Can anyone help me with this Broadcom Bluetooth stack 1.6.0 cuz everytime i tap the BttrayCE.exe it will not open, nothing will happen if you tap the exe.
http://forum.xda-developers.com/viewtopic.php?t=15563&highlight=broadcom
Related
I have installed widcomm 1-4-1-59 for pocket pc phone edition on my
I-Mate II and i use Resco Explorer ver 5.10 for sending files by bluetooth
so my problems is when i try to send any file to any bluetooth enabled
device like nokia phones it asks for passkey
i went to bluetooth settings >> File Transfer service settings
i've removed the check from authorization required and also from
authenticaion (passkey) required,, same problem it still asks for passkey.
i hope i will find the answer in this great forum.
Pair them first
Have you paired the two devices first. If not then pair them first.
If they were paired before installation of widcomm 1-4-1-59 then remove the pair from Nokia and pair them again with the new stack.
This should solve your problem.
Mark
Hi
Has anyone got the following file?
BluetoothGPS.zip
I need to be able to set up an unsecure Bluetooth Connection with a GPS device.
Thanks
Gadget
Hi guys,
I want to connect to activesync on my pc.
The problem is i only have COM6 & COM7 available on my S200,
so I assign the COM6 in Activesync but can't select COM6 in my Bluetooth
utility.
When trying to synch the S200 is giving me cannot find an existing bluetooth partnership with a pc that supports activesync.
Am i'm doing something wrong here?
any help is appreciated
cheers
koenie said:
Hi guys,
I want to connect to activesync on my pc.
The problem is i only have COM6 & COM7 available on my S200,
so I assign the COM6 in Activesync but can't select COM6 in my Bluetooth
utility.
When trying to synch the S200 is giving me cannot find an existing bluetooth partnership with a pc that supports activesync.
Am i'm doing something wrong here?
any help is appreciated
cheers
Click to expand...
Click to collapse
My problem is same to you ,
Any one can help?
leeleeguo said:
My problem is same to you ,
Any one can help?
Click to expand...
Click to collapse
which bluetooth stack are you using?
toshiba?
gokhanmoral said:
which bluetooth stack are you using?
toshiba?
Click to expand...
Click to collapse
Thanks!
My PC is Dell M1210,and the bluetooth module is Dell wireless 355 Module
with Bluetooth 2.0+EDR Technology
leeleeguo said:
Thanks!
My PC is Dell M1210,and the bluetooth module is Dell wireless 355 Module
with Bluetooth 2.0+EDR Technology
Click to expand...
Click to collapse
generally, the incoming serial port for the pc over bluetooth is COM7.
however, sometimes it is not available to select in activesync or wmdc(for vista).
you can try to set it manually. try the followings:
- if your PC and phone is already bound over bluetooth, delete the relationship.
- start -> run -> regedit (enter)
- go to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services
- you will see a REG_SZ (string) value named as "SerialPort". change it to COM7
- reboot the PC. try to bind over bluetooth again. this time you should see "ActiveSync Service" not "Serial Port" during the binding process. start the binding process from your phone, not from the PC.
if the incoming serial port is different than COM7, then use it. I am sure there is something in the control panel to let you add/delete/modify that setting. check it before starting.
good luck.
gokhanmoral said:
generally, the incoming serial port for the pc over bluetooth is COM7.
however, sometimes it is not available to select in activesync or wmdc(for vista).
you can try to set it manually. try the followings:
- if your PC and phone is already bound over bluetooth, delete the relationship.
- start -> run -> regedit (enter)
- go to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services
- you will see a REG_SZ (string) value named as "SerialPort". change it to COM7
- reboot the PC. try to bind over bluetooth again. this time you should see "ActiveSync Service" not "Serial Port" during the binding process. start the binding process from your phone, not from the PC.
if the incoming serial port is different than COM7, then use it. I am sure there is something in the control panel to let you add/delete/modify that setting. check it before starting.
good luck.
Click to expand...
Click to collapse
It's ok,also need to del the unused serial port
Thank you
Hello
I've managed to select the incoming port in Activesync to COM6
and set the outgoing port on my S200 to COM6
but the pda is reporting that he doesn't find a computer that supports Activesync, although they are paired
I'm using the Widcomm stack
the widcomm program is reporting these 3 services are available on the pda:
- Connect NPA & Dialup & voice Gateway, serial port is not one of them
Hello to all,
I bought the following unit...
T090A BMW E92 Auto Panel Android 4.04 Car PC DVD with Wince6.0 GPS 3G WiFi Bluetooth ipod support 1.2G Dual Core and 1G DDR2 Memory
Wince6 works properly now, and at the beginin android too, the problem is that now Android system dont start, seems to start to load but remain in the load screen with "android" word animated ...
What can I do? install android again? how?
Thanks a lot
i forgot: of course I dont know what bottons press to enter in recovery mode or similar.
can someone help me?
thanks in advance
Hello, first time in the forum. Today I rooted my OP3 and one of the bigest reasons was sixaxis controller to configure PS4 controller on it. But i've tried and it gives the following message:
Getting bluetooth address...
Attempting connection method 1 ...
Driver Starting...
Error: Failed to configure bluetooth
Getting bluetooth adress...
Attempting connection method 2...
Driver Starting...
Wrong number of ports were opened
Error; Failed to configure bluetooth
Getting bluetooth address...
and it freeze there.
If anyone could give me a solution to this i will be very thankful
Same Here. Since i updated to Oreo Theres No Option to activate Sixaxis and the Same Error Codes Show Up. I tried to Change the Bluetooth options in the Development settings And still No luck. Im pretty Sure this is a bug of the Software and when Oreo 8.1 comes Out for Oneplus it should be fixed.
Hey guys, please let me know if you managed to fix the sixaxis on oreo. I've installed the updete on my OP5T, wiped the system cache and tried to pair the DS3 with no luck. I was using Super Su so far yet this time i decided to go with magisk (i don't know if it makes any difference). in my case there is no freeze. The app goes through all the available methods where on nougat it performed the first method and i was good to go. I am considering downgrading to nougat for now.
Here is the log from the app:
Quick Start:
- Pair controllers via USB using supplied utility
- Use 'start' and 'stop' to toggle driver
- Press power button on controllers to activate
- Change input method to 'Sixaxis Controller'
- Check 'help' menu for detailed instructions
Getting bluetooth address...
Attempting connection method 1...
Driver Starting...
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 2...
Driver Starting...
Wrong number of ports were opened
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 3...
Driver Starting...
Could not find stack manager interface in library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 4...
Driver Starting...
Could not load bluetooth library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 5...
Driver Starting...
Could not load HCI library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 6...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 7...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Attempting to close server...
Restoring previous bluetooth state...
Disconnected
Yep I know how to fix this Problem but it is going to annoy Most of The people. The Problem ist The Software. (Not sure If only one plus) but The Android Version 8.0 has issues with Bluetooth. I realised IT after Installing a different Rom (Android 8.1) and Sixaxis Works fine there. So The solution would ne to install a Different Android Version. Didnt find any Other fixes yet
Fix
There is no settlement, all just talk a lot. Hate with this situation . Dog
somebody please provide a solution for poco f1