hallo,
ofther changing batterey i got the error of a .exe file that doesnt work annymore. Agenda and contacts aint working anymore. Now i want te reset my device but the only thing it does is a soft reset. I tried manny combo's bot nothing works, including power+camera+record+reset, but doesnt work either.
hope you guys can help out.
if you can get into the bootloader you can format the nda / storage or what ever it called it
thats the same as a hardreset
Remember that when you do the power+record+camera+reset buttons, you HAVE TO HOLD ON ALL DEPRESSED FOR AT LEAST 7-10 SECONDS.
CHEERS
Victor
doesnt work
sorry mate but it doesnt work, i get a bootscreen like menue but it doesnt woth some settings but i cant controll them. when i go in to normal bootmode and than reset i get no change eather, normaly this will hard reset the device as well.
Ooooh ....
this information can be found in 2 896 642 554 225 post of this forum ...
to change value on the boot menu , you must use ..
RECORD button to navigate on 3 lines ...
CAMERA button to change the value of them
Re: doesnt work
sjoerd666 said:
sorry mate but it doesnt work, i get a bootscreen like menue but it doesnt woth some settings but i cant controll them. when i go in to normal bootmode and than reset i get no change eather, normaly this will hard reset the device as well.
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=24411&highlight=kitl
I found it here. PS dont blame me The search engine sucks in this forum
Related
hi everybody..
i've got a serious problem..
here's the story..
i was trying to upgrade to the touch v7 by mr. gullum.
after downgrading my prophet to the no vendor id rom, i upgraded my device to the touch v7.
next i tried to hard reset my prophet, realised that i can't do it cuz my camera button is not working.
went to a phone repair shop and fixed the button..the solder was..loose? i mean, the thing was unconnected from the pcb.
fixed it and tried to hard reset again.
black screen of hard reset appeared, but when i released the comm button, it went straight to the white screen showing os ver and ipl, spl ver.
tried to hard reset again and failed, it entered the white screen where we can restore rom dumps..i immediately pressed the comm button and camera button again..and it started formatting the bnfs..thing?
still can't do hard reset, tried to flash the no vendor id again, and this is the problem..i get stuck on 95% and after that it jumps to 100% straight away.
tried to flash gullum's touch v7 but i got the message that no device detected...tried pv 5.0.0.0.5b, pv 4.00.0.6, nanoscopic all with same result...
anyone can help?
oh maybe this will help:
when i tried to flash the no vendor id again, what shows up is this..(see attachment) the from image version is blank..
on the 95% where i get stuck, the progress bar on my device turns red as when it happens on the 80%.
thank you, everybody...
jimtoyz said:
hi everybody..
i've got a serious problem..
here's the story..
i was trying to upgrade to the touch v7 by mr. gullum.
after downgrading my prophet to the no vendor id rom, i upgraded my device to the touch v7.
next i tried to hard reset my prophet, realised that i can't do it cuz my camera button is not working.
went to a phone repair shop and fixed the button..the solder was..loose? i mean, the thing was unconnected from the pcb.
fixed it and tried to hard reset again.
black screen of hard reset appeared, but when i released the comm button, it went straight to the white screen showing os ver and ipl, spl ver.
tried to hard reset again and failed, it entered the white screen where we can restore rom dumps..i immediately pressed the comm button and camera button again..and it started formatting the bnfs..thing?
still can't do hard reset, tried to flash the no vendor id again, and this is the problem..i get stuck on 95% and after that it jumps to 100% straight away.
tried to flash gullum's touch v7 but i got the message that no device detected...tried pv 5.0.0.0.5b, pv 4.00.0.6, nanoscopic all with same result...
anyone can help?
oh maybe this will help:
when i tried to flash the no vendor id again, what shows up is this..(see attachment) the from image version is blank..
on the 95% where i get stuck, the progress bar on my device turns red as when it happens on the 80%.
thank you, everybody...
Click to expand...
Click to collapse
In my experience, what you describe is very normal . The RUU seems to stop at 80% and again at 95%. So far nothing out of the ordinairy.
But after that the device should start up and reconnect with ActiveSync. When it tries to pair choose "connect without setting up your device" (or something like that, I'm translating from dutch). After that, it should be no problem to run Upgrade.bat from the WM6 ROM of your choice.
For more detailed describtion, read the upgrade guide.
try any of this roms (http://forum.xda-developers.com/showthread.php?t=316062)... maybe you have spl 3.08???
it's not that..
hi there,
it's not that usual mistake people make..i think i've screwed my hardware too..
now, my previous problem was unable to hard reset because my camera button was not working..the solder was loose..
i've soldered it and the problem was after every succesful attempt to flash 'no vendor id' rom, it resets and goes to bootloader screen again (tricolor screen)..
late last nite, i tried to hard reset after succesful flash of 'no vendor id' rom (after it resets and enters the bootloader screen)..i succeeded to get into the black screen of hard reset but when i released the comm button, it went straight into the htc white screen without me being able to press any button at all..
everything went well though, and it went to the 'tap screen to set up your device'..at this point i tried to flash the 'nanoscopic' rom (last rom i use before i messed up this phone)..it went well!
after succesful attempt, i tried to hard reset again (no luck again), but after the htc screen shows up, the nanoscopic splash screen appeared!!!
whew, i thought i had my phone fixed already, but when i did a clear storage, it resets and enters into bootloader screen again! i tried soft reset via software and via manual way, and it enters the bootloader screen everytime!
now, i've fiddled some more and i now realise that just by pressing the comm button and doing soft reset can make me go into the bootloader screen..i'm guessing that the technician at the phone shop soldered wrongly...and now my comm button works as camera button too..
i think he accidentaly soldered some other button too to the comm button and that's why i always get into the htc white screen after i release the comm button in the black screen of hard reset..
i'm going to go back to the shop again after work today, but i'm still confused about the way my device enters bootloader after every reset (hard reset and soft reset)..
a friend gave an opinion that maybe, like in desktop, (there's the bios then there's the operating system), the 'bios' of my device is ****ed up?
any help greatly appreciated!
another possibility
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
jimtoyz said:
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
Click to expand...
Click to collapse
It lookslike something is screwed-up... And I agree with you that the cam-buttonis most likely... Succes anyway
jimtoyz said:
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
Click to expand...
Click to collapse
i think your camera button connection is short (always pressed down) if you get to hard reset screen by only pressing the comm manager button.
hmm...
too bad..yesterday the technician was out of tow..think i'll go there again this afternoon after work..
wish me luck..
NVID Success
I've got the camera button fixed, and i've flashed the NVID rom succesfully!
i'm now in the process of flashing the Transformer 1.0 by Cloudyfa..
All the best to me!
it's done!
it's done!!!
it's fixed!!!
HOOORRRRAAAAAYYYY!!!!!!!!!!!!!
Thanks for everybody who tried to help me!
Terima Kasih!*
*thank you in indonesian language
jimtoyz said:
it's done!!!
it's fixed!!!
HOOORRRRAAAAAYYYY!!!!!!!!!!!!!
Thanks for everybody who tried to help me!
Terima Kasih!*
*thank you in indonesian language
Click to expand...
Click to collapse
CONGRATULATIONS!!
Hello.
I just flashed to DCS Touch Pro v14 ROM.. Everything was ok, but when I restored the backup from SPB Backup, device made soft reset and then started my problem.
When I turn it on, it goes to startup HTC animation and then freeze on it.
Is there any way to hard reset or anything that would help me??
Please :-(
You have this info on the Wiki...
http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners
The Wiki is our friend
Cheers
Press :
Vol Down Button + Center Round Action Key + Reset Hole
> Prompt > Vol Up Button > Finish > Vol Up button.
Hope this help.
Lanyz said:
Hello.
I just flashed to DCS Touch Pro v14 ROM.. Everything was ok, but when I restored the backup from SPB Backup, device made soft reset and then started my problem.
When I turn it on, it goes to startup HTC animation and then freeze on it.
Is there any way to hard reset or anything that would help me??
Please :-(
Click to expand...
Click to collapse
Press volume buttons (inferiors) and soft reset at the same time.
When the screen go to about bootloaders still soft reset and "prays".
Bye
Many ppl trying to help
i love this forum...
I just solve it... Thank you for your advices..
Standard hard reset (Vol down + Center button + REset) didn't work - device must be on.
I tried this - Vol down. + Center button and turn on the device, that worked.
Once again thak you.
jcespi2005 said:
Many ppl trying to help
i love this forum...
Click to expand...
Click to collapse
I love this forum very much too But I wont post the previous one if I can see ur post | my connection is lagging like lazy dog
hang.tuah said:
I love this forum very much too But I wont post the previous one if I can see ur post | my connection is lagging like lazy dog
Click to expand...
Click to collapse
ey man, don't care about it... this is just for fun, you know...
Cheers
i just want to thank everyone who participated and answered this.
i almost ****ted a brick a few min's ago..
my device just stopped working it was real weird.. All was fine then i get a error msg saying that "Gyrator has encounterd an error" and BAM black screen. and no matter how many soft resets and batt pulls nothing worked.
so i immediatly signed on here..searched for about 30 seconds and with the 3 key press..all was good..device booted properly, configured itself, and im back on track.
Thanks,
Jstar
I tried the restore and it will not work for me. I can get to the boot loader screen, but it only shows serial and won't let me do anything else.
scaz24 said:
I tried the restore and it will not work for me. I can get to the boot loader screen, but it only shows serial and won't let me do anything else.
Click to expand...
Click to collapse
You need to get out of the GSM rom forum and go to the raphael CDMA forum. Anything you try to flash from here will not work on your device and my brick it.
http://forum.xda-developers.com/forumdisplay.php?f=465
Until you understand the difference between the two standards you shouldn't be flashing anything, as it will not be safe.
Hello ,
my HTC Touch pro was bricked few months ago
i installed WRONG hard spl
on pc it showed 100% Completed
but i couldnt start my phone
how can i fix this ?
if i use Hard Reset method, i doesnt work , i cant start my phone
have you tried installing a new SPL via storage card (rename spl file to RAPHIMG.NBH and place it on the storage card) and enter bootloader mode by holding the vol down button when powering on the device?
the problem is
i cant start bootloader
nothing is working
I think you got yourself a brick...
Does it at least vibrate?
Run SPLExploit!
Dude, i have the same problem with you too but its not my TouchPro but its my old school Dopod D810. I flashed custom rom (my home cook) but forgot to add sumthin and finally i learned somethin that i can ****up my phones LOL. Just like what i thought my phone wont start and it refuse to enter on Windows OS but atleast bootloader mode still accessible. Thanks God
I search for post how to recover bricked phone (ofcourse on trinity room) and found some tools call "SPLEXPLOIT" it runs on DOS Mode. This program can erase your nand memory which in this case you flashed the wrong SPL and will rebuilt some bad Nand memory too. Good tho
I finally can bring my dead dopod came to life (for almost 1 year i left it on garage) lol. Just asked cmonex! maybe he can help you...
If this tools works universal i'm sure it will worked on TP too! Just asked cmonex for more details...
Run SPLExploit (as Administrator) --> while Enter in Bootloade mode -->
Just make sure that USB Cable was recognized as "USB" on the bottom of the screen not "Serial"!
When its done ....
NOTE: "Dont Soft Reset the phone even when SPLExploit ask you to SR the devices" just go ahead straight away flashing new custom rom or anything you want
Goodluck!
The OP can't get into bootloader, because the bootloader is corrupted/dead. So that isn't going to work.
JTAG is the only way to fix it, and as far as I know, no one knows how to do it on a Raphael.
Maybe playing with BIOS ( if BIOS can be accessed ) might help.
But BIOS can really make ur brick a worse brick if done wrongly please ask for help from the senior most members on Raphael forums.
And request them don't order them.
And if nothing works * I love to say this line *
You Just got Yourself a New Shiny Fine Edged Black Clear 600 U.S. Dollars worth Of a BRICK ! Enjoy !
atjee said:
the problem is
i cant start bootloader
nothing is working
Click to expand...
Click to collapse
Do you tried to start bootloader manually?
You can do that, press and hold Vol down, then reset button (with stylus), release reset (keep vol down pressed) and when the multicolor screen appears then release vol down key
I hope this can help you?
iugalde said:
Do you tried to start bootloader manually?
You can do that, press and hold Vol down, then reset button (with stylus), release reset (keep vol down pressed) and when the multicolor screen appears then release vol down key
I hope this can help you?
Click to expand...
Click to collapse
That is the only way to go to bootloader but as Farmer Ted mentioned his phone ( including bootloader is dead ! )
So i don't think there is any way out for you except if any really senior members can help you with bios or pump in something which starts your bootloader !
atjee said:
Hello ,
my HTC Touch pro was bricked few months ago
i installed WRONG hard spl
on pc it showed 100% Completed
but i couldnt start my phone
how can i fix this ?
if i use Hard Reset method, i doesnt work , i cant start my phone
Click to expand...
Click to collapse
Dude, you might try to PM cmonex. I hear she can do miracles. You can check out this thread and see a miracle there. Who knows? See what can be done. This link will take you to her contact page: http://forum.xda-developers.com/member.php?u=322932. Best of luck to you my friend. Worst case scenario, sell it for parts. Several people around here are always looking to replace "stuff", including me .
the same problem
I did the same thing to my HTC Fuze aka rafael or touch pro, from some reason it was the same thing as diamond and i flashed wrong spl and completely bricked it, no bootloader no nothing. So i went to a service and they said it was a hardware problem so they had to send it somewhere else to be fixed. It took them 3 weeks to get the phone back, in not working condition saying that motherboard was dead. I guess thats what happens when you flash wrong stuff... Now i dont know what to do either. I would like to sell mine for parts if someone is interested or if someone know how to use jtag i would pay him to try to fix it...
Here's how to 'hard reset' your TG01!
- Power off device
- Hold down 'volume up' and 'camera' buttons
- Press power button
- Follow on screen prompts
Sorted!
Original thread: Modaco forum
Thank you for the advice.
Thanks for help
Thanks for help
I've followed your instructions and succeeded 100%
Best Regards,
Bassam
how long will the toshiba logo stay?
edit:
ok after hard reset i have to do the short pin method
thanks anyway
fantomel said:
Here's how to 'hard reset' your TG01!
- Power off device
- Hold down 'volume up' and 'camera' buttons
- Press power button
- Follow on screen prompts
Sorted!
Original thread: Modaco forum
Click to expand...
Click to collapse
elder T said:
Thank you for the advice.
Click to expand...
Click to collapse
bassam777 said:
Thanks for help
I've followed your instructions and succeeded 100%
Best Regards,
Bassam
Click to expand...
Click to collapse
DeeJay05 said:
how long will the toshiba logo stay?
edit:
ok after hard reset i have to do the short pin method
thanks anyway
Click to expand...
Click to collapse
What about 'Master Reset' option in settings where you enter you pin i.e. 1234, press 'reset' and it hard resets the phone? :s
drupad2drupad said:
What about 'Master Reset' option in settings where you enter you pin i.e. 1234, press 'reset' and it hard resets the phone? :s
Click to expand...
Click to collapse
This is if you have a unbootable phone that cant get into windows. the only option is to use this method
hi
emergency PLEASE help me
i lost my tg01 boot i cant hard reset and pin flash
olyloh6696 said:
This is if you have a unbootable phone that cant get into windows. the only option is to use this method
Click to expand...
Click to collapse
yea it erase the nand flash like a format and the the drive is real clean and only toshiba logo is displayed
shahryarkh said:
hi
emergency PLEASE help me
i lost my tg01 boot i cant hard reset and pin flash
Click to expand...
Click to collapse
read this:
tg01 two brick variants how to unbrick
and do this:
2 Short-Pin unbrick method
1. Copy a functional ROM on SD Card. PRG folder
2. Rename to TG01WP_00.enc
3. Put the battery in and plug Power- Kable. Charging LED flash RED *
4. short pin 1 and 3 (back side under sim card, remove black plastic) Hold the short and RESET. Hold short pin 1 and 3 for 10 sec. Display go on and ROM flash beginn
* if red led not flash- use TG Downloader unbrick method with user manual in german (pls translate with google translator for other languanges)
contains: TG01 Downloader TG01 Driver TGTool
guys .. need a little help ... i installed tf 3d and when i restarted .. the phone just stands at "starting windows" .. any advice?
edit:
so i tryed to enter boodloader but no success what so ever .. eventually i used short pin method .. oh.. and i must say it was a breath taker ... now the phone works ok ...
warcaller said:
guys .. need a little help ... i installed tf 3d and when i restarted .. the phone just stands at "starting windows" .. any advice?
Click to expand...
Click to collapse
If a soft reset doesn't work then hard reset, hopefully you installed from a fresh rom flash/hard reset anyway?
warcaller said:
guys .. need a little help ... i installed tf 3d and when i restarted .. the phone just stands at "starting windows" .. any advice?
edit:
so i tryed to enter boodloader but no success what so ever .. eventually i used short pin method .. oh.. and i must say it was a breath taker ... now the phone works ok ...
Click to expand...
Click to collapse
tf3d never causes me any of these problems, what ROM were you on?
Thank you
... this saved my Day.
I wasn't able to do a Master Reset after Flashing.
OK, so after trying out the last android build from Markinus, winmo is now saving text messages to the SIM.
If I do a 'hard' reset, what will I lose on my phone? (contacts/texts/email setup etc??). Please explain the downside of hard reseting. Thanks! (or basically.. will I need to save/backup anything before hard resetting?)
Also: Will it remove the 'unlock' that I have applied to my phone?
Update: Well I did it anyway. Saved my contacts, but that's about it lol. Hopefully this will get my messages to saving back into memory rather than onto the sim.
Hi Everyone,
I have a Samsung Galaxy 5 I5503. My small cousins played with it and put in the wrong pattern to unlock, now i cant even login (gmail) to unlock my phone.
I have decided to hard reset it. but pressing Vol up + Center button + Power button does nothing the download mode works.
Can some one suggest how i can workaround this?
I am even ready to flash it but can someone give me a step by step info i will be greatful.
Thank you all XDA Members
http://forum.xda-developers.com/showthread.php?t=781149
Here you can get step by step procedur for flashing your G5.Keep in mind that touchscreen wont work if you flash the firmware of i5508.
thank you ramu.rocks4u, i saw this thread and followed it and u are rite the touch does not work. but even after the flash, the phone still asks for username and password.
I tried different ways of hard reset and factory resets but none work.....
Need help???
any solution for this problem??
deadmantfa said:
thank you ramu.rocks4u, i saw this thread and followed it and u are rite the touch does not work. but even after the flash, the phone still asks for username and password.
I tried different ways of hard reset and factory resets but none work.....
Need help???
Click to expand...
Click to collapse
Do you know you username but not your password, or know neither of them?
Sent from my Galaxy5 using XDA Premium App™
Hi, a friend has this same problem but we don't really want to flash it, i read that there's a way to factory reset pushing some buttons...does anybody know which buttons are? thx.
darthjp said:
Hi, a friend has this same problem but we don't really want to flash it, i read that there's a way to factory reset pushing some buttons...does anybody know which buttons are? thx.
Click to expand...
Click to collapse
looking 4 d same
i heard that if you plug it into kies, you can somehow download a file that automatically factory resets your phone, probably designed for when this happens. Maybe you could try looking around on there or something? (i cant confirm it as my phones cm)