Related
Hi,
yes - I've read ALL the dead tytn posts and followed all Wiki options but not describe my situation.
I was having a perfectly stable Tytn for the past few weeks, didn't install anything, used it daily with no issues.
Yesterday I decided to reboot to clean the mem a bit (God knows why) and after the restart it simply came on with a blank screen.
The screen shows nothing and the backlight turns on but nothing.
I tried to put it in flash mode and yet the screen remains blank - nothing.
Took the battery out for an hour back in - dead screen.
Did a hard reset - still dead screen.
Tried a sd flash method - still nothing showed.
I even took it apart to check the cables - all in place nothing shows damage or issues or even dirt.
It doesn't show a thing no matter what I try,
ActiveSync is not connecting and all rom flashers fail to connect (error 260).
Tried mtty but didn't get the usb> prompt (just cmd>)
The wierd part is that it still recieves calls from time to time.
Did anyone face this or know of any solutions?
PLEASE HELP! This is so sad...
giliav said:
Hi,
yes - I've read ALL the dead tytn posts and followed all Wiki options but not describe my situation.
I was having a perfectly stable Tytn for the past few weeks, didn't install anything, used it daily with no issues.
Yesterday I decided to reboot to clean the mem a bit (God knows why) and after the restart it simply came on with a blank screen.
The screen shows nothing and the backlight turns on but nothing.
I tried to put it in flash mode and yet the screen remains blank - nothing.
Took the battery out for an hour back in - dead screen.
Did a hard reset - still dead screen.
Tried a sd flash method - still nothing showed.
I even took it apart to check the cables - all in place nothing shows damage or issues or even dirt.
It doesn't show a thing no matter what I try,
ActiveSync is not connecting and all rom flashers fail to connect (error 260).
Tried mtty but didn't get the usb> prompt (just cmd>)
The wierd part is that it still recieves calls from time to time.
Did anyone face this or know of any solutions?
PLEASE HELP! This is so sad...
Click to expand...
Click to collapse
the cmd> prompt means its in bootloader.
question is... have you put Hard-SPL on this device.
Hi,
Thanks for replying.
Yes I did - I've put your outstanding hard-spl 2.10 (http://forum.xda-developers.com/showthread.php?t=296722) on it and it worked great.
Can I use the CMD to somehow re-flash or do something else?
You think it's software related?
well i did the silly thing and did a flash upgrade on my atom exec to WM6 v7
it went 100% restarted fine
but now!!!!! im stuck on the align screen it doesnt listen to my taps, if i move my fingers all over the screen it eventually pick it up but it isnt accurate enough so keeps restarting the test align session... HELP PLEASE i have meetings comming up and need this phone
i can get into boot loader mode but when i connect phone to laptop it doesnt connect active sync while in bootloader mode...
can i skip this screen align somehow
You are not suppose to upgrade the EXEC with the ROM .
Check out the WIKIPEDIA ATOM solutions page for assistance.
I think therz a way to get back to the ORIGINAL ROM , ask a SENIOR for help also search the forums for older posts , i remember someone with ths same problem as yours
really? i just ran the utility here:
http://forum.xda-developers.com/showthread.php?t=333165
without making any changes to it
how do i go back to original pleaseeee help someone... if i got in boot loader mode and run the same upgrade utility (as linked above) it lets me click upgrade but then quickly says connection failed and then my bootroom reads:
"please use DSUU in OS mode and sync with PC first!!!
where do i get original and how do i do it please... maybe there should be a sticky for stuff ups like this
wow no one is kind enough to help... ive tried this:
http://forum.xda-developers.com/showthread.php?t=331818&page=1
but it freezes on 6% and i took the advise read in the wiki to hard reboot then run DSUU , and it does the same thing (stuck at 6%)
well now i have the wm5 starting but its stuck again on the tap the screen? ignoring my taps...
could it be my screen is stuffed? although it worked before the flash
okay !!! progress!!!! ....'
ive finally called o2 and put their rom and it works to a certain point, the align screen detects my taps but it just keeps repeating over n over n over asking me to keep taping around the screen???
Hard Reset
I think hard reseting it once should solve the issue...........if it doesn't try reflashing it once again.....worked for me............brute force is needed sometime
no i figured its screwed my digitzer somehow so im asking for calibration data in other post
Obviously I'm a n00b I just got my 8525 yesterday, right away I upgraded to WM6 went all day today with it working fine, I installed a PockMSN and Windows Live anyways to keep it short I FIGURED I WOULD just RE-INSTALL Windows Mobile 6 to get a fresh phone (didnt know hard reset did the same) Actually it was the 3rd time I flashed the OS and RE-UPGRADED to WM6 to get a fresh phone!!!!
~heres the trouble~
In the middle of the reinstalling WM6 I accidentally reset my computer, didnt realize it right away and, got ERROR 260 I believe, anyways I followed the directions, took out the battery and reset, plugged the USB back and RAN the Offical WM6 Rom of HTC site again and it keeps getting stuck EVERYTIME at 11%, I have tried it like 10 times and it gets stuck at 11%, and I get the same ERROR. Says Communication error 260. I have tried everything I know reset the computer, changed USB cords, and Nothing, everytime it gets stuck at 11%!!!!!!
Any Ideas about how to get my 2 day old Hermes back??
(I know i did a n00bish thing and I am sorry)
same place everytime!!
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
nicknowsky said:
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
Click to expand...
Click to collapse
Perhaps you could try to flash using the sdcard method. So you would not be connected to a pc anymore. Who knows, it could solve your problem. I know one case where installing an official rom cured also a similar problem.
Quick summary of the sdcard method:
Use an empty sdcard formatted in FAT32
Copy the RUU_Signed.nbh file containing the OS to the card and rename it: hermimg.nbh
Enter bootloader mode (OK + POWER + Softreset). Normally, after the 3colors screen, you will get "Loading" followed by a description of what is on the card.
When ready, press power and... wait...
Good luck (The phone is NOT connected to the pc)
sounds good but I dont have a MicroSD card reader to do that. And I am using an Offical HTC WM6 ROM, thats all I ever used was the offical WM6 Rom from the AT&T site. Like I said, I was able to install WM6 already, but me being a complete idiot was Flashing the upgrade ROM to get the Hermes back to fresh phone factory settings. But I accidentally reset the computer in the middle of Flshing and since then I have never been able to get it to install again, everytime I turn on the phone I am stuck at the Tri-Color Screen, I am able to restart the upgrade process, but it stops at 11% says ERROR 262 and no connectivity!!
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
nicknowsky said:
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
Click to expand...
Click to collapse
Ok. I am a bit annoyed if you cannot try the sdflash method (BTW you can ask somebody having a PC to prepare the card for you.)
There are different things you can flash on your hermes. Radio, OS, Splash screens, Extended Rom,.... The most tricky thing is the radio rom as a failure there has a higher probability to brick your pda.
This is why i believe it is very dangerous to flash right away without some readings and understanding about what you do. i hope you had some experience here.
Did you first install hardspl (olipro 2.10 )? This is not mandatory but is a very good protection against bricking. (here the excellent guide of mrvanx: http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27 )
Did you flash also a radio rom? (Was it included in the "package" you wanted to flash?) If yes, i am a bit anxious that a stop at 11% is a problem... BUT, if you flashed a radio rom, it goes very, very, very... slowly. And gives the feeling that it freezes. For the "radio" part it is normal . I hope you did not stop the process too soon.
Once again, try the sdcard method. Or try to flash an official rom (most of the time containing a radio part...) and be patient. Can take till 25 minutes.
If this does not work, do not panic yet. Others had also problems before you: go there and start reading : http://forum.xda-developers.com/showthread.php?t=286755 and here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
There is a hope to solve your problem. Good luck
Try to flash a radio ROM, turn the device on and if it stays at the bootloader screen (the tri colour screen) make a note of the version displayed. Hook up the device with USB cable, dont worry about activesync.
Download and unzip a radio ROM upgrade (try this one), run the exe, select your bootloader version on the screen....follow the screens through and see if it works.....radio roms take ages to flash so DO NOT disconnect your device.....if it doesnt work you most likely have a corrupted radio bootloader.............which is likely since the radio flash takes the longest ammount of time the reset probably occurred halfway through this.................unlucky
Give it a try though.
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
mrvanx said:
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
Click to expand...
Click to collapse
I could not say better
I know, the MicroSD method is nice, but when I got the phone the guy gave me a MicroSD card, but not the regular SD card to read it on computers ( i do have a card reader) Guys a super appreciate the replies> I am gonna try everything rite now, but real quick is my Hermes FUCT??? or is this error fixable??? It is just losing communication everytime at the exact same place, it just seems like something is fixable, but my sorry luck i cant get over the hump!! I will let ya'll know ASAP
okay, here is the thing, Every Hermes ROM update utility I have downloaded wont work, i start it and the VERIFY INFO ON HERMS windows appears about 2 minutes late I get ERROR 260 and it exits! Now when I use the OFFICAL WM6 upgrade ROM from the ATT/HTC site it seems to read the HERMES and wanna start the upgrade process, but thats where it ends at 11% No other RUU I have used or tried has even gotten that far, I just get ERROR 260 before it starts and I have to exit.
What it looks like is I cant communicate with my HERMES at ALL!! Active Sync wont see, only when I reset my computer and reset the HERMES and I plug it in a different USB port, it says Installing New Hardware and HTC USB something and then Hardware has installed and is now ready to use. But Active Sync wont recogniZe it
I'm sorry to tell you that but i think you ****ed up your phone and it is as useless as my ****ing jasjam.
please give us some detailed info s about your hermes like IPL SPL GSM STATUS....
When I am in Tri Color Mode I see.......
HERM100
IPL-1.04
HERM100
SPL-2.03
and SERIAL at bottom, then USB when I plug it in to my computer
I had upgraded to WM6 before on it, but me being a impulsive FOOL, i flashed it again to get me back to Factory Setting (didnt know HARD RESET did the same) and I accidentally RESET my computer in the middle of ROM Upgrading and ever since I cant get past 11% when I try to do it again (using the OFFICAL WM6 ROM from HTC)
and I cant get any communication with mtty although I dont know much about that app, I get a CANT load screen appear
is your phone KITL enabled.
hold the COMM manager button + POWER button + OK button (the one on the left side under the jog wheel) and reset with stylus.
if you see KITL dialogue then it is KITL enabled (MY bricked jasjam is KITL disabled)
if it is KITL enabled then read : http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES and your phone will be just fine.
if it is not then your phone is ****ed up just like mine
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Hey dude!
Would you kindly provide me the sulotion.
I would appreciate it.
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Mmm... do i understand correctly your post? Are you hesitating to help others because your method is risky, or because you express some exasperation about people on this site? In this case, do not forget that all people here are exchanging ideas, questions etc on a totally free base without any obligation. In the limits of there knowledge. Encountering a problem after flashing a device is the only responsability of the user. We just try to help. But i prefer to believe that you found a method, still risky, that you need still to test
That said, it seems that there are an increasing number of hermes encountering a problem with the radio part. It seems that stopping a flash at 11% is a symptom of that. See some consolidation of those problems here: http://forum.xda-developers.com/showthread.php?t=349461
I hope you will find a solution for your problem and moreover i hope that none of you bought a hermes second hand with an already radio part problem. If so try always to get your money back...
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
nicknowsky said:
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
Click to expand...
Click to collapse
Why don't you answer my PMs????
Please tell me your sulotion and let me try that if you have any
hey there been a member for sometime and have tried to search for a solution to my problem and am abit confused.
and sorry if its such a newb question (dont burn me for it)
i have an o2 atom exec (using RC3 rom with touchflo) and yesterday i /soft reseted/ the phone because it was acting funny, after the reset it would be stuck at the startup screen and would not load past that the whole day, so i waited and re-tried in the evening.. the same thing occured... i was at the time able to load into bootloader (MN2) but then could do nothing else.. so i searched throughout the forums and found a post by 'chartreux' http://forum.xda-developers.com/showthread.php?p=1684559&highlight=EBOOT.NB0 but had not read the entire post and proceeded to load (mn1) onto my phone via mini sd card and it worked, my phone was working again, it performed a hard reset and restored it to factory settings (ie: calendar, msgs, contacts, software all gone) and phone is working normally again... since it has done this i wanted to update to 'wm6.1 atom exec rom' just to be up-to-date and have synced it via activesync and have run "DSUU" but my phone just restarts and loads the current rom i have installed! and just repeats everytime i have tried (have tried atleast 50 times)
so my main question.. is my bootloader dead? i know my phones not bricked since its still working perfectly im just not able to upgrade my ROM but can still do everything else (such as browse through files, run programs, make calls)
and last of all.. can anybody please help?! as i am at the point running the phone over with my car!
and once again am sorry for the stupid question.. =/ and thanks for hearing me out!
cheers!
stylistik said:
hey there been a member for sometime and have tried to search for a solution to my problem and am abit confused.
and sorry if its such a newb question (dont burn me for it)
i have an o2 atom exec (using RC3 rom with touchflo) and yesterday i /soft reseted/ the phone because it was acting funny, after the reset it would be stuck at the startup screen and would not load past that the whole day, so i waited and re-tried in the evening.. the same thing occured... i was at the time able to load into bootloader (MN2) but then could do nothing else.. so i searched throughout the forums and found a post by 'chartreux' http://forum.xda-developers.com/showthread.php?p=1684559&highlight=EBOOT.NB0 but had not read the entire post and proceeded to load (mn1) onto my phone via mini sd card and it worked, my phone was working again, it performed a hard reset and restored it to factory settings (ie: calendar, msgs, contacts, software all gone) and phone is working normally again... since it has done this i wanted to update to 'wm6.1 atom exec rom' just to be up-to-date and have synced it via activesync and have run "DSUU" but my phone just restarts and loads the current rom i have installed! and just repeats everytime i have tried (have tried atleast 50 times)
so my main question.. is my bootloader dead? i know my phones not bricked since its still working perfectly im just not able to upgrade my ROM but can still do everything else (such as browse through files, run programs, make calls)
and last of all.. can anybody please help?! as i am at the point running the phone over with my car!
and once again am sorry for the stupid question.. =/ and thanks for hearing me out!
cheers!
Click to expand...
Click to collapse
what version of your bootloader now? MN2 or MN1? if still MN1 please read again the thread to update your bootloader to MN2 (since your device is ATOM EXEC).
and after done, please check when you run DSUU, see on the left bottom whether have a drop down box or not? if yes then choose "ALL"
hope this can help to solve your problem.
hey! thanks for the reply mate!
but im not sure i cant check the version of my bootloader...
wont let me get into it by pressing camera+SR or camera+off button..
just boots straight into the operating system.
and, as for the DSUU it just restarts the phone after i choose all, and goes through to the today screen on the phone, and as for the DSUU update its stays at the screen which shows "The current software is now being updated from your device."
followed by an error appearing after a few minutes showing " No download target was found!!" even though my atomexec is synced
which is then followed by the "connection error" screen.
please help.. this is seriously pissing me off...
stylistik said:
hey! thanks for the reply mate!
but im not sure i cant check the version of my bootloader...
wont let me get into it by pressing camera+SR or camera+off button..
just boots straight into the operating system.
and, as for the DSUU it just restarts the phone after i choose all, and goes through to the today screen on the phone, and as for the DSUU update its stays at the screen which shows "The current software is now being updated from your device."
followed by an error appearing after a few minutes showing " No download target was found!!" even though my atomexec is synced
which is then followed by the "connection error" screen.
please help.. this is seriously pissing me off...
Click to expand...
Click to collapse
try to downgrade again your bootloader to MN1 (please do it step by step). as long you can secure your bootloader, hopefully you can resolved your problem.
remember to upgrade again to MN2 once you able to downgrade to MN1 before try flashing to wm6.1.
good luck.
still cant access bootloader.. even when trying DSUU it just boots straight into the operating system, when trying to update and also i tried the MN1 bootloader again and tried to get into it... still nothing.. it just resets, i tried it with my 4GB mini sd, 2gb msd, and a 64mb mini sd.. could not get into it... sigh...
Ok try a deep breath and read all the posts on dead boatloaders and other upgrading problem posts through and through. Then try to change ur USB cable and what system are u using i.e XP or Vista????
thankyou kindly, for the suggestions i have been reading through alot of posts and tried alot but.. nothing so far.. i guess its not too bad since its stuck on windows mobile 6 with abusalzas rom..
im just annoyed i cannot upgrade to the latest 'rom' and since my phone 'had' to perform a hard reset why not update so yeh.. and i am using windows xp for my computers os.
Did u change the USB cable mate, once I had to do it and the interesting thing is that the same USB cable was working perfectly for other things but causing problems when connecting to my Atom Exec.
yeh tried it with my old v3 cable didnt work has the same outcomes.. sigh.. i might try that dead bootloader hardware and software recovery from this post by Alex_Beda & 1stMASTER
http://forum.xda-developers.com/showthread.php?t=336278
what you think?
although my phone doesn't resemble there symptoms list.. as it still works and everything just cant get into the damn bootloader.. :/ when done manually and when trying to upgrade..
Did u read this mate ?????
http://forum.xda-developers.com/showthread.php?t=358442
You just try the DSUU with upgrade "OS" only and not "ALL".
alright cheers buddy! ill try it out and i hope it works!!
bahh.. didnt work =( just restarted my phone and gave me a connection error screen on my computer....
Actually i have the same problem, i tried to get into the bootloader by press and hold camera + reset button it just restart and load the WM
Dead atom exec
My atom exec having problem ( dead ), so after press camera reset sw my atom can booting normaly but touch screen function only for entering password and then touch screen not response anymore. I check the system information by touch the button (manualy) but IMEI not ready and Radio not ready.
Pls someone can help us.
o2 atom bootloader
hello
my o2 atom bootloader screen mn1 dignostic manger screen remains after rom flashing .i tried flashig orginl rom and pedvit rom but bootloader screen comes again .not starting my mobile please help
Hi! its my 1st post on this forum, please avoid if its in wrong section.
Well, I have Jasjam & I have tried to Burn WM.6.5 ROM & at 96% I got error.
& after that when I Turn on my Phone, I see the start logo Screen & the phone stuck there, after reading few post here at XDA I have Accessed the boot loader tri-colour screen but don't know what to do with it.. I can see
Herm100
IPL-1.01
Herm100
SPL-1.06
I have read out a lot of posts saying Upgrate SPL , downgrade SPL etc etc
its the 3rd day I am continuously reading posts & every new post is making me messed up with new terms etc..
is there anyone who has the right solution for my Jasjam?
Hi there,
I'm stuck with the same problem as well. What I'd recommend is to wait for at least 30 minutes so that the HTC screen goes away and boots into windows. My TyTN got stuck at 81% in flashing a Schaps rom and the solution I found was to plug it in the charger, start up the phone and wait for a good 30 - 40 minutes. Once it booted into the home screen I reflashed it.
If that doesn't work, try the Mtty.exe tool from HTC. There are quite a bit of posts on how to use it. If it doesn't work then since your already in the tri-colour bootscreen, try reflashing the rom by running setup again. Hardspl if you have to but do not run active sync as it will not recognise the device. Hope this helps!.
PS: Incase your lost in which rom to use, try using a schaps rom. Search the forums for it. Pm me for further instructions since I've recovered my phone through these methods. Try to keep the forums clean!