Hi, Doe's any one us tt5 on compact flash Card in the xda11 and got it working ?? my sd card slot is in use for the gps arial and the only spare slot is cf, I've just bought original tt on cd and the damn thing wont go onto the cf and work , anybody got any idea's ? I've e-mailed tomtom but i cant wait till thr end of time for them to reply . Thank's inadvance steve
i think i read somewhere it can't be used on cf card anymore only on sd ..but don't take my word fot it
Cheer's andy . steve
Related
Hi can anyone help?
I bought a XDA last year on ebay from XDA-Developers, with tom tom software, all was working fine until i tried to update the speed camera database last week. I downloaded the new poi's and then activated Tom Tom on XDA. The tom tom now states that there are no maps?
I have bought a disk with tom tom 5 software on and tried to reinstal on to XDA but it is still not working. The Tom Tom was originally stored on memory card. Can you buy the memory cards and will this solve problem. Really need this to work as travel loads and loads at moment. Thanks for reading Craftus..........
Can u explain a bit more in detail that what have u installed & where (which folders) have u installed.
Sidd
[email protected]
Hi,
I have reinstalled tom tom five of disk, but the tom tom is not activating, i think i may have caused more damage, as it kept stating that there was not enough memory on storage card, i deleated the duplicate copies to free up memory but still not working, tom tom is on PDA but not activating. Thanks for your reply
Craftus
First of all ur SD card must be BIGGER than 128mb, bcs TomTom5 takes approx 140mb
No u cannot reinstalled TomTom on a previous installation on ur PocketPC, if u have done so then, uninstall TomTom from PPC (all the files starting with "TomTom" name)(should be 4-5 files), takeout ur SD card and format it on a normal mode (not Quick Format), but u have to connect ur SD card to the PC directly (not via PPC cradle), u must have to have a card reader to do that.
Jessops Link:
http://www.jessops.com/search/viewp...N=4b9e83-6934583d-a469-4819-8d9c-6f7af79602d9
Ebay link:
http://cgi.ebay.co.uk/USB-CARD-READ...ryZ48546QQrdZ1QQcmdZViewItem#ebayphotohosting
Once u finish formatting the SD card, put it back to PocketPC, sync on cradle with PC and now install TomTom again.
:idea: GoodLuck :idea:
Sidd
Thanks, i'll give it a try
Craftus.
hi ol
i need ur help
i have imate jamin g4
i upgraded its rom from original wm5 to wm6 fantastic b4
i had these problems
1- the memory storeage card doesnt work the folders appears empty when i remove it and put it in again it works but not for long
2- the bluetooth and wifi dont work when i press on there icons in connection manger i have to try may be 10 times to make it work
where is the problem and how to solve it???
help me please
drmeemo said:
hi ol
i need ur help
i have imate jamin g4
i upgraded its rom from original wm5 to wm6 fantastic b4
i had these problems
1- the memory storeage card doesnt work the folders appears empty when i remove it and put it in again it works but not for long
2- the bluetooth and wifi dont work when i press on there icons in connection manger i have to try may be 10 times to make it work
where is the problem and how to solve it???
help me please
Click to expand...
Click to collapse
I have the same problems with WIFI and if I take out SD card I have no problem so it's the sd card thats not compadible with your prophet
hello
i tried another sd card and the same problem appeared
my sd card works on my pc
drmeemo said:
hello
i tried another sd card and the same problem appeared
my sd card works on my pc
Click to expand...
Click to collapse
My one works too one pc only problem is wifi sometimes
whats the size of the sd? and is it SDHC <--- is not compadible with prophet yet
my sd size is 1 giga
it was working on wm5
but when i upgraded to wm6 it doesnt work any more
i tried another sd 512 miga the same problem appeared
drmeemo said:
my sd size is 1 giga
it was working on wm5
but when i upgraded to wm6 it doesnt work any more
i tried another sd 512 miga the same problem appeared
Click to expand...
Click to collapse
then it must be the rom's sd driver thats causing the problem it might help to flash an other rom
sd card .......
it's like my problem with tnt4 , gullum 5
as i told u gullum ,do u remmeber ?
all roms has the same problem except these roms
1- padv 06
2- k0ster
3- TrueNeytral_1.4
plz gullum take a look to these roms and find the solution before u release v6
and drmeemo try one of these roms that i point to it above
i'm a tester of v6, i've done after reading this tread a test with my 4 SD card
128mb (old one)
512mb
1gb
and 2gb (microsd with adapter)
all of them works without problem...
thanx all for these informations
ill try these roms and let u know
i have the same problem with lasted coffie rom there are any solution?
drmeemo said:
hi ol
i need ur help
i have imate jamin g4
i upgraded its rom from original wm5 to wm6 fantastic b4
i had these problems
1- the memory storeage card doesnt work the folders appears empty when i remove it and put it in again it works but not for long
2- the bluetooth and wifi dont work when i press on there icons in connection manger i have to try may be 10 times to make it work
where is the problem and how to solve it???
help me please
Click to expand...
Click to collapse
I had the same problem too with fantastic b4. I could not enable wifi and bluetooth when the prophet is turned on a while. So the problem is the rom. I think it's a bug.
drmeemo said:
my sd size is 1 giga
it was working on wm5
but when i upgraded to wm6 it doesnt work any more
i tried another sd 512 miga the same problem appeared
Click to expand...
Click to collapse
i have the same problem too
I recently started having problems in my new Startrek and a with a very new 2GB sandisk microSD.
The phone sometimes can't see the contents of the card Images,Songs..etc .it shows only the thumbnails and file names ,but when i try to open ,edit,rename ..etc
any content of the storage card it gives "UNKOWN ERROR" with a random code.
I have to reboot "soft Reset" for the phone to correctly see the card contents .afer a few minutes , the problem comes back again .
i tried to use different memory cards, anothe 1 Gb microSD card ,and 256 mb microSd Card . But NoWay .. the same Issue ..
Notes :
1- i had installed the latest official rom again on the device .
2- My memory is a fat32 system .
Anyone else faced this problem .. ? any Solutions ?
Please Mates , try to help me ASAP as u can . if it's a Manufacturing issue , i will try to return the device back to the company.
My wishes and Regards,
Eng.Ghazall
that is hardware (Cingular 3125) problem
Oh Really !
are you sure my friend ?
Sorry , but can you tell me what is (Cingular 3125) " ?
Thank you So much my friend , So that i have To Get a new one "replace" from the Manufacturer ?
because it is dead..
Thank you so much Mr.Expert
My Regards.
Ghazall said:
Sorry , but can you tell me what is (Cingular 3125) " ?
Click to expand...
Click to collapse
Oh, sorry, i mean a StarTrek. Cingular 3125 is an american version of StarTrek.
btw, my brother have your problem with his startrek (with Kingston 2gb microsd card) too. thats hardware problem. But my startrek (with 2gb SanDisk microsd) works good.
Hi Erofich ,
thanks alot for your Nice reply ,
after reading too much threads and googling the problem , i discovered that this problem from the place of the memory stick "hardware problem"
so that i but a slim paper between the SIM card and the memory stick to press the memory into inside and make it stable in the place . i did that from 4 hours , and it is still Works Great Till now.
anyway , i will return back my device when i come back to my home country ..it's still under warrenty !
Thanks all Guys.
My Regards.
Thanks Ghazall, I put 1 small piece paper between memory and sim card, it's work well. till now my kingston 2gb memory card is readable.
hey guys i donno wads the problem but my PC is not running the RUU??
when i double click to execute it just shows no response..i mean this is strange..i found it when i downloaded sumits new ROM 23004 v6(old Gene) and i wanted to get it running on my Gene but then i faced this problem..
And the bigger problem is my camera button is malfunctioning at times when i press it,it gets stuck inside i donno y this happened coz i rarely use my camera and hence it has been pressed very rarely & also when i try the storage card method for this ROM 23004 v6 it just shows checking SD contents and den suddenly goes to the Bootloader mode..
I m Stuckup coz i had planned to change and test the upcoming ROMs in future ??
Can any of you guys provide me a solution??
chigz said:
hey guys i donno wads the problem but my PC is not running the RUU??
when i double click to execute it just shows no response..i mean this is strange..i found it when i downloaded sumits new ROM 23004 v6(old Gene) and i wanted to get it running on my Gene but then i faced this problem..
And the bigger problem is my camera button is malfunctioning at times when i press it,it gets stuck inside i donno y this happened coz i rarely use my camera and hence it has been pressed very rarely & also when i try the storage card method for this ROM 23004 v6 it just shows checking SD contents and den suddenly goes to the Bootloader mode..
I m Stuckup coz i had planned to change and test the upcoming ROMs in future ??
Can any of you guys provide me a solution??
Click to expand...
Click to collapse
Try downloading a fresh copy of RUU (you can find it on the first page of Ramersonw's cooking tutorial page.
Regarding camera button: Could be dust or something. Try cleaning up the Gene with a hard brush or something.
If your card is greater than 1 GB, SD Card update method will not work.
Addicted2xda said:
Try downloading a fresh copy of RUU
If your card is greater than 1 GB, SD Card update method will not work.
Click to expand...
Click to collapse
I have a 2Gb SD card wwhich i use especially for flashing and test rom for over six months. its just that the card must be formated fat32 and bigger than rom size thats it cards of any
size bigger than the rom size work...
@Chigz, check if your card is fat 32 format if not then format it..and you can use as fat32 no need to reformat it after flash..u can put your data in iy and next time you want to flash a rom just rename the rom file to geneimg.nbh and put it on th memory card no need to empty the card just be sure that there should be enough space t fit in the rom let your data be threit doesnt effect the upgrade process ..restart and hold camera button.....
@coolaj its not about FAT formatting dude i have updated around 10-20 Roms wid my same 1GB mem card and have faced no problems dude..and @addicted think i had already downloaded the fresh copy and tried the RUU but it dint work.anyway m re downloading the copy and tryin it again lets hope it works this time.. :-(
there should not be a problem if you already know how to flash via card...check the name of the rom file you have put on card
and what os u are using..
i am currently using WM 6.5 and the file name is RUU_signed.nbh..
@addicted hey dude i downloaded the RUU again no success :-(
chigz said:
i am currently using WM 6.5 and the file name is RUU_signed.nbh..
@addicted hey dude i downloaded the RUU again no success :-(
Click to expand...
Click to collapse
If flashing through card rename it to geneimg.nbh restart and hold camera button
whats the os of pc..
windows XP with Service pack 2
hey guys tahnks for your time and advices..actually my mem card just needed a format dintformat it since a long long time did it and now its performing the storage card update style thanks alot guyz..coolaj & addicted both thank u.
chigz said:
hey guys tahnks for your time and advices..actually my mem card just needed a format dintformat it since a long long time did it and now its performing the storage card update style thanks alot guyz..coolaj & addicted both thank u.
Click to expand...
Click to collapse
Just an advice, Symantec EPP f***s up with RUU and the tools folder supplied by Ramersonw . So be careful with the AV, Hope you have not changed your AV (and caused this problem) ?
BTW if your problem is closed, please hit the red triangle on right of your first post to close the thread .
Thank you
Hi all,
Got a wierd problem here that I hope someone is able to help me with. I delved into the world of flashing ROMs and seem to have done something to my memory card.
I've had an HD2 for over a year and have a 16GB memory card that has functioned perfectly over this time. I flashed the WM7 ROM onto the phone the other day (with no problems) and was able to use my memory card with WM7 with no problems.
I have now flashed Android 2.3 onto the phone and my memory card is now showing a capacity of only 200mb. I am unable to format it above this. I've had a good look around the forums/interweb but cannot seem to find a solution.
Anyone got any ideas?
Any help would be greatly appriciated.
BMStalker said:
Hi all,
Got a wierd problem here that I hope someone is able to help me with. I delved into the world of flashing ROMs and seem to have done something to my memory card.
I've had an HD2 for over a year and have a 16GB memory card that has functioned perfectly over this time. I flashed the WM7 ROM onto the phone the other day (with no problems) and was able to use my memory card with WM7 with no problems.
I have now flashed Android 2.3 onto the phone and my memory card is now showing a capacity of only 200mb. I am unable to format it above this. I've had a good look around the forums/interweb but cannot seem to find a solution.
Anyone got any ideas?
Any help would be greatly appriciated.
Click to expand...
Click to collapse
yep..
WP7 does that,
Download panasonic SD formatter , it should do the trick, Oh pls dont forget to back up data
mally2 said:
yep..
WP7 does that,
Download panasonic SD formatter , it should do the trick, Oh pls dont forget to back up data
Click to expand...
Click to collapse
Thanks, I downloaded the SDFormatter tool and when I run it, it still only gives me the option to format it as 200MB. I am unable to adjust the partition size. Is there anything else i need to do?
there is only one thing that you can do
go back to winmo 6.5 open sd formater and let it format the sd card
then you are done, full capacity will show up
i had the same problem for a while and i tried everything but winmo formater
seems to be the only one which can solve the problem