Ok the hungry ghost festival is still way long to go. Do u guys experience BT LCD automatically blinks out of sudden for 2 times or more itself although you are 100% sure the BT is turned OFF!!!
I'm sure i switch off the BT but while playing around with the xda2, the BT LCD blinks (2 times) itself..This is very annoying.
Could it be the radio stack i'm currently using got to do wif this bizarre situation or anyone of you has the solution for it...
IF my suspect is true than what version of RAdio stack should i apply?
Thanks
Just to revive an old thread which need a solution.
Anyone can probably help?
Thanks
Related
I did search for this issue, but didn't find anything that matched my issue.
I have the latest Mighty Rom for Touch Pro. It's been working beautifully until recently. I usually keep my phone in my pocket with the screen turned off (locked). I've noticed lately that the screen keeps turning on without any interaction. I've gone through configurations to turn off screen blink for notifications and it still keeps coming on. This is driving me nuts, as it's draining my battery much more than it would if the screen would just stay off until I turned it on.
Any suggestions?
lauch said:
I did search for this issue, but didn't find anything that matched my issue.
I have the latest Mighty Rom for Touch Pro. It's been working beautifully until recently. I usually keep my phone in my pocket with the screen turned off (locked). I've noticed lately that the screen keeps turning on without any interaction. I've gone through configurations to turn off screen blink for notifications and it still keeps coming on. This is driving me nuts, as it's draining my battery much more than it would if the screen would just stay off until I turned it on.
Any suggestions?
Click to expand...
Click to collapse
Do you have BT on? It could be that it is waking up because of communication between the device and a BT device.
Also will wake up when switching radio antennas. Maybe you are in a low coverage zone?
Wish I saw this thread before I posted this:
http://forum.xda-developers.com/showthread.php?t=682649
Sorry about that.
I have the exact problem. But I've had it with multiple ROMs, and even the stock Sprint ROM (original, and even after the firmware update). I've been suffering with this "wake up" for well over a year now. Pissing me off.
To answer the questions above:
No, I do not have bluetooth on.
I have a strong 3-bar signal at all times (3 bars under WM 6.5). The ANT is less than 500 feet from me, up on a water tower. My phone even has a clear line-of-sight to the ANT!!!
I have same isue!!!
Same exact issue, it's been going on since the day I bought the phone, when it came out. I gave up on trying to fix it
My hd2 proximity sensor is not working (or i think so at least). When i bring my phone near my ear while phoning it's not turning the screen off. I tryed it with my finger too (the sensor is located left of the speaker) and again nothing happened. Is there a registry tweak or anything to re-activate it?
I searched the settings and i couldnt find it.
I have quite an issue with mie too but not exaclty the same.
i posted but no one seems to have an answer.
When I dial out a call and take the phone to my ear, the screen turns off ok, but when the person takes the call, the screen turns back on. I have to take the phone away frome my ear and bring it back to be sure the screen turns off again.
I know it's not what you've asked for, but maybe this app can help you decide whether your sensor works or not.
http://forum.xda-developers.com/showthread.php?t=411550&page=8
At the bottom you'll see how many lumens your sensor is detecting.
Goodluck,
Fred
thanks, i'll have a look
nickytheshaft said:
When I dial out a call and take the phone to my ear, the screen turns off ok, but when the person takes the call, the screen turns back on. I have to take the phone away frome my ear and bring it back to be sure the screen turns off again.
Click to expand...
Click to collapse
Hi,
i didn't had this problem with my old 2.07 radio.
The same problem came with the 2.14.
Right now installed 2.15 and the problem is gone.
I use artemis 37 and cht 2.0.
Bye
Marco
My screen is black and it doesnt showing anything but i can unlock it(i hear the unlock sound). I tried flashing a stock firmware and it didnt help.
Does someone know how to fix it?
hardware
So it looks as a hardware problem, mabe with backlight of the display.
What was the last thing that you were doing before that problem (phone fall down, get wet, modify some libs, reload firmware)?
HI
See this, I have the same problem, and my phone is back to consumers service im moment
http://forum.xda-developers.com/showthread.php?t=1939771&highlight=wake
or this
http://forum.xda-developers.com/showthread.php?p=29925139
in case, I try to flash every Rom and the same problem.
I think, the only chance, is to change the motherboard......
good luck, I have no Ray more since 1 month
sorry for my bad english
simon80bl said:
So it looks as a hardware problem, mabe with backlight of the display.
What was the last thing that you were doing before that problem (phone fall down, get wet, modify some libs, reload firmware)?
Click to expand...
Click to collapse
I flashed jj hybrid rom 3.2 and phone got wet a bit but i put the phone on warm and after a half an hour phone turned off and start vibrating.Day after i turned it on and i noticed that touchscreen is working but its black
luka09 said:
I flashed jj hybrid rom 3.2 and phone got wet a bit but i put the phone on warm and after a half an hour phone turned off and start vibrating.Day after i turned it on and i noticed that touchscreen is working but its black
Click to expand...
Click to collapse
hi mate, Do you always play games while you charging your phone? I think that is the cause of the problem, i had a blank screen problem too, but its not really bad bcoz when i push the on/off button on the top then push it again it will display the screen like a normal.And i notice this problem happened to me since i addicted to play a virtual tennis, i play till the battery drain and connected the charger and keep playing the game, after couple of day, then i got this problem. And one more thing, while i playing any games, i always used the home button to reply sms i got then i push the home button again to get back to the game i played.
ponext said:
hi mate, Do you always play games while you charging your phone? I think that is the cause of the problem, i had a blank screen problem too, but its not really bad bcoz when i push the on/off button on the top then push it again it will display the screen like a normal.And i notice this problem happened to me since i addicted to play a virtual tennis, i play till the battery drain and connected the charger and keep playing the game, after couple of day, then i got this problem. And one more thing, while i playing any games, i always used the home button to reply sms i got then i push the home button again to get back to the game i played.
Click to expand...
Click to collapse
its not working screen is still black
Hi, I have a quick question.
My digitizer starts failing. I know in the end it should fails cause most of them need to be replaced but maybe my problem is different.
Most of digitizers are stop working at all or only some parts of it. My digitizer is working fine but ONLY after turning on screen sometimes it's working like using it with wet fingers - it's crazy pointing everything without my control. After turn off and on screen it's working fine until next turning on.
I'm wondering can it be software problem?? I had similar problem in Defy+, leds under hardware keys stop lighting and before sending it on warranty I wiped it and now all working fine.
It's no problem for me to replace digitizer or wipe system but it would be good to know that it can be software problem before buying new digitizer.
Maybe you need to apply the raindrop fix. Been discussed already.
First, thaks for understanding what I mean. (Very poor english)
Second, this is exactly what I ment. I just copied tounchpad.cfg from http://forum.xda-developers.com/showthread.php?t=1467696 and all looks fine now. No mess up on multitouch. I hope it will stop messed up touch while turning on screen, need to test it for a while cause this issue isn't appears on each turning on but ocassionaly.
Anyway thanks for fix. You saved my time (3 hours on wiping and bulding new system) and money on new digitizer.
One more thing. I'm using this phone from few months and everything was ok. The problem appears few weeks ago. So if it is bug in rom it should appears just after I bought it, not after few months. Or maybe it's not factory bug but just error in touchpad.cfg??
Sorry for post under post but I have few more informations.
After testing few days raindrop fix the problem still exist. Fix helped but not fixed problem. Still after turning on screen touch is acting crazy but after first touch it stops and before applying fix it stops only after turning off screen and turning it on.
I reflashed full sbf stock Gingerbread, full wipe including internal memory and still the same problem.
Strange thing I observed is the problem appear only when WiFi is on and it's searching or trying to connect. When WiFi is off or it's connected to router the problem never appears and when I turn on screen and after that turn on WiFi everything is ok. Only when I'm turning screen with WiFi on screen touch acting like crazy.
Is there any chance to fix it or should I buy new digitizer??
Ok, I changed digitizer on warranty and now everything is okay. Funny thing is that I have unlocked bootloader and they changed my digitizer without any problems. Less funny is that they broke both sensors changing it and I had to send My Atrix to Motorola once more after two days to change flex. But now I hope it should be working fine.
So after all it had to be popular hardware problem.
Thred can be closed.
Sent from Motorola Atrix
ok so here's where I'm at in this, 5 hrs in and a Gf in tears cause the last 4 were full of freak outs and her sitting over my shoulder. I replaced the LCD screen on her one x+ but I keep running into an issue. When the navigation light ribbon cable is connected it causes the LCD to stop working but when I disconnect it the LCD starts working again but the nav lights stop, and so does sound from the rear speaker and the vibrator thingy. Any ideas what I'm over looking cause I know it has to be something easy that I just couldn't think of under the pressure and all. Any help would be greatly appreciated.
update
usafandersons said:
ok so here's where I'm at in this, 5 hrs in and a Gf in tears cause the last 4 were full of freak outs and her sitting over my shoulder. I replaced the LCD screen on her one x+ but I keep running into an issue. When the navigation light ribbon cable is connected it causes the LCD to stop working but when I disconnect it the LCD starts working again but the nav lights stop, and so does sound from the rear speaker and the vibrator thingy. Any ideas what I'm over looking cause I know it has to be something easy that I just couldn't think of under the pressure and all. Any help would be greatly appreciated.
Click to expand...
Click to collapse
In case anybody was wondering I used the following video and followed it step by step but am still running into this issue.
*can't post the link but look up injuredgadget HTC one x*
When I can get the LCD to work I can't get the phone to reboot without up plugging the battery (doesn't matter how long I hold down the power button. Is there anyways to get it to hard reset and pick up all the hardware again from scratch? like kinda make it learn what's plugged in? I have to be missing something