I was downgrading version from 2.06 - 1.72 n suddenly power went off when i repeated the same procedure only O2 Xda on front screen i tried to do master reset again tried to sync with pc same result O2 Xda on Main screen Please Some One help me?
Related
Please any one come across Error 101:Connection Error in HimaUpgradeUt.exe ? I was using Tmobile 1.72 beta and trying to upgrade to imate 1.72 Official, the upgrade program started, and hang at 40%, forced to reset, and my O2 hang at O2 Splash screen.
I tried hard-reset, and still hang at O2 Splash screen, and when I try to reinstall/upgrade/download, the upgrade program prompt me this error 101:connection error, any one have this before.
Please help, thanks
Reset your device into bootloader (arrow any direction + power + soft reset)
Disable any firewall you may have on your PC (I have had problems with ZoneAlarm)
Restart the upgrade program
I had a problem with Zone Alarm as well. I didn't need to hard reset, though.
Hi guys, thanks for your speedy reply. My friend do not have the patience to wait, so have send to service centre in Singapore and they have help him to solved the problems and with O2 1.66 ROM (FOC)
Thanks guys, you are great, and great forum
i have an o2 xda 2 that hang on power up at O2 screen then stuck there
i had tested sw reset and even hardware reset but same
i had flashing the rom also but still same
any bro out there who might be able to help me pls
Are you also getting GSM error?
not only gsm bro, with or without sim also when power on stuck on O2 screen
You could try flashing a new rom using sd card method then address any other issues once you get a working pda. One other thing is try removing battery overnight.
I have same issue. Even I have unplug the battery overnight. It is same. I try to download the offical ROM from seeO2 website and upgrade the ROM. (It can upgrade via service mode only.) But it get a error 114 when the upgrade in Radio ROM. After that the screen is same at O2 starting screen and hang (can't off the device).
Please give me help and advice.
Rambo
I only see the OS ROM version (1.60.00WWE) when the device startup and display "No GSM".
Please help!
Not a good day, my m3100 arrived unlocked via imei check. worked fine.
upgraded to the imate rom installed o2 cabs no problems everything worked ie wifi could make calls etc. Now just noticed device with dim screen with windows mobile logo. tried hard reboot nojoy comes up with HTC logo then imate then screen dims back to the windows mobile.
Please can anybody help?
Have you tried to hard reset? if yes, have a look here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Its back!!! thanks a lot but for how long?
First im sorry if this has been asked before
but i already search and tried the solution and still unresolved
i have dopod 818pro that stuck and 2nd Splash Screen
G4 with ipl 2.15.0001 and spl 2.20.0001
Now i already tried to upgrade using original rom dopod 818pro (RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe)
in the bootloader and its succesfull update but after hard reset
it still stuck at the splash screen
already tried a couple times on a different computer also and its still the same result
after i that i take nerve to upgrade using qtek (RUU_Prophet_220734_2207114_024721_NVID_2.exe)
the update was successfull and the 2nd splash was changed from dopod to qtek
but its still stuck at the 2nd Splash Screen
At different thread a guy suggest to update using PVTemp rom (ROMUpdateUtility_NV_G4.exe) and hard reset.
i download it and try it and its still stuck at the 2nd splash screen.
So please help me guys by giving a solution or
tell me how to get back the 2nd splash screen to dopod
cos maybe i tried to sent it back to original service center.
cos now everytime i update using the original dopod rom it always say "Please use newer nbf" this was after i update using the qtek rom..
Thx guys
Here is my personal experience,dear modifiers,junior members ,administrators and each and every one.
My experience step by step----
one day i bought imate jamin which is from uae.
Eventually i downgraded with aku2 original shipped firmware on that, after that its ok condition of my device.then i upgraded with 6.1 proffesional rom someone cooked.before that i did cid unlocked with unlocker and hspl.thanks to them but it had little bugs in that firm..
Here again i was entered to aku2 official one.here i downgraded with this.
At the end it said on the screen congratulations but no start up only flickering no boot loader,hard reset,no soft reset,i tried lot more than 1000 tricks no help.here i sent this ****ing mobile to some mobile service centre.one month no luck.totally 2months passed away but there is no solution for that.again it came to me.
I started software experiments on that luckily i found some clue that made me joy.through this method.
1.i was taken a charger and cutted its two wires switched to 1and 5 r 6 battery pins of my loved imate.surprised amazing it has white boot screen no tricolor screen only a white boot screen.
Here i was tried lot of original shipped roms more than 30 imate jamin shipped roms but no luck.... 1%.........................80%......95%.....here error 326:invalid command.
Finally i tried one more step that i flashed jamin arabic rom 95%....invalid command.....followed by a all official roms .................
But there is no luck. No boot mode,no ipl spl,no image version, nothing no.....
Finally i confirmed that my imate purely daed purely dead.
Here iam not asking u to help me or save my mobile but people who are going to this exp....
Stop exp.... And save ur mobile
orphansmith
hyderabad
india.
just flash NVID ROM using "Cutten USB technique".........
You'll have ur loved JAMin back...
cheers!!!
Aju
Dear AJU
Can you tell me in detail about cutten usb technique and Link for NVID Rom, because i have the same story about imate jamin and this is my first mobile so that i want to alive this.
Regards
Muhammad waqas