After failed update Ive decided to go back to 1.66 imate rom ( my device is imate) but whenever I try to do it it gives me error ERROR 100 - deivce ID error. imate stuck in bootlader.
TIA
C'mon people, help me out here. I've tried all roms 1.52 original, tmobile, o2 - they all give me this error! Is there a way to avoid device ID checking?
Becare full you guys!! This ROM is FULL of ****!! Upgrade is OKEY!! But DOWNGRADE or STUCK in the MIDDLE while you UpGrade it, YOU WILL GET MODEL ID ERROR!! THAT"S FREAK!! Now my XDAII is DEAD!! itsme already try to help me with program language, but i donno using what and from where? And with what kind of tools? Any body wanna HELP me out here?
Related
I'm hoping you folks can help me out. I have tried to upgrade my XDA2 using the Himalaya_WM2003SE_Upgrade but it keeps coming up with:
"Error 150:ROM UPGRADE UTILITY ERROR.
This ROM upgrade utility does not design for your device.
Please get the proper ROM upgrade utility and try again!"
I've got:
FCC ID: NM8HIMALAYAS
IMEI : 351938002885560
Now the unit just gets to the bootloader "SERIAL, v1.06" until I put it in the cradle and it goes to "USB, v1.06". I ran the upgrade following the instructions to the letter but no joy! Am I using the incorrect upgrade utility as the error message says or am I missing something? Any help to restore my XDA2 will be gratefully received!!!
Thanks again!!
which rom are you tryin to upgrade to and provided by who ???
regards
jeetz
I'm basically trying to upgrade my O2 PH10B XDA2 to anything that works! It seems whatever I try, it stays on the bootloader screen with either "Serial or USB" on the display depending whether it's in the cradle or not. I can't do anything with it. I've tried to use the "Himalaya_WM2003SE_Upgrade" utility but as I said, it just tells me that this is not corrrect for my device.
HELP!!
Thanks :roll:
try to reset your device and run himalaya upgrade again
I tried it soooo many times but I still get:
"Error 150:ROM UPGRADE UTILITY ERROR.
This ROM upgrade utility does not design for your device.
Please get the proper ROM upgrade utility and try again!"
I've even tried the O2 Xda_II_172181_Final utility but I still get the same thing. Why does it say it is not designed for my device when I have an O2 Himalaya? If anyone can help I will pledge my undying admiration and possibly even lay down my life for them if required! (sorry, that should have read "wife", not life!) :lol:
glt56 said:
I tried it soooo many times but I still get:
"Error 150:ROM UPGRADE UTILITY ERROR.
This ROM upgrade utility does not design for your device.
Please get the proper ROM upgrade utility and try again!"
I've even tried the O2 Xda_II_172181_Final utility but I still get the same thing. Why does it say it is not designed for my device when I have an O2 Himalaya? If anyone can help I will pledge my undying admiration and possibly even lay down my life for them if required! (sorry, that should have read "wife", not life!) :lol:
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=15382&highlight=
try mysterman rom from here dont go for himaupgrade and stuff try to run the setup direct with default radio ....
Success!!!!!
Finally managed to get my XDA2 back to life after some severe CPR & Mouth-to-mouth, and WM2003SEO2UKv2.rar. Thanks for all the suggestions and help.
I also now have a dead M1000.
Where did you get your rom that worked from?
Can you post it please?
Thanks
R
plsssssss help me i also have same problem plsss tell me how u get that pls
:? :? I've tried to update my ROM from 1.72.104 to 1.72.190 , but I got an ERROR 100 :MODEL ID ERROR on my MDA II.
It won't startup and on my screen appears USB v1.03.
I need some help plz.
Hi everyone
I'm new to this message board and need some help I hope some one can help. Ok here goes I have today tried flashinng the ROM on the SPV M1000 which is the same phone as an XDAII just orange branded.. when I went to teh orange site and downloaded the rom update v3.66.1.230 and followed the instructions and got the following error message ERROR 120 : COUNTRY ID ERROR 0-0-4-4-4 and the phone / Pda is constantly stuck on and on the screen of the phone it reads Serial on the top of the screen and v1.06 at the bottom.
can anyone please tell me how to fix this problem. I'm not very technically minded when it comes to these things so instructions in laymans terms would be greatly appreciated.
Thanks to every one in advance.
[email protected]
m1000
the unit is stuck in what is known as bootloader mode.
Did download the rom that matches your contry of origin, ie uk for uk phones.
I flash these units all the time at work and dont have a problem.
You can sometimes get the phone out of bootloader by re-running the upgrade. Try downloading it again and running it.
Hi there,
Although a frequent reader, this i my first post and I NEED YOUR HELP.
Total loser that i am i accidently run the HimaClearJumpCode.exe on my himalaya instead of the HimaGetDeviceData.exe. And as you stated in another topic: (Warning: DO NOT under any circumstances copy and run HimaClearJumpCode.exe on your device as it will render it unbootable. It is used by the upgrade utility to put you device into bootloader mode prior to upgrading.)
I am now properly F*CKED, please help!!!!!!!!! (if there is a way out of this...) Please also note i do not have the proper country id code to install a new ROM ( Orange Netherlands), which is what started this mess.
Humbly hoping for your help...
Arnout
[email protected]
msn: [email protected]
fixed!
thanxs to evert-999 (thanxs, mate!!!!!) i was able to overcome the country id error and install wm2k5. After this everything works again!!!
Only thing weird is i still get a windows mobile 2003 screen when i reboot...does everybody have this?
ba bootloader serial v2.06
I suffered the same. so u have company.
Ifailed in my upgrade on my ba from radio rom v1.12 to v1.13. my ba got stucked in the bootloader mode in the course of upgrading.I cannot secure the ppc data. I have to downgrade it from rom v1.40 to v1.31 to FREE it b4 I upgrade back to rom v1.40 again with radio rom v1.12 I tried twice and the same thing occured. for the time being I have to be contented with my v1.40 and radio rom v1.12.
any insight on where I went wrong?
Stuck in bootloader
I GOT THE SAME PROBLEM-STUNK IN BOOTLOADER...WT CAN I DO??
IS IT GOING TO UPDATE THE ROM?? BUT GOT ANOTHER PROBLEM WHEN I UPDATE IT IN STEP 1 - ERASING THE ROM...STUCK AGAIN...THEN IT SAY ERROR 112.......
I REALLY NEED HELP...
ANYONE CAN HELP ME, PLz email me.....?
thx..
AKELA
[email protected]
--------------------------------------------------------------------------------
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
Dear friend
I think you have to install the original rom on your phone , not another cooked ROM.
If you can do that , your phone will be downgrade to original spl .
dead htc advantage
kanwalgee said:
--------------------------------------------------------------------------------
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
Click to expand...
Click to collapse
my frnd i got the 100% same problem pls do let me know if u could get rid of it im also trying my best to solve this but im still there....
Set your wifi adress with Mtty software after that upgrade with original rom all ok.
dead athena
kanwalgee said:
Set your wifi adress with Mtty software after that upgrade with original rom all ok.
Click to expand...
Click to collapse
hi my frnd but mitty is giving me an error msg could u pls let me know how could i get orginal rom and how could i flash it...