Can I UNLOCK with Serial Cable ??? - MDA, XDA, 1010 General

I have the WALLABY but can't use with my Orange SIM... is locked to T-Mobile..I need to unlock but the old 1.1 version of unlocker program can't unlock this Jan 2004 Wallaby I think I need to change the ROOM and after that... I will try with other tools like 1.3 xdaunlocker
I have only one 128 SD-Card and the serial (com1) cable...
Can I use this cable???

You could try xda manipulator with serial cable, it only works with certain radio stacks though.

Have you used the unlock tool for the Wallaby? It differs from the other ones...
Direct link is here:
http://wiki.xda-developers.com/uploads/XDAunlock.exe
Stefan

Related

Sim Unlock

I've just received an XDA2 that is locked to the O2 network.
I need to use a UK Vodaphone PAYG Sim in the XDA.
I've run xda2unlock but it tells me that the phone is allready unlocked.
Except, when I use my Voda sim the XDA still wants me to input a code into the SIMlock box!
Any ideas as to what the problem could be?
what do you mean ?
when you softreset your device and it want a code to do anything but
call alarm and such ?
because thats not a simlock code thats just the sim code
You probably followed the xda2unlock link from the front page of www.xda-developers.com into the wiki pages. In the wiki there is still the old version 1.2 of the tool, which doesn't seem to work on Radio 1.10 or so. At least on my UK O2 XDA2 I had the same behaviour as you described.
The good news is: there is a new version that does indeed work (at least, for me it did). Please go to http://forum.xda-developers.com/viewtopic.php?t=6963 where you will find version 2.2 of the xda2unlock tool. This is a program that runs on the PDA itself. It does not require the hard reset or the bootloader mode.
Hope this helps ... Kai
PS: I have updated the 2 wiki pages, to include links to version 2.2, too.

Cannot unlock with old method

Rom: 1.03.00 USA
Date: 09/24/03
Radio: 1.05.12
Proto: 1337.12
Tried to unlock with new method then realised that it is not the recommended one so I tried to follow the bootloader method instructions
Put the device into bootloader it displayed serial
Put it into the cradle and new device was detected by windows and it now displayed USB
Disabled USB in activesynch (I already have serial and remote disabled)
Ran the programme on my desktop
And then typed YES and pressed enter on the keyboard
and the dos box just diappeared tried it with both serial and remote eneabled in activesynch but no luck
I am using windows ME is that the reason or anything else i the instructions that I have got wrong please help
I dont think it works on ME, windows 2000 or XP only I suspect.
so there is no hope for me to unlock as both my computers have ME and I dont wanna change that
Can you use a pc at work, or maybe a friend has a pc running xp?
I shall try work im not sure if any friend would like me to use their computer
By the way why doent it work in windows ME

WALLABY UNLOCKER for T-MOBILE

Can anone tell me how i could unlock my wallaby lock on T-mobile?
i have already upgraded the ROM to 4.01.12
and radio to 4.21.00
protocol version is 32S54... but get Unlock Code screen everytime i insert my simcard...
please please please, im begging.... i read one article explaining about SpecialEditionROM but the link is dead... any option pls.???
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
T-Mobile Unlock
Lumpi,
I, too, have T-Mobile that I need to unlock. My problem is that I can't figure out how to install the XDA ROM that allows the unlock--the link at the bottom of the XDA page doesn't work.
Skip A
http://wiki.xda-developers.com/index.php?pagename=Wallaby
I can't open the step by step instructions for installing 'special edition 1.2'.
Some Wallabys don't support the GSM network that T-Mobile uses (at least in the UK), so if your phone works with other SIMs from Vodafone/O2 then chances are it will never work with T-Mobile. In this case, it's a hardware limitation and there is nothing that can be done about it.
Dear Stefan I want to meet u in person in stuttgart
LumpiStefan said:
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
Click to expand...
Click to collapse
Dear Stefan i will be in stuttgart for a church conference from 3 april to 12 april.
I have t-mobile wallaby PW10B1 ROM 4.02.04 eng 8/24/05 radio 6.18.00 protocall version 324e4. I am unable to unlock using xdadev_all_unlock.exe they give errors.the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working. can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
kjpeter said:
I am unable to unlock using xdadev_all_unlock.exe they give errors.
Click to expand...
Click to collapse
This is the wron tool. That does not work on the Wallaby device.....
kjpeter said:
the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working.
Click to expand...
Click to collapse
I think you´re concerning on, that the link for downloading is not working...
Try this one: ftp://xda:[email protected]/Wallaby/ROM/Special/special_rom_1.2.exe.zip
kjpeter said:
can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
Click to expand...
Click to collapse
GPS-receiver should be no big problem. It should be a gps-receiver with PS2/serial-Connector. Any USB wouldn´t work....
How dou you want to conenct a camera?
If you didn´t get the unlocking worked, we can try if we can make a meeting when you are in Stuttgart, than i will take a look at it....
Stefan
I downloaded SE rom 1.2 and when i run exe in dos window i have a message - ERROR GetConnectionType.
i used activesync 4.5 beta on xp .
(actually i had activesync 3.5 on my xp pc but on wallaby-activesync itsays incompatible activesync .so i changed from 3.5 to 4.5 beta )
any help stephen?
how to upgrade the activesync in my pda?
you dont
upgrade it
Try using the 3.7 or the 4.0/4.1 Version of Active Sync.....
Stefan
xda2unlock
I put in boot loader mode the pressing left side sound control switch put it in to USB flash mode and ran xda2unlock.exe at desktop got XP shutting down that xda2unlock.exe. at that time i put active sync USB on stop. couldnt do any thing.
while try once i saw serial rs232 on wallaby screen i dont know how to acivate it again and try abouve procedure.
is there any other way to unlock my mobile.?
I want to connect to gprs and browse net.
wallaby unlock
i was finnally able to unlock mine yesterday (02/25/07) but you need to change 2 things before being able to use the unlocker.exe program . first you wont be able to do it via the usb connection it just wont work due to the rom currently installed use the sd mem card method to flash the rom using a card reader and OSIMagetool.you need to change the rom to the ROM: 3.17.03 ENG (XDA special edition) you need to do this so you can flash the radio and the current rom wont allow you to do it and then change the radio to version to Radio: 6.24.00 (mine was 6.25.02 and its whats not allowing the unlock to work ) then the unlocker.exe will work . the instructions are on this url http://www.romkitchen.de/tools/manual2_unlock.htm and the software i used is on this url http://www.romkitchen.de/tools/form.php .The instructions here changed the boot loader but it wasnt needed to get my phone unlocked you can probably skip that step also . good luck
Please, link is not working
The link ftp://xda:[email protected]_1.2.exe.zip is not working anymore.
Could someone please, point me in any other direction I can look for?
Thank you very much.
Manuel J.
P.S. Still searching
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
LumpiStefan said:
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
Click to expand...
Click to collapse
Thank you so much.
Manuel lJ.
want to meet u in stuttgart
Dear lumphistephen i dont know your personel mail id so this message ,i am reaching stuttgart on 2 april will be there till 15th april for church confernce how can i contact u there?
My Host Mr.Gunter Janzens phone number 0711-4579360 or 0711-457790 or 0175 689 5555 (mobile).Also u r welcome for the meetings where friends from all over the world come there for christian fellowship.can u please
give personel mail id .mine is [email protected]

X01HT Unlock Error and Mtty

I was trying to sim unlock my friend softbank X01HT
so i was running the greatest pof unlocker v3
and it was successful (unlock cid and sim)
but after a reset the X01HT showing USIM window
and asked to input a code.
in the faq,pof suggest to update the rom to english one or to use the uk unlocker until it ask for unl files. so take the second suggestion and use the uk unlocker.
the usim are not showing anymore but my signal are not showing also.
only a ! icon in my signal bar
already tried to using the unlocker a couple times and the result it the same
and pof say maybe your device was pre april and it cannot be unlocked for a moment
and pof say to use mtty to check the bootloader radio version.
so help me answer this question please
1. why in mtty are not showing "usb>>" but only "cmd"
i tried to type "rtask a" but its say command error. i already disable the usb in active sync and connect to usb in mtty. tried also in another comp but still not showing the "usb>>" after i click enter twice.
2. is there any other method to check my x01ht was have the protection unlock or not ??
thx
the spec are here
X01HT HERM200
Black
IPL-1.01
SPL 1.40.Olipro (i upgraded it to 2.10.Olipro)
M 05,S 04,B 06, D. 1.33,
R 1.14.01.10,
G 32.50.7018.00H
Read the past forums about post April X01HT
Can you read some past forums about X01HT, post april so you can understand how to unlock it,so in your case, 1.14.01.10 radio is not possible yet to sim-unlock, but my friend here transfer the old hermes (X01HT signal IC) to the not unlockable one, it is a success after sim unlock it, the problem is where to get some hardware (Signal IC's) for X01HT.
Good Luck, try the hardware radio transfer then unlock.
HTC Herald Unlock
if you live in Bali - Indonesia you can bring it to me. but sorry its not free...
dvaiyo said:
if you live in Bali - Indonesia you can bring it to me. but sorry its not free...
Click to expand...
Click to collapse
i live in bali where you honey.... hehehe

dead htc herm200

hi
i think i brick my htc hermes 200
i was trying to fix "No GSM" but during the way it shut down
i follow thread on wiki - problem 5
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
when it came to unlock my device was in bootloader I run the unlocker but my device turn off and now stuck in bootloader only shows the 3 color screen but with no light and no letters like info herm200 IPL-1.01 or serial or usb when i connect usb cable.
my device was
herm200
IPL-1.01
herm200
SPL-1.40.olipro
now i cant connect i try almost every thing but doesnt work
any sugestion ?!
did any one had this problem?????????
can any one provide an sdcard flash rom ready for me just to copy in memory card?
Radio is dead, no gsm
I have the same issue. Phone part not working. I was able to install FARIA-R32-XDA2 ROM and everything else worked except the radio. I'm still trying other options but I think the radio hardware is fried. Need to replace the motherboard in that case but it's $90 from website. Seems like a lot of used 8525's are dying about this time. First the radio or the charging circuit, then the whole mobo goes.
In most, if not all cases, no-one has been able to fix the radio rom. Biggest Hermes killer out there.
No GSM Problem....
Flash Radio-rom via Sd Card.......

Categories

Resources