Hi,
I have a Logitech Precision PC Gaming Headset http://www.computingondemand.com/reviews/audio-Logitech-PrecisionGamingPCHeadset/page1.shtml and it works great.
So would need an adapter like this to connect it to the Blue Angel -
http://www.pocketpctechs.com/detail.asp?Product_ID=PPCPADPT16
Am I correct that BOTH the speaker ***and the microphone*** are then rerouted to the headset, or does it only reroute the speaker?
Thanks People
I have the same setup. Both connections on the adapter are for headsets only
1 for headset
1 for stereo headset
I contacted them about this and they noted that there may be a need for this type of setup, but had no immediate intentions of changing the config.
Raptor
I have a Logitech Precision PC Gaming Headset http://www.computingondemand.com/reviews/audio-Logitech-PrecisionGamingPCHeadset/page1.shtml and it works great.
So would need an adapter like this to connect it to the Blue Angel -
http://www.pocketpctechs.com/detail.asp?Product_ID=PPCPADPT16
Am I correct that BOTH the speaker ***and the microphone*** are then rerouted to the headset, or does it only reroute the speaker?
Click to expand...
Click to collapse
Well..., I think I have to disagree with Raptor :shock:... I have both the PPCPADPT16 and the PPCPADPT15. The 2.5 side on the 16 does indeed enable the mic on a standard 2.5mm head set and the 3.5 mm side provides stereo sound, but no mic.
I use mine as part of a car kit for my xda IIs. I use the 3.5mm side to plug in a cassette adaptor and feed stereo MP3 sound and the phone through the car speakers. I plug in a regular 2.5mm hands free kit into the 2.5mm side of the adaptor and use that as the mic attached to the door pillar Works pretty well for all up cost of about $45
The 15 works by feeding the stereo sound into the car stereo via the cassette adaptor, while keeping the internal speaker of the XDA IIs enabled. In this way you can play the sound through the car stereo (or any stereo headset) while still being able to answer a call via the xda's mic and listen to the caller over the stereo speakers...
Hope that helps
Regards
Chris
Ah...now after rereading the posts, I think I now understand what you were looking for
You need an adaptor that provides stereo sound and a mic in a single 2.5mm or 3.5mm connector....correct..? In which case neither of these do it in a single connector..
Sorry, misunderstood on the first pass :roll
Regards
Chris
cbrow51
indeed stereo sound and a mic ,
thanks for the confirmation!
/moo
cbrow51 said:
I have a Logitech Precision PC Gaming Headset http://www.computingondemand.com/reviews/audio-Logitech-PrecisionGamingPCHeadset/page1.shtml and it works great.
So would need an adapter like this to connect it to the Blue Angel -
http://www.pocketpctechs.com/detail.asp?Product_ID=PPCPADPT16
Am I correct that BOTH the speaker ***and the microphone*** are then rerouted to the headset, or does it only reroute the speaker?
Click to expand...
Click to collapse
Well..., I think I have to disagree with Raptor :shock:... I have both the PPCPADPT16 and the PPCPADPT15. The 2.5 side on the 16 does indeed enable the mic on a standard 2.5mm head set and the 3.5 mm side provides stereo sound, but no mic.
Click to expand...
Click to collapse
I use mine as part of a car kit for my xda IIs. I use the 3.5mm side to plug in a cassette adaptor and feed stereo MP3 sound and the phone through the car speakers. I plug in a regular 2.5mm hands free kit into the 2.5mm side of the adaptor and use that as the mic attached to the door pillar Works pretty well for all up cost of about $45
Click to expand...
Click to collapse
Chris,
Does your 2.5mm hands free kit comes with its own speaker, too? When you plug the 2.5mm hands free kit into the 2.5mm side to use the mic, does the sound comes out of the 2.5mm hands free kit's speaker also? Or the 2.5mm side only connects the mic and no sound is routed through it?
If no sound is routed through the 2.5mm side then it sounds like the PPCPADPT16 is designed for one to use his own speaker (cassette adapter to car's speakers, etc...) and his own mic (hands free kit,etc... but then one wastes the hands free kit's speaker). Does any body know if there is a mic-only device that can plugs into the 2.5mm side? I couldn't find any, a device that has a mic always come with an earphone. arghh!!!
If there is sound routed through the 2.5mm side, then whenever one receives a call, sound will come from all over the place, louder sound from the car's speakers competing with the weaker sound from the hands free kit's speaker... It sounds distracting!!
I have a feeling the designer meant to add a mic to this adapter so that the 3.5mm side and the 2.5mm side can be used independently. The 3.5mm side for those who wants to use the car's speakers and the adapter's mic... The 2.5mm side for one who wants to use a hands free kit...
The 15 works by feeding the stereo sound into the car stereo via the cassette adaptor, while keeping the internal speaker of the XDA IIs enabled. In this way you can play the sound through the car stereo (or any stereo headset) while still being able to answer a call via the xda's mic and listen to the caller over the stereo speakers...
Hope that helps
Regards
Chris
Click to expand...
Click to collapse
PPC Adaptors and hands Free Kit
Hi Sumtingwong
The hands free "kit" I put together is actually an assembly of individual components I selected, rather than an actual kit.
I use a standard non powered, vent mount holder for the xda 2s and power the device via a standard car charger. The holder does not have any kind of speaker built in. I am currently using the PPCtechs "16" adaptor, with the 3.5mm side plugged into a cassette sound feeder (have also used it with an FM sound feeder as well) and the 2.5 mm side plugged into a standard 2.5mm mono hands free speaker/mic combo. I have the mic part of this attached to the drivers side door pillar. Then, I have MS Voice Command installed on the xda, with the "record" button on the xda mapped to the Voice Command software
So the way it works is as follows.
1. Get into car and place xda in vent mount holder. Attach car charger and PPCTech # 16 adaptor to xda.
2. Turn car radio / stereo on and insert casette sound feeder adaptor (you can use a FM Sound Feeder here instead and tune to the appropriate FM station)
3. Hit the xda "record" button and at the Voice Command prompt say "Play Don Henley" (It's the only CD I have on my SD card right now.. ) The music starts!
4. Then I decide I want to call someone, so, while the music is still playing, I hit the record button again and on the Voice Command prompt say "call Veronica at home". The music stops and the phone dials the number from the contact list.
5. The phone rings and I get her voice mail (she's never at home ) So I hang up and restart the music.
6. Then a call comes in, which interupts the music with the ring tone through the car speakers. I can see who is calling via the xda screen and hit the "call answer" button on the xda to answer the call. My car has volume up and down on the steering wheel, so that its pretty convienent to adjust the volume from there.
7. When the call is done, I hit the "call end" button on the xda and the music starts back up automatically.
It works pretty well. A couple of other things to address your questions.
a. I don't have a speaker built into the xda holder, so sound coming out there is not an issue for me.
b. The 2.5mm headset side does still have the speaker attached, but sound is not a problem as its so low.
c. I too have not found a (cheap) 2.5mm "mic only". I asked the PPC Tech folks if they had or could recommend one. They did not, but their solution was simple and inexpensive...."we find just cutting of the headphone part off the handsfree works well"!!
The other thing I use and love is PocketMax "PhoneAlarm" (www.pocketmax.net) As well as some great alarm functions, this app supports various profiles that control, amongst other things, the input and output sound on the PPC mic and speaker. So I set up the "car" profile with a mic sensitivity and audio output that matches the car stereo best. That way there are no big volume changes when switching from say the car radio to the MP3 music on the XDA (BTW, you can also listen to internet radion on the XDA this way too!)
Well there you go, hope that answers your questions. If not, let me know.
Regards
Chris
@ chris
how do you get internet radio ??? my car doesnt have wifi in it
Hi Zohaer
Via the GPRS connection. Try out this link in Windows media player..web favorites..
http://windowsmedia.com/redir/pocketpc.asp
Its for classicfm.
Regards
Chris
perfect explanation
perfect explanation pretty much covers what i want to do break out the sound from my mda III.
I would like to go one stage further and use a pc stereo headset with my mda III but i think that would require a mono 3.5 socket as well as the stereo head phone socket.
looks like the devices discussed so far are working as a pass through to a 2.5 headset and a stereo 3.5 socket for what ever ...
I've not been on this board long but this looks an ideal thread for a sticky any moderator think its worth while
regards
j
Black Night wrote
I would like to go one stage further and use a pc stereo headset with my mda III but i think that would require a mono 3.5 socket as well as the stereo head phone socket.
looks like the devices discussed so far are working as a pass through to a 2.5 headset and a stereo 3.5 socket for what ever ...
Click to expand...
Click to collapse
Hi Black Night
The 3.5mm socket on the # 16 is for stereo headphones (no mic), while the 2.5 socket is for regular hands free kit with mono head phone plus mic. I agree with post above that a useful addition to the connector range would be a 3.5mm that was stereo and also included the mic. This would allow the use of the gaming headset mentioned above.
For now though you could use the # 15 adaptor. This is a 3.5mm stereo socket that accepts a 3.5mm stereo headset AND also keeps the mic on the device active. With this you can get stereo sound and still communicate wth the xda via its built in mic while the headphones are plugged in.
Regards
Chris
Re: PPC Adaptors and hands Free Kit
cbrow51 said:
Hi Sumtingwong
The hands free "kit" I put together is actually an assembly of individual components I selected, rather than an actual kit.
I use a standard non powered, vent mount holder for the xda 2s and power the device via a standard car charger. The holder does not have any kind of speaker built in. I am currently using the PPCtechs "16" adaptor, with the 3.5mm side plugged into a cassette sound feeder (have also used it with an FM sound feeder as well) and the 2.5 mm side plugged into a standard 2.5mm mono hands free speaker/mic combo. I have the mic part of this attached to the drivers side door pillar. Then, I have MS Voice Command installed on the xda, with the "record" button on the xda mapped to the Voice Command software
So the way it works is as follows.
1. Get into car and place xda in vent mount holder. Attach car charger and PPCTech # 16 adaptor to xda.
2. Turn car radio / stereo on and insert casette sound feeder adaptor (you can use a FM Sound Feeder here instead and tune to the appropriate FM station)
3. Hit the xda "record" button and at the Voice Command prompt say "Play Don Henley" (It's the only CD I have on my SD card right now.. ) The music starts!
4. Then I decide I want to call someone, so, while the music is still playing, I hit the record button again and on the Voice Command prompt say "call Veronica at home". The music stops and the phone dials the number from the contact list.
5. The phone rings and I get her voice mail (she's never at home ) So I hang up and restart the music.
6. Then a call comes in, which interupts the music with the ring tone through the car speakers. I can see who is calling via the xda screen and hit the "call answer" button on the xda to answer the call. My car has volume up and down on the steering wheel, so that its pretty convienent to adjust the volume from there.
7. When the call is done, I hit the "call end" button on the xda and the music starts back up automatically.
It works pretty well. A couple of other things to address your questions.
a. I don't have a speaker built into the xda holder, so sound coming out there is not an issue for me.
b. The 2.5mm headset side does still have the speaker attached, but sound is not a problem as its so low.
c. I too have not found a (cheap) 2.5mm "mic only". I asked the PPC Tech folks if they had or could recommend one. They did not, but their solution was simple and inexpensive...."we find just cutting of the headphone part off the handsfree works well"!!
The other thing I use and love is PocketMax "PhoneAlarm" (www.pocketmax.net) As well as some great alarm functions, this app supports various profiles that control, amongst other things, the input and output sound on the PPC mic and speaker. So I set up the "car" profile with a mic sensitivity and audio output that matches the car stereo best. That way there are no big volume changes when switching from say the car radio to the MP3 music on the XDA (BTW, you can also listen to internet radion on the XDA this way too!)
Well there you go, hope that answers your questions. If not, let me know.
Regards
Chris
Click to expand...
Click to collapse
Thanks for the reply Chris. It's interesting to be able to "look" inside your car and "see" your typical day
Related
HI,
i was just wondering the simplest and cheapest was to hook my xda IIs upto my car stereo, i know there is a similar topic to this but it confussed me a little since im not to fussed about the "car kit"
Here is the easist method.
Get one of these adaptors:
http://www.expansys.com/product.asp?code=PPCPADPT01
And a FM transmitter:
http://www.expansys.com.cy/product.asp?code=120328
This will play your music over an available FM frequency on your car stereo. This generally produces good quality sound with out a lot of fuss.
I’m not vouching for this vendor they showed up first when I goggled for the hardware. You can look around for better prices. I would stick with Belkin brand transmitter its worked in the for me. I’ve heard bad reviews on others, also returned a "Monster" brand transmitter it just sounded horrible.
Good Luck,
N2O2
Heres the hands free and audio solution I put together... pretty similar...
The hands free "kit" I put together is actually an assembly of individual components I selected, rather than an actual kit.
I use a standard non powered, vent mount holder for the XDA 2s and power the device via a standard car charger. The holder does not have any kind of speaker built in. I am currently using the PPCtechs "16" adaptor, with the 3.5mm side plugged into a cassette sound feeder (have also used it with an FM sound feeder as well) and the 2.5 mm side plugged into a standard 2.5mm mono hands free speaker/mic combo. I have the mic part of this attached to the drivers side door pillar. Then, I have MS Voice Command installed on the XDA, with the "record" button on the XDA mapped to the Voice Command software
So the way it works is as follows.
1. Get into car and place XDA in vent mount holder. Attach car charger and PPCTech # 16 adaptor to XDA.
2. Turn car radio / stereo on and insert casette sound feeder adaptor (you can use a FM Sound Feeder here instead and tune to the appropriate FM station)
3. Hit the XDA "record" button and at the Voice Command prompt say "Play Don Henley" (It's the only CD I have on my SD card right now.. ) The music starts!
4. Then I decide I want to call someone, so, while the music is still playing, I hit the record button again and on the Voice Command prompt say "call Veronica at home". The music stops and the phone dials the number from the contact list.
5. The phone rings and I get her voice mail (she's never at home ) So I hang up and restart the music.
6. Then a call comes in, which interupts the music with the ring tone through the car speakers. I can see who is calling via the XDA screen and hit the "call answer" button on the XDA to answer the call. My car has volume up and down on the steering wheel, so that its pretty convienent to adjust the volume from there.
7. When the call is done, I hit the "call end" button on the XDA and the music starts back up automatically.
It works pretty well. A couple of other things to address your questions.
a. I don't have a speaker built into the XDA holder, so sound coming out there is not an issue for me.
b. The 2.5mm headset side does still have the speaker attached, but sound is not a problem as its so low.
c. I too have not found a (cheap) 2.5mm "mic only". I asked the PPC Tech folks if they had or could recommend one. They did not, but their solution was simple and inexpensive...."we find just cutting of the headphone part off the handsfree works well"!!
The other thing I use and love is PocketMax "PhoneAlarm" (www.pocketmax.net) As well as some great alarm functions, this app supports various profiles that control, amongst other things, the input and output sound on the PPC mic and speaker. So I set up the "car" profile with a mic sensitivity and audio output that matches the car stereo best. That way there are no big volume changes when switching from say the car radio to the MP3 music on the XDA (BTW, you can also listen to internet radion on the XDA this way too!)
Well there you go, hope that helps
Regards
Chris
thanks for your help guys.
ill prob just get the adaptor you recommended and then e-bay for the transmitter!
thanks!
Sounds like a plan. BTW, I would agree about the Belkin unit being preferred. I used a ''Sound Feeder" unit, but it did not have an "on' indicator light or external power feed... consequently I kept forgetting to turn it off and needed a new set of batteries every day! I also found that my FM bands in Atlanta were pretty packed, so I could not find a free channel to tune the fm feeder and radio to without some kind of interference... I think the Belkin unit has more frequency options though... Anyhow, thats when I switched to the cassette based feeder, which has worked very well
Good luck!
Chris
Yup forgot about that, cbrow51 is right the audio cassette feeder is the best option if you have a audio cassette player in your car audio system. I went to CDs years ago.
I have an mp3 cd player, I already have one of the tape adaptors, used to use that with a minidisc. so I definitely want a fm transmitter, i think it generally would be handy
anyway noticed there are loads of these going on e-bay, pretty much just paying for postage! http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=58350&item=5787660321&rd=1
Cigarette power cable and power light
I have an mp3 cd player, I already have one of the tape adaptors, used to use that with a minidisc. so I definitely want a fm transmitter, i think it generally would be handy
anyway noticed there are loads of these going on e-bay, pretty much just paying for postage! http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=58350&item=5787660321&rd=1
Cigarette power cable and power light
whether I am "search" disabled or there is no info about audio 2.5 jack pin outs.
will somebody give a link or provide connection diagram for mic, answer/mute button and audio outputs?
my aim is to make my own cable to connect the pda to car stereo to listen mp3s and also place a remote mic and switch somewhere in the car.
its done!
thanks a lot to whom gave me info about this topic. Here is what I have done today;
I bought an after market 2,5mm stereo headphones with mic and switch. it was 5 YTL equvalent around $3,5. I had the chance to try it with my qtek9100, but there was very poor sound level and quality, I didnt even try the mic. Actually I bought it just to get one 2.5mm 4 conductor jack.
I tried to make a drawing how the connections were, marked as "before". It is so wierd wiring that I have no idea which kind of device uses this kind of connection.
After modification, as you will see, instead of soldering the existing ear pieces, I soldered a female 3,5mm jack, so that I can connect whether a stereo headphones to use it as hands free or a casette adapter to use with car stereo and listen to mp3s(which in this case, when I receive or make a call, it will mute the music and give other sides voice to car speakers). Ive tested both possibilities and it works quite fine.
I hope this helps to ones that are willing to make this kind of adapter themselves.
Re: its done!
Thank U for contribution!
canstb said:
Ive tested both possibilities and it works quite fine.
I hope this helps to ones that are willing to make this kind of adapter themselves.
Click to expand...
Click to collapse
I want to give a more precise definition to jack pinouts.
AFAIK pin 4 - left channel, 3 - right. So U have reversed stereo sound or wrong picture female connector.
Does anyone know if the HTC P3350 W100 Wired Remote Control
http://www.expansys.com/htc/p_htc_item.aspx?i=147564[/URL]
will work with the Cingular 8525 (Hermes, TyTN)? This is sold in Europe and can be had in the US from Mobile Planet which seems to be the same as expansys.com.
On the European HTC site there is also a media fix that may apply to this accessory as well as the Y connector.
HTC audio Drivers
Downloading and installing this driver update will provide your HTC mobile device with the latest available optimised software for use with the following accessories:
YC A120 Y-Cable adaptor
The hot music setup for Mogul and 8525
I just purchased the HTC RC W100 Remote from Mobile Planet. It connects to the phone's extUSB and provides a 3.5mm headset jack that carries the mic port out to the connector. It has a 36" cord so there is a lot of cord if you have a long headset cord.
The head has controls for fast forward, pause, +/- volume and you can answer/end calls, mute and put a call on/off hold. This assumes that you have a mic on your headset to talk into.
The http://www.Europe.HTC.Com site says it is for the TyTn II but it seems to work with both the 8525 and the Mogul . . . It is not on the USA site at all.
I use the Sure SE110s stereo headset (individual internal sub-woofer component) and added their MPA-C cable that has a mic in it (Thsi would work for any headset). I have not found any other solutions that wok this well.
The standard headset really has poor quality and is uncomfortable for my ears. Bluetooth is either a mono headset w/ mic or a stereo headset (no mic) and the battery life is unpredictable.
This way I can ride my bike and control my music while the Mogul stays in my camel-back and when a call comes I can actually answer it and then go back to listening.
Very cool setup.
So this doesn't solve the headphone problem? Can't I just buy this and a pair of headphones? I don't need handfree anyway
E: Why a 36'' cord? I totally lost interest
Headphone Problem
N1c0_ds said:
So this doesn't solve the headphone problem? Can't I just buy this and a pair of headphones? I don't need handfree anyway
E: Why a 36'' cord? I totally lost interest
Click to expand...
Click to collapse
N1cO;
I do not know what headset problem you are referring to but this is definitely a solution if you want to listen to music with a good stereo headset. I just happen to like the Shure stuff because they eliminate some road and wind noise while I am riding my bike or skiing. Also the higher end ones actually have miniature tweeters and sub-woofers built in.
All you need is the W100 and any headset with a 3.5mm jack.
As it turns out, I just found out the unit has a built-in mic and that eliminates the need for a more expensive headset that has a mic. There was nothing in the manual that came with it that talked about the mic! So RTFB does not work!
It also comes with a small disc that has the driver in it. I tried to install it on my Mogul but it said that I had the latest driver . . .
As far as the 36" cord, my Shure headset comes in 2 pieces, the earphones are on a short cord so it is not too long. If you had a standard headset, it might get a little long.
The other side of the Shure headset has the connectors that go into the device(s). This way you can have several different connectors for different phones, MP3 players, etc. Blackberry's and Razor's have different jacks and most cell phones like the HTC 8125 (Cingular) use a 2.5 mm jack.
I have the official Samsung cardock, and connected it to my car radio (the cardock has a 3.5mm jack output). Nice, now I can listen to the music on my phone over my carspeakers!
BUT:
Whenever I make or receive a call, the sound of the conversation keeps channeling through the phone's own external speaker. Disabling the phone's external speaker (either during the call or beforehand) does not fix it. It just néver get's through the 3.5mm jack output to my car stereo. Annoying, since my car is pretty loud when speeding.
[Q]How to channel the audio of a voicecall to the jack-output? Does anybody know of a fix for this? I have looked around-and-around-and-around, and have asked this before. Just can't believe I'm the only-one that is bothered by this!
I AM NOT LOOKING FOR BLUETOOTH-CARKIT-SUGGESTIONS, no matter how nice you guys mean it
Anybody any idea?
Nobody no ideas?
I would like to do this too, speeding along the motorway the phone speaker is just too quiet.
rickgillyon said:
I would like to do this too, speeding along the motorway the phone speaker is just too quiet.
Click to expand...
Click to collapse
Ah, at least I'm not the only one... Now let's hope some dev is bothered by the same problem
I guess this is gonna be one of those unanswered questions...
Bump-bumptie-dum
I recon if I bump long enough, someone with the solution should notice this question sooner or later; Although I realize that moment might be somewhere around 2015, with an answer like "Buy a galaxy S9 mate..."
Anyone?
Is the S9 there yet? Or else a solution to my problem?
I have a std aux input into my car stereo. Plugging a stereo 3.5 lead from the phone jack into the stereo aux I can listen to all sounds from the phone over all car speakers including calls... Just like when a headset is connected. Calls go over car speakers and phone mic picks up voice.
It would seem then that its the official samsung dock being treated different to a simple direct lead connection.
My only gripe is during calls the phones mic works but thinks its on a std call and is a bit weak. Wish I could force the mic into speakerphone mode or the levels associated with that mode anyway. Btw... Turning on speakerphone while lead is connected stops the output over the speakers.
I have a trrs mic / stereo splitter adapter and a seperate car 3.5 mic but again the mic levels on the phone in headset mode need boosting.
Sent from my GT-I9100 using Tapatalk
EzDingo said:
I have a std aux input into my car stereo. Plugging a stereo 3.5 lead from the phone jack into the stereo aux I can listen to all sounds from the phone over all car speakers including calls... Just like when a headset is connected. Calls go over car speakers and phone mic picks up voice.
It would seem then that its the official samsung dock being treated different to a simple direct lead connection.
My only gripe is during calls the phones mic works but thinks its on a std call and is a bit weak. Wish I could force the mic into speakerphone mode or the levels associated with that mode anyway. Btw... Turning on speakerphone while lead is connected stops the output over the speakers.
I have a trrs mic / stereo splitter adapter and a seperate car 3.5 mic but again the mic levels on the phone in headset mode need boosting.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Hmm... So maybe if I use a splitter to merge the signal from both the cardock AND the phonejack...
Thnx m8! Not entirely what I was looking for (one more thing to do when plugging in my phone in the car), but it just-might-work!
Will report back
Just note I do not 'need' the splitter to make it work. Without a splitter it works just fine using car speakers and the phones mic (as the aux lead is std audio lead only - not including the third ring position for the mic).
I just got the splitter to use a seperate external mic in the car. The splitter simply has all 3 rings to make phone think its a full headset connected like the set that comes in the box with the phone and splits audio and mic into 2 seperate connections. This way I then take the std aux lead from the audio split to the stereo for listening over the car speakers and use the mic split for plugging in any std 3.5 external mic.
EzDingo said:
Just note I do not 'need' the splitter to make it work. Without a splitter it works just fine using car speakers and the phones mic (as the aux lead is std audio lead only - not including the third ring position for the mic).
I just got the splitter to use a seperate external mic in the car. The splitter simply has all 3 rings to make phone think its a full headset connected like the set that comes in the box with the phone and splits audio and mic into 2 seperate connections. This way I then take the std aux lead from the audio split to the stereo for listening over the car speakers and use the mic split for plugging in any std 3.5 external mic.
Click to expand...
Click to collapse
I understood that, it's just that I would probably need a splitter in my specific situation, since all my music gets played through the cardock by default as soon as I plug in the phone... It's possible to disable this automatic switch of audiorouting when the phone get's plugged in though, but somehow it just doesn't feel right to NOT use the audio-out feature of the cardock
thanks for reading this. I searched but couldn't find anything strongly pertinent.
If listen to media, perhaps a podcast (podcast addict) or music (poweramp), then it comes out of the speaker until I plug in a headset (my old Samsung headphones work OK), and sound switches over. The headset plug has the usual tip + 3 rings.
If I plug in some external speakers, the sound doesn't cut over to the speakers on the headphone socket, so audio continues on the speaker. The speaker plug has tip + 2 rings.
My guess is that the Xperia detects the speakers from a change in impedance, rather than a switch? Or could it be the speakers's connector isn't sensed because it's only a stereo jack not stereo + mic jack?
I can't find any manual override settings in any control panel.
thanks for any ideas.
Paul
Continuing to think about this, I considered there might be an app which allows manually switching between speaker and headphone.
A bit of research and I found SoundAbout, which is far more powerful than I need as it allows you to override audio routing to any output such as bluetooth, hdmi, headphones, dock etc.
https://play.google.com/store/apps/details?id=com.woodslink.android.wiredheadphoneroutingfix
What I specifically like about this is it gives you a simple widget to toggle speaker and headset.
Of course, I'd rather the built-in switching worked, so I am still open to ideas, thanks.
Well I use some normal headphones which are standard mini jack with 2 rings and it transfers fine so I don't think it has to do with the need for 3 rings. What are the speakers out of interest?
Sent from my C6833 using XDA Premium 4 mobile app
I've had the same problem but it's not related to what I plug in, it's just random. Sometime's it's my headphones that came with the Z Ultra and sometimes it's a Monster 1/8 inch cable for plugging into my car's stereo. I think others have posted the same issue with it not detecting something plugged in. Luckily it's pretty rare for me, every month maybe.