Related
The program XDAunlock doesn't get then unlock code (message: see above). What can I do?
Which ROM-Version have you installed?
Try follwing this:
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz
Stefan
Yes, I tried this program too, but it doesnt run, message: " 'XDA-developers-SER-v12' is not a valid pocket pc-program". My ROM-version is 3.14.16 GER.
With this ROM VErsion you can not use the unlock tool. You have to flash a new ROM to your device, or stay locked.
For flashing the XDA-Developers ROM, connect your Device via ActiveSync to your PC and run the XDA-developers-SER-v12.exe on your PC. That will flash a new ROm and on the first boot it will unlock your device....
Stefan
Great! It works! Thank you very much!!
Hi all -
Newbie here, so I'll apologize upfront for any errors. I've been searching for the last 6 hours and have learned a lot, but still can't fix my problem.
I tried to upgrade the radio only, but after that there is no radio version, no phone or internet, system on mda is VERY slow, and I can't connect to active sync. I can get bootloader up, but when I try to install the stock rom I downloaded from this site, it says "no device connected." I've tried to copy it to an sd card and install from there, but that doesn't work either.
Any help would be MUCH appreciated.
Thanks in advance!!
Have you tried this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
Thanks for the try, but says activesync not connected when I
Hello -
Tried this, but it says I need active sync. Not sure what to do now.
Thanks for the try : )
Flashing with SD-Card do not require any Active Sync. So when did you get this error?
Stefan
I guess I'm not sure how to flash from an SD card then..
sorry.....could you walk me through it?
Here's what I did. Per the instructions on the link, I downloaded the special rom 1.1. Then I stated bootloader on my mda and ran Programme A on my pc from the files that were unzipped. When I do this, I get an error message that says "Cannot execute the remote communication program. Please make sure that the USB/Serial Cable is properly connected." The usb cable is connected directly to my pc.
I know it can connect with the mda, because when I try to install this program T-Mobile 2.24.10 Radio Only it says it updates on the MDA, but nothing changes.
I'm really stuck and appreciate your help.
Re: I guess I'm not sure how to flash from an SD card then..
lorigar said:
Per the instructions on the link, I downloaded the special rom 1.1.
Click to expand...
Click to collapse
This step is ok.
lorigar said:
Then I stated bootloader on my mda and ran Programme A on my pc from the files that were unzipped.
Click to expand...
Click to collapse
Why doing so?
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
descibes how to flash the device via sd-card......
lorigar said:
When I do this, I get an error message that says "Cannot execute the remote communication program. Please make sure that the USB/Serial Cable is properly connected."
Click to expand...
Click to collapse
That´s normal, because in bootloader there is no communication via activesync possible
lorigar said:
when I try to install this program T-Mobile 2.24.10 Radio Only it says it updates on the MDA, but nothing changes.
Click to expand...
Click to collapse
I think you´re mixing files form different devices. I do not know any Radi Version 2.24.10 for the Wallaby....
ALos the attached file is for the wizard device and not for wallaby.....
Stefan
Also a newbie who is stuck
I've installed program A on my SD card. Then i insert it into my device (MDA Vario, T-Mobile (Wizard)) and follow the next step.
Hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
But I don't get taken to that screen, instead it starts up to my windows 5.0 (very slow) without connection to active sync. How can I reboot, install new software?
please help
Re: Also a newbie who is stuck
dixan said:
I've installed program A on my SD card. Then i insert it into my device (MDA Vario, T-Mobile (Wizard)) and follow the next step.
Click to expand...
Click to collapse
FIrst of all the PRogramm A file isnßt just coüpied to the SD-Card and run from there, but it´s copied in special format to the SD-Card....
Second, and most important, that´s just for the Wallaby device and not for the Wizard. This process will never work with your device.
You should take a look at wizard postings....
Stefan
hi
I need your help to fix my O2 Atom Exec.
i wanted to upgrade my ROM in to the WM6, at the bigining i copied the "diskimage_Ver.nb0" & "EBOOT.nb0" on my memory card. and got my Atom Exec into the bootloader , after download complited the LCD got dark, i got it on bootloader and start the "Device Software Update Utility" and clicked on "Next" until "Upgrad" was shown.When I clicked on "upgrade" this error was shown:"CONNECTION ERROR" . What should i do to fix it?
Thanks.
I'm looking for your answer.
donot ever try thru SD card.. there is a chance that you may brick your device.
Goto bootloader mode first then u run DSUU.
Now after i did that, it dosent work with DSUU .it show "error connection".and my divice shows the upgrade fail
How many files you have in the upgrade directory? Normally it should contain 6 files:
- Device Software Update Utility.exe
- diskimage_Ver.nb0
- EBOOT.nb0
- ExtendedRom.img
- nova_pda_033105.mot
- vl1d_pda_Ver.mot
It will always shown connection error if one of these files is missing
I have all of them,
It seems feasiable to full downloadig the Rom from SD(memory card), but i need mor files:
"diskimg.nb0 , eboot.nb0 , dm.nbo , flash.img , agent.mot , mot.mot , CPLD.img , assetInf.img , extended.img , Mdoc.img"
If it's possible to upgrading with them how can i rech them ?
hello...!!!?
can enybody help me with this case? I need Your Help. Please. . . .
shaemna said:
hi
I need your help to fix my O2 Atom Exec.
i wanted to upgrade my ROM in to the WM6, at the bigining i copied the "diskimage_Ver.nb0" & "EBOOT.nb0" on my memory card. and got my Atom Exec into the bootloader , after download complited the LCD got dark, i got it on bootloader and start the "Device Software Update Utility" and clicked on "Next" until "Upgrad" was shown.When I clicked on "upgrade" this error was shown:"CONNECTION ERROR" . What should i do to fix it?
Thanks.
I'm looking for your answer.
Click to expand...
Click to collapse
Why did you do this?! No one gave out instructions to flash anything using SD CARD in the first place! Of course you will get connection error because bootloader is not functioning. Remove your SDCard, start bootloader mode, and flash the normal way.
I did that but it's not worked. and got me "error connection", i saw some where that if i do it in the that way (with sd) it's worke and beacuse of that i did it in that wey, now what should i do? how can upgrad my ROM or downgrad it, my divice is alredy ded, how can i get it alive? help me
shaemna said:
I did that but it's not worked. and got me "error connection", i saw some where that if i do it in the that way (with sd) it's worke and beacuse of that i did it in that wey, now what should i do? how can upgrad my ROM or downgrad it, my divice is alredy ded, how can i get it alive? help me
Click to expand...
Click to collapse
can you go into bootloader mode?
yes it's go to the bootloader but when run DSUU plase of the last version of the rom and radio is empty, when i click on UPGRAD it get me ERROR CONNECTION
shaemna said:
yes it's go to the bootloader but when run DSUU plase of the last version of the rom and radio is empty, when i click on UPGRAD it get me ERROR CONNECTION
Click to expand...
Click to collapse
I'm sorry. I don't get you. You can go to bootloader, but you get an error. Can you post a screen shot of the error? so, I will know what to do.
How can I uplod picturs?
server is busy it get me Network Error (tcp_error) and cant upload it
the doucument of it is:
(the upgrade page)
Your Divice software is about to be update from:
divice CE image version:0
divice Radio image version:
to:
CE image version: 7210621
Radio image version: R060711N-MN2ARC-RS00011
.......
PLEAS CLICK update to continue
when i click upgrade it show me the fowloeeng error
ERROR:CONNECTION ERROR
THE DIVICE SOFTWAR UPDATE IS HAVING TROUBLE CONECTING TO YOUR DIVICE
PLEAS CHEKE
1)YUOR DIVICE IS PROPLY CONNECTED TO THE USB CABLE OR ...
.
.
.
now what should i do?
do you have any other USB to mini-USB cable? try changing it... The ones used for SD Card readers or Digital Cameras are the same, and do it again.
i do that in all of my USB ports and they are same and get me error conection again
Is there any wey else to inistall a ROM on my divice?
1) Is windows recognizing your device?.. (Do you have activesync installed?)
2) Did u try using different USB cable ?
3) Are you logged on as administrator?
4) Did you remove SD card before going to bootloader mode
5) What is the screen content when you go to boot loader mode
6) Before connecting the device go to bootloader first, then connect the device and then run DSUU
7) Activesync may install device drivers for your device so try installing activesync?
Thanks
when i get my divice in to the bootloader it's display:
===========MN2 Bootloader=
Jun 13 2006 20:41:44
copyright (c) 2006 Quanta cor
poration
CPLD Ver: A0060109
***********************
*Using '<-','->', 'Enter' *
*to choose what you want *
***********************
(1)debug module through UART
(2)jump to DM
enter your selection:
when i conect it to pc( as administrator user) the fallowing line was shown:
USB connected , waiting for download command...
and my computer beeping and found new hardware but not connected to activesync(4.5) , then i start DSUU and when start to upgrade computer show me "ERROR CONECTION" and my divice show me this note:
! ! ! Please use DSUU in OS mode and sync with pc first ! ! !
Usb transfer Fail
please help me
1. We get the most first sewing of Xda-atomexec-eng-20060614_r060428n_ex0028.exe (only by this sewing restore was able)
2. We drag out the files of eboot.nb0
3. We copy on miniSD in a root directory.
4. We insert miniSD in Pocket, enter in bootloader (Camera+SR)
5. We wait inundated while.
6. We take out a miniSD, enter in bootloader, start sewing on PC, connect to USB (it is needed to put to death in the processes of AS)
We are sewn!!!
Hi all.
I tried to update to WM6 on my Dopod 818 Pro with ProphetTouchIXbeta2. It displayed and error and after hard resetting I can only get the splash screen. So I roamed the forum the whole day downloaded a couple of other WM6 packages (I could not get the WM5 files from the WM6 upgrade guide, link is dead). So I downloaded the ROM updates from the HTC websites for the 818 Pro. I can start the 818 Pro into Bootloader, but whatever ROM file I use will tell me Update Error 260 Cannot connect!!
The Bootloader tells me the following: IPL 2.15.0001 / SPL 2.15.0001 and USB connected. Active Sync will not connect.
Sorry, I am a newbie and should have waited for the official upgrade. But I had to try
Thank you in advance for any help!
Cheers,
Markus
Hi,
i had the same trouble some time ago. The false was, that I connect my NEO on an USB Hub, take a direct connection between your PC and your XDA. Also, if it's possible, try another PC. HTH
Put your Prophet in bootloadermode: press Camm button and soft reset at the same time.
In ActiveSync on your PC: DISable connectionsetting "Allow USB connection"
Conect your Prophet to a USBport directly with a cable.
Run a NVID-RUU, perhaps the official VID-RUU doesn't recognize your device anymore.
This should do it.
i can confirm this process
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
starkus said:
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
Click to expand...
Click to collapse
Activesync is not supose to conect to phone in bootloder
just run the wm5
Thanks,
but if I run the WM5 by HTC its only goes to the Verify information screen and after that. it says Error [260]: Connection. The Update utility cannot connect to your PDA Phone.
And in the beginning of the process it displays a couple of steps, like check that your battery is at least 50% charged and other ssteps, of which one is, that I have to make sure that ActiveSyc is connected.
Cheers,
Markus
Solved
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
starkus said:
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
Click to expand...
Click to collapse
which one was "full of viruses" and how you checked it ?
Sorry should have mentioned it before:
It was Prophet"s_2.20.7.34_2.20.7114_02.69.21
Virus or unwanted program 'W32/Sality.L [W32/Sality.L]'
All .exes were infected in that package.
Cheers,
Markus
I installed an "updated" HTC Home Screen Plugin (obviously not for my phone model #) and now my phone is frozen. It will boot up but the home screen is frozen (i.e., non-responsive to any button presses). I attempted to re-flash the ROM using various ones I found for the NEON but all fail for the same reason.
Specifically, connection to ActiveSync is not possible (I connect via USB cable but ActiveSync doesn't recognize device). So what I do is put the phone in bootloader mode and then connect the USB cable. When I do this, the ROM upgrade program recognizes the phone and gets to the point where it shows the screen "Updating the ROM image on your PDA Phone.." and the phone shows a status bar at 0%. However, after a minute the computer screen says "ERROR [262]: UPDATE ERROR" and the phone is stile stuck at 0%.
My question is if there is any other way I can re-flash my NEON300? I've heard that it may be possible to but the nbh file on a FAT32 formatted card. I tried this by naming the nbh file to "TOUCHIMG.NBH" and "NEONIMG.NBH" but neither are recognized by the bootloader.
Thanks in advance for any assistance.
Try changing usb port or even re-installing activesync.
Alot pf people had the same problem on different devices but the cause should be the same.
for example, http://forum.xda-developers.com/showthread.php?t=298516
Let me know how you go.
Thanks for the advice Seth. I followed the link (install/re-install of ActiveSync didn't help) and I think I found my problem. Do I need to CID unlock the phone to install the ROM's? I ran the type 32 command from mtty and it shows a value of FF for the security lock.
Thanks
wangobyte said:
Thanks for the advice Seth. I followed the link (install/re-install of ActiveSync didn't help) and I think I found my problem. Do I need to CID unlock the phone to install the ROM's? I ran the type 32 command from mtty and it shows a value of FF for the security lock.
Thanks
Click to expand...
Click to collapse
You should have read the WIKI before flashing your device... http://wiki.xda-developers.com/index.php?pagename=Flashing Guide and here http://forum.xda-developers.com/showthread.php?t=355730