Failure ROM update MDAII - MDA II, XDA II, 2060 ROM Development

:? :? I've tried to update my ROM from 1.72.104 to 1.72.190 , but I got an ERROR 100 :MODEL ID ERROR on my MDA II.
It won't startup and on my screen appears USB v1.03.
I need some help plz.

Related

ERROR 100: DEVICE ID ERROR PLZ HELP

After failed update Ive decided to go back to 1.66 imate rom ( my device is imate) but whenever I try to do it it gives me error ERROR 100 - deivce ID error. imate stuck in bootlader.
TIA
C'mon people, help me out here. I've tried all roms 1.52 original, tmobile, o2 - they all give me this error! Is there a way to avoid device ID checking?
Becare full you guys!! This ROM is FULL of ****!! Upgrade is OKEY!! But DOWNGRADE or STUCK in the MIDDLE while you UpGrade it, YOU WILL GET MODEL ID ERROR!! THAT"S FREAK!! Now my XDAII is DEAD!! itsme already try to help me with program language, but i donno using what and from where? And with what kind of tools? Any body wanna HELP me out here?

plz help, i-mate dead after failed flash, error 101

hi everyone,
i have a huge problem. my rom flash for my i-mate (qtek 2020, mdaII, XDAII) hung during flashing (from 1.66 to 1.72 official i-mate rom) during the ce upgrade step 2. now my i-mate just hangs at the blue i-mate screen and i cant connect to it through pc anymore, get error 101. is there any way to get a good rom on it again (can i connect to the ppc by another way, other software or sd-card0 so it will work again, or does it have to be epaired at at a rapaircenter?
thnx, sorry for the bad english
See the pm i send you.
I have the same problem ...
plz tell me how u solve it
Best regards
plz help, i-mate dead after failed flash, error 101
Hi,
If all that happened was it hung during upgrade you can put the device into bootloader, power+d-pad+softreset button, and attempt upgrade again, but if OS you were upgrading to is corrupt causing the hang a new rom might be the way to go, www.buzzdev.net has everything i needed, or clubimate.com
I have same problem. My q-tec100 is reseting so I can' connect it to pc for flashing again. Please tel me what is bootloader and what is d-pad button so thad i can stop it from reset and connecting for flash
hi friends i have the same prob. somebody plz help me too

how to downgrade athena100 spl-v1.20oilpro to factory defalt plz help me????

--------------------------------------------------------------------------------
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
Dear friend
I think you have to install the original rom on your phone , not another cooked ROM.
If you can do that , your phone will be downgrade to original spl .
dead htc advantage
kanwalgee said:
--------------------------------------------------------------------------------
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
Click to expand...
Click to collapse
my frnd i got the 100% same problem pls do let me know if u could get rid of it im also trying my best to solve this but im still there....
Set your wifi adress with Mtty software after that upgrade with original rom all ok.
dead athena
kanwalgee said:
Set your wifi adress with Mtty software after that upgrade with original rom all ok.
Click to expand...
Click to collapse
hi my frnd but mitty is giving me an error msg could u pls let me know how could i get orginal rom and how could i flash it...

Herm300 Radio problem?

Hi,
I have MDA Vario II, aka Herm300, aka Tytn ... My problem is that I've got "No GSM". So I got in forum and checked how to try to Fix it threads... So I tried by putting "Hard-SPL" and also I've tried to Upgrade "Radio", but every time when I start upgrade I recieve "Error 262" at 0%, I changed several Radio's but I had always same result. Also I've tried to downgrade to Official Rom of WM5 and it stops at 13% witn "Error 262" . So my Question is:
Is it possible that I have hardware problem not radio problem .
ATM it works fine with Schap's ROM as PDA and "No Gsm" Again ...
On Bootloader I got:
IPL-1.01
SPL-1.40.Olipro
If there is another solution that may help I'm open for advice.
classic brick...
wich one is the 262 error. (why to put the error number? write the entirely error!)
Dunno if it is brick, because I cant update with most of the roms and also I get error with every radio I try to update with ... I've tried with more than 10 radio's from the archive ...
P.S. I think it is Hardware problem + I got brick and because of the hardware problem i cant reinstal rom+radio or rom to repair brick problem ...
So wich one is the error??????
error 206 207 200768 i dont know...i have this issues too and the cprog.exe seems to be incompatible ... my cable hasnt a good contact to the usb plus the rom i had i didnt downgrade to wmoriginal in a few times...
-Mobile MDA Vario II - help my screen is four colours
Hi I have the same phone a T-Mobile MDA Vario II i ran unlock program HTC_Hermes_SIM_CID_Unlock_v3a - i must have run it wrong or something cause my phone has colours on the screen red green blue white with the ipl 1.01and spl 1.40 - it used to ipl 1.4 (ithink) and spl 2.14(i think) before i tried to run the hct_herm.....v3a.
Is my phone trashed or what can i do . when i plug in the usb cable the message at bottom goes from serial to usb but thats it - the active sysnc does not see the phone. help help help any advice welcome ( short of buy a new phone) this is my new phone i only got it a day ago.
tks

O2 MOT synch failed error and only o2 logo

my atom o2 shows this error on phone while flashing windows 6.5 rom..
write extended rom..
Please wait...
MOT Sync Fail 0xFF...
and on pc it stuck on Burn radio stack .........and than failed...
My o2 only show O2 logo and than turn of....
help me what to do

Categories

Resources