I flashed my HP 6815 with this ROM and all works fine. However my device, who was pairing with a Plantronics headset, may no longer connect with that device. It's there new setings adjust, or there is some cab file who helps to make that work?
Tanx.
So, peolple, anybody knows?
Obelixossauro said:
I flashed my HP 6815 with this ROM and all works fine. However my device, who was pairing with a Plantronics headset, may no longer connect with that device. It's there new setings adjust, or there is some cab file who helps to make that work?
Tanx.
Click to expand...
Click to collapse
does normal OBEX work?
maniac2403 said:
does normal OBEX work?
Click to expand...
Click to collapse
Sorry? Do you mean normal (original) ROM?
Obelixossauro said:
Sorry? Do you mean normal (original) ROM?
Click to expand...
Click to collapse
I meant OBEX file transfer with another mobile or a PC?
There is a problem it seems with my atom life too as I am getting problem in attaching my Jabra BT headset. Using Current Tranminh's WM 6.1 ROM but everytime I have to re-discover my headset. Don't know whats the problem but I am finding hard to get the solution. It seems it defies its own specs that it has A2DP.
Hope you have paired the device with a passkey of '0000' and set the device as authorized?
maniac2403 said:
I meant OBEX file transfer with another mobile or a PC?
Click to expand...
Click to collapse
OK. I't doesn't work to...
maniac2403 said:
Hope you have paired the device with a passkey of '0000' and set the device as authorized?
Click to expand...
Click to collapse
When i try to do it phone doesn's find the bluetooth device at all.
With my Atom Life, WM 6.1, that problem doesn't exist, and it finds and pair ups easily with the headset.
Related
I finally succeeded to make the HP BT Stereo work with a i-Trek GPS and a Stowaway BT Keyboard. All of this with the widcomm 1.5.0.2000...But,....
no luck with a BT headset Bluetrek G2 it only works with the msBT stack...
It would be very appreciate if somebody could make a stackswitcher like the one which seems to be working with the widcomm 3500...
Is there any chance to get it somwhere ?
Thanks for somebody who can help me...
Re: stackswitcher required for HP BT Headphones + BTHeadset
newworld666 said:
I finally succeeded to make the HP BT Stereo work with a i-Trek GPS and a Stowaway BT Keyboard. All of this with the widcomm 1.5.0.2000...But,....
no luck with a BT headset Bluetrek G2 it only works with the msBT stack...
It would be very appreciate if somebody could make a stackswitcher like the one which seems to be working with the widcomm 3500...
Is there any chance to get it somwhere ?
Thanks for somebody who can help me...
Click to expand...
Click to collapse
heres the stackswitcher .. i only test it with broadcom build3500 and build 3900 under WM2003SE 2.06.00WWE but theoretically it should work with widcomm 2000
you will need to install the Buzz lightyear MS Bluetooth ICON (BL_BT_Icon_service.cab)but incase you want to use the MS Bluetooth Original Icon just ..
Heres how to set to original MS Bluetooth ICON
1. open the File Explorer
2. Goto this folder \Program Files\StackSwitcher
3. Then Run DefaultMSBT.exe
4. it will ask you to set to default MS Bluetooth Stack, just click OK
5. Then it will ask you to make a soft reset .. just click ok ..
Now if you want to change it back to Buzz_lightyear MS bt tray icon.. here it is
1. Open the Regedit(Start->Settings->System)
2. Goto This registry Section
HKEY_LOCAL_MACHINE\SOFTWARE
3. Change the value of MSBluetooth to
"BL_BTIcon.DLL"
4. then close the Regedit
5. Set the MS Bluetooth Stack only or Enable Both Stack (Start->Programs->Bluetooth Stack) then click ok to soft reset
or Simply installed again Stackswitcher.02.cab to change back to Buzz lightyear MS Bluetooth ICON the perform step 5 ..
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Thank you for the answer I let you know asap if it is working with widcomm 2000 and 1.72 rom. With 2003se I had many difficulties and it is not so stable for the headphones.
Re: stackswitcher required for HP BT Headphones + BTHeadset
toenailedheres said:
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Click to expand...
Click to collapse
)))))) yeah !!!
in case, you'll need some help, just let me know...
Make sure, you check this out as well:
http://forum.xda-developers.com/viewtopic.php?t=17476
)
buzz
newworld666 said:
Thank you for the answer I let you know asap if it is working with widcomm 2000 and 1.72 rom. With 2003se I had many difficulties and it is not so stable for the headphones.
Click to expand...
Click to collapse
hiya new..
i dont know if the stackswitcher will work in 1.72.rom since it is design for wm2003se .. anyway .. you can try it .. just make a backup first .. :wink:
Re: stackswitcher required for HP BT Headphones + BTHeadset
buzz_lightyear said:
toenailedheres said:
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Click to expand...
Click to collapse
)))))) yeah !!!
in case, you'll need some help, just let me know...
Make sure, you check this out as well:
http://forum.xda-developers.com/viewtopic.php?t=17476
)
buzz
Click to expand...
Click to collapse
yeah i love all your releases .. i mean all of it .. the bluetooth icon .. the skinned keyboard .. your marvelous switch it .. i love it .. and all your application is always part of my xda .. :wink:
n tnx for all of that ..
anyway i already posted my one tiny wishlist .. hope you can make it .. bro ..
Re: stackswitcher required for HP BT Headphones + BTHeadset
toenailed said:
buzz_lightyear said:
toenailedheres said:
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Click to expand...
Click to collapse
)))))) yeah !!!
in case, you'll need some help, just let me know...
Make sure, you check this out as well:
http://forum.xda-developers.com/viewtopic.php?t=17476
)
buzz
Click to expand...
Click to collapse
yeah i love all your releases .. i mean all of it .. the bluetooth icon .. the skinned keyboard .. your marvelous switch it .. i love it .. and all your application is always part of my xda .. :wink:
n tnx for all of that ..
anyway i already posted my one tiny wishlist .. hope you can make it .. bro ..
Click to expand...
Click to collapse
THANX man, that makes me really GLAD.. )))
maybe I should start selling that ****.. ))))))))
I have only very little free time at the moment, but I WILL take a look at the wishlist.
)
buzz
Thank you very much for the stackswitch now I can enjoy :
,with the widcom BT stack, some music with the HP BT Headphone while I am on Internet with the Stowaway BT Keyboard and mouse.
with the Ms BT stack I can use the Bluetrek G2 Headset for some phone call while Navigon 4 is leading me to the right place with the itrek BT GPS....
And I don't need any cables... what a joy...
Thanks
Re: stackswitcher required for HP BT Headphones + BTHeadset
buzz_lightyear said:
THANX man, that makes me really GLAD.. )))
Click to expand...
Click to collapse
ur welcome buzz .. just love you work .. n i think i will love your future releases .. :wink:
buzz_lightyear said:
maybe I should start selling that ****.. ))))))))
I have only very little free time at the moment, but I WILL take a look at the wishlist.
)
buzz
Click to expand...
Click to collapse
glad to hear that buzz .. i will just check everyday your thread and see for new update ..
tnx buzz ..
and more power to you buzz and all of your marvelous work and program ..
glad we have a buzz_lightyear in this forum .. tnx for everything .. man ..
newworld666 said:
Thank you very much for the stackswitch now I can enjoy :
,with the widcom BT stack, some music with the HP BT Headphone while I am on Internet with the Stowaway BT Keyboard and mouse.
with the Ms BT stack I can use the Bluetrek G2 Headset for some phone call while Navigon 4 is leading me to the right place with the itrek BT GPS....
And I don't need any cables... what a joy...
Thanks
Click to expand...
Click to collapse
ur welcome and glad i help .. so this means that .. the proggie works in 1.72 .. that was great..
Hi,
very interested. Where I can get Widcomm stack, which is working with switcher? please give me a link...
Sorry dind't write that it is only working with 2.06. I tried with 1.72 but no success so I changed to 2.06 and now it is working perfectly.
Thanks
I tryed it on 1.72 and its seems to work... but I don't know exactly - I charging my Headset at home and I am at work now...
So what do you exactly mean with that "don't working with 1.72"
please describe....
BTW: It seems that my device is slower? How that aplication works?
Mirek
I couldn't switch or make both stacks appear on the same time and just put one on and pair something with it.
With 2.06 rom I can stop the broadcomm stack and use the MS with a BT headset and a BT GPS and when I am in a train whithout ressint I stop the MS and then I can use the Broadcomm with a HP BT Headphone and a BT Keyboard and mouse.
Just the headphones doesn't work in any case with the MS stack and the Headset doesn't work with Broadcomm
newworld666 said:
I couldn't switch or make both stacks appear on the same time and just put one on and pair something with it.
Click to expand...
Click to collapse
I tryed this and its work on 1.72. I had both stack active. I must activate MS stack first, then Widcomm. I tryed to pair Headset with MS and Leadtek GPS with Widcomm and pairing was sucessful....
Yesterday, I tryed new Broadcom 1.6.0 b0600 stack and it may work with headset. in older version, when I tryed to pair headset, it paired with it, but if I tryed to connect it error follows.
In Broadcomm 1.6.0 I tryed to pair (sucess), connect (sucess), run Wm Player and headset icon was changed, my headset beeps. But thats all. The problem is, that there are some new registry settings in .reg file included in 1.6.0. I don't know, how to import .reg file in my XDA. PHM regedit has Import command disabled...
Do you know, how to import .reg file?
Mirek
I use Tascal Regedit. it is a freeware
http://www2r.biglobe.ne.jp/~tascal/download/down.cgi?tre090p
Hi Guys,
I have encountered the following problem.
When I first add my Supertooth II (car kit) to the ATOM (normal Hands Free handshake), everything goes well and I can get and make phonecalls.
However, after stopping the bluetooth on the ATOM and restart it after a while there is no communication between the devices any more and I have to add the Supertooth again to work.
I did not have the problem with the previous cooked WM5 ROMs.
Any Ideas?
Thanks,
Yaniv
yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...
So A2dp does not work on assembling of Wm6 for Exec Aku0.7a.0, authors so can not correct this bag already during 2-5 months, explaining that for them a garniture absents with A2DP,AVRCP, very it is sorry...
Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........
hooliganboy214 said:
Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........
Click to expand...
Click to collapse
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5
MSI Player is unholy bull**** crap. We need native BT stereo in any player/
chartreux said:
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
Click to expand...
Click to collapse
Does not work!!!
Actually, i dont have any bluetooth device, would you please someone try this,.
http://forum.xda-developers.com/showthread.php?t=332692&page=14
post #670
Report the result okay,.
Garmin said:
Actually, i dont have any bluetooth device, would you please someone try this,.
http://forum.xda-developers.com/showthread.php?t=332692&page=14
post #670
Report the result okay,.
Click to expand...
Click to collapse
/HKLM/Drivers/BuiltIn/BtA2dpSnd
remove any Priority256 value
HKLM/Drivers/BuiltIn/WaveDev,
Priority256=149
/HKLM/Software/Microsoft/Bluetooth/AudioGateway
Capability=37
/HKLM/Software/Microsoft/Bluetooth/A2DP/Settings
UseJointStereo=0
BitPool=58
MaxSupportedBitPool=80
Remove all other values from this key including SampleRate
Does not work!!!
Coarls said:
yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...
Click to expand...
Click to collapse
you did not check the option for bluetooth settings -> make this device visible to other devices.
I have been using bluetooth to activesync with pc and interchange with other pda phone, but the atom can easily be found
i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5
Click to expand...
Click to collapse
This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).
Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.
Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>
Headset: SonicGear Blue2 SR300
NEW bluetooth audio gateway
Ultimate Chicken said:
This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).
Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.
Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>
Headset: SonicGear Blue2 SR300
Click to expand...
Click to collapse
thanks for clearing that out Ulti. I was wondering if you could try one more time with wm6 ms bluetooth stack? In the headset profile, I have tried to integrate a new set of bluetooth audio gateway. Unfortunately, this requires flashing a new ROM as the modules need to stay modules to work.
It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.
http://www.mediafire.com/?0uqg0utmpkx
Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv
yanivw said:
Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv
Click to expand...
Click to collapse
Yaniv,
for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.
Have you tried the the WM6 A2DP with WM6 audio gateway driver?
jiggs said:
Yaniv,
for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.
Have you tried the the WM6 A2DP with WM6 audio gateway driver?
Click to expand...
Click to collapse
I did not.
How do I get and install it ?
Yaniv
yanivw said:
I did not.
How do I get and install it ?
Yaniv
Click to expand...
Click to collapse
Post#13 above
It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.
http://www.mediafire.com/?0uqg0utmpkx
Click to expand...
Click to collapse
Thanks, Jiggs, but the A2DP's still NG to my headset with this test ROM. Replacing the keyboard with the black one I liked back during O2 Mini BigStorage is a nice touch, tho.
Anyone else with a BT Stereo Headset, especially a 2.0 standard one, go ahead and help test. You may have better luck than me (the SR200 is just BT1.2 standard, and I'm now pushing SonicGear for a firmware update).
Sorry, I have Pulsar 590E and its 1.2 Bluetooth.
chartreux said:
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
Click to expand...
Click to collapse
Yeah , I just try it , and it works verywell . But my Bluetooth Handset isn't MSI 's device , so i only run it in 31s . Do u have other method ???????
i would liketo buy it
but it does not say its compatible with Tytn/Hermes
actually what the story inside?
It´ll work fine.
You just need to know that the buttons ONLY work for WMP (and HTC player....).
So If you use TCPMP or another player, the remote is useless. You will still get audio though. But if it´s just the audio you want, there are much cheaper solutions that work.
greetz,
Pfeffa-rah
Pfeffa-rah said:
It´ll work fine.
You just need to know that the buttons ONLY work for WMP (and HTC player....).
So If you use TCPMP or another player, the remote is useless. You will still get audio though. But if it´s just the audio you want, there are much cheaper solutions that work.
greetz,
Pfeffa-rah
Click to expand...
Click to collapse
Unfortunately my Vodafone V1605 don't recognize it! I've downloaded and isntaled the RC W100 driver from the official HTC Site, but it don't work with WMP... the answer button don't make any effect...
I use the Schap's Rom 4.31... perhaps i must change the rom?
I've a Wired Remote Controller dopod S1 bought to ebay.
Unfortunatelly my Tytn don't recognize this rc-w100... exist a full working driver for TYTN alias Hermes????
I've downloaded the official driver and i extracted and installed "manually" all the singular cab files!!!!
The results is listed above:
all the Remote_controller_Y-cable_Ax files, the Y-cable_B1_070323 and the Y-cable_E1_070323 and don't works and they produces a blank screen after the reset (so i have made an hard reset everytimes!)
Remote_controller_P1_070316.cab and the Y-cable_HERM1_070316.cab don't make any changes and the rc-w100 isn't recognized at all!
Remote_controller_AT1_070316.cab mute all the sound alsoo if i disconnect the RC-W100
Only with Remote_controller_Y-cable_T1_070316.cab the RC-W100 is recognized as a simple headphone
SO DON'T EXIST A FULL WORKING FUC***NG DRIVER!!!????
i'm desperate...
note:sorry for my baaaad english
Pfeffa-rah said:
It´ll work fine.
You just need to know that the buttons ONLY work for WMP (and HTC player....).
So If you use TCPMP or another player, the remote is useless. You will still get audio though. But if it´s just the audio you want, there are much cheaper solutions that work.
greetz,
Pfeffa-rah
Click to expand...
Click to collapse
Pfeffa-rah, what other cheaper solution that u are talking about? I am interested.
Thanks in advance.
7wolf said:
Unfortunately my Vodafone V1605 don't recognize it! I've downloaded and isntaled the RC W100 driver from the official HTC Site, but it don't work with WMP... the answer button don't make any effect...
I use the Schap's Rom 4.31... perhaps i must change the rom?
Click to expand...
Click to collapse
Hi, Could you send me that W100 remote driver as I cannot find it. I have x2 tytn ii and it works on one and not the other... Thanks, J
w100
yeah i could do with that driver too.
E100 Driver cabinets, anyone?
Just got this POS today-when I plugged it in to a stock WM6 TyTN ROM, it didn't do squat-no work at all-no sound to the phones even!
I rooted around and found the remote_controller_Y_cable_T1_070316.cab and dropped it in-now I get headphone sounds at least, but everytime I try to launch the installer It says I have the latest drivers-and I can't seem to catch the thing at the point where I can snap up the cabinets.
Can someone post the other cabinets?
wazmo said:
Just got this POS today-when I plugged it in to a stock WM6 TyTN ROM, it didn't do squat-no work at all-no sound to the phones even!
I rooted around and found the remote_controller_Y_cable_T1_070316.cab and dropped it in-now I get headphone sounds at least, but everytime I try to launch the installer It says I have the latest drivers-and I can't seem to catch the thing at the point where I can snap up the cabinets.
Can someone post the other cabinets?
Click to expand...
Click to collapse
Never mind-I got 'em all by doing an install on my XP laptop with my device disconnected.
Who sez XP is junk?
Driver
Can someone put up the driver for the rc-w100? Couldnt find one on the official site. Tried googling but its nowhere to be found. Bought it on ebay, checked the "compatibility list" and my VOX is there. This kinda sucks.
Try htc music plug-in 1.0, I install it then my rc E-100 worked!But you can't use it with a Y cable.
hykq said:
Try htc music plug-in 1.0, I install it then my rc E-100 worked!But you can't use it with a Y cable.
Click to expand...
Click to collapse
Too late-I returned it.
But thanks for the heads-up-maybe someone else will use your info.
HTClugin?
Hi, any chance u can upload ur version of the plugin? thx
Where can the htc music plug-in 1.0 be found ?
Yeah, same question. I've just bought W100 and it's not woring on Schap's 4.31 ROM. Ideas.
download for the driver,now missing in htc support this fix
plese upload this file!!!!!!!!!!!!!!
I cant use RC E100 on my herm100. There is no any sound on ;-(
Any solution?
W100/E100: HTC's Achilles Heels
Don't buy those remote controllers.
Simples!!!!!!
THis file will enable you to listen to music, buttons doesnt work though... Is there anyone who has an idea how to make the buttons work?
For remote control via IRDA. What do you know about it?
vovan10baran said:
For remote control via IRDA. What do you know about it?
Click to expand...
Click to collapse
the topaz doesnt have a irda port. wish it did though. loved it on my hermes.
Well, but can I connect it to the device via MiniUSB?
vovan10baran said:
Well, but can I connect it to the device via MiniUSB?
Click to expand...
Click to collapse
maybe, seems like more hassle than its worth to me. just use bluetooth
i am missing it also, my Axim x51 was also a remote control replacement
Hi.
I decided to ask You about BT.
Only device I was able to pair with TG01 was my PDA HP ipaq 214. This way I was able to use internet on ipaq 214 utilizing GPRS connection in TG01.
Unfortunately, I have never been able to pair TG01 with PC or PNA device.
BT manager on TG01 seems to be hopeless in comparison to ipaq214. Maybe it only pairs devices via PAN and that is why I am not able to do it with mentioned devices ?
Any solutions ?
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Hi.
I decided to ask You about BT.
Only device I was able to pair with TG01 was my PDA HP ipaq 214. This way I was able to use internet on ipaq 214 utilizing GPRS connection in TG01.
Unfortunately, I have never been able to pair TG01 with PC or PNA device.
BT manager on TG01 seems to be hopeless in comparison to ipaq214. Maybe it only pairs devices via PAN and that is why I am not able to do it with mentioned devices ?
Any solutions ?
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Hi fxdjacentyfxd
I conected my self the TG01 with a friend of mine who have a Samsung wave S8500(BADA OS) and it worked well!
I start the BT after that i just go in Total Commander and chosse the file, click on it and choose "send via bluetooth" and the manager start by himself and find the other phone!
Not to mention that I pair my phone everyday with my car audio sistem!
I think the PC drivers are to blame for your problems!
Rila said:
Hi fxdjacentyfxd
I conected my self the TG01 with a friend of mine who have a Samsung wave S8500(BADA OS) and it worked well!
I start the BT after that i just go in Total Commander and chosse the file, click on it and choose "send via bluetooth" and the manager start by himself and find the other phone!
Not to mention that I pair my phone everyday with my car audio sistem!
I think the PC drivers are to blame for your problems!
Click to expand...
Click to collapse
Thanks.
In pairing process I always get to step that I type autentication password. After this devices stay unpaired. As I mentioned, only with ipaq 214 it works perfect.
Regards
fxdjacentyfxd
I am also having problem with Bluetooth transfer to Android phones, while TG01 in Winmo mode... (of course, we don't have Bluetooth in Tg01 android - yet)...
With other devices I didn't have any issues sending files, back and forth. But no file transfer whatsoever with the Samsung Galaxy S (not mine) having a stock Android 2.2.1 on it. Although that Samsung is talking ok with another Samsung mini Galaxy.
fxdjacentyfxd said:
Thanks.
In pairing process I always get to step that I type autentication password. After this devices stay unpaired. As I mentioned, only with ipaq 214 it works perfect.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Try not to step the autentication password! I tried and works for me!
And the freezes I encounter (I told you in other conversation we have) is because of the SIM card!
I change the carrier and now the phone works without freezes!
And a_nini75 we should meet at beer! (see that you are from Buc. also! )
Rila said:
Try not to step the autentication password! I tried and works for me!
Click to expand...
Click to collapse
Thanks.
I paired tg01 with PNA at last .
It seems it was my mistake in interpretation ? Even if not authenticated after discovery, tg01 requests password when PNA wants to open BT port. An icon I got on tg01 after pairing, represents headphones so I thought I did not get port but .... remote headphones .
Now all works perfect. PNA can serve me now as better gps source for navigation software on tg01 especially for garmin mobile xt which is very CPU demanding.
It works rather poor on PNA.
Regards
fxdjacentyfxd