Backup current ROM - MDA II, XDA II, 2060 ROM Development

How do it? I know its stupidity :lol:
but I need this ROM

try here
http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=151&PN=1

ok! but if I can't connect with port \\.\WCEUSBSH001... once I connected but I couldn't write letter :?

can't backup rom
I also seem to have a problem finding WCEUSBSH001, I place device in bootloader mode and stop active sync then start the backup program but it only offers defasult com ports 1 to 7 if I type it in manually it returns an error.
Any clues from the Gurus out there greatly appreciated by this computer literate but PDA virgin confused person.
Thanks
Terry

Related

how to load ROM from Boot Loader screen on I-mate PPC 2003

I would deeply appreciate someone informing me how to reload the rom on my PPC i-mate from scratch. I completely zapped it . The screen just shows USB V1.01 and thats it.
What do I do from here?
How do I talk to the device to reload the image file?
Is there a hard reset and some kind of installer program to run that the computer will detect the device from this state.
Active synch is not detecting the device i assume because there is no operating system on the device.
Another form said to get a new rom and reflash but how do I do this , where do I start.
Regards Jim Mete :?:
reload rom from boot loader stage
I am interested to know how to reload the rom from scratch.
Jim
Come on, Jim.
The forum is full of topics and postings with the informations you're asking for.
Move your mouse, click on and search the forum.
Chuck

at command help

hey I am hoping someone here can help me out I am trying to find away to get my htc wizard to respond to at commands so that the phone can be accessed via a pc phone utility. I have had no luck locating something if someone here can suggest something it would be great.
Thanks,
yonu

[Q] Root/Recovery Hapai X720D MTK6577

I have been looking in different places for a guide to root the device Haipai x720D and i have seen different ways of doing it but a lot of them are in another language or appear not to be really trusty so i am afraid of trying any of them and end up with a brick..
Could someone post a step by step guide to root this device?
Alpuy said:
I have been looking in different places for a guide to root the device Haipai x720D and i have seen different ways of doing it but a lot of them are in another language or appear not to be really trusty so i am afraid of trying any of them and end up with a brick..
Could someone post a step by step guide to root this device?
Click to expand...
Click to collapse
up
Alpuy said:
up
Click to expand...
Click to collapse
up
Alpuy said:
up
Click to expand...
Click to collapse
## (1) and (2) only for recovery if you experience boot failure
1) Download files for x720d here: http://www.4shared.com/rar/YsR3RDi-/..._Recovery.html
Password is Taiwan101
2) Use flashtool 4.0 and recover your x720d
Original link for (1) and (2) is here http://www.mobile01.com/topicdetail....&t=2934258&p=3
##(3) and (4) are the rooting process
3) After flashing the recover images, boot your phone and ensure its not rooted
4) Use TPSparkyRoot to root your x720d. Link is here http://forum.xda-developers.com/show....php?t=1646544
Follow on-screen instructions. Few re-boots to be done before you are rooted.
Walla. Your x720d should be recovered and rooted.
i made a miztake
Hi everyone,
** EDIT **
i have flashed my x720d with the files posted by "haipai" just above
but now my phone wont boot, and i cannot connect it to my computer
i think he's briked but i hope there is a solution...
Thanks for your help
Nitrogin said:
Hi everyone,
** EDIT **
i have flashed my x720d with the files posted by "haipai" just above
but now my phone wont boot, and i cannot connect it to my computer
i think he's briked but i hope there is a solution...
Thanks for your help
Click to expand...
Click to collapse
also happened to me ...: Rolleyes:: Rolleyes:
before the flash must be clear PRELOADER flag!"!!
to repair the damage, you must:
1 - open the phone by removing the screws.
2 - with a piece of wire to ground the point KCOLD connecting to a screw of the case
3 - press download the original firmware
4 - connect the usb cable and insert the battery (keep it IN POSITION TO END)
5 - cross your fingers : D
sorry for my english ... I'm Italian and I translate with google translate
Tanks for the answer but it look not so easy, where do you find the solution, or maybe a tutorial ??
i don't understand the following sentence
with a piece of wire to ground the point KCOLD connecting to a screw of the case
tanks for the help !
ps : i dont wanna brick it again, where do you found a good firmware ?
up
sorry to keep you waiting!
I understand your situation
look at the first image in the bottom of the post
http://forum.xda-developers.com/showthread.php?t=1943442 or http://forum.xda-developers.com/showpost.php?p=32424838&postcount=616
original ROM
H630_77v01.01b02.rar (214.6 MB)
https://mega.co.nz/#!bcMiWbyK!evXGQURvRVkS7mKUSL_royv-cZQd7rsgP4851xNnP8Y
I hope you will be able to solve
hi,
thank you for helping me, but
i must place a cable between the point "kCOL0" and which is the second ?
i dont have a multimeter or any other tool, i hope this is still possible
thanks
the multimeter is "comfortable" but not necessary. just a piece of stiff wire! kcol0 you connect with any part of the metal frame of the phone! for comfort under a screw, so one end of the wire is locked.
edit:
once flashed the rom, change imei codes! I hope you have it written down somewhere ... otherwise seek it from two old phones that do not use more!
Hi: I bricked my Haipai Noble x720d, it's an mt6577, i mange to dissassemble, i found "kcold" point, and now it can be plugged and recognized by usb port. The problem is that i cannot find a factory rom, and i was tryng to flash different roms and always same error with flash tools 4.0, the error is this:
BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL(5054)
[EMI] Obtain DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.
i don't know what that means, I dont know how to solve it, please if someone has a factory rom for that model, Help me.
ROM for x720d
http://forum.xda-developers.com/showthread.php?p=42248564#post42248564
igorilla666 said:
also happened to me ...: Rolleyes:: Rolleyes:
before the flash must be clear PRELOADER flag!"!!
to repair the damage, you must:
1 - open the phone by removing the screws.
2 - with a piece of wire to ground the point KCOLD connecting to a screw of the case
3 - press download the original firmware
4 - connect the usb cable and insert the battery (keep it IN POSITION TO END)
5 - cross your fingers : D
sorry for my english ... I'm Italian and I translate with google translate
Click to expand...
Click to collapse
hi
can you explain me where is the point kcold because i have brick my x720d with a wrong rom.
thanks
I donĀ“t understand it.
haipai said:
## (1) and (2) only for recovery if you experience boot failure
1) Download files for x720d here: http://www.4shared.com/rar/YsR3RDi-/..._Recovery.html
Password is Taiwan101
2) Use flashtool 4.0 and recover your x720d
Original link for (1) and (2) is here http://www.mobile01.com/topicdetail....&t=2934258&p=3
##(3) and (4) are the rooting process
3) After flashing the recover images, boot your phone and ensure its not rooted
4) Use TPSparkyRoot to root your x720d. Link is here http://forum.xda-developers.com/show....php?t=1646544
Follow on-screen instructions. Few re-boots to be done before you are rooted.
Walla. Your x720d should be recovered and rooted.
Click to expand...
Click to collapse
I have completed step 1 but I don't understand step 2. Can you put photo's by the steps? Already thanks!

[Q] Clockworkrec

I tried other forums now trying the best
I have been really dumb and bricked my Samsung Ace, I was trying to backup the ROM and used software found (apparently I can not link the page)
I have tried using ODIN but the computer while assigning a drive letter will not access the phone. I have downloaded Kiies but that does not work, I have tried holding the power and vol button but no
However I have access to System Recovery, where I get an error message of E:failed to mount, I have put clockwork rec on the SD card and there are various options including mounting objects.
I have now spent 5 days tring to resolve this so really looking for some guidance before I screw up even more
Or will clockworkrec not work
Any advice appreciated!!!
communication
Can I ask a question if anyone knows an answer.
How is it that the PC recognizes the phone and loads the usb drivers, modem and so on yet I can not access it?
Odin the new version wil not communicate with the phone but Odin 3.07 will recognize that is connected to the phone but will not communicate with it/
Does anyone know the answer?
Friend OK I insist u that try this method.
1) install USB drivers in pb
2)download any custom Tom
3)use yaffs tool to change system folder In .img file
4)flash it using ADT( android download tool)
If u need more help just PM me
I am an expert for flashing rom using adt coz I have bricked my phone 1000000 times and solved it using ADT.
HIT THANKS IF HELPED........
Sent from moon to earth........

Anyone here with a working GSmart Rey R3?

Can someone who has this phone please do me a favour? I bricked it and need a backup that can be used in Sp flash tool. If you have this phone, could you be so kind and make that backup then upload it somewhere I can download it and restore my phone?
Here is tutorial link: https://forum.xda-developers.com/showthread.php?t=2540400 (Dump rom section)
I don't need to enter Android, just recovery to flash stock rom, you don't have to worry about deleting personal data (put a PIN or something)
Thanks in advance!
EDIT: after 2 days of trying to fix this phone, I have finally found what I needed and successfully restored it. Now it's working!
This is the file: https://yadi.sk/d/t2ejuvsjg5GyW
Can you help me please.
My friend ask me to help him with this phone. It won't boot at all, and when I connect it to PC Windows make sound (USB Device connected) and after few seconds again (USB Device disconnected) and all over again. Nothing shows up in Computer window nor at Device Manager.
Can I unbrick it whit this files that you upload?
Can you write some instructions how to do it, please?

Categories

Resources