I bought the m600 two weeks ago and read about the unlocking in the Wiki. I folowed the steps but it seems that after executing lokiwizMSL.bat and pressing enter to start it lokiwiz can't find my mobile phone, it says: cant find path. While it was connected with activesync. after this it says its unlocked, but i cant find the code anywhere
Does anybody knows what I could have done wrong?
I really need to Sim unlock the phone because it can't read my other non-orange Simcard
thanks in advance!
hi again.
I tried to unlock the Prophet again, for some times. I Copied the cab's from the Utils folder in the Lokiwiz03a.zip file to my Prophet and executed them.
(The two files : "Cert_SPCS.cab" and "EnableRapi.cab")
But I keep receiving the message ".....kan opgegeven pad niet vinden" (cant find path)
Please help me
What is the path that the Lokmiwiz is searching for, and why doesnt it sees that I'm connected via ActiveSync, which I was?
thanks in advance!
That's the problem about G4 devices! It seems that HTC has changed the path for unlocking so we have to wait for a new unlocking solution for our G4 devices!
I have to wait too!
try with aWizard
Unlocking my SPV M600 from Orange
Hi. I'm from Argentina and travel a lot because I guide motorcycle tours in South America. I use different cell phones all over south america.
I mainly use my SP in Argentina (CTI Movil)
My girlfriend bought me (yes you can say I'm a lucky guy ) this beautiful M600 in France with Mobicart. I tried to unlocked it usind the lokiwizMSL 0.3 but did not work. The message was that the path was not found.
I installed the cabs in the PDA and this erased the picture in the desktop.
After that I ran again de lokiwiz, and had the same answer. The path is not found and did not deliver the precious code. The PDA was connected at all times. It also says that ECHO is disconnected. I have no idea what ECHO is (sorry )
Do we still have to wait for a new version of the loki software? Is there any other way? Can you help this southern beginner?????
I can say that my SPV is a G4, bought last Dec.
Hey, this is a great place and I kinda like the community.
Saludos!!
SPV M600-G4 Desimlock Ok
Hi guys,
I've just unlocked my M600 ORANGE.
I used lokiwizMSL 0.3 on my desktop PC (ACTIVESYNC V 4.5)... That does not worked... I used lokiwizMSL 0.3 in my notebook (ACTIVESYNC V4.2) and It woked very well : I've got the precious number !
Know I put my SFR sim into it... That's OK
So... If your PC says "path is not found" try to unlock your M600 into an other PC !!!
animelover said:
That's the problem about G4 devices! It seems that HTC has changed the path for unlocking so we have to wait for a new unlocking solution for our G4 devices!
I have to wait too!
Click to expand...
Click to collapse
G4 = "Disk On Chip" is a other Version.
G4 unlock with Lokiwiz: Activesync 4.2
I have Prophet G4 and unlocked with the Lokiwiz software (I don't know which version anymore, I unlocked ± 1 year ago).
I used Activesync 4.2, definitely not 4.5
Good chance that M$ added (bij accident of course) a minor surprise in their latest Activesync version.
4.2 can be downloaded on several places, f.i. here
http://www.techspot.com/downloads/2480-microsoft-activesync.html
Good luck.
I've just used Lokiwiz03a to unlock an m600 g4 with no problem whatsover over activesync 4.5
Unlock S200. All Ok !!!!!
Hello
If somebody need to unlock a Qtek S200 G4 use the next link:
http://wiki.xda-developers.com/index.php?pagename=Prophet_Unlock_Sim
It's easy and ok!!!
Tanks to wrigth this guide !!!
do you CID unlock or SIM :->
can sombody post me a link please how to CID unlock a G4 Model?cause wizloki is just for sim or?thx
More problems with my SPV M600
Someone has given me a PDA (SPV M600 or Qtek S200) but he tried to upgrade it to wm6. Unfortunately he doesn't know everything about it because this PDA is 4G and he tried the sequence as the PDA was 3G.
The thing is, in the middle of the process the machine starts to run but it is blocked and the screen shows:
Orange:
IPL 2.21.0001
SPL 2.21.0001
GSM 0.2.19.21
OS 1.0.13.21
After do a hard reset the message is always the same. I can't do anything!!
What could I do?
Thanks
lokiwiz03a worked for me Now I can use any SIM...
If anyone is interested, I used activesync 4.1, the disk came with my SPV.
Related
does anyone know how to unlock this puppy?
it is an spv c550 also known as the hurricane
thx in advance
All the info you need is here: http://www.modaco.com/INFO_Decert_SIM_Unlock_C550-t222786.html
Works like a charm on mine.
well the problem is i cannot run apps from the phone bc i dont have an orange simcard (and it is locked by orange)
any ideas?
Talk to Orange, pay them money, they will unlock for you.
uh huh thats why we are all here right
id rather donate it to xda developer
tried an orange sim card but it appears to stay locked!! :shock: does the orange sim card have to be from the same country as the phone?
ok i swiftly turned on the flight mode now i can browse
yep that made all the difference phone is unlocked now
editing
hi i just got one on upgrade what do you changr the values to ???????
what values?
I used info at http://www.modaco.com/INFO_Decert_SIM_Unlock_C550-t222786.html
used the registry editor to change values to
HKLM\Security\Policies\Policies\00001001 = 1 (RAPI)
HKLM\Security\Policies\Policies\00001005 = 40 (Cert)
which I assume unlocked security ( as culd not do online)
then used file from http://www.spv-developers.com/forum/showthread.php?t=236
yeah and didnt it work??
Having trouble...
Ok , edited the registry settings and that worked out ok, downloaded the SPV Developers Services Kit , extracted all the files to my desktop. made sure active synch connection is alive, Orange Simcard inserted. I run the simlock function , request pops up on the phone , agree and then i get
Unknown error -2147467259 in read operation in the SPV Developers Services
any suggestions ? I tried hard resetting my phone and tried again , but same result..dunno really
edit : doh , 5 more minutes and i wouldnt have had to post .. The Cert.Cab included in the SPV Dev. Serv. Kit has to be executed from the phone b4 you can run the unlock tool. NFO file with these instructions would be useful but heh beggars cant be choosers....Working !!!!!!!
how did you turn on the flight mode without card?
you have to press the on button really quickly, as the phone is still booting
johndope said:
ok i swiftly turned on the flight mode now i can browse
Click to expand...
Click to collapse
ok brother ihave also the same problem,i am newbie and plzz tel me how you have make your phone on into flght mode
HHELP
My C550 Is Not Working Properly And Also Not Connecting To D Active Sync. Kindly Help Me 2 Format D Set Via P.c. I Wil B Highly Thankful 2 U. Iam 4rm India And There Is No Outlet Of Orange. Kindly Help Me.
Jtag Points SPV C550
HY,
Who knows where is JTAG Points for SPV C550 ?
Bye.
unlock instruction for SPV C550
http://www.unlocking4u.com/spv-c550/rs6wp9/ will give you the unlock instructions for your nokia mobile.
SPV C550 Unlocking Instructions:
Warning : Do not enter any wrong unlock codes on your SPV C550 mobile phones. If you enter over a certain amount of wrong unlock codes on your SPV C550 mobile phone, your phone may get hard locked and sometimes become unusable.
1 - Switch ON your SPV C550 with a NOT ACCEPTED* SIM Card.
2 - Enter the Unlock Code.
*NOT ACCEPTED : We mean, to use a sim card from a network other than the network your SPV C550 is locked to.
Each SPV C550 mobile phone has an unique unlock code. You can buy the unique unlock code for your SPV C550 mobile phone using the form above.
Thank you... I got my codes very quickly ...
hello I´ve recover my m3100 from a dead brick (after used of universal sim lock) to full working phone
Her is my way
1. I´ve first try flashing a windows mobil 5 rom from my qtek 2020 on the m3100 for 2-3 times
2. then I´ve flas it with the new rom from Cingular ther are using bootloader 1,06..... and IT COME BACK ALIVE....
and if you have a HTC HERMES Then you just find a rom with you phons cid her
"http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades"
BUT REMEMBER IF YOU HAVE A ORANGE M3100 YOU CAN´T FLASH OTHER ROMS
BECAUST YOU HAVE TO USED A ORANGE CID ROM AND IS´T NOT OUT YET..
Good to hear That your device Is up now Congrat's , Wht if it's possible with human being
Why u've instal qtek 2020 on this hermes ?
I´ve just wanted to try somthing after 30 days looking at a £450 brick
@kimbay:
I have some questions for you, in order to understand how you fixed it and provide a "solution" for the others:
1) About the Qtek2020 flashing:
- Did the Himalaya flashing process did anything on the hermes?
- Where did the Himalaya flashing process stopped?
- What did you see on the Hermes screen?
- What error did you see on the Himalaya upgrade utility?
- Which rom did you exactly use? (post the ftp link of it please)
2) About your M3100
- Which CID does your hermes have? If it's a M3100 from UK, i guess it is ORANG001, right?
- Which ROM, radio rom and bootloader version did you have on your device when you fixed the problem?
If there's anything else I am missing and you think can be useful, please post it too...
Yes, please fill us in because I'm sitting on a brick'd TyTN
congrads on bringing it back to life
Moreover - does this imply any hope for those of us with Orange SPV M3100s that are stuck on the latest Cingular ROM with no Orange updater?
Hi POF
I do not know what the flash didt to my hermes but it seems on usb monitor like it slowly after trying to flash the old 2020 rom 2-3 times went further and further in to the program. the screen turn silver and read USB like on the 2020. Every time it just stop (frozz).
Then I just try the new cirguler rom.
yes my m3100 is a orange001 cid -bootloader 1,04
I don´t know what the original rom was I think it was on off the first orange releast I got it 20/7-2006
(Do you whant me to upload the zip file containing my windows 5 mobile ?)
P.S. now my problem is that I can´t unlock the phone because imei-unlock do not suport bootload 1,06
regards
kim
Izzard-UK said:
Moreover - does this imply any hope for those of us with Orange SPV M3100s that are stuck on the latest Cingular ROM with no Orange updater?
not for the moment I´am also stuck on cingular rom
Click to expand...
Click to collapse
kimbay said:
I do not know what the flash didt to my hermes but it seems on usb monitor like it slowly after trying to flash the old 2020 rom 2-3 times went further and further in to the program. the screen turn silver and read USB like on the 2020. Every time it just stop (frozz).
Click to expand...
Click to collapse
OK, but which rom did you exactly use? (post the ftp link of it please)
ftp://xda:[email protected]/Himalaya/
kimbay said:
I don´t know what the original rom was I think it was on off the first orange releast I got it 20/7-2006
(Do you whant me to upload the zip file containing my windows 5 mobile ?)
Click to expand...
Click to collapse
It's ok, it was original rom from M3100... no problem, no need to upload anything.
If you have dead Hermes try to flash with Hermes_1.18.416.1_1.18.416.101_1.14.00.10_WWE_Ship.exe For me - it`s work.Regards
SPV M3100 Freez
Hello
I have A SPV M3100 anyoane write same ... for unlock and new freez in "Windows mobile"
when i put in 3 color and i see:
"Herm100
IPL-1.01
Herm100
SPL-1.04"
And when is in 3 color and connect to PC ActivSync get error cannot recognize this device
Hi
I was given an Orange SPV M600 running WM5.0 I foolishly thought I would be able to unlock it to work with my T-Mobile sim (the only network I can get coverage at home) I ran an unlock tool from en.pdamobiz.com
http://files.pdamobiz.com/c/PDAMobiz.com_ProphetAKU2_unlockCID.rar
I managed to get to through to the completion of the Downgrade.bat process. I was then asked to sofdt boot the M600 but it now cannot be found by Activesync. I was unable to successfully run Unlockcid.bat and now it just boots to either the 'Orange' screen (displaying IPL 2.10.0001, SPL 2.10.0001, GSM 02.07.20 & OS 1.0.13.21 - the new OS I believe) or the 3 colour screen (displaying IPL 2.10.0001, SPL 2.10.0001) if I hold down the camera button.
Windows 5.0 has gone or is unreachable but I am assuming it can't be completely dead as I get a noise when connecting/disconnecting the USB lead....
Is this false hope? Have i killed it after 2 days of ownership??? Should I have attempted this process with very little tech knowledge - me thinks YES!
I would be eternally greatful to anyone who can help me out of this black hole..... I just need pointing in the direection of what stage the M600 is at and how to get it running on my T-Mobile sim.....
Thanks in advance
hi there, try going into the bootloader screen, when you connect the usb cable it should show on the bottom off your screen. then try uploading the orange rom you can find on the wiki page. if this works then try using the loki unlocker which you should also be able to find on the wiki page. i used the loki tool and it unlocked first time. hope this helps. let me know how you go.
The GOOD news is No you haven't killed it. It seems you have wiped the operating system from it. I would sugest searching for RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe down load it and then get your phone to the multi colour screen before running the download. This should then update your phone
when I tried to unlock my phone, I couldn't get it to unloack at all till I put a orange pay as you go sim in the phone and registered the sim with orange then it unlocked first time.
Killed prophet reborn!!
Fingers666 said:
hi there, try going into the bootloader screen, when you connect the usb cable it should show on the bottom off your screen. then try uploading the orange rom you can find on the wiki page. if this works then try using the loki unlocker which you should also be able to find on the wiki page. i used the loki tool and it unlocked first time. hope this helps. let me know how you go.
Click to expand...
Click to collapse
Spot on. Thanks so much for the advice. Fingers666 & jazpa !! I'm back on track. M6000 is now communicating again. WM5 is resident. Just need to unlock the sim and I'm away. [email protected] tried loki 3.0 amd 3.0a with both Activesync 4.2 and 4.5 respectively without any luck so I've just spent £5 a http://www.unlocking.org.uk/ as they say they can unlock a G4 ver. We shall see!! Great help though and THANKS again to both of you
Please Help Meee!!
Hello i was wondering if anybody could help me.
I want to unlock my orange SPV M600 for free.
If there are any safe and free websites that anybody knows of could u please tell me.
Thank Youu!!
James Thomas
Download Lokiwz, it is quite easy to locate. Inside the folder you will find 1 or 2 cab files, copy these to your storage card and run them on your M600. Now run Lokiwiz from your PC, after around 12 minutes, it will display your sim unlock code. Switch off your M600 and insert the sim you want to use, at the prompt, enter your code lokiwiz generated. For around 2 minutes the phone will seem to have no signal, then it will connect.
Worked first time for me, my M600 was locked to Orange, now it works great with O2.
wonderful works great with G4
thanks
mike
I was trying to sim unlock my friend softbank X01HT
so i was running the greatest pof unlocker v3
and it was successful (unlock cid and sim)
but after a reset the X01HT showing USIM window
and asked to input a code.
in the faq,pof suggest to update the rom to english one or to use the uk unlocker until it ask for unl files. so take the second suggestion and use the uk unlocker.
the usim are not showing anymore but my signal are not showing also.
only a ! icon in my signal bar
already tried to using the unlocker a couple times and the result it the same
and pof say maybe your device was pre april and it cannot be unlocked for a moment
and pof say to use mtty to check the bootloader radio version.
so help me answer this question please
1. why in mtty are not showing "usb>>" but only "cmd"
i tried to type "rtask a" but its say command error. i already disable the usb in active sync and connect to usb in mtty. tried also in another comp but still not showing the "usb>>" after i click enter twice.
2. is there any other method to check my x01ht was have the protection unlock or not ??
thx
the spec are here
X01HT HERM200
Black
IPL-1.01
SPL 1.40.Olipro (i upgraded it to 2.10.Olipro)
M 05,S 04,B 06, D. 1.33,
R 1.14.01.10,
G 32.50.7018.00H
Read the past forums about post April X01HT
Can you read some past forums about X01HT, post april so you can understand how to unlock it,so in your case, 1.14.01.10 radio is not possible yet to sim-unlock, but my friend here transfer the old hermes (X01HT signal IC) to the not unlockable one, it is a success after sim unlock it, the problem is where to get some hardware (Signal IC's) for X01HT.
Good Luck, try the hardware radio transfer then unlock.
HTC Herald Unlock
if you live in Bali - Indonesia you can bring it to me. but sorry its not free...
dvaiyo said:
if you live in Bali - Indonesia you can bring it to me. but sorry its not free...
Click to expand...
Click to collapse
i live in bali where you honey.... hehehe
I must be thick as I have read more posts on this than I have had hot dinners and tried various utilities all to no avail although thankfully my Wizard still seems to work.
My O2 XDA-Mini s is about 2 years old and of course locked to O2 although the device come up as SIM Unlocked but CID Locked.
IPL - 2.21.0001
SPL - 2.21.0001
I am now on the Three network and would just like to get back to using the phone I love rather than the freebie I have now, so I am assuming I need to get CID Unlocked?
Having bothered to get to that stage I would want to scrap the O2 software and upgrade to a better ROM.
Sorry for being so stupid on this, I am hoping someone in the know can take the time to reply.
Thanks in advance
If it's sim unlocked you don't need to CID unlock to enable other sims.
If your new sim is rejected, then the device is still sim locked.
CID is only used for flashing, so if you want to upgrade to the better WM6 roms now available, you'd have to unlock it permanently (hard SPL) or use the Soft SPL.
Good luck,
EquinoXe
the-equinoxe said:
If it's sim unlocked you don't need to CID unlock to enable other sims.
If your new sim is rejected, then the device is still sim locked.
EquinoXe
Click to expand...
Click to collapse
Thanks for taking time to reply EquinoXe, you have confirmed what I had already thought.
The device reports "Invalid or missing SIM card" with the Three SIM card and WST v4.2.2 reports "Your phone is already SIM unlocked" ??
I do wan't to upgrade the ROM but more importantly I want to get the thing working with the Three SIM card, then I can worry about the ROM.
Any other suggestions will be gladly received.
Thanks in Advance
Download and use the LOLKWIZ03b program from these forums, follow the insturctions EXACTLY, and it will generate you a SIM unlock code.....enjoy!
ashasaur said:
Download and use the LOLKWIZ03b program from these forums, follow the insturctions EXACTLY, and it will generate you a SIM unlock code.....enjoy!
Click to expand...
Click to collapse
I have done this twice just recently but my G4 is not asking me to enter any unlock code. I read other threads where people had similar problems so tried a few times, device still comes up "Invalid or missing SIM card"
I ran EnableRapi from the device before running the batch file so I'm not sure what is going on or if it is something quirky about the G4 device??
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Jackson>cd\
C:\>lokiwizmsl
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: ¨~äe├ÇÔ►-┴«p¦╚.;
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
Strange, according to lokiwiz (and WST) you are sim- unlocked.
But clearly your three sim card won't be accepted.
I do remember that HTC had been messing with the bootloaders, had to downgrade one in order to unlock it too..
Could you Flash a 2.19.0001 (or earlier G4) IPL/SPL ROM and try again?
You can use dharvey4651's thread as a guide to flash the IPL/SPL.
Just ignore the carrier ROMs, and only update (downgrade) the IPL/SPL with one attached to djharvey's thread (preferably the orange, because that one worked for me).
Flashing bootloaders can damage your device beyond repair, please use this method only if you are shure about the process, and know what you are doing. I am not responseble or liable for any damages.
Flash the IPL/SPL (takes a minute), then try again to unlock the phone.
Note: WM6.x needs IPL/SPL 2.19.xxxxx at least (works great with a 2.19), so if you have downgraded to a lower number, you'd have to upgrade again in order to run WM6.x .
Good luck,
EquinoXe
Same Problem
I have the same problem as the previous post. I downgraded from WM6.1 to a WM5.1 ROM and then ran lokiwiz - success!
I have now gone back to the original WM6.1 ROM and again I am locked out from my o2 SIM.
I am using: WM6.1 ROM Prophet My Green Edition http://forum.xda-developers.com/showthread.php?p=2116170
Any suggestions?
IPL 2.10.001
SPL 2.G4.4PDA
GSM 02.47.21
OS 5.2.19.209
the-equinoxe said:
Could you Flash a 2.19.0001 (or earlier G4) IPL/SPL ROM and try again?
You can use dharvey4651's thread as a guide to flash the IPL/SPL.
EquinoXe
Click to expand...
Click to collapse
Thanks EquinoXe, I am going to try a T-Mobile, Vodaphone and Orange SIM later to see what results then maybe tomorrow try your last suggestion.
Thanks and I will post any results, hopefully not a flashy paperweight (~:
------------------------------
I have now tried T-Mobile, Vodaphone and Orange SIM cards in the Wizard and all work OK so unlocking was never the problem, obviously O2 is OK also as this was it's original branding.
So the problem is only with the Three SIM, I have an old T610 and T630 which I just put the Three SIM into with the same results.
Need to do a bit more reading on this but I thought this sort of restrictive trading practice went out with the monopolies issues, as it seems at the end of my contract it's not just a matter of me buying a phone of my choice, if I want a new handset I have to go with Three, who interestingly don't do XDA style phones, or change contracts.
More if it happens.
I'm guessing that the reason the 3 sim card won't work is because the Mini S isn't a 3G capable device - 3 is the only network in the UK that's 3G exclusive, hense why other (T-mobile, Vodafone, O2 and Orange) sims will work and the 3 sim card won't.
Hope this helps.