Hello.
Where Can I download thos splash screens?
1. BubbleSplash.cab
2. MEDC2k5Splash.cab
3. O2Splash.cab
4. WMSplashArctic.cab
5. WMSplashCoil.cab
6. WMSplashEarth.cab
7. WMSplashFields.cab
8. WMSplashO2.cab
9. WMSplashSolar.cab
Thanks.
stas12 said:
Hello.
Where Can I download thos splash screens?
1. BubbleSplash.cab
2. MEDC2k5Splash.cab
3. O2Splash.cab
4. WMSplashArctic.cab
5. WMSplashCoil.cab
6. WMSplashEarth.cab
7. WMSplashFields.cab
8. WMSplashO2.cab
9. WMSplashSolar.cab
Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=17410&postdays=0&postorder=asc&start=0
this is also running for both wm2k3se and wm5:
http://forum.xda-developers.com/viewtopic.php?p=114774
http://forum.xda-developers.com/viewtopic.php?t=22083
Related
I noticed that some of my applications that worked fine on froyo prior to the OTA update, thay are not using the full screen now and its making some of the buttons and immages unavailable or cut off... Is there a fix for this?
Easy fix
1. Download this:
https://market.android.com/details?id=com.droidgram.spareparts&feature=search_result
2. Open it, and UNCHECK compatibility mode.
3. Reboot your phone
4. Hit my Thanks button
5. Enjoy
-omni
omni_angel7 said:
Easy fix
1. Download this:
https://market.android.com/details?id=com.droidgram.spareparts&feature=search_result
2. Open it, and UNCHECK compatibility mode.
3. Reboot your phone
4. Hit my Thanks button
5. Enjoy
-omni
Click to expand...
Click to collapse
Thanks... ill like this when I get home. You saved me
Sent from my MB860 using XDA App
Hi all, i'm new to this forum.
By the way, i've search this forum for similar thread, but i cant find.
Basically my problem was that during my process of rooting,
i cant have my android boot-up.
The problem is :
[ I can go into the bootloader setup ] then,
[ I can see the HTC logo bootscreen] then,
[ I cant see any display on my screen ] i'm shocked now.
and i follow step by step guide to rooting on sensation(link below)
http://forum.xda-developers.com/showthread.php?t=1192300
STEP 2. To INSTALL Recovery - v5.0.0.8
1. Download recovery v5.0.0.8 for the Sensation HERE: or Multiupload
2. Copy the PG58IMG file into the Root folder of your SD card (The main Folder of your Memory Card)
3. Turn off your phone FUlly and reboot into the Bootloader/HBOOT screen (see post above on how to get to hboot screen)
4. Press Volume up to Accept when it asks" Do you want to start the update"
5. Press Power Off to Reboot back to android after installation is successful (normal screen with homescreen)
6. Delete PG58IMG from your memory card and you can now root using step 3 below or install a custom ROM using CWM (Customs Roms are already rooted)
Click to expand...
Click to collapse
I faced the problem after i've done step 2 part 4.
But on part 5, there stated "(normal screen with homescreen)".
And the most terrible part is that i can't even see the display, it is a black screen display.
I wanted to ask is there anyway that can i help to get back my screen display??
I'm using HTC Sensation XE with Beats Audio.
So I have a US Galaxy Player 5.0 running 4.0.4. I want to go back to stock Android 2.3.5. How do I do this?
aznflawless said:
So I have a US Galaxy Player 5.0 running 4.0.4. I want to go back to stock Android 2.3.5. How do I do this?
Click to expand...
Click to collapse
Find the stock rooted ROM and flash it. Wipe everything.
This one looks good. http://forum.xda-developers.com/showthread.php?t=1737432
Sent from my YP-G70 using xda premium
aznflawless said:
So I have a US Galaxy Player 5.0 running 4.0.4. I want to go back to stock Android 2.3.5. How do I do this?
Click to expand...
Click to collapse
1) Download stock rom found here: http://forum.xda-developers.com/showthread.php?t=1520728 (Use 7 zip or winrar to extract the file)
2) Download and install Kies found here: http://www.samsung.com/us/kies/ (if you haven't, it's for the driver)
3) Download and install Odin just click the link http://www.google.com/url?sa=t&rct=...IxHp1ISlP2fzGKhtw&sig2=ZjUHLCkIbG1_EprOk9enrA
4) Enable USB Debugging from the GP 5.0 (Settings-> Applications-> Development Check box for USB Debugging)
5) Turn off the player regularly then put it into download mode (Hold Volume down and power), Icon that says downloading at the bottom should pop up (looks like this http://techbyte.co.in/wp-content/uploads/2011/09/Android_download.jpg)
6) Open Odin (make sure only Auto Reboot and F. Reset Time are checked or you will brick your device)
7) Plug in Galaxy Player to USB port. Under ID:COM it should say something like 0:[COM4] and is yellow. In the message area it should say "Added!!"
8) Hit PDA and select the .md5 file named "ueki8_min.tar" (only use the .pit file if you want to re partition your player otherwise it is not needed)
9) Hit Start and wait until it finishes. Should take anywhere from 2-4 minutes.
10) Profit
Optional Steps*
If you get bootloops then
11) Turn off player, and put it into recovery (Hold simultaneously power + volume up
looks like this http://h8.abload.de/img/20100829_004w6fq.jpg
12) Do Wipe data/factory reset, and Wipe cache Partition
13) Profit
Let me know if this works for you, and if possible can you give me thanks http://forum.xda-developers.com/images/icons/icon12.gif
obscuresword said:
1) Download stock rom found here: http://forum.xda-developers.com/showthread.php?t=1520728 (Use 7 zip or winrar to extract the file)
2) Download and install Kies found here: http://www.samsung.com/us/kies/ (if you haven't, it's for the driver)
3) Download and install Odin just click the link http://www.google.com/url?sa=t&rct=...IxHp1ISlP2fzGKhtw&sig2=ZjUHLCkIbG1_EprOk9enrA
4) Enable USB Debugging from the GP 5.0 (Settings-> Applications-> Development Check box for USB Debugging)
5) Turn off the player regularly then put it into download mode (Hold Volume down and power), Icon that says downloading at the bottom should pop up (looks like this http://techbyte.co.in/wp-content/uploads/2011/09/Android_download.jpg)
6) Open Odin (make sure only Auto Reboot and F. Reset Time are checked or you will brick your device)
7) Plug in Galaxy Player to USB port. Under ID:COM it should say something like 0:[COM4] and is yellow. In the message area it should say "Added!!"
8) Hit PDA and select the .md5 file named "ueki8_min.tar" (only use the .pit file if you want to re partition your player otherwise it is not needed)
9) Hit Start and wait until it finishes. Should take anywhere from 2-4 minutes.
10) Profit
Optional Steps*
If you get bootloops then
11) Turn off player, and put it into recovery (Hold simultaneously power + volume up + settings button [button left of the home button])
looks like this http://h8.abload.de/img/20100829_004w6fq.jpg
12) Do Wipe data/factory reset, and Wipe cache Partition
13) Profit
Let me know if this works for you, and if possible can you give me thanks http://forum.xda-developers.com/images/icons/icon12.gif
Click to expand...
Click to collapse
worked perfectly, but yea i had to wipe data/cache as it was bootloop before
Saved!!
obscuresword said:
1) Download stock rom found here: http://forum.xda-developers.com/showthread.php?t=1520728
Click to expand...
Click to collapse
Thank you so very much. My device seems to be working very well now. Normally, I am very savvy at learning new things. This time, however, I did not spend enough time playing with my very first Android before I went about bricking it. I bought accidental replacement coverage for my Galaxy 5.0 and did not want to dip it into pea soup to get a new one. I felt it would be dishonest to do such a thing. I registered to this site just to thank you. Great work and best wishes.
The phone must be installed TWRP Recovery. Use at your own risk, I'm not responsible for bricking your device.
Installation Instructions:
1. Enter TWRP Recovery Mode: Turn power off; Press and hold Volume Up key + Power key, when samsung logo appears release power key only, keep pressing volume up until TWRP recovery appears
2. Select Wipe - Format Data - type "yes" and confirm
3. Copy GSI ROM to your phone
4. Install - Install Image - select lineage-17.1-20200413-UNOFFICIAL-treble_arm64_bvN.img - select System Image and Confirm to flash.
5. Select Reboot - System ( boot without magisk )
6. Setup the Phone
7. INSTALL GAPPS: Enter TWRP Recovery Mode
8. Copy GAPPS zip file from PC to Phone
9. Select Wipe - Advanced Wipe - select "System" - Repair or Change File System - Resize File System - Confirm to Resize.
10. Select Install - select open_gapps-arm64-10.0-nano-20200408.zip and Confirm Flash
11. Reboot - System
12. ROOTING: Enter TWRP Recovery Mode
13. Copy magisk manager apk from pc to phone
14. Reboot to Recovery ( boot with magisk )
15. Connect the phone to internet
16. Install magisk manager
Done!
Download:
LineageOS 17.1 ROM
Open Gapps
WATCH VIDEO HOW TO INSTALL IT: https://youtu.be/3l7Hck1aLYY
Is it working on SM-M307FN ??
hm, tested older version, but worked ok
momomago said:
Is it working on SM-M307FN ??
Click to expand...
Click to collapse
hm, few weeks ago i tested an older version (lineage-17.1-20200309-UNOFFICIAL-treble_arm64_bvN), which worked (i mean it booted, can be set), but auto brightness didn't work, dual SIM card support was missing, MTP didn't worked and after that i went to original sammy ROM... if you are willing to try this one, report here please if any of my findings were corrected (dual SIM card support is crucial for me, so if this one correctly recognizes and uses both of them a will give this one a shot again), thanks....
Work with china version sm m3070zcu2asl2 ?
Is anyone able to translate this menu? Or can I change the language? Google translate isn't recognizing the text.
I managed to take a better picture and translate it.
Was curious if I could update the phone through this recovery to the latest Chinese rom: miui_ODIN_21.11.25_81b7b79cb8_12.0
ferid said:
I managed to take a better picture and translate it.
Was curious if I could update the phone through this recovery to the latest Chinese rom: miui_ODIN_21.11.25_81b7b79cb8_12.0
Click to expand...
Click to collapse
Can you share it?
Here you go.
I just pressed power twice. The top option is Reboot
ferid said:
Is anyone able to translate this menu? Or can I change the language? Google translate isn't recognizing the text.
Click to expand...
Click to collapse
1. restart device
2. clear data
3. Connect to Mi assistant
4. safemode
5. Maintenance mode.
ToneLa said:
I just pressed power twice. The top option is Reboot
Click to expand...
Click to collapse
1. restart device
2. clear data
3. Connect to Mi assistant
4. safemode
5. Maintenance mode.