I was trying to sim unlock my friend softbank X01HT
so i was running the greatest pof unlocker v3
and it was successful (unlock cid and sim)
but after a reset the X01HT showing USIM window
and asked to input a code.
in the faq,pof suggest to update the rom to english one or to use the uk unlocker until it ask for unl files. so take the second suggestion and use the uk unlocker.
the usim are not showing anymore but my signal are not showing also.
only a ! icon in my signal bar
already tried to using the unlocker a couple times and the result it the same
and pof say maybe your device was pre april and it cannot be unlocked for a moment
and pof say to use mtty to check the bootloader radio version.
so help me answer this question please
1. why in mtty are not showing "usb>>" but only "cmd"
i tried to type "rtask a" but its say command error. i already disable the usb in active sync and connect to usb in mtty. tried also in another comp but still not showing the "usb>>" after i click enter twice.
2. is there any other method to check my x01ht was have the protection unlock or not ??
thx
the spec are here
X01HT HERM200
Black
IPL-1.01
SPL 1.40.Olipro (i upgraded it to 2.10.Olipro)
M 05,S 04,B 06, D. 1.33,
R 1.14.01.10,
G 32.50.7018.00H
Read the past forums about post April X01HT
Can you read some past forums about X01HT, post april so you can understand how to unlock it,so in your case, 1.14.01.10 radio is not possible yet to sim-unlock, but my friend here transfer the old hermes (X01HT signal IC) to the not unlockable one, it is a success after sim unlock it, the problem is where to get some hardware (Signal IC's) for X01HT.
Good Luck, try the hardware radio transfer then unlock.
HTC Herald Unlock
if you live in Bali - Indonesia you can bring it to me. but sorry its not free...
dvaiyo said:
if you live in Bali - Indonesia you can bring it to me. but sorry its not free...
Click to expand...
Click to collapse
i live in bali where you honey.... hehehe
Related
I've just received an XDA2 that is locked to the O2 network.
I need to use a UK Vodaphone PAYG Sim in the XDA.
I've run xda2unlock but it tells me that the phone is allready unlocked.
Except, when I use my Voda sim the XDA still wants me to input a code into the SIMlock box!
Any ideas as to what the problem could be?
what do you mean ?
when you softreset your device and it want a code to do anything but
call alarm and such ?
because thats not a simlock code thats just the sim code
You probably followed the xda2unlock link from the front page of www.xda-developers.com into the wiki pages. In the wiki there is still the old version 1.2 of the tool, which doesn't seem to work on Radio 1.10 or so. At least on my UK O2 XDA2 I had the same behaviour as you described.
The good news is: there is a new version that does indeed work (at least, for me it did). Please go to http://forum.xda-developers.com/viewtopic.php?t=6963 where you will find version 2.2 of the xda2unlock tool. This is a program that runs on the PDA itself. It does not require the hard reset or the bootloader mode.
Hope this helps ... Kai
PS: I have updated the 2 wiki pages, to include links to version 2.2, too.
Japanese ROM from DoCoMo hTc Z has been uploaded to XDA-Developers FTP and added to the Hermes wiki, you can find it under the Available Original Shipped ROM Versions.
Notes on this ROM:
ROM Version: 1.23.731.2 06/24/06
Radio Version: 1.06.00.10
Bootloader: 1.04
Language: JPN (Japanese)
CID: DOCOM801
As you can see this is nothing new, but I guess it will be useful for people with this CID to be able to downgrade to bootloader 1.04.
Enjoy
Hi pof,
Thanks for that. I tried this to flash my X01HT after unlocking it with imei-check but with no luck. RUU went successufully till the last screen and I hit the upgrade but it returned an error saying something like this RUU cannot be used for the device. Bootloader is now 1.04 and the device should be SuperCID with imei-check. The only thing I can think of is that I upgraded the radio to your 1.2. Would that screw SuperCID? I appreciate your advice in advance.
Thanks,
harryk
harryk1372: If you are in 1.04 bootloader just run the upgrade utility again without disconnecting the device or start the upgrade in bootloader mode to bypass CID checking.
If it is really SuperCID then you shouldn't have seen this error.
Hi pof,
Thanks very much for getting back to me so quickly.
I ran the upgrade in the bootloader mode. I thought that I don't have to run it twice if the device is already at the SuperCID state and didn't run the update twice. I'll try it again when the device is fully charged as the battery is now down to like 30%.
I'll post the result again when I am done. Thanks again for your prompt advice. You're the man and I really appreciate your efforts taking us thus far in cracking Hermes.
Regards,
harryk
Hi pof,
The device looks like it was not in the SuperCID state and RUU went fine with the second run with no error. However, the upgrade failed when it hit exactly 47% no matter how many times I tried it. Lucky that I did not brick my device but of course it seemed to lack some of the components and it did not even have the Connections setting to set up the Internet access. Also, AutoRun and cabs in the ExtRom didn't take any effect either although the cab files were there.
I decided to flash the TyTN ROM instead and that was successful. That is fine as I only use Japanese occasionally and I didn't really want the Japanese MUI so I will keep it as is. Perhaps I will tweak it a little to be able to use Japanese with loading the Chinese nls, Japanese font, Japanese IME and so forth just like I did with my Universal.
Thanks again.
harryk
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
s2k7 said:
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
Click to expand...
Click to collapse
fyi...
http://forum.xda-developers.com/showthread.php?t=283177&page=2&highlight=qtotter
I always downgrade my JASJAM using I-Mate shipped ROM
s2k7 said:
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
Click to expand...
Click to collapse
i use the docomo rom on my x01ht. it's ok. i have no problem with it at all.
a friend of mine uses a sim-unlocked x01ht (/w the original s/b rom) with sb_usim, but she does not get such a msg at all. do you use a s/b sim?? if yes, i suppsoe you did something wrong...
X01HT Unlocking Problem
I've got this X01HT a few days ago from S/B shop but when I tried unlocking it the result was no good using my cable. I read from other site that X01HT released from December 2006 cannot be unlocked. Please give me some clarifications on this and also, is FLASHING on lower rom version even in english version can resolve the problem...? Your response will so much appreciated.
Thanks in advance.
At the moment it's not possible to unlock X01HT devices wich where bought after 12/1/2006 and have bootloader version 1.09 and RadioROM version 1.14.0.10! Please be patient.
To the experts, I need some advice. I intend to get a X01HT, already unlocked and flashed with the dopod 838 pro firmware. However, I intend to flash back the Japanese shipped rom :
RUU_HER_DoCoMo_1.23.731.2_1.06.00.10_JPN_SHIP.zip
What are the requirements esp where :
Bootloader (SPL)
Latest Radio Bootloader (HTC_BOOT)
Or since its unlocked, do I just go to the bootloader mode and flash direct? Any side effects if I do so, since its changing from an english rom of another clone (Dopod 838 pro, WM6)?
I am not even sure if the RUU_HER_DoCoMo_1.23.731.2_1.06.00.10_JPN_SHIP.zip rom is WM5/6. Please advice, thanks..
I bought the m600 two weeks ago and read about the unlocking in the Wiki. I folowed the steps but it seems that after executing lokiwizMSL.bat and pressing enter to start it lokiwiz can't find my mobile phone, it says: cant find path. While it was connected with activesync. after this it says its unlocked, but i cant find the code anywhere
Does anybody knows what I could have done wrong?
I really need to Sim unlock the phone because it can't read my other non-orange Simcard
thanks in advance!
hi again.
I tried to unlock the Prophet again, for some times. I Copied the cab's from the Utils folder in the Lokiwiz03a.zip file to my Prophet and executed them.
(The two files : "Cert_SPCS.cab" and "EnableRapi.cab")
But I keep receiving the message ".....kan opgegeven pad niet vinden" (cant find path)
Please help me
What is the path that the Lokmiwiz is searching for, and why doesnt it sees that I'm connected via ActiveSync, which I was?
thanks in advance!
That's the problem about G4 devices! It seems that HTC has changed the path for unlocking so we have to wait for a new unlocking solution for our G4 devices!
I have to wait too!
try with aWizard
Unlocking my SPV M600 from Orange
Hi. I'm from Argentina and travel a lot because I guide motorcycle tours in South America. I use different cell phones all over south america.
I mainly use my SP in Argentina (CTI Movil)
My girlfriend bought me (yes you can say I'm a lucky guy ) this beautiful M600 in France with Mobicart. I tried to unlocked it usind the lokiwizMSL 0.3 but did not work. The message was that the path was not found.
I installed the cabs in the PDA and this erased the picture in the desktop.
After that I ran again de lokiwiz, and had the same answer. The path is not found and did not deliver the precious code. The PDA was connected at all times. It also says that ECHO is disconnected. I have no idea what ECHO is (sorry )
Do we still have to wait for a new version of the loki software? Is there any other way? Can you help this southern beginner?????
I can say that my SPV is a G4, bought last Dec.
Hey, this is a great place and I kinda like the community.
Saludos!!
SPV M600-G4 Desimlock Ok
Hi guys,
I've just unlocked my M600 ORANGE.
I used lokiwizMSL 0.3 on my desktop PC (ACTIVESYNC V 4.5)... That does not worked... I used lokiwizMSL 0.3 in my notebook (ACTIVESYNC V4.2) and It woked very well : I've got the precious number !
Know I put my SFR sim into it... That's OK
So... If your PC says "path is not found" try to unlock your M600 into an other PC !!!
animelover said:
That's the problem about G4 devices! It seems that HTC has changed the path for unlocking so we have to wait for a new unlocking solution for our G4 devices!
I have to wait too!
Click to expand...
Click to collapse
G4 = "Disk On Chip" is a other Version.
G4 unlock with Lokiwiz: Activesync 4.2
I have Prophet G4 and unlocked with the Lokiwiz software (I don't know which version anymore, I unlocked ± 1 year ago).
I used Activesync 4.2, definitely not 4.5
Good chance that M$ added (bij accident of course) a minor surprise in their latest Activesync version.
4.2 can be downloaded on several places, f.i. here
http://www.techspot.com/downloads/2480-microsoft-activesync.html
Good luck.
I've just used Lokiwiz03a to unlock an m600 g4 with no problem whatsover over activesync 4.5
Unlock S200. All Ok !!!!!
Hello
If somebody need to unlock a Qtek S200 G4 use the next link:
http://wiki.xda-developers.com/index.php?pagename=Prophet_Unlock_Sim
It's easy and ok!!!
Tanks to wrigth this guide !!!
do you CID unlock or SIM :->
can sombody post me a link please how to CID unlock a G4 Model?cause wizloki is just for sim or?thx
More problems with my SPV M600
Someone has given me a PDA (SPV M600 or Qtek S200) but he tried to upgrade it to wm6. Unfortunately he doesn't know everything about it because this PDA is 4G and he tried the sequence as the PDA was 3G.
The thing is, in the middle of the process the machine starts to run but it is blocked and the screen shows:
Orange:
IPL 2.21.0001
SPL 2.21.0001
GSM 0.2.19.21
OS 1.0.13.21
After do a hard reset the message is always the same. I can't do anything!!
What could I do?
Thanks
lokiwiz03a worked for me Now I can use any SIM...
If anyone is interested, I used activesync 4.1, the disk came with my SPV.
I tried to unlock Hermes Orange SPV M3100 withe the latest unlocker v3a but couldn't unlock...After run auto unlock v3a, and run hermes unlock at the end, it says unlock successfuly but the phone still asks to enter unlocking code..i've been reading the hernes unlock threads but could find the solution to unlock it..this hermes has ipl 1.01 and spl 1.40 0ipro...anyone knows the way to unlock please help..thanks
sorry..problem solved, phone's unlocked...don't know what happened first but after hard reset phone, insert original sim and repeat procedure, phone is unlocked after that.
hi, i have the same problem. When i m flashing with Auto_unlock_3a_pof , i must insert original sim (orange) or no?
thanks
hi, I had the same problem. the unlocker went thru the procedure as successful, but was still locked to orange and asked for the code.
I had ran it without any sim.
after I did a hard reset and put in an orange sim, then ran it. it was ok.
unlocked. thanks.
you gotta give LOTS of details about your problem. there are literally hundreds of possibilities if you give us no details about what you did, what went wrong, during what stage... have u set up correctly, did you flash hardspl, was your battery full, did you read instructions well or just skim and jump ahead?
i hav same problem...."--------------------------------------------------------------------------------
I tried to unlock Hermes Orange SPV M3100 withe the latest unlocker v3a but couldn't unlock...After run auto unlock v3a, and run hermes unlock at the end, it says unlock successfuly but the phone still asks to enter unlocking code..i've been reading the hernes unlock threads but could find the solution to unlock it..this hermes has ipl 1.01 and spl 1.40 0ipro...anyone knows the way to unlock please help..thanks""" plz help me
I must be thick as I have read more posts on this than I have had hot dinners and tried various utilities all to no avail although thankfully my Wizard still seems to work.
My O2 XDA-Mini s is about 2 years old and of course locked to O2 although the device come up as SIM Unlocked but CID Locked.
IPL - 2.21.0001
SPL - 2.21.0001
I am now on the Three network and would just like to get back to using the phone I love rather than the freebie I have now, so I am assuming I need to get CID Unlocked?
Having bothered to get to that stage I would want to scrap the O2 software and upgrade to a better ROM.
Sorry for being so stupid on this, I am hoping someone in the know can take the time to reply.
Thanks in advance
If it's sim unlocked you don't need to CID unlock to enable other sims.
If your new sim is rejected, then the device is still sim locked.
CID is only used for flashing, so if you want to upgrade to the better WM6 roms now available, you'd have to unlock it permanently (hard SPL) or use the Soft SPL.
Good luck,
EquinoXe
the-equinoxe said:
If it's sim unlocked you don't need to CID unlock to enable other sims.
If your new sim is rejected, then the device is still sim locked.
EquinoXe
Click to expand...
Click to collapse
Thanks for taking time to reply EquinoXe, you have confirmed what I had already thought.
The device reports "Invalid or missing SIM card" with the Three SIM card and WST v4.2.2 reports "Your phone is already SIM unlocked" ??
I do wan't to upgrade the ROM but more importantly I want to get the thing working with the Three SIM card, then I can worry about the ROM.
Any other suggestions will be gladly received.
Thanks in Advance
Download and use the LOLKWIZ03b program from these forums, follow the insturctions EXACTLY, and it will generate you a SIM unlock code.....enjoy!
ashasaur said:
Download and use the LOLKWIZ03b program from these forums, follow the insturctions EXACTLY, and it will generate you a SIM unlock code.....enjoy!
Click to expand...
Click to collapse
I have done this twice just recently but my G4 is not asking me to enter any unlock code. I read other threads where people had similar problems so tried a few times, device still comes up "Invalid or missing SIM card"
I ran EnableRapi from the device before running the batch file so I'm not sure what is going on or if it is something quirky about the G4 device??
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Jackson>cd\
C:\>lokiwizmsl
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: ¨~äe├ÇÔ►-┴«p¦╚.;
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
Strange, according to lokiwiz (and WST) you are sim- unlocked.
But clearly your three sim card won't be accepted.
I do remember that HTC had been messing with the bootloaders, had to downgrade one in order to unlock it too..
Could you Flash a 2.19.0001 (or earlier G4) IPL/SPL ROM and try again?
You can use dharvey4651's thread as a guide to flash the IPL/SPL.
Just ignore the carrier ROMs, and only update (downgrade) the IPL/SPL with one attached to djharvey's thread (preferably the orange, because that one worked for me).
Flashing bootloaders can damage your device beyond repair, please use this method only if you are shure about the process, and know what you are doing. I am not responseble or liable for any damages.
Flash the IPL/SPL (takes a minute), then try again to unlock the phone.
Note: WM6.x needs IPL/SPL 2.19.xxxxx at least (works great with a 2.19), so if you have downgraded to a lower number, you'd have to upgrade again in order to run WM6.x .
Good luck,
EquinoXe
Same Problem
I have the same problem as the previous post. I downgraded from WM6.1 to a WM5.1 ROM and then ran lokiwiz - success!
I have now gone back to the original WM6.1 ROM and again I am locked out from my o2 SIM.
I am using: WM6.1 ROM Prophet My Green Edition http://forum.xda-developers.com/showthread.php?p=2116170
Any suggestions?
IPL 2.10.001
SPL 2.G4.4PDA
GSM 02.47.21
OS 5.2.19.209
the-equinoxe said:
Could you Flash a 2.19.0001 (or earlier G4) IPL/SPL ROM and try again?
You can use dharvey4651's thread as a guide to flash the IPL/SPL.
EquinoXe
Click to expand...
Click to collapse
Thanks EquinoXe, I am going to try a T-Mobile, Vodaphone and Orange SIM later to see what results then maybe tomorrow try your last suggestion.
Thanks and I will post any results, hopefully not a flashy paperweight (~:
------------------------------
I have now tried T-Mobile, Vodaphone and Orange SIM cards in the Wizard and all work OK so unlocking was never the problem, obviously O2 is OK also as this was it's original branding.
So the problem is only with the Three SIM, I have an old T610 and T630 which I just put the Three SIM into with the same results.
Need to do a bit more reading on this but I thought this sort of restrictive trading practice went out with the monopolies issues, as it seems at the end of my contract it's not just a matter of me buying a phone of my choice, if I want a new handset I have to go with Three, who interestingly don't do XDA style phones, or change contracts.
More if it happens.
I'm guessing that the reason the 3 sim card won't work is because the Mini S isn't a 3G capable device - 3 is the only network in the UK that's 3G exclusive, hense why other (T-mobile, Vodafone, O2 and Orange) sims will work and the 3 sim card won't.
Hope this helps.