I am using Siemens SX-56 (Wallaby) and am trying to fix MMS Problem.
i downloaded mms composer from this " http://forum.xda-developers.com/viewtopic.php?t=18719&highlight=mms+composer ", but every i install it, and then try to run it i get this error message
"cannot find 'mms composer' or (one of it componets).Make sure the path and filename are correct and the required libraries are available"
Can Someone suggest Which [size=18]MMS COMPOSER[/size] will be suitable for Siemens SX-56 (Wallaby).
Your assitance is appriciated.
Thanks
Aamer Sheikh
Can Some one Suggest How To make MMS Settings on Siemens SX-56 (Wallaby) Preferably for Ufone-Pakistan or General Settings.
Related
I have problems with sms displaying received phone numbers instead of names. I have tried soft & hard re-set but it still shows phone numbers insted of names from my contacts.
can someone guide me how to fix this problem. also if i need to upgrade ROM please guide me with the link where to upgrade ROM
following are the current specs.
WALABY
MODEL SIEMENS SX56
ROM VERSION 3.17.03 ENG
RADIO VERSION A.20.10
PROTOCOL VERSION 324e4
Help is desperately needed
Thanks in Advance
Aamer Sheikh
E-mail: [email protected]
This is an old fashioned Problem with the PocketPC 2002 ROMs. There is an fix from Paragon Software. You can get it there for free....
OR it´s fixed in the WM2003 ROMs.
You can cook your own at http://lumpistefan.dyndns.org/
HTH
Stefan
Hang on though - you have rom 3.17 which should have that fix built in.
My guess is that your mobile numbers aren't stored in the mobile number field within Contacts. Cut and paste them over and all should be well.
JD
You'll find the fix here:
http://www.yorch.net/apps.htm
Its called Paragon Software SMS Name Fix
Or download the file directly from here:
http://www.yorch.net/downloads/SMS fix.zip
8)
Problem may be that mobile numbers in contacts have to start +44 (in the UK) and drop the leading zero.
May also need to load them into SIM using SIM manager (not sure on this point!).
I am using Siemens SX-56 (Wallaby) and am trying to fix MMS Problem.
i downloaded mms composer from this " http://forum.xda-developers.com/viewtopic.php?t=18719&highlight=mms+composer ", but every i install it, and then try to run it i get this error message
"cannot find 'mms composer' or (one of it componets).Make sure the path and filename are correct and the required libraries are available"
Can Someone suggest Which MMS COMPOSER will be suitable for Siemens SX-56 (Wallaby).
Your assitance is appriciated.
Thanks
Aamer Sheikh
Can Some one Suggest How To make MMS Settings on Siemens SX-56 (Wallaby) Preferably for Ufone-Pakistan or General Settings.
http://forum.xda-developers.com/viewtopic.php?t=12299&highlight=composer
you need to install some cab file from xda2's which include some cam dll.s which are required to run the program
But my Siemens SX-56 does not have a camera
do i still have to load the camera DLL file
regards
aamer
yeah the mms composer require the dll
The Installation is still not working
First I installed MMS 1.6.0.14WWE
Then I installed Default_Caller
Finally installed Camera_WWE.sa
Please confirm the method was correct.
If it was correct why i am still getting error message
Regards
Aamer
sorry i never tried it myself
guess you could try msg'd some of the people in the threads i gave you url's to
Hello :
How can i upgrade my HTC TyTN with the imate rom ?
I only get 99 % ....everithing works after that ....except mms... that ive notice.
Any ideas ?
Luis
The upgrade stopped because same cabs need a Imate IMEI....
You need to put the extended memory in the card, soft reset when the fist installation stop, an install manually tha cabs yuo need from the card.
I solved also the MMS problem.
I suggest to use fit4cat tweaker to show the TyTn EXT_Rom content. Save the MMS cab on your computer, then Upgrade to I-Mate rom (look at Wiki, http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades )
During I-mate personalizzation the phone will "freeze"... don't worry just soft reset. just config date, time zone, international setting, then install the TyTn mms cab an configure the MMS
TyTN MMS Ext. Rom CAB File
As I was not aware that the iMate MMS CAB was only installed to specific IMEI devices I did not save the TyTN Ext. Rom to my PC before installing the imate JasJam ROM.
Does anyone have a copy of the TyTN MMS CAB file to save me having to re-install the HTC (QTEK) ROm and then save the file and then install the JASJAM Rom?
Thanks
Mike
Re: TyTN MMS Ext. Rom CAB File
all extended roms are here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms
Thanks for that -
I have seen how to unhide the Extended ROM folder and have succesfully done this, however if I try to delete some of the unwanted CAB files I get a message saying the disk is write protected and if I try to copy the TyTN CAB files to the Extended ROM I get he same message - does anyone know how to 'unlock the Extended ROM?
Thanks
#EDIT#
I have installed the CAB in the Temp folder and run it from there - I know have MMS, I then re-ran the Orange CAB and it installed all the correct MMS Settings. I would still like to remove the unwanted CAB files from Extended Sotrage and install the TyTN ones I do want, so if anyone has any idea I would appreciate it. Thanks Mike
If i soft reset before any customizations after a hard reset....and i install cabs from extended rom manually. Will this take up more main memory than if it had installed/customized on its own?
paulesport said:
If i soft reset before any customizations after a hard reset....and i install cabs from extended rom manually. Will this take up more main memory than if it had installed/customized on its own?
Click to expand...
Click to collapse
no, it will take the same amount of memory.
mike.bradshaw said:
I would still like to remove the unwanted CAB files from Extended Sotrage and install the TyTN ones I do want, so if anyone has any idea I would appreciate it. Thanks Mike
Click to expand...
Click to collapse
Try using fit4cat, il should work..
http://forum.xda-developers.com/viewtopic.php?t=61060&highlight=
BT fixed?
Just curious, does this upgrade fix bluetooth issues, like A2DP skipping?
after a soft reset mms desapear
Hello :
I have upgraded to jasjam rom...but i cant get mms ...
I click on Default_MT_Shortcut-MMS-Hermes.CAB but after a soft reset desapear.
I have extended rom visible...
Help wil be gratefull
Thnks in advance
after a soft reset mms desapear
Hello :
I have upgraded to jasjam rom...but i cant get mms ...
I click on Default_MT_Shortcut-MMS-Hermes.CAB but after a soft reset desapear.
I have extended rom visible...
Help wil be gratefull
Thnks in advance
after a soft reset mms desapear
error
Solution to MMS Problem in TyTN->I-Mate Rom Upgrade
1) download from http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms TyTN Extended Rom
2) Unrar the file, copy the file named MT_Shortcut-MMS-Hermes.cab anywere in your TyTN
3) Run in your phone the file MT_Shortcut-MMS-Hermes.cab and MMS will be in your phone again.
4)if isn't the same used for internet, config the MMS access point (APN) in start menu>settings>connections tab, then connections icon, click the tab Advanced, select network, New, add and conf My MMS network (APN, Username, Password)
5) Go to Messaging, MMS and config MMS parameters (gateway....)
6) Try your Internet UMTS-GPRS connection, if your phone try to connect using the MMS connections, tap on settings and restore My ISP connection as default for internet. (Stupid software, it automatically try to use the last network configured...... )
Thkns but already try with the cab from dopod and and htc.
I upgrade again with complete upgrade with rom form htc and is working.
To bad o cant use imate.
Hi, I've upgrade from the Moto (920/925/1000) phones on the 3Aus network and while I've done lots of upgrading on these platforms I'm a NOOB on the Dopod.
I've read the FAQ and searched the forums and the wealth of info makes the Symbion stuff look tiny....so any advice from 3Aus users on what ROM (or other) upgrade is the go would be terrific. I've got the latest official release and updates flashed already from the DopodAsia site but notice that:
1) I don't have the "band" tab
2) the inbuild voice navigation is utterly terrible (at least for on Oz accent)
Thanks
Nathan
nathan im from OZ and have modified my Dopod... but i really insist on reading the wiki first before you make any changes and you are awake of its consequences if anything was to fail...
Thanks - I've read the Wiki and would look at upgrading during the W'End (so I am not rushed). Just wanted to hear some feedback from a "local"!
Nathan
no worries.... i suggest you read this first before you do any changes http://forum.xda-developers.com/showthread.php?t=294012&page=1
mate, I'd look at walshie's sig for some hints
I'm waiting for the x-series in aus to be available before I sign on and get a dopod 838pro as well. So I'm interested in following this thread.
Hi Nathan,
I'm a Three user, based in Melbourne but in Newcastle a fair bit too, and I've flashed my Dopod to the latest HTC AKU3.3 test ROM, including the radio update. Make sure you use the unlocker/superCID first . I'm getting great reception with this latest radio ROM, and the OS is nice and fast too.
You'll have to put the settings for 3Services (thats whats used for the Three website, and email) and the 3MMS settings back in, but its not too hard.
As far as voice recognition, MS Voice Command 1.6 with the fixes from the thread in the "Hermes" forum works fine with an Aussie accent.
Thanks - I've chosen at this stage to stick with ROM Version 1.30.707.4 but flashed SuperCID and upgrade to Radio Version 1.27.00.00 (GER). So far so good!
Good to hear! I'd still reccomend running AKU3.3 test though - its really a great upgrade! I'm a heavy user of mine and its not let me down as often as 1.30.707.4 did.
Out of interest, did you get the reply to the email you sent me? Sometimes Hotmail puts my domain in the junk mail box, just curious to know if it got through OK.
Thanks Kevin, I'm actually re-flashing as we speak as I found that after the SuperSID & Radio upgrade to 1.27 my Dopod "froze" several times today when the screen was off requiring a soft reset.
Couple of Q's:
1) Do I need to re SuperSID after flashing with "RUU_Hermes_HTC_WWE_2.05.255.1_6275_1.34.00.10_108_Test" (is this AKU3.3)?
2) Do you know what are the "3 Australia Settings" I need to re-enter
Thanks
Nathan
PS It was not me on any e-mail!
with the latest flash your installing, is internal GPS enabled??
jmone said:
2) Do you know what are the "3 Australia Settings" I need to re-enter?
Click to expand...
Click to collapse
(coss post with Aussie3G)
I've got Phone / External Web / SMS working fine, but am having trouble with the MMS setting and e-mail - i've entered the following info for the WAP account manually - any ideas for "Three in Australia"?
Server Name: 3MMS
Gateway: 10.176.57.25
Port#: 8799
Server Address: three.net.au:10021/mmsc
Connection Via: The WAP Network
Sending size limitations: 300kb
Wap Version: WAP 2.0
Thanks
Nathan
OK got the settings going using:
Messaging =========================
MMS ***********************
Server Name: 3MMS
Gateway: 10.176.57.25
Port#: 8799
Server Address: http://mmsc.three.net.au:10021/mmsc
Connection Via: Work
Sending size limitations: 300kb
Wap Version: WAP 2.0
3Mail ********************
Account Type: IMAP4
Incoming Mail: mail.three.net.au
Outgoing Mail: smpt.three.net.au
Domain:
Connection: Work
Connections ========================
3Netaccess******************
Enter a name for the connection: 3Netaccess
Select a modem: Cellular Line (GPRS, 3G)
Access point name: 3netaccess
User name:
Password:
Domain:
Advanced (nil)
3services******************
Enter a name for the connection: 3services
Select a modem: Cellular Line (GPRS, 3G)
Access point name: 3services
User name:
Password:
Domain:
Advanced (nil)
Just confirming those are the right settings. Remember you can change the name for the connections to make them easier to recognise - I called 3services Planet 3, and I didn't put the Netaccess connection in at all as I do not use the data packs (nor do I wish to until they get cheaper!).
You don't need to SuperCID/Unlock again; it sticks.
jmone said:
Thanks Kevin, I'm actually re-flashing as we speak as I found that after the SuperSID & Radio upgrade to 1.27 my Dopod "froze" several times today when the screen was off requiring a soft reset.
Couple of Q's:
1) Do I need to re SuperSID after flashing with "RUU_Hermes_HTC_WWE_2.05.255.1_6275_1.34.00.10_108_Test" (is this AKU3.3)?
2) Do you know what are the "3 Australia Settings" I need to re-enter
Thanks
Nathan
PS It was not me on any e-mail!
Click to expand...
Click to collapse
1. It doesnt really matter anymore as we have the SSPL tool which allows up to reflash nbh rom without having to change the CID
2. Sorry dont know them...
chingy213 said:
with the latest flash your installing, is internal GPS enabled??
Click to expand...
Click to collapse
which latest flash?? all shipped rom upgrades for the hermes do not have the GPS enabled... you need to use a Radio ROM from the Trinity....
Does anyone have the 3 settings and optus settings in a cab at all?
Cheers
Hi Guys, Does anyone know where i can get a cab file for automatic network connection (GPRS and MMS settings)?