After failed update Ive decided to go back to 1.66 imate rom ( my device is imate) but whenever I try to do it it gives me error ERROR 100 - deivce ID error. imate stuck in bootlader.
TIA
C'mon people, help me out here. I've tried all roms 1.52 original, tmobile, o2 - they all give me this error! Is there a way to avoid device ID checking?
Becare full you guys!! This ROM is FULL of ****!! Upgrade is OKEY!! But DOWNGRADE or STUCK in the MIDDLE while you UpGrade it, YOU WILL GET MODEL ID ERROR!! THAT"S FREAK!! Now my XDAII is DEAD!! itsme already try to help me with program language, but i donno using what and from where? And with what kind of tools? Any body wanna HELP me out here?
Hello !
I was trying to upgrade my XDA2 from the english language to german,
but my PC hung up
Now when i try to run "xda_16052ger_o2.exe" it says "ERROR 100: MODEL ID ERROR".
"The ROM image that you are trying to use is not designed to work ,,, "
With different ROM´s it says "ERROR 120: COUNTRY ID ERROR 1-1-8-8-8".
I have also tried this files "http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIRom.htm".
Then i have read lots of your postings like "http://forum.xda-developers.com/viewtopic.php?t=8606", but this is not working
Right now my XDA2 shows "Serial v1.06" and nothing is working
Is there any trick ? What can i do ?
Thank for any help !
Regards George
install t-mobile beta version 1.72 (it´s in english).... after that you can install almost all ROM´s or even all
I tried to downgrade from ROM T-Mobile to 1.60 WWE asia rom, but received the message 100 Device ID Error, what should i do? I have changed my model id to PH10B and still does not work, and i can't even up rom to T-Mobile, because the same error, anyone have an ideas?
I got this "ERROR 100: MODEL ID ERROR",... pl help
I try to upgrade XDA2 rom from "ruu172104wwe_t-mobile-uk" to "XDAII_172181_Final" and I got this error "ERROR 100: MODEL ID ERROR"
How can I slove this problem?
First I have O2 rom and I upgraded to "ruu172104wwe_t-mobile-uk", when I try to upgrade to "XDAII_172181_Final" everything look fine till the error occur I can open my O2 anymore on the screen show just message "serial v1.03"
Please help,.. Thank
I get after 1% of the progress bar after all the rest of the questions an error 244 on the athena. Can anyone help. This apparently is a "INVALID MODEL ID " and I can't see why this would be. I have tried the 12 AP 3an and 4 as well as the michy rom. All do the same
And yes I have seen "How to FIX INVALID MODEL ID after bad flashing " post but when I follow the thread through the forun I get to the fixing wifi using mtty, is this really all that needs doing. Does the mac address and wifi sort also fix the vendor ID?
btbill said:
I get after 1% of the progress bar after all the rest of the questions an error 244 on the athena. Can anyone help. This apparently is a "INVALID MODEL ID " and I can't see why this would be. I have tried the 12 AP 3an and 4 as well as the michy rom. All do the same
And yes I have seen "How to FIX INVALID MODEL ID after bad flashing " post but when I follow the thread through the forun I get to the fixing wifi using mtty, is this really all that needs doing. Does the mac address and wifi sort also fix the vendor ID?
Click to expand...
Click to collapse
from the readme doc in radio 1.58 upgrade
" ERROR [242] : INVALID LANGUAGE
ERROR [244] : INVALID MODEL ID
ERROR [294] : INVALID VENDER ID
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade."
Have you unlocked the phone?
read this
http://forum.xda-developers.com/showthread.php?t=429013
Yep thanks, aware of that and already new it was invalid model ID hence why its in my post. It a freinds Athena running SPL1.2 Mine on 3.5. We have both tried a number of roms previously and this happened when going to michy 6.1 for SPL1.2. (Note I had no issues on the SPL 3.5 athena).
Its odd, but what I really wanted to know was why when you follow the forum thread through on how to fix this you end up getting to the mac address fix using mtty? Why would the MAC WiFi fix fix the invalid model ID?
The Invalid model ID that that thread was for was caused by trying to flash a 3.5 ROM on SPL1.2which messed up all sorts of things.
Have you tried flashing the ROM you were using before?
btbill said:
Yep thanks, aware of that and already new it was invalid model ID hence why its in my post. It a freinds Athena running SPL1.2 Mine on 3.5. We have both tried a number of roms previously and this happened when going to michy 6.1 for SPL1.2. (Note I had no issues on the SPL 3.5 athena).
Click to expand...
Click to collapse
more information is good,better than mind reading!
My point was as confucious pointed out , you need to flash the right SPL version
btbill said:
Its odd, but what I really wanted to know was why when you follow the forum thread through on how to fix this you end up getting to the mac address fix using mtty? Why would the MAC WiFi fix fix the invalid model ID?
Click to expand...
Click to collapse
The reason they are both together was that cmonex was talking people through fixing both these problems on irc and eventually got sick of this so wrote a script to fix both problems at once.
Have you checked your SPL from bootloader? Sometimes it is not what you think and you will be able to see if the model id is corrupted.
I don't know your level of knowledge and if you have tried to flash from bootloader or can boot into an OS and are trying to flash via active sync.
It would also help to know what radio you had installed and if you are using vista/xp withh the appropriate Dotnet package
When you see someone with only a few posts asking for help, most people assume you don't have a lot of experience flashing roms
Thanks for the notes. Yes I tried to reflash from the bootloader. This is the first thing I tried. This where It all looks good then as the rom is progressing in the update bar on the PC and the grey screen you get on the athena. It never gets past 1% and then comes up with the error as described, the 244 error. BTW I have just done MTTY stuff..... holding breath now as try to reflash with a SPL1.2 R5.1 Michy.
Hey Worked, good stuff! always nice to know why you are doing something. So now we have a ROM with SPL1.2 we are now going to load the officeal AP4 latest as I am using on mine and I love it.
AP4 is quite old now - have you thought about Michy's ROM which comes in 1.2?
Mac address
btbill said:
thanks for the notes. Yes i tried to reflash from the bootloader. This is the first thing i tried. This where it all looks good then as the rom is progressing in the update bar on the pc and the grey screen you get on the athena. It never gets past 1% and then comes up with the error as described, the 244 error. Btw i have just done mtty stuff..... Holding breath now as try to reflash with a spl1.2 r5.1 michy.
Hey worked, good stuff! Always nice to know why you are doing something. So now we have a rom with spl1.2 we are now going to load the officeal ap4 latest as i am using on mine and i love it.
Click to expand...
Click to collapse
hi there,
i wanted to know that i am facing the same problem that u faced earlier. And u figured out the way to exit that problem through mtty and mac address.
My athena is stuck the bootloader screen so how can i get the mac address of my athena?
Is it printed somewhere on the device or do it comes with the manuals?
Help needed in this regards.
ERMANO.ESTE said:
hi there,
i wanted to know that i am facing the same problem that u faced earlier. And u figured out the way to exit that problem through mtty and mac address.
My athena is stuck the bootloader screen so how can i get the mac address of my athena?
Is it printed somewhere on the device or do it comes with the manuals?
Help needed in this regards.
Click to expand...
Click to collapse
It should be printed on the label inside the battery door cover, if not then i think you can find a piece of network equipment that you no longer use on your network and use that mac address.