I need a profeesional who could help me what to do?
First I tried to instal a new rom through using MiniSD memory card, so i got the files from a very reputable website whish is this one. the name of rom WM 6.5 21500. I entred into the bootloader, it successfully dedected the MIni SD. but the screen stoped i was not able to make a choice through the menu.
So i removed the battery then the phone doesn't want to open.
Plz can any one help me, by just telling me what to do.
islamaburahmah said:
I need a profeesional who could help me what to do?
First I tried to instal a new rom through using MiniSD memory card, so i got the files from a very reputable website whish is this one. the name of rom WM 6.5 21500. I entred into the bootloader, it successfully dedected the MIni SD. but the screen stoped i was not able to make a choice through the menu.
So i removed the battery then the phone doesn't want to open.
Plz can any one help me, by just telling me what to do.
Click to expand...
Click to collapse
Repeat the process, but instead instal one of these great ROM's from here to your device.
Obelixossauro said:
Repeat the process, but instead instal one of these great ROM's from here to your device.
Click to expand...
Click to collapse
as i have told you that he does not want to open, i tries several times to enter into the boot loader using a key combination of holding record+volume+restart. the results are the same======> blank screen
How to Install new ROM - Atom Life
Buddy,
Below is the guide...hope this helps.
http://forum.xda-developers.com/showthread.php?t=535064
is ur WM6.5 21500 file is AL1.DIO or something else?
what is ur SDcard size? is it larger than 2G?
is ur SD card properly formatted to FAT partition?
please provide some infos....
oza_crazy said:
is ur WM6.5 21500 file is AL1.DIO or something else?
what is ur SDcard size? is it larger than 2G?
is ur SD card properly formatted to FAT partition?
please provide some infos....
Click to expand...
Click to collapse
my WM6.5 is 23089... is use 2GB card (Kingston) and formatted....try changing to a branded miniSD card.
juliuscezar said:
my WM6.5 is 23089... is use 2GB card (Kingston) and formatted....try changing to a branded miniSD card.
Click to expand...
Click to collapse
well... i know...
thanks for sharing. but i'm asking those question to Islamaburahmah.
in fact.. i always use V-Gen 512Mb for upgrading.
never fail.
even a "half dead" ATOM/ATOM EXEC have been fully recovered by my Luvly V-gen 512Mb. no need for JTAG unless a real Brick which can't entering bootloader at all. (did a little trick on ATOM wiki plus some improvisation to push the device entering bootloader)
hehehe....
yesterday i have revived a "stuck in DSUU Mode" Atom Life due to a Failed upgrade process from PC. (the PC is restarting itself when My Friends Running the official WM6 .EXE ROM Updater (get it from www.seeo2.com)
Related
hi,
i have a t mobile ppc edition.i have a 512 mb sd card,and when i install programs on my sd card after 2-3 days all the programs are erased and it keeps happening.can anyone help me pls?
there is a problem with sd/mmc and multiple inserts/removals. Its a bug of WM200X and there is no fix for it. I unlock my sd card only when I need to change the data on it. Otherwise my card stays locked. Do a search on this forum for "Multiple SD" and "SD Erase". Good luck!
interestingfellow said:
there is a problem with sd/mmc and multiple inserts/removals. Its a bug of WM200X and there is no fix for it. I unlock my sd card only when I need to change the data on it. Otherwise my card stays locked. Do a search on this forum for "Multiple SD" and "SD Erase". Good luck!
Click to expand...
Click to collapse
SO this bug is only WM2003/WM2003SE, no PPC2002?
KTamas said:
interestingfellow said:
there is a problem with sd/mmc and multiple inserts/removals. Its a bug of WM200X and there is no fix for it. I unlock my sd card only when I need to change the data on it. Otherwise my card stays locked. Do a search on this forum for "Multiple SD" and "SD Erase". Good luck!
Click to expand...
Click to collapse
SO this bug is only WM2003/WM2003SE, no PPC2002?
Click to expand...
Click to collapse
This bug only on wallaby's (XDA 1) running "WM2003 " it doesn't happen on WM2002.
I have an XDA 1 running 2002, and the SD card wipe problem also seem to happen to me.
I have an O2 Rom version 4.01.12 Eng.
According to this page: http://www.kbalertz.com/kb_843287.aspx
the problem might be related when two or more programs try to access the same files, so the data becomes corrupted and apparently being wiped...
Anyone have a solution or a suggestion?
I tried to follow this thread for a fix (Rune quoting spadb): http://forum.xda-developers.com/viewtopic.php?t=7230&highlight=sd+files
I can find in the registry a reference to a SD.DLL, but can't find it under file explorer, even when displaying hidden items.
Maybe one of you other XDA1\Wallaby users can find it in your device?
Tosh said:
I have an XDA 1 running 2002, and the SD card wipe problem also seem to happen to me.
I have an O2 Rom version 4.01.12 Eng.
Click to expand...
Click to collapse
4.01.12 is also WM2003 and not PPC2002
Stefan
oops
Newbies mistake
So anyone have found that DLL in the windows folder?
ramram said:
KTamas said:
interestingfellow said:
there is a problem with sd/mmc and multiple inserts/removals. Its a bug of WM200X and there is no fix for it. I unlock my sd card only when I need to change the data on it. Otherwise my card stays locked. Do a search on this forum for "Multiple SD" and "SD Erase". Good luck!
Click to expand...
Click to collapse
SO this bug is only WM2003/WM2003SE, no PPC2002?
Click to expand...
Click to collapse
This bug only on wallaby's (XDA 1) running "WM2003 " it doesn't happen on WM2002.
Click to expand...
Click to collapse
*whew*
Well, i guess i'll stay with PPC2002 then...
edit: and upgrade my signature
edit2: I had an SD-wipe-out few days ago with wm2003 4.01.12...so after searching on the forums i decided to go back to ppc2002...
Tosh said:
oops
Newbies mistake
So anyone have found that DLL in the windows folder?
Click to expand...
Click to collapse
Not searcherd for it on the device. But in the basic ROM its in there...
Should be located directly in the windows folder. i think you have to enable your device to see all files. Normaly dll's are hidden...
HTH
Stefan
I've enabled my device to see hidden files...
Can you upload and attach that DLL please?
I'd like to try to tweak the registry a bit :wink:
I've enabled my device to see hidden files...
Can you upload and attach that DLL please?
I'd like to try to tweak the registry a bit :wink:
hey guys,
try formatting ur sd card with cnetx flash format .it solved the problem to certain extent.its a share ware.if u like it pls purchase after the trial period.
drpvenugopal said:
hey guys,
try formatting ur sd card with cnetx flash format .it solved the problem to certain extent.its a share ware.if u like it pls purchase after the trial period.
Click to expand...
Click to collapse
Can anyone else confirm this? :roll: i really dont like PPC2002 but i dont want a wipeout again...
I'm afraid I can't confirm that, I tried to format many times as FAT32 or FAT16 and I experience the same problems as before...
Try this patch, it worked with me 100% on my Wallaby device with no SD erasings since more than 3 months 8)
Use any registry program (Resco Explorer 2003 is great) to install the registry keys or enter it manually..
Don't worry, the patch is non-destructive at all !
( you can do a backup before running this patch if you wish :wink: )
i saw stefan has a much longer version of this. does anyone have any experience with either file? BTW should i even do this if i have never had the problem before?
cheers
Similar problem on XDA II
I have noticed a similar disease on my Qtek 2020 (XDAII):
When I run it with an SDCard 512 Mb there is no problem at all, goes perfect, but as soon as I put in a brand new 1 GB SD card it crashes within a day or two. And it is irreparable... I've sent back one card to the supplier, but now on my second try with a new card and after reading in this topic I begin to felle a bit coldsweating... :x
Anyone else who has specific experince of this on XDAII?
Yup. went to use navigator today and found my SD card was nor showing. Tried it in a digicam at work which crashed the cam.
In my card reader here format shows as RAW and am having a help of a job getting it reformatted.
I use the XDA II
I also face similar problem, what i used to do is just take my sd card out and re-insert
and it worked for me
removing and replacing the card has no effect for me.
can anyone help with formatting an SD card (1GB viking) that is "unreadable" in a card reader and in RAW format??
pretty please?!??
How to flash gene via memory card?
if possible give the instructions please
it is very easy so no one answer ?
OR it is impossible so no one answer ?
sd card flashing
polifon said:
How to flash gene via memory card?
if possible give the instructions please
Click to expand...
Click to collapse
hi, you must place the rom on the sd card and then softrest while holding down the camera button. this will make the phone enter the bootloader and look for a rom on the sd card. i think that roms have to be specially cooked to be flashef in this way
zinzar said:
it is very easy so no one answer ?
OR it is impossible so no one answer ?
Click to expand...
Click to collapse
yes it is too easy with a search in this forum so no one bother to reply...i think....
Format SD-Card as FAT32.
rename RUU_Siged.nbh to GENEIMG.nbh, Put GENEIMG.nbh on SD-CARD (root).
Charge your device at 100%!
Insert SD-Card in Gene, press AND HOLD "Camera" button, and do soft-reset.
If you see white screen with "Reading SD content":
Release "Camera" button, wait, and when countdown (start from 10s) in left-bottom corner of screen is appear, press "Power" button. Flashing is begin, and approx. 8 minutes long. After you will see "Success. Press any key". Do soft-reset. Congratulation.
PS: not all the rom can be flash via SD card, if you failed, do it the normal way with USB RUU
rexypow said:
yes it is too easy with a search in this forum so no one bother to reply...i think....
Format SD-Card as FAT32.
rename RUU_Siged.nbh to GENEIMG.nbh, Put GENEIMG.nbh on SD-CARD (root).
Charge your device at 100%...........................
PS: not all the rom can be flash via SD card, if you failed, do it the normal way with USB RUU
Click to expand...
Click to collapse
One thing more
In normal way by flashing using PC i make this before
1.Olipro's SPL for Old Gene
2. i have now white screen so i can flash the rom otherwise the device will breakdown if i did not jump the spl
SO by sd card there is no need to jump spl or what , explain please
greate very usefull info thanks
@Zinzar: I have never used JumpSPL trick, right from the time i flashed my first ROM, i flashed the HardSPL and as mine is a New Gene the Olipro method bricked it and then i unbricked it using Orefkov's method. HardSPL is permanently applied and is never needed to apply again. After that you can flash your phone in both way, RUU and SD Card. NO special thing is needed to do. just format the sd card with Fat32, 4096 kb cluster size (the default one), put the RUU_Signed.nbh on sd card and rename it to GENEIMG.nbh, reboot the phone in bootloader mode and it will read the rom file from sd card. After that just follow the onscreen instructions.
I hope i have answered your query coz i dont really got your question.
active sync not working after rom upgrade from sd card
hi all,
i have recently upgrade rom ver 6.5 21501 using sd card method.
now my gene could not connet with my pc for active sync.
i want to use other rom like 19971wwe_fusion9.nbh by lomlom. i like it very much.
when i soft-reset with camera button pressed, there is a try colour screen but don't show there below "usb", when i connect my phone to pc using cable.
please provide me the solution...
thanks to all....
during update from SD card...... it says reading second OS from SD, and then says "SD FAT update failed !!!"....... also is there a deriver for the 64-bit version of the USB method???
How to flash rom on gene from the sd card
hi
pls see below details for the same
.HOW TO FLASH ROM ON GENE FROM THE SD CARD
1. Rename the .nbh file of your rom of choice to GENEIMG.nbh, drop into the root of your SD card.
2.Poweroff your phone
3.hold the volume down key and while continuing to hold it power on ur phone
4. The Phone will go into the bootloader mode, and will auto detect the rom image from the SD Card and ask if you want to proceed by hitting the power button. Hit the power button and the rom will install
Note : it should take about 10-15 mins (as of now i have not tried this try at ur own risk )
also make sure that ur SD card is Fat32 or format the same to Fat32 & use a smaller memory card the smaller the better
this is as per my experience using the above method on my previous phone ie gene(P3400i)
correct me if im wrong
thanks
hari
i exactly did that..... i'm using a 2GB micro SD with an adapter.... it detects, starts, but at the reading second OS stage it fails with the error...........
Also RUU fails for 64bit system (Using Win7 HP x64).... did it on a friends 32bit....
shantanuthatte said:
i exactly did that..... i'm using a 2GB micro SD with an adapter.... it detects, starts, but at the reading second OS stage it fails with the error...........
Also RUU fails for 64bit system (Using Win7 HP x64).... did it on a friends 32bit....
Click to expand...
Click to collapse
rename the ruu_signed.nbh to GENEIMG.nbh and the flash a custom rom via storage card.
rom upgrading works very fine on win7 64bit.you Just need to use the right drivers for the same.
karan999 said:
rename the ruu_signed.nbh to GENEIMG.nbh and the flash a custom rom via storage card.
rom upgrading works very fine on win7 64bit.you Just need to use the right drivers for the same.
Click to expand...
Click to collapse
yes i did rename the file, then formated using fat32, 4096 allocation size.... copy the renamed file, inserted in phone, reset + camera button.... then power befor 10secs........ the process saarts but as i said... fails when it tries to read second OS......... the driver specifies for win7, vista in the guide works only for 32bit systems....
shantanuthatte said:
yes i did rename the file, then formated using fat32, 4096 allocation size.... copy the renamed file, inserted in phone, reset + camera button.... then power befor 10secs........ the process saarts but as i said... fails when it tries to read second OS......... the driver specifies for win7, vista in the guide works only for 32bit systems....
Click to expand...
Click to collapse
hi
make sure u put the rom on the root of ur SD not inside any folder OK
thanks
hari
yes there is only one file.... GENEIMG.nbh, no folder, no other file..... I tried with three ROMs, two customs by others, third one my own but a stock 21911 ie without changing anything all fail at same stage.... I has earlier (long before) HardSLP'ed mine to Oref.........
hey guys i donno wads the problem but my PC is not running the RUU??
when i double click to execute it just shows no response..i mean this is strange..i found it when i downloaded sumits new ROM 23004 v6(old Gene) and i wanted to get it running on my Gene but then i faced this problem..
And the bigger problem is my camera button is malfunctioning at times when i press it,it gets stuck inside i donno y this happened coz i rarely use my camera and hence it has been pressed very rarely & also when i try the storage card method for this ROM 23004 v6 it just shows checking SD contents and den suddenly goes to the Bootloader mode..
I m Stuckup coz i had planned to change and test the upcoming ROMs in future ??
Can any of you guys provide me a solution??
chigz said:
hey guys i donno wads the problem but my PC is not running the RUU??
when i double click to execute it just shows no response..i mean this is strange..i found it when i downloaded sumits new ROM 23004 v6(old Gene) and i wanted to get it running on my Gene but then i faced this problem..
And the bigger problem is my camera button is malfunctioning at times when i press it,it gets stuck inside i donno y this happened coz i rarely use my camera and hence it has been pressed very rarely & also when i try the storage card method for this ROM 23004 v6 it just shows checking SD contents and den suddenly goes to the Bootloader mode..
I m Stuckup coz i had planned to change and test the upcoming ROMs in future ??
Can any of you guys provide me a solution??
Click to expand...
Click to collapse
Try downloading a fresh copy of RUU (you can find it on the first page of Ramersonw's cooking tutorial page.
Regarding camera button: Could be dust or something. Try cleaning up the Gene with a hard brush or something.
If your card is greater than 1 GB, SD Card update method will not work.
Addicted2xda said:
Try downloading a fresh copy of RUU
If your card is greater than 1 GB, SD Card update method will not work.
Click to expand...
Click to collapse
I have a 2Gb SD card wwhich i use especially for flashing and test rom for over six months. its just that the card must be formated fat32 and bigger than rom size thats it cards of any
size bigger than the rom size work...
@Chigz, check if your card is fat 32 format if not then format it..and you can use as fat32 no need to reformat it after flash..u can put your data in iy and next time you want to flash a rom just rename the rom file to geneimg.nbh and put it on th memory card no need to empty the card just be sure that there should be enough space t fit in the rom let your data be threit doesnt effect the upgrade process ..restart and hold camera button.....
@coolaj its not about FAT formatting dude i have updated around 10-20 Roms wid my same 1GB mem card and have faced no problems dude..and @addicted think i had already downloaded the fresh copy and tried the RUU but it dint work.anyway m re downloading the copy and tryin it again lets hope it works this time.. :-(
there should not be a problem if you already know how to flash via card...check the name of the rom file you have put on card
and what os u are using..
i am currently using WM 6.5 and the file name is RUU_signed.nbh..
@addicted hey dude i downloaded the RUU again no success :-(
chigz said:
i am currently using WM 6.5 and the file name is RUU_signed.nbh..
@addicted hey dude i downloaded the RUU again no success :-(
Click to expand...
Click to collapse
If flashing through card rename it to geneimg.nbh restart and hold camera button
whats the os of pc..
windows XP with Service pack 2
hey guys tahnks for your time and advices..actually my mem card just needed a format dintformat it since a long long time did it and now its performing the storage card update style thanks alot guyz..coolaj & addicted both thank u.
chigz said:
hey guys tahnks for your time and advices..actually my mem card just needed a format dintformat it since a long long time did it and now its performing the storage card update style thanks alot guyz..coolaj & addicted both thank u.
Click to expand...
Click to collapse
Just an advice, Symantec EPP f***s up with RUU and the tools folder supplied by Ramersonw . So be careful with the AV, Hope you have not changed your AV (and caused this problem) ?
BTW if your problem is closed, please hit the red triangle on right of your first post to close the thread .
Thank you
hi, and is it possible to downgrade an HD2 (i've install 7 on it) to win mo 6.5 (original rom of HTC)?
If it is what is the procedure?
'Cause i cannot syncrhonize it with active sync
Thanks a lot!
I believe it is to low level format your SD card and flash an original ROM (in fact I think some other custom ROMs can still be flashed instead) - however, to sync with win7 you need to use Zune - it is a free download and much better than media player and activsync
volesprit said:
hi, and is it possible to downgrade an HD2 (i've install 7 on it) to win mo 6.5 (original rom of HTC)?
If it is what is the procedure?
'Cause i cannot syncrhonize it with active sync
Thanks a lot!
Click to expand...
Click to collapse
1. Download your CORRECT STOCK ROM via HTC Website or your carrier website (if it is a branded HD2)
2. Extract the downloaded file. Find the file named: RUU_signed.nbh
Rename it to: leoimg.nbh
3. Copy it to the root directory of your micro sd card. Dont forget to reformat your micro sd card with FAT 32. Remember that your sd card need to be formatted because WP7 using different format.
4. Put your sd card to your phone. Go into bootloader, and follow the onscreen instruction.
Remember it will erase everything, including your HSPL.
Cheers..
Thanks a lot!!! exactly the type of response i need!
I forward this procedure to my friend who have the problem!!
Thanks again Silverwind!
volesprit said:
Thanks a lot!!! exactly the type of response i need!
I forward this procedure to my friend who have the problem!!
Thanks again Silverwind!
Click to expand...
Click to collapse
Gosh, I just couldn't remember how many times I write that kind of procedure
Hope it will help your friend...
Cheers...
Is the procedure the same when I have Android on my HD2 ?
pHOBIAZ7 said:
Is the procedure the same when I have Android on my HD2 ?
Click to expand...
Click to collapse
yes.
SOLVED: Flash won't start
Hey guys,
I tried the process silverwind described, but the flash didn't start. I was just stuck in the bootloader.
The problem was the sd card. First I tried it with the original 2GB sd card...didn't work. Then I used a 6GB SD card... and the process started.
Maybe this helps if somebody faces the same problem...
Greetz
Hi guys, so this is my situation:
I have dual boot WP7 (nand) and Android (sd). My SD card is partitoned, half for wp7, half for android.
I would like to try some custom WM roms now, and I don't know how to get back from wp7.
So:
1) How to go from WP7 to some custom WM6.5 rom?
2) Will I still be able to run Android form SD card?
Thanks,
There is more than enough information on this topic available at xda. Do a search first please.
Cenobite_ said:
There is more than enough information on this topic available at xda. Do a search first please.
Click to expand...
Click to collapse
+1 for this.
It´s just astonishing that we have to repeat again and again the same story:
Simply flash your stock ROM via SD card method, this way, you will completely erase everything on your phone. The SD card itself will not be changed, btw.
You might also flash via USB using the RUU.exe file, to keep HSPL, but I still would recommend to start from scratch.
Can someone please help me?
I have the same problem after formatting my sd card and trying to remove hspl, now it says "Not allow" when i turn my phone on and then displays the same as OP's phone, I'm freaking out, i don't know how to access SD card when i can't turn on my phone please help :[
Try doing a task29 then flashing a stock rom. It should erase the spl and every thing else. From there you should be able to do what you want with Wm and SD android.
Sent from my HD2 using XDA App