Problem when Upgrade WM03se to w2k5 - MDA II, XDA II, 2060 ROM Development

When i upgrade my O2XDA2 from Wm03se and radio v: 1.14 to W2k5 but happen a problem it can't erase old image. I must reinstall wm03se after wm03se erase image i break connection from XDA2 step reinstall W2k it Ok but w2k operate very bed
I Down W2k from Himalaya
I need up date W2k with radio version 1.18 or higher
please help me
Thanks

Related

HELP HELP - Imate died in upgrade, now got only "USB v1

Hello
Can someone help me save my Imate ?
I got the official upgrade to 1.52.00 Ext 1.52.83 radio 1.06.01 from my existing CE image 1.03.00 Ext 1.03.20 and Radio 1.05.12
I ran this upgrade on a windows 98 with nothing else and the Imate connected over the USB cradle with power.
Then I got ERROR 101 - rerun the upgrade.
NOW, my Imate is dead and when I try the upgrade program I always get "ERROR 101".
What can I do to save it ?
Thanks, Dave

ERROR 114 WHILE UPGRADING 02 XDAII

HI
I AM IN NOW BIG TROUBLE
I HAVE O2 WITH SPLASH ON SCREEN AND HANGS THERE
all i done is upgarde downgrade from version 1.600 /1.66/1.72
all giving same errors
error 114 while erasing radio rom
this is RUUL LOG
9:54:14 Write block133
09:54:19 Update Stage 3 complete
09:54:34 Begin Stage 4
09:55:04 Radio Erase retry 1
09:55:34 Radio Erase retry 2
09:56:04 Radio Erase retry 3
`
THEN ERROR
NEED GUIDANCE
its a nogsm on screen
No GSM
1.72 wwe
thanks
no one has problem before ?
how to do with mmc card
why lauch vwrsion does not communicate with xdaII
i got Xda_II_LaunchROM_v10311
alos Xda_II_Upgrade_v16050
but this two cant communicate
also i put himupgradeUT in same folder but it gives error bed chacksum
i am becoming crazy now
OK.. can u tell me what version you have now? and what version are you trying to upgrade.. lets make this step by step.. i will try my best..
srtange
i had put my phone on charger after two hours
windows start up scrren appeared
also if i allow to reset phone hangs on O2 screen
its work ok now but without gsm
this is information
i got O2 XDAII
ROM VERSION 1.72.00WWE
ROM DATE 03/15/04
RADIO VERSION NOT AVIALABLE
PROTOCOL VERSION NOT AVIABLE
ExTROM VERSION 1.72.181
IDENTITY
Model No. PH10B
Platform: pocket pc
imei: not aviable
i cant flash radio part
my boot loader is 1.03
thanks and regards
Oh My God i dont know how to upgrade the bootloader... i think the problem is your bootloader cuz its not updated.. it sgould be 1.06 and all of that will work fine.. i dont know how to upgrade the bootloeader...

HELP - trashed my xdaII installing wm2k3SE downgrade

Installed a WM2k3SE downgrade from wm2k5 - now I cant activesync to my device (or install any different ROMS), activesync says it is connected, but you cannot open the program up! If you try to upgrade to a different ROM (I have one that I know works), the update program just crashes out! Please help.
I have ROM v 2.02.t1WWE
Radio 1.18.0
Protocol 1337.38
EXTROM 1.12.924 WWE
May have got a bit excited there - installed activesync 4 and it seems OK!

DOWNGRADE from WM6 to WM5 on 8525 att

Ho do u downgrade from WM6 back to WM5 on Cingular 8525? Made a backup with SPB backup under WM5 and need to recover some files.
Every time I connect my ATT/Cingular 8525 and run the rom (The phone starts off connected with activesync) then it disconnects and I get the error message:
"error(260): connection The update utility cannot connect to your PDA phone. Please check that your USB cradle is connected properly between the PC and your PDA phone
rom 2.15.502.3
rom date 04/09/07
radio version 1.40.30.00
Protocol version 32.73.7020.16H
Trying to downgrade to wm5 Cingular ROM
Simply get your WM5 version in the WIKI section and run it. That is all you have to do!
I asume you had CINGULAR WM5 and upgraded to AT&T WM6? Here you can find all shipped versions WM5: http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades and here all WM6: http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
Just pick yours!
enahsak said:
Ho do u downgrade from WM6 back to WM5 on Cingular 8525? Made a backup with SPB backup under WM5 and need to recover some files.
Click to expand...
Click to collapse
Also, http://mrvanx.org has downgrade guides. Great one.
Its been awhile since I've used spb backup, but I thought that there as an option to selectively restore files. Have you tried this?
Latest AT&T WM5 rom is avilable direct from HTC... just download it and flash away... Puts you right back to latest shipped settings.
http://www.america.htc.com/support/8525/software-downloads.html
What are you trying to recover though?
HELP still on HOW TO DOWNGRADE
Every time I connect my ATT/Cingular 8525 and run the rom (The phone starts off connected with activesync) then it disconnects and I get the error message:
"error(260): connection The update utility cannot connect to your PDA phone. Please check that your USB cradle is connected proper;y between the PC and your PDA phone
rom 2.15.502.3
rom date 04/09/07
radio version 1.40.30.00
Protocol version 32.73.7020.16H
Trying to downgrade to wm5 Cingular ROM
What operating system are you using?
enahsak said:
Every time I connect my ATT/Cingular 8525 and run the rom (The phone starts off connected with activesync) then it disconnects and I get the error message:
"error(260): connection The update utility cannot connect to your PDA phone. Please check that your USB cradle is connected proper;y between the PC and your PDA phone
rom 2.15.502.3
rom date 04/09/07
radio version 1.40.30.00
Protocol version 32.73.7020.16H
Trying to downgrade to wm5 Cingular ROM
Click to expand...
Click to collapse
I had this once too!
If you grab the official AT&T WM5 ROM from the WIKI this error will not appear!
Another workaround: extract the nbh file from your downloaded WM5 and flash it with CUSTOMRUU

[28.07.08] Nike and Neon Radios

As far as camera issues, try changing your radio. I haven't personally had any problems with my camera not working but people in various threads have reported camera problems going away after changing the radio.
Your Device must CID unlocked! You need minimum USPL and HardSPL started! If not ... Flashing stops on 99%!
If you use the wrong Radio with your Rom:
Device can get hot!
Power drain is very high!
Radio stuck, doesnt ring, no Audio, Hardware Problems, ...
Radios they work on HTC Niki
RUU Nike Radio 1.58.11.07
RUU Nike Radio 1.58.13.28S
RUU Nike Radio 1.58.16.27
RUU Nike Radio 1.58.21.23
RUU Nike Radio 1.58.21.23P
RUU Nike Radio 1.58.21.23S Modded (Save Power and have better Network Connection!) "Highly Recommended"
RUU Nike Radio 1.58.25.14P
RUU Nike Radio 1.58.26.20K
RUU Nike Radio 1.64.06.04K
RUU Nike Radio 1.64.08.21K
Radios they work with new Drivers on HTC Niki:
Use Kaiser/Niki eMonster Drivers or from HTC Neon!
Some user Reports problem with her "eMobile S12HT" - NIKI500 - i havent enough infos in the moment! Dont overwrite your Original OS and Radio.
RUU Nike Radio 1.65.14.06K
RUU Nike Radio 1.65.24.36
RUU Nike Radio 1.71.09.01K "Highly Recommended"
Radios they work on HTC Neon:
RUU Neon Radio 1.58.25.17N "Highly Recommended"
RUU Neon Radio 1.65.14.16K
RUU Neon Radio 1.65.16.25K
RUU Neon Radio 1.65.17.56K
RUU Neon Radio 1.65.20.29K
RUU Neon Radio 1.65.24.36
RUU Neon Radio 1.71.09.01K
This are all Radios from different Devices. The QUALCOMM Plattform is very compatible!
Letter Code:
K = comes from Kaiser
S = comes from Sedan
P = comes form Polaris
N = original from Neon
no letter = original from Niki
What does a Radio:
The Radio OS is Linux and run in a signed or crypted EFS. Its the main device driver are only stored and config in it! All functions about Wifi, GPS, 3D Acceleration, Blue Tooth, OS Key Mapping, USB, and Audio are handle in the Radio and NOT in the OS!!! The OS have only bridge Drivers to connect to the Radio. What config is in use, are handle via device PID in the NAND.
This is the reason, why some Radios save Power and other have better signal strange! Signal strange is more Country ID related and power saving more related to Protokoll Version.
If you are stuck in the bootloader, download MTTY, connect via USB (Activ Sync must disabled via USB!!!) and type the Command "boot"
Please tell me ... are HardSPL or USPL installed or do you use SSPL ak JumpSPL? how is the radio rom version, you have try? winxp or vista?
so which is the latest and what are the differences ??
Highest Version are the newest ... whats differents ... HTC knows :-> 1.58.21.23 was in the lastest Radio Rom from HTC.
OIC, I updated the Radio rom.... but.. something freaky had happen....
My touch Flo menu which shows 6 box , email, sms/mms, internet, task, comm manager, calender.. is missing the internet button. only 5 show.. and the internet button is blank(black).
Did you guys get this problem?? and how to repair it??
--------------------------------------------------------------
Forget my question... after a hard reset.. it came back out................
make a hard reset
radio
Hi, can you explain to me how to flash radio rom ?
What I need ?
Thank you
Your Device must CID Unlocked. You can do this with HardSPL, USPL or SSPL. After that you are can flash a Radio Rom, but you doesnt need it in the moment! Possible after i Release a higher Version!
NetrunnerAT said:
Your Device must CID Unlocked. You can do this with HardSPL, USPL or SSPL. After that you are can flash a Radio Rom, but you doesnt need it in the moment! Possible after i Release a higher Version!
Click to expand...
Click to collapse
But I have the niki with Radio 1.58.16.27, so if I flash the Radio 1.58.21.23 this is a higher version for me ... or not ???
Yes it is ... my english isnt realy good enough to explane all details about radio rom revision!
some roms are faster ... some have higher batterie drain ... some have special functions for special phone networks!
Can I use the Radio 1.58.21.23 on my niki or there are problems ???
Yes ... you can use without Problems!
Ok, thank you.
I wiil try !!!
I've already upgraded to Radio 1.58.21.23 from 1.58.16.27 haven't notice anything significant other then my bluetooth activesync seems to be more consistent, I guess it's early days yet to conclude anything about this Radio, I'll see how I get on with it in the next couple of days!!
NetrunnerAT said:
As far as camera issues, try changing your radio. I haven't personally had any problems with my camera not working but people in various threads have reported camera problems going away after changing the radio.
This are Niki Based Unmodded Radios from Original HTC Roms!
RUU Nike Radio 1.58.11.07
RUU Nike Radio 1.58.16.27
RUU Nike Radio 1.58.21.23
I will Publish modded Radio Roms!
@ Mods ... please make it Sticky!
Click to expand...
Click to collapse
please correct second link - h from http is missing.
thanks
and please keep the good work up !
have a great sunday ;-)
uhm ... thx ^_^
well...
that didnt work :|
running vista ultimate sp1, following all the guides, trying to update to RUU Nike Radio 1.58.21.23,
had the RUU Nike Radio 1.58.16.27 installed...
everything went fine untill it came to 99%... it stalled and the install program told me to follow some
recovery steps, i did, but vista cant recognize the usb device... henche, i cant connect to the phone...
is there a place for drivers or so...??
please help out a noob...
If you stuck on 99% -> via MTTY command "boot"
tell me what you see in your bootloader!
new rom
Will the new ROM improve my signal strength?
Possibel ... i use in the moment a modded rom ... the datarate is higher. if i get a modded spl, i will analyse the radio roms and make a list of the functions. read the kaiser thread about radios!!
NetrunnerAT said:
If you stuck on 99% -> via MTTY command "boot"
tell me what you see in your bootloader!
Click to expand...
Click to collapse
Hi
I stuck on 99% (with Radio_1.58.21.23), but now I can't update and my niki is always in boot-mode (red/green/blue)
I have tried MTTY boot, and I have same problem
MTTY Output:
boot
Fill RSVD information for block 288 to 309
Storage start sector=0x9E00, total sector=0x114C0
Storage start block=653, total block=1107
Total Bad Block in CE: 0
Erase physical block from 943 to 2032
si backup: Erase physical block from 2032 to 2048
No card inserted
OEMGetUpdateMode
OEMTranslateBaseAddress 23 80000000 80000000
IPLMSG:0x8:INFO: Loading image ...
IPLMSG:0x9:INFO: Jumping to image...
OEMLaunchImage 80000000
Jump to Physical Address 10300000
-------------
:'(

Categories

Resources