Hi, I have a XDA II TSM 500 (Telefonica) in Spanish versions:
rom 1.72.03 ESN
03/*15/04
1.10.00
1337.18
ext rom 1.72.102
And I have a parrot ck3100 but it doens´t work, I cant uase the parrot I have install the bt tools but nothing, bttools v10.12 and 11.00 but nothing, and the widcomm program but nothing, can someone help me?, must I upgrade the room? what rom?. Thanks
The parrot carkit is one of the few that support the BT headset profile. This profile is the only (speech) one the standard Himalaya roms support.
So . . .It should work. Afaik, you do have to configure the parrot in order to make it support the headset (instead of handsfree) profile.
I think this should be in the manual.
As from 1.72 roms there is NO NEED to use the Pocket Bluetooth Tools for these matters. Uninstall those!
The widsomm stack wont help either, because that one supports a lot of protocols, but it does not support the headset . . .
RE
Thanks but when I syncronice my XDA with parrot in the screen of parrot appear HEAD SET!! but dont appear coberture, battery, agenda, and I cant speek throught the parrot my radio versiono is 1.00, whan I configure the XDA II bluetooth I put the com4 and com5 enable is this right?, thanks.
RE
I tested It again, it puts HEADSET in the screen of parrot, whan I call from XDA II puts bluetooth headset is on but I it dosn´t work in parrot or in XDA II listen nothing, and the sincronice fails after 30 seconds, I downloaded 2 roms from here "windowsmobile2003se.exe", "RUU172601WWE.exe" must I put one of this?, thanks.
I bought a parrot driveblue, it didn't work . I called parrots office and they said me my version Rom 1.66.00 radio 1.10.00 wasn't high enough to work with driveblue, and I see that you still have the same radio 1.10.00. Isn't it that, your problem ?
Look edsub has a OS 1.72.00 and a radio 1.17.00.
If you change with your ESN by a WWE , be carefull with the country error code !
May be I'm wrong and this have nothing to see with your problem.
hi
TOMY00
PLEASE
use himegetdeviceinfo.exe on your device
and give me the informations you found on file devicedata
on windows directory on your pda
please
my device is dead
and i need the operator code from telefonica movistar
thanks
I have one of the first Parrot CK3000 which works fine with a Sony T610 mobile. I have expended hours of effort trying to get to work with an XDAI, an XDAII and a PDA2K (borrowed).
I tried Windows Mobile 2003, 2003se and various BT tools. None worked.
I upgraded my XDAII to Magneto (WM5) and BINGO! works fine now!
Petermcc said:
I have one of the first Parrot CK3000 which works fine with a Sony T610 mobile. I have expended hours of effort trying to get to work with an XDAI, an XDAII and a PDA2K (borrowed).
I tried Windows Mobile 2003, 2003se and various BT tools. None worked.
I upgraded my XDAII to Magneto (WM5) and BINGO! works fine now!
Click to expand...
Click to collapse
ck3000 here worked almost fine with MDA1, MDA2 (original) and MDA2 with wm2005. BUT no chance to change the volume of the loudspeakers. are you able to do this?
I finally succeeded to make the HP BT Stereo work with a i-Trek GPS and a Stowaway BT Keyboard. All of this with the widcomm 1.5.0.2000...But,....
no luck with a BT headset Bluetrek G2 it only works with the msBT stack...
It would be very appreciate if somebody could make a stackswitcher like the one which seems to be working with the widcomm 3500...
Is there any chance to get it somwhere ?
Thanks for somebody who can help me...
Re: stackswitcher required for HP BT Headphones + BTHeadset
newworld666 said:
I finally succeeded to make the HP BT Stereo work with a i-Trek GPS and a Stowaway BT Keyboard. All of this with the widcomm 1.5.0.2000...But,....
no luck with a BT headset Bluetrek G2 it only works with the msBT stack...
It would be very appreciate if somebody could make a stackswitcher like the one which seems to be working with the widcomm 3500...
Is there any chance to get it somwhere ?
Thanks for somebody who can help me...
Click to expand...
Click to collapse
heres the stackswitcher .. i only test it with broadcom build3500 and build 3900 under WM2003SE 2.06.00WWE but theoretically it should work with widcomm 2000
you will need to install the Buzz lightyear MS Bluetooth ICON (BL_BT_Icon_service.cab)but incase you want to use the MS Bluetooth Original Icon just ..
Heres how to set to original MS Bluetooth ICON
1. open the File Explorer
2. Goto this folder \Program Files\StackSwitcher
3. Then Run DefaultMSBT.exe
4. it will ask you to set to default MS Bluetooth Stack, just click OK
5. Then it will ask you to make a soft reset .. just click ok ..
Now if you want to change it back to Buzz_lightyear MS bt tray icon.. here it is
1. Open the Regedit(Start->Settings->System)
2. Goto This registry Section
HKEY_LOCAL_MACHINE\SOFTWARE
3. Change the value of MSBluetooth to
"BL_BTIcon.DLL"
4. then close the Regedit
5. Set the MS Bluetooth Stack only or Enable Both Stack (Start->Programs->Bluetooth Stack) then click ok to soft reset
or Simply installed again Stackswitcher.02.cab to change back to Buzz lightyear MS Bluetooth ICON the perform step 5 ..
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Thank you for the answer I let you know asap if it is working with widcomm 2000 and 1.72 rom. With 2003se I had many difficulties and it is not so stable for the headphones.
Re: stackswitcher required for HP BT Headphones + BTHeadset
toenailedheres said:
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Click to expand...
Click to collapse
)))))) yeah !!!
in case, you'll need some help, just let me know...
Make sure, you check this out as well:
http://forum.xda-developers.com/viewtopic.php?t=17476
)
buzz
newworld666 said:
Thank you for the answer I let you know asap if it is working with widcomm 2000 and 1.72 rom. With 2003se I had many difficulties and it is not so stable for the headphones.
Click to expand...
Click to collapse
hiya new..
i dont know if the stackswitcher will work in 1.72.rom since it is design for wm2003se .. anyway .. you can try it .. just make a backup first .. :wink:
Re: stackswitcher required for HP BT Headphones + BTHeadset
buzz_lightyear said:
toenailedheres said:
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Click to expand...
Click to collapse
)))))) yeah !!!
in case, you'll need some help, just let me know...
Make sure, you check this out as well:
http://forum.xda-developers.com/viewtopic.php?t=17476
)
buzz
Click to expand...
Click to collapse
yeah i love all your releases .. i mean all of it .. the bluetooth icon .. the skinned keyboard .. your marvelous switch it .. i love it .. and all your application is always part of my xda .. :wink:
n tnx for all of that ..
anyway i already posted my one tiny wishlist .. hope you can make it .. bro ..
Re: stackswitcher required for HP BT Headphones + BTHeadset
toenailed said:
buzz_lightyear said:
toenailedheres said:
but in case you love buzz_lightyear MS bluetooth Icon .. no need to perform the above procedures
Click to expand...
Click to collapse
)))))) yeah !!!
in case, you'll need some help, just let me know...
Make sure, you check this out as well:
http://forum.xda-developers.com/viewtopic.php?t=17476
)
buzz
Click to expand...
Click to collapse
yeah i love all your releases .. i mean all of it .. the bluetooth icon .. the skinned keyboard .. your marvelous switch it .. i love it .. and all your application is always part of my xda .. :wink:
n tnx for all of that ..
anyway i already posted my one tiny wishlist .. hope you can make it .. bro ..
Click to expand...
Click to collapse
THANX man, that makes me really GLAD.. )))
maybe I should start selling that ****.. ))))))))
I have only very little free time at the moment, but I WILL take a look at the wishlist.
)
buzz
Thank you very much for the stackswitch now I can enjoy :
,with the widcom BT stack, some music with the HP BT Headphone while I am on Internet with the Stowaway BT Keyboard and mouse.
with the Ms BT stack I can use the Bluetrek G2 Headset for some phone call while Navigon 4 is leading me to the right place with the itrek BT GPS....
And I don't need any cables... what a joy...
Thanks
Re: stackswitcher required for HP BT Headphones + BTHeadset
buzz_lightyear said:
THANX man, that makes me really GLAD.. )))
Click to expand...
Click to collapse
ur welcome buzz .. just love you work .. n i think i will love your future releases .. :wink:
buzz_lightyear said:
maybe I should start selling that ****.. ))))))))
I have only very little free time at the moment, but I WILL take a look at the wishlist.
)
buzz
Click to expand...
Click to collapse
glad to hear that buzz .. i will just check everyday your thread and see for new update ..
tnx buzz ..
and more power to you buzz and all of your marvelous work and program ..
glad we have a buzz_lightyear in this forum .. tnx for everything .. man ..
newworld666 said:
Thank you very much for the stackswitch now I can enjoy :
,with the widcom BT stack, some music with the HP BT Headphone while I am on Internet with the Stowaway BT Keyboard and mouse.
with the Ms BT stack I can use the Bluetrek G2 Headset for some phone call while Navigon 4 is leading me to the right place with the itrek BT GPS....
And I don't need any cables... what a joy...
Thanks
Click to expand...
Click to collapse
ur welcome and glad i help .. so this means that .. the proggie works in 1.72 .. that was great..
Hi,
very interested. Where I can get Widcomm stack, which is working with switcher? please give me a link...
Sorry dind't write that it is only working with 2.06. I tried with 1.72 but no success so I changed to 2.06 and now it is working perfectly.
Thanks
I tryed it on 1.72 and its seems to work... but I don't know exactly - I charging my Headset at home and I am at work now...
So what do you exactly mean with that "don't working with 1.72"
please describe....
BTW: It seems that my device is slower? How that aplication works?
Mirek
I couldn't switch or make both stacks appear on the same time and just put one on and pair something with it.
With 2.06 rom I can stop the broadcomm stack and use the MS with a BT headset and a BT GPS and when I am in a train whithout ressint I stop the MS and then I can use the Broadcomm with a HP BT Headphone and a BT Keyboard and mouse.
Just the headphones doesn't work in any case with the MS stack and the Headset doesn't work with Broadcomm
newworld666 said:
I couldn't switch or make both stacks appear on the same time and just put one on and pair something with it.
Click to expand...
Click to collapse
I tryed this and its work on 1.72. I had both stack active. I must activate MS stack first, then Widcomm. I tryed to pair Headset with MS and Leadtek GPS with Widcomm and pairing was sucessful....
Yesterday, I tryed new Broadcom 1.6.0 b0600 stack and it may work with headset. in older version, when I tryed to pair headset, it paired with it, but if I tryed to connect it error follows.
In Broadcomm 1.6.0 I tryed to pair (sucess), connect (sucess), run Wm Player and headset icon was changed, my headset beeps. But thats all. The problem is, that there are some new registry settings in .reg file included in 1.6.0. I don't know, how to import .reg file in my XDA. PHM regedit has Import command disabled...
Do you know, how to import .reg file?
Mirek
I use Tascal Regedit. it is a freeware
http://www2r.biglobe.ne.jp/~tascal/download/down.cgi?tre090p
Has anyone tried to configure the HP Bluetooth Headphones with their Himalaya running Windows Mobile 5.0? I don't know if WM5.0 includes the A2DP bluetooth profile. If not, how would I add this to my device? Thanks for any assistance!
Best,
Matt
same question!! isn't there anybody who tried wm5 with hp headset??
argh, there must be a way!!
argh magneto is superb, but without my headphones is only half that fun!
PLZ, PLZ find a solution!!!!!!!!!
cheers k
Is there a manager program like the XDA IIs have?
I need software to be able to get my GPS bluetooth to work with My tomtom 5 but the ordinary pairing doesnt seem to work.
Has anyone got a solution?
Cheers,
Mark.
I have got it to work now, but a better manager program would still be beneficial..
Does anyone know how to fix bluetooth problem of not being able to send files through bluetooth after upgrading a Hurricane SPV 550 phone from wm5 to wm6?
thread moved