hey guys i donno wads the problem but my PC is not running the RUU??
when i double click to execute it just shows no response..i mean this is strange..i found it when i downloaded sumits new ROM 23004 v6(old Gene) and i wanted to get it running on my Gene but then i faced this problem..
And the bigger problem is my camera button is malfunctioning at times when i press it,it gets stuck inside i donno y this happened coz i rarely use my camera and hence it has been pressed very rarely & also when i try the storage card method for this ROM 23004 v6 it just shows checking SD contents and den suddenly goes to the Bootloader mode..
I m Stuckup coz i had planned to change and test the upcoming ROMs in future ??
Can any of you guys provide me a solution??
chigz said:
hey guys i donno wads the problem but my PC is not running the RUU??
when i double click to execute it just shows no response..i mean this is strange..i found it when i downloaded sumits new ROM 23004 v6(old Gene) and i wanted to get it running on my Gene but then i faced this problem..
And the bigger problem is my camera button is malfunctioning at times when i press it,it gets stuck inside i donno y this happened coz i rarely use my camera and hence it has been pressed very rarely & also when i try the storage card method for this ROM 23004 v6 it just shows checking SD contents and den suddenly goes to the Bootloader mode..
I m Stuckup coz i had planned to change and test the upcoming ROMs in future ??
Can any of you guys provide me a solution??
Click to expand...
Click to collapse
Try downloading a fresh copy of RUU (you can find it on the first page of Ramersonw's cooking tutorial page.
Regarding camera button: Could be dust or something. Try cleaning up the Gene with a hard brush or something.
If your card is greater than 1 GB, SD Card update method will not work.
Addicted2xda said:
Try downloading a fresh copy of RUU
If your card is greater than 1 GB, SD Card update method will not work.
Click to expand...
Click to collapse
I have a 2Gb SD card wwhich i use especially for flashing and test rom for over six months. its just that the card must be formated fat32 and bigger than rom size thats it cards of any
size bigger than the rom size work...
@Chigz, check if your card is fat 32 format if not then format it..and you can use as fat32 no need to reformat it after flash..u can put your data in iy and next time you want to flash a rom just rename the rom file to geneimg.nbh and put it on th memory card no need to empty the card just be sure that there should be enough space t fit in the rom let your data be threit doesnt effect the upgrade process ..restart and hold camera button.....
@coolaj its not about FAT formatting dude i have updated around 10-20 Roms wid my same 1GB mem card and have faced no problems dude..and @addicted think i had already downloaded the fresh copy and tried the RUU but it dint work.anyway m re downloading the copy and tryin it again lets hope it works this time.. :-(
there should not be a problem if you already know how to flash via card...check the name of the rom file you have put on card
and what os u are using..
i am currently using WM 6.5 and the file name is RUU_signed.nbh..
@addicted hey dude i downloaded the RUU again no success :-(
chigz said:
i am currently using WM 6.5 and the file name is RUU_signed.nbh..
@addicted hey dude i downloaded the RUU again no success :-(
Click to expand...
Click to collapse
If flashing through card rename it to geneimg.nbh restart and hold camera button
whats the os of pc..
windows XP with Service pack 2
hey guys tahnks for your time and advices..actually my mem card just needed a format dintformat it since a long long time did it and now its performing the storage card update style thanks alot guyz..coolaj & addicted both thank u.
chigz said:
hey guys tahnks for your time and advices..actually my mem card just needed a format dintformat it since a long long time did it and now its performing the storage card update style thanks alot guyz..coolaj & addicted both thank u.
Click to expand...
Click to collapse
Just an advice, Symantec EPP f***s up with RUU and the tools folder supplied by Ramersonw . So be careful with the AV, Hope you have not changed your AV (and caused this problem) ?
BTW if your problem is closed, please hit the red triangle on right of your first post to close the thread .
Thank you
Related
hi ol
i need ur help
i have imate jamin g4
i upgraded its rom from original wm5 to wm6 fantastic b4
i had these problems
1- the memory storeage card doesnt work the folders appears empty when i remove it and put it in again it works but not for long
2- the bluetooth and wifi dont work when i press on there icons in connection manger i have to try may be 10 times to make it work
where is the problem and how to solve it???
help me please
drmeemo said:
hi ol
i need ur help
i have imate jamin g4
i upgraded its rom from original wm5 to wm6 fantastic b4
i had these problems
1- the memory storeage card doesnt work the folders appears empty when i remove it and put it in again it works but not for long
2- the bluetooth and wifi dont work when i press on there icons in connection manger i have to try may be 10 times to make it work
where is the problem and how to solve it???
help me please
Click to expand...
Click to collapse
I have the same problems with WIFI and if I take out SD card I have no problem so it's the sd card thats not compadible with your prophet
hello
i tried another sd card and the same problem appeared
my sd card works on my pc
drmeemo said:
hello
i tried another sd card and the same problem appeared
my sd card works on my pc
Click to expand...
Click to collapse
My one works too one pc only problem is wifi sometimes
whats the size of the sd? and is it SDHC <--- is not compadible with prophet yet
my sd size is 1 giga
it was working on wm5
but when i upgraded to wm6 it doesnt work any more
i tried another sd 512 miga the same problem appeared
drmeemo said:
my sd size is 1 giga
it was working on wm5
but when i upgraded to wm6 it doesnt work any more
i tried another sd 512 miga the same problem appeared
Click to expand...
Click to collapse
then it must be the rom's sd driver thats causing the problem it might help to flash an other rom
sd card .......
it's like my problem with tnt4 , gullum 5
as i told u gullum ,do u remmeber ?
all roms has the same problem except these roms
1- padv 06
2- k0ster
3- TrueNeytral_1.4
plz gullum take a look to these roms and find the solution before u release v6
and drmeemo try one of these roms that i point to it above
i'm a tester of v6, i've done after reading this tread a test with my 4 SD card
128mb (old one)
512mb
1gb
and 2gb (microsd with adapter)
all of them works without problem...
thanx all for these informations
ill try these roms and let u know
i have the same problem with lasted coffie rom there are any solution?
drmeemo said:
hi ol
i need ur help
i have imate jamin g4
i upgraded its rom from original wm5 to wm6 fantastic b4
i had these problems
1- the memory storeage card doesnt work the folders appears empty when i remove it and put it in again it works but not for long
2- the bluetooth and wifi dont work when i press on there icons in connection manger i have to try may be 10 times to make it work
where is the problem and how to solve it???
help me please
Click to expand...
Click to collapse
I had the same problem too with fantastic b4. I could not enable wifi and bluetooth when the prophet is turned on a while. So the problem is the rom. I think it's a bug.
drmeemo said:
my sd size is 1 giga
it was working on wm5
but when i upgraded to wm6 it doesnt work any more
i tried another sd 512 miga the same problem appeared
Click to expand...
Click to collapse
i have the same problem too
How to flash gene via memory card?
if possible give the instructions please
it is very easy so no one answer ?
OR it is impossible so no one answer ?
sd card flashing
polifon said:
How to flash gene via memory card?
if possible give the instructions please
Click to expand...
Click to collapse
hi, you must place the rom on the sd card and then softrest while holding down the camera button. this will make the phone enter the bootloader and look for a rom on the sd card. i think that roms have to be specially cooked to be flashef in this way
zinzar said:
it is very easy so no one answer ?
OR it is impossible so no one answer ?
Click to expand...
Click to collapse
yes it is too easy with a search in this forum so no one bother to reply...i think....
Format SD-Card as FAT32.
rename RUU_Siged.nbh to GENEIMG.nbh, Put GENEIMG.nbh on SD-CARD (root).
Charge your device at 100%!
Insert SD-Card in Gene, press AND HOLD "Camera" button, and do soft-reset.
If you see white screen with "Reading SD content":
Release "Camera" button, wait, and when countdown (start from 10s) in left-bottom corner of screen is appear, press "Power" button. Flashing is begin, and approx. 8 minutes long. After you will see "Success. Press any key". Do soft-reset. Congratulation.
PS: not all the rom can be flash via SD card, if you failed, do it the normal way with USB RUU
rexypow said:
yes it is too easy with a search in this forum so no one bother to reply...i think....
Format SD-Card as FAT32.
rename RUU_Siged.nbh to GENEIMG.nbh, Put GENEIMG.nbh on SD-CARD (root).
Charge your device at 100%...........................
PS: not all the rom can be flash via SD card, if you failed, do it the normal way with USB RUU
Click to expand...
Click to collapse
One thing more
In normal way by flashing using PC i make this before
1.Olipro's SPL for Old Gene
2. i have now white screen so i can flash the rom otherwise the device will breakdown if i did not jump the spl
SO by sd card there is no need to jump spl or what , explain please
greate very usefull info thanks
@Zinzar: I have never used JumpSPL trick, right from the time i flashed my first ROM, i flashed the HardSPL and as mine is a New Gene the Olipro method bricked it and then i unbricked it using Orefkov's method. HardSPL is permanently applied and is never needed to apply again. After that you can flash your phone in both way, RUU and SD Card. NO special thing is needed to do. just format the sd card with Fat32, 4096 kb cluster size (the default one), put the RUU_Signed.nbh on sd card and rename it to GENEIMG.nbh, reboot the phone in bootloader mode and it will read the rom file from sd card. After that just follow the onscreen instructions.
I hope i have answered your query coz i dont really got your question.
active sync not working after rom upgrade from sd card
hi all,
i have recently upgrade rom ver 6.5 21501 using sd card method.
now my gene could not connet with my pc for active sync.
i want to use other rom like 19971wwe_fusion9.nbh by lomlom. i like it very much.
when i soft-reset with camera button pressed, there is a try colour screen but don't show there below "usb", when i connect my phone to pc using cable.
please provide me the solution...
thanks to all....
during update from SD card...... it says reading second OS from SD, and then says "SD FAT update failed !!!"....... also is there a deriver for the 64-bit version of the USB method???
How to flash rom on gene from the sd card
hi
pls see below details for the same
.HOW TO FLASH ROM ON GENE FROM THE SD CARD
1. Rename the .nbh file of your rom of choice to GENEIMG.nbh, drop into the root of your SD card.
2.Poweroff your phone
3.hold the volume down key and while continuing to hold it power on ur phone
4. The Phone will go into the bootloader mode, and will auto detect the rom image from the SD Card and ask if you want to proceed by hitting the power button. Hit the power button and the rom will install
Note : it should take about 10-15 mins (as of now i have not tried this try at ur own risk )
also make sure that ur SD card is Fat32 or format the same to Fat32 & use a smaller memory card the smaller the better
this is as per my experience using the above method on my previous phone ie gene(P3400i)
correct me if im wrong
thanks
hari
i exactly did that..... i'm using a 2GB micro SD with an adapter.... it detects, starts, but at the reading second OS stage it fails with the error...........
Also RUU fails for 64bit system (Using Win7 HP x64).... did it on a friends 32bit....
shantanuthatte said:
i exactly did that..... i'm using a 2GB micro SD with an adapter.... it detects, starts, but at the reading second OS stage it fails with the error...........
Also RUU fails for 64bit system (Using Win7 HP x64).... did it on a friends 32bit....
Click to expand...
Click to collapse
rename the ruu_signed.nbh to GENEIMG.nbh and the flash a custom rom via storage card.
rom upgrading works very fine on win7 64bit.you Just need to use the right drivers for the same.
karan999 said:
rename the ruu_signed.nbh to GENEIMG.nbh and the flash a custom rom via storage card.
rom upgrading works very fine on win7 64bit.you Just need to use the right drivers for the same.
Click to expand...
Click to collapse
yes i did rename the file, then formated using fat32, 4096 allocation size.... copy the renamed file, inserted in phone, reset + camera button.... then power befor 10secs........ the process saarts but as i said... fails when it tries to read second OS......... the driver specifies for win7, vista in the guide works only for 32bit systems....
shantanuthatte said:
yes i did rename the file, then formated using fat32, 4096 allocation size.... copy the renamed file, inserted in phone, reset + camera button.... then power befor 10secs........ the process saarts but as i said... fails when it tries to read second OS......... the driver specifies for win7, vista in the guide works only for 32bit systems....
Click to expand...
Click to collapse
hi
make sure u put the rom on the root of ur SD not inside any folder OK
thanks
hari
yes there is only one file.... GENEIMG.nbh, no folder, no other file..... I tried with three ROMs, two customs by others, third one my own but a stock 21911 ie without changing anything all fail at same stage.... I has earlier (long before) HardSLP'ed mine to Oref.........
the memory card is SD 2GB when i put in ppc work and when i remve it and put it again doesn't work until i restart my ppc twice
any body can help me please
note:this thing happen in all roms
1. always stop programs from SD card before unplug,
2. always power off before unplug SD card,
3. what to do now?
3.1 apparently, your SD card is not healthy, let computer fixes it.
3.2 in PC, right click the SD card drive, select property, go to tool tab, look for option to scan disk, don't forget to select the 2 options (detect repair auto),
3.3 if PC restarts needed, Just Do It1!
4. if SD card really fixed, there should be a new folder created @ the root (SD, named likely found.000 or else), never touch it even much SD ram was being consumed.
Good Luck and use your card correctly.
mandogannah said:
the memory card is SD 2GB when i put in ppc work and when i remve it and put it again doesn't work until i restart my ppc twice
any body can help me please
note:this thing happen in all roms
Click to expand...
Click to collapse
nothing happened
thanks a lot
but nothing happened i do what you said but the problem still in my device
please help me if you have the answer
thanks to you
long time ago, I've had this problem too, but with my 4gb, hard resets, soft resets, nothing helped, the solution was to formate the card, and flash the phone with NVID RUU, that helped me so you can try it and I hope It will help
mandogannah said:
thanks a lot
but nothing happened i do what you said but the problem still in my device
please help me if you have the answer
thanks to you
Click to expand...
Click to collapse
1. fLASH other rom, try again,
2. Format SD card and try again.
thanks for your help
thanks for your help
but , can you help me with NVID RUU i don't know any thing about it
so if you can help i will be thanks to you
you have to download this nvidRUU
Its simple, like flashing wm6> then you will have default wm5, backup your data from SD and then formate her ;-) then just flash up to your favourite wm and its done ;-) so I dont know if this will help you, but it has solved my (same) problem with 4gb ;-) I hope it will be oK good luck
thanks for your attention
thanks for your help
i will try it and tell you what happen
thanks
thanks alot
it's still happen on my device but with different way
i should switch off my pda and switch on to make it work
Maybe dirty contacts in the prophet.
Try cleaning contacts with compressed air.
I need a profeesional who could help me what to do?
First I tried to instal a new rom through using MiniSD memory card, so i got the files from a very reputable website whish is this one. the name of rom WM 6.5 21500. I entred into the bootloader, it successfully dedected the MIni SD. but the screen stoped i was not able to make a choice through the menu.
So i removed the battery then the phone doesn't want to open.
Plz can any one help me, by just telling me what to do.
islamaburahmah said:
I need a profeesional who could help me what to do?
First I tried to instal a new rom through using MiniSD memory card, so i got the files from a very reputable website whish is this one. the name of rom WM 6.5 21500. I entred into the bootloader, it successfully dedected the MIni SD. but the screen stoped i was not able to make a choice through the menu.
So i removed the battery then the phone doesn't want to open.
Plz can any one help me, by just telling me what to do.
Click to expand...
Click to collapse
Repeat the process, but instead instal one of these great ROM's from here to your device.
Obelixossauro said:
Repeat the process, but instead instal one of these great ROM's from here to your device.
Click to expand...
Click to collapse
as i have told you that he does not want to open, i tries several times to enter into the boot loader using a key combination of holding record+volume+restart. the results are the same======> blank screen
How to Install new ROM - Atom Life
Buddy,
Below is the guide...hope this helps.
http://forum.xda-developers.com/showthread.php?t=535064
is ur WM6.5 21500 file is AL1.DIO or something else?
what is ur SDcard size? is it larger than 2G?
is ur SD card properly formatted to FAT partition?
please provide some infos....
oza_crazy said:
is ur WM6.5 21500 file is AL1.DIO or something else?
what is ur SDcard size? is it larger than 2G?
is ur SD card properly formatted to FAT partition?
please provide some infos....
Click to expand...
Click to collapse
my WM6.5 is 23089... is use 2GB card (Kingston) and formatted....try changing to a branded miniSD card.
juliuscezar said:
my WM6.5 is 23089... is use 2GB card (Kingston) and formatted....try changing to a branded miniSD card.
Click to expand...
Click to collapse
well... i know...
thanks for sharing. but i'm asking those question to Islamaburahmah.
in fact.. i always use V-Gen 512Mb for upgrading.
never fail.
even a "half dead" ATOM/ATOM EXEC have been fully recovered by my Luvly V-gen 512Mb. no need for JTAG unless a real Brick which can't entering bootloader at all. (did a little trick on ATOM wiki plus some improvisation to push the device entering bootloader)
hehehe....
yesterday i have revived a "stuck in DSUU Mode" Atom Life due to a Failed upgrade process from PC. (the PC is restarting itself when My Friends Running the official WM6 .EXE ROM Updater (get it from www.seeo2.com)
Hello everybody!
I hope you can help me.
I got HD2 European.First when i unpack it,it was the official firmware 1.66,i downloaded the last one,and flashed it,after i made HSPl.It was good,but the custom that i was downloaded was a bit buggy,so i wanted to make an back up to old,official.I tried to flash it form my sd card,but here starts the most weird thinks.Its not flashing from sd card.I removed the HSPL,by the HSPL method and chose the 2.08.0000(from some forum told me to do that,to remove hspl)
But now i got memory bag,i cant install any program because there is no memory.
Please help me,how can i flash it with original firmware,to make it as it was from the shop?
Why its not flashing from sd card?(i tried on 3 sd cards,but still nothing.....)
I see the boot,starts the loading for a sec,and again boot.
Thx to everyone who can help me.
(I got the last firmware,boot 2080000)
anyone?
Please???
Put the phone into Bootloader Mode (with phone off, press and hold the Volume Down button, then tap the Power button). what does it display?
What size of SD card did you try to use to do the flashing with?
iannius said:
Hello everybody!
I hope you can help me.
I got HD2 European.First when i unpack it,it was the official firmware 1.66,i downloaded the last one,and flashed it,after i made HSPl.It was good,but the custom that i was downloaded was a bit buggy,so i wanted to make an back up to old,official.I tried to flash it form my sd card,but here starts the most weird thinks.Its not flashing from sd card.I removed the HSPL,by the HSPL method and chose the 2.08.0000(from some forum told me to do that,to remove hspl)
But now i got memory bag,i cant install any program because there is no memory.
Please help me,how can i flash it with original firmware,to make it as it was from the shop?
Why its not flashing from sd card?(i tried on 3 sd cards,but still nothing.....)
I see the boot,starts the loading for a sec,and again boot.
Thx to everyone who can help me.
(I got the last firmware,boot 2080000)
Click to expand...
Click to collapse
Hi
Can you flash via your computer with active sync or windows mobile device center?
Its better than using the sd card, as the micro sd i had was corrupted.
If you need stock roms : http://forum.xda-developers.com/showthread.php?t=623283
Russ