
I have one of the first Parrot CK3000 which works fine with a Sony T610 mobile. I have expended hours of effort trying to get to work with an XDAI, an XDAII and a PDA2K (borrowed).
I tried Windows Mobile 2003, 2003se and various BT tools. None worked.
I upgraded my XDAII to Magneto (WM5) and BINGO! works fine now!
Click to expand...
Click to collapse
ck3000 here worked almost fine with MDA1, MDA2 (original) and MDA2 with wm2005. BUT no chance to change the volume of the loudspeakers. are you able to do this?
I finally succeeded to make the HP BT Stereo work with a i-Trek GPS and a Stowaway BT Keyboard. All of this with the widcomm 1.5.0.2000...But,....
no luck with a BT headset Bluetrek G2 it only works with the msBT stack...
It would be very appreciate if somebody could make a stackswitcher like the one which seems to be working with the widcomm 3500...
Is there any chance to get it somwhere ?
Thanks for somebody who can help me...
Re: stackswitcher required for HP BT Headphones + BTHeadset
newworld666 said:
I finally succeeded to make the HP BT Stereo work with a i-Trek GPS and a Stowaway BT Keyboard. All of this with the widcomm 1.5.0.2000...But,....
no luck with a BT headset Bluetrek G2 it only works with the msBT stack...
It would be very appreciate if somebody could make a stackswitcher like the one which seems to be working with the widcomm 3500...
Is there any chance to get it somwhere ?
Thanks for somebody who can help me...
Click to expand...
Click to collapse
heres the stackswitcher .. i only test it with broadcom build3500 and build 3900 under WM2003SE 2.06.00WWE but theoretically it should work with widcomm 2000
you will need to install the Buzz lightyear MS Bluetooth ICON (BL_BT_Icon_service.cab)but incase you want to use the MS Bluetooth Original Icon just ..
Heres how to set to original MS Bluetooth ICON
1. open the File Explorer
2. Goto this folder \Program Files\StackSwitcher
3. Then Run DefaultMSBT.exe
4. it will ask you to set to default MS Bluetooth Stack, just click OK
5. Then it will ask you to make a soft reset .. just click ok ..
Now if you want to change it back to Buzz_lightyear MS bt tray icon.. here it is
1. Open the Regedit(Start->Settings->System)
2. Goto This registry Section
HKEY_LOCAL_MACHINE\SOFTWARE
3. Change the value of MSBluetooth to
"BL_BTIcon.DLL"
4. then close the Regedit
5. Set the MS Bluetooth Stack only or Enable Both Stack (Start->Programs->Bluetooth Stack) then click ok to soft reset
or Simply installed again Stackswitcher.02.cab to change back to Buzz lightyear MS Bluetooth ICON the perform step 5 ..
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Thank you for the answer I let you know asap if it is working with widcomm 2000 and 1.72 rom. With 2003se I had many difficulties and it is not so stable for the headphones.
Re: stackswitcher required for HP BT Headphones + BTHeadset
toenailedheres said:
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Click to expand...
Click to collapse
)))))) yeah !!!
in case, you'll need some help, just let me know...
Make sure, you check this out as well:
http://forum.xda-developers.com/viewtopic.php?t=17476
)
buzz
newworld666 said:
Thank you for the answer I let you know asap if it is working with widcomm 2000 and 1.72 rom. With 2003se I had many difficulties and it is not so stable for the headphones.
Click to expand...
Click to collapse
hiya new..
i dont know if the stackswitcher will work in 1.72.rom since it is design for wm2003se .. anyway .. you can try it .. just make a backup first .. :wink:
Re: stackswitcher required for HP BT Headphones + BTHeadset
buzz_lightyear said:
toenailedheres said:
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Click to expand...
Click to collapse
)))))) yeah !!!
in case, you'll need some help, just let me know...
Make sure, you check this out as well:
http://forum.xda-developers.com/viewtopic.php?t=17476
)
buzz
Click to expand...
Click to collapse
yeah i love all your releases .. i mean all of it .. the bluetooth icon .. the skinned keyboard .. your marvelous switch it .. i love it .. and all your application is always part of my xda .. :wink:
n tnx for all of that ..
anyway i already posted my one tiny wishlist .. hope you can make it .. bro ..
Re: stackswitcher required for HP BT Headphones + BTHeadset
toenailed said:
buzz_lightyear said:
toenailedheres said:
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Click to expand...
Click to collapse
)))))) yeah !!!
in case, you'll need some help, just let me know...
Make sure, you check this out as well:
http://forum.xda-developers.com/viewtopic.php?t=17476
)
buzz
Click to expand...
Click to collapse
yeah i love all your releases .. i mean all of it .. the bluetooth icon .. the skinned keyboard .. your marvelous switch it .. i love it .. and all your application is always part of my xda .. :wink:
n tnx for all of that ..
anyway i already posted my one tiny wishlist .. hope you can make it .. bro ..
Click to expand...
Click to collapse
THANX man, that makes me really GLAD.. )))
maybe I should start selling that ****.. ))))))))
I have only very little free time at the moment, but I WILL take a look at the wishlist.
)
buzz
Thank you very much for the stackswitch now I can enjoy :
,with the widcom BT stack, some music with the HP BT Headphone while I am on Internet with the Stowaway BT Keyboard and mouse.
with the Ms BT stack I can use the Bluetrek G2 Headset for some phone call while Navigon 4 is leading me to the right place with the itrek BT GPS....
And I don't need any cables... what a joy...
Thanks
Re: stackswitcher required for HP BT Headphones + BTHeadset
buzz_lightyear said:
THANX man, that makes me really GLAD.. )))
Click to expand...
Click to collapse
ur welcome buzz .. just love you work .. n i think i will love your future releases .. :wink:
buzz_lightyear said:
maybe I should start selling that ****.. ))))))))
I have only very little free time at the moment, but I WILL take a look at the wishlist.
)
buzz
Click to expand...
Click to collapse
glad to hear that buzz .. i will just check everyday your thread and see for new update ..
tnx buzz ..
and more power to you buzz and all of your marvelous work and program ..
glad we have a buzz_lightyear in this forum .. tnx for everything .. man ..
newworld666 said:
Thank you very much for the stackswitch now I can enjoy :
,with the widcom BT stack, some music with the HP BT Headphone while I am on Internet with the Stowaway BT Keyboard and mouse.
with the Ms BT stack I can use the Bluetrek G2 Headset for some phone call while Navigon 4 is leading me to the right place with the itrek BT GPS....
And I don't need any cables... what a joy...
Thanks
Click to expand...
Click to collapse
ur welcome and glad i help .. so this means that .. the proggie works in 1.72 .. that was great..
Hi,
very interested. Where I can get Widcomm stack, which is working with switcher? please give me a link...
Sorry dind't write that it is only working with 2.06. I tried with 1.72 but no success so I changed to 2.06 and now it is working perfectly.
Thanks
I tryed it on 1.72 and its seems to work... but I don't know exactly - I charging my Headset at home and I am at work now...
So what do you exactly mean with that "don't working with 1.72"
please describe....
BTW: It seems that my device is slower? How that aplication works?
Mirek
I couldn't switch or make both stacks appear on the same time and just put one on and pair something with it.
With 2.06 rom I can stop the broadcomm stack and use the MS with a BT headset and a BT GPS and when I am in a train whithout ressint I stop the MS and then I can use the Broadcomm with a HP BT Headphone and a BT Keyboard and mouse.
Just the headphones doesn't work in any case with the MS stack and the Headset doesn't work with Broadcomm
newworld666 said:
I couldn't switch or make both stacks appear on the same time and just put one on and pair something with it.
Click to expand...
Click to collapse
I tryed this and its work on 1.72. I had both stack active. I must activate MS stack first, then Widcomm. I tryed to pair Headset with MS and Leadtek GPS with Widcomm and pairing was sucessful....
Yesterday, I tryed new Broadcom 1.6.0 b0600 stack and it may work with headset. in older version, when I tryed to pair headset, it paired with it, but if I tryed to connect it error follows.
In Broadcomm 1.6.0 I tryed to pair (sucess), connect (sucess), run Wm Player and headset icon was changed, my headset beeps. But thats all. The problem is, that there are some new registry settings in .reg file included in 1.6.0. I don't know, how to import .reg file in my XDA. PHM regedit has Import command disabled...
Do you know, how to import .reg file?
Mirek
I use Tascal Regedit. it is a freeware
http://www2r.biglobe.ne.jp/~tascal/download/down.cgi?tre090p
I have a wizard & jensen wbt212. I can pair them without problems but the jensen device does not work as handsfree. What can I do to make it work as handsfree? it works perfect as wireless headset with wm player but doesn't wok as handsfree
What did you have to do to make it work as a headphone? Did you install a a2dp hack?
Yes, I installed that hack... but it just work as a headphone... I cannot make it work as a handsfree and answer the phone... any clue?
I am having the same issue with my Cingular 8125. Works great as stereo headphones but won't work as headset. Phone recognizes it as headset, but "turn on headset" is grayed out and it never recognizes the headset.
Please let me know if you find a solution.... I'm frustrated with this
Solution found... flash latest and stable version of either TNT or AMP roms and then (buy and) install JETware mobile add-on... It solved the problem and now it works as both handset and headphone...
Regards
Hi Guys,
I have encountered the following problem.
When I first add my Supertooth II (car kit) to the ATOM (normal Hands Free handshake), everything goes well and I can get and make phonecalls.
However, after stopping the bluetooth on the ATOM and restart it after a while there is no communication between the devices any more and I have to add the Supertooth again to work.
I did not have the problem with the previous cooked WM5 ROMs.
Any Ideas?
Thanks,
Yaniv
yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...
So A2dp does not work on assembling of Wm6 for Exec Aku0.7a.0, authors so can not correct this bag already during 2-5 months, explaining that for them a garniture absents with A2DP,AVRCP, very it is sorry...
Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........
hooliganboy214 said:
Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........
Click to expand...
Click to collapse
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5
MSI Player is unholy bull**** crap. We need native BT stereo in any player/
chartreux said:
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
Click to expand...
Click to collapse
Does not work!!!
Actually, i dont have any bluetooth device, would you please someone try this,.
http://forum.xda-developers.com/showthread.php?t=332692&page=14
post #670
Report the result okay,.
Garmin said:
Actually, i dont have any bluetooth device, would you please someone try this,.
http://forum.xda-developers.com/showthread.php?t=332692&page=14
post #670
Report the result okay,.
Click to expand...
Click to collapse
/HKLM/Drivers/BuiltIn/BtA2dpSnd
remove any Priority256 value
HKLM/Drivers/BuiltIn/WaveDev,
Priority256=149
/HKLM/Software/Microsoft/Bluetooth/AudioGateway
Capability=37
/HKLM/Software/Microsoft/Bluetooth/A2DP/Settings
UseJointStereo=0
BitPool=58
MaxSupportedBitPool=80
Remove all other values from this key including SampleRate
Does not work!!!
Coarls said:
yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...
Click to expand...
Click to collapse
you did not check the option for bluetooth settings -> make this device visible to other devices.
I have been using bluetooth to activesync with pc and interchange with other pda phone, but the atom can easily be found
i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5
Click to expand...
Click to collapse
This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).
Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.
Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>
Headset: SonicGear Blue2 SR300
NEW bluetooth audio gateway
Ultimate Chicken said:
This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).
Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.
Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>
Headset: SonicGear Blue2 SR300
Click to expand...
Click to collapse
thanks for clearing that out Ulti. I was wondering if you could try one more time with wm6 ms bluetooth stack? In the headset profile, I have tried to integrate a new set of bluetooth audio gateway. Unfortunately, this requires flashing a new ROM as the modules need to stay modules to work.
It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.
http://www.mediafire.com/?0uqg0utmpkx
Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv
yanivw said:
Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv
Click to expand...
Click to collapse
Yaniv,
for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.
Have you tried the the WM6 A2DP with WM6 audio gateway driver?
jiggs said:
Yaniv,
for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.
Have you tried the the WM6 A2DP with WM6 audio gateway driver?
Click to expand...
Click to collapse
I did not.
How do I get and install it ?
Yaniv
yanivw said:
I did not.
How do I get and install it ?
Yaniv
Click to expand...
Click to collapse
Post#13 above
It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.
http://www.mediafire.com/?0uqg0utmpkx
Click to expand...
Click to collapse
Thanks, Jiggs, but the A2DP's still NG to my headset with this test ROM. Replacing the keyboard with the black one I liked back during O2 Mini BigStorage is a nice touch, tho.
Anyone else with a BT Stereo Headset, especially a 2.0 standard one, go ahead and help test. You may have better luck than me (the SR200 is just BT1.2 standard, and I'm now pushing SonicGear for a firmware update).
Sorry, I have Pulsar 590E and its 1.2 Bluetooth.
chartreux said:
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
Click to expand...
Click to collapse
Yeah , I just try it , and it works verywell . But my Bluetooth Handset isn't MSI 's device , so i only run it in 31s . Do u have other method ???????