I tried to upgrade my QTek from 1.66 to i-mate 1.72
Then it turned off and it won't turn on again
Can anyone tell how to make it work again?
Please help
You will have to give more details I'm afraid.
ie
Were there any messages on the PC during upgrade?
Was the AC power plugged into the cradle during the upgrade?
Is the display on the XDA2 completely blank? If not, does it say Serial or USB at the top and a version number at the bottom?If so, have you attempted to boot into "Bootloader mode"? (hold down D pad in it's central position and then hard reset)
Have you tried attempted to repeat the process on another PC?
Let us know the answers to these queries, and then perhaps we can help more.
Cheers
Ant
buy another Qtek2020 coz yours gone dead forever ..... "Game Over"
maybe yours confused of repeating upgrade and shut itself off
hardluck :wink:
Goto "bootloader mode" & try to upgrade again.
I don't understand , when there's a failure during upgrade ( happened to me many times ) , u go to the Bootloader with the " Serial " and " V1.* ", and restart upgrade :shock: :!: :!: :!:
I usually don't mind newbies asking questions but this particulat question has been addressed at least 50 times and a simple search for "dead 2020" would have resulted in a fix for your problem.
To fix your problem do a search on how to put your PDA in the boot loader mode and then try to restart your update while in the bootloader mode.
To put your 2020 in the bootloader mode just hold down the round joystick button while holding down the power and the reset button on the side.
Good luck
When your turn it on do you see this:
SERIAL
Vx.xx
(x.xx = version number ist variable)
(if you see this you are in boot mode)
PLEASE:
if thats so PLEASE search forum first the solution is out there!!!
there are about 1001 topics about it, so you will find a solution!!!
(To get it in boot mode press ON/OFF button, Softreset and The big round button at the same time if you the boot mode goto PLEASE: 8) )
good luck!!
I have an XDAII that came with WM 1st ed, upgraded to WMSE with ROM 2.20.
After some trouble with that ROM I managed to downgrade to 2.06
When I soft reset, the Connection flash manager popup appears "Saved data is corrupted. System will erase all data to fix this error" Press yes or no.
Whatever I press the popup keeps showing after any Soft Reset.
I've taken my SD out and pressed "No" but that doesn't work.
The only time it worked to take out my SD was when I had ROM 2.20, but that ROM has some bugs so I downgraded.
Please help me. Thanx
...tried to unlockit with the athena-unlocker! After Step 1 it startet to Step2 und suddenly the connection was lost!
Now the battery lamp of the Ameo is in green mode!
I can make a factory reset, but I see no bootloader mode!
Screen is black an a green light aroundthe joystick! The Connection via active sync to my pc isn't available any mory!
What do you think?
game over - any change to bring my Ameo back to life?
Edit1: ther is no MiniSd Card inside
Hi, I do not think your Ameo is lost. Some else hat the same problem, please check http://forum.xda-developers.com/showpost.php?p=1358430&postcount=35 and try the steps described there. In most cases, it is also possible to flash WM6 if your device is stuck in the bootloader.
There are two things I would like you to try:
- To make a Hardreset hold the volume slider down and press the reset button.
- To enter Bootloader press and hold the camera button and press the reset button.
Do any of these work?
If any of these two works, you should be able to flash WM6.
...you were right - thx a lot 4 the solution
stupiddog said:
There are two things I would like you to try:....
- To enter Bootloader press and hold the camera button and press the reset button.
Do any of these work?
If any of these two works, you should be able to flash WM6.
Click to expand...
Click to collapse
At last -
That (your 2nd tipp) was the solution -WM& upgrade is now running on the ameo (now at 5%)!
Thx a lot
Jackpot thx -
Kisses from Austria
Many thx!
utakurt said:
At last -
That (your 2nd tipp) was the solution -WM& upgrade is now running on the ameo (now at 5%)!
Click to expand...
Click to collapse
You're welcome, have fun with WM6 However, if you want to kill the SIM-Lock/Net-Lock on your device, you have to run the unlocker again. It seems that WM5 has some problems running the unlocker while WM6 does not.
After you successfully run the unlocker again, remember to flash your WM6 ROM again (watch the battery power, it should always be >50% before starting flashing!) so you have the newest Radio version.
If problems persist after flashing, this page in the XDA wiki might be helpful: http://wiki.xda-developers.com/inde...e Athena Unlocker - the Black Screen of Death
stupiddog said:
There are two things I would like you to try:
- To make a Hardreset hold the volume slider down and press the reset button.
- To enter Bootloader press and hold the camera button and press the reset button.
Do any of these work?
If any of these two works, you should be able to flash WM6.
Click to expand...
Click to collapse
Hi, mate
Wot if those two things does not work??
i mean
if we can not get into boot loader or hard reset
i have this ameo does not go into boot loader or does not do hardreset
only red light on the joystick
problem occured while unlocking with Olipro, completing step 1 (got stuck at the point of saving the spl file)
thank you very much in advance for your help
BR,
Hi, Excuse me if this has been answered already but I couldn't find it if it has!
I'm trying to upgrade my M3100 to WM6 - Schaps 4.31. I've unlocked the phone and installed Hard SPL v7. When it goes through the Schaps upgrade, I get to the final 'next' button, press it and then the progress bar appears. The M3100 screen goes blank, activesync closes and then the upgrade hangs. Then a Error 260 conection message comes up and, after a few minutes, the M3100 bursts into life.
I've tried resetting the PC and the M3100 with no sucess. I am using Activesync 4.5 & Windows XP SP2
Any help is appreciated. Thanks.
Phil
Try disabling all firewalls, it may be worth trying to flash using the SDCard method. This is a very common issue I'm sure if you search the forum for 260 you will find loads of entries.
Also have a read of this which should help you.
http://forum.xda-developers.com/showthread.php?t=299462
The official Orange M3100 ROM (and probably most official ROMs) comes with a doc which explains all of the error numbers and what to do.
My suggestion would be to do the following as you'll be told to try this before looking further into it:
instead of connecting to ActiveSync and running the update .exe file, do this:
Disconnect device from desktop PC altogether;
Open ActiveSync;
Go into File > Connection Settings and UNcheck the 'allow USB' option - odd as that may seem;
Put your Hermes into bootloader mode (press and hold left-side 'ok' button and right-side 'power' button whilst soft-resetting with stylus), seeing tri-colour screen and the word 'Serial';
When in tri-colour screen, with 'Serial' displayed, THEN connect device to desktop PC via USB cable, even though you've disabled USB connections;
'Serial' will change to 'USB' on the tri-colour screen;
Run the update from Schap's or whoever.
Hopefully that will have worked. Good luck, mon ami.
Chunkymonkey, Progress I think....
Bootloader screen comes up but now I get 1% progress on the update and then Error 244 Invalid Model ID.
For info - bootloader screen reads:-
IPL-1.04
SPL-2.10 Olipro
Thanks
pbunn said:
Chunkymonkey, Progress I think....
Bootloader screen comes up but now I get 1% progress on the update and then Error 244 Invalid Model ID.
For info - bootloader screen reads:-
IPL-1.04
SPL-2.10 Olipro
Thanks
Click to expand...
Click to collapse
Invalid Model ID?
Although you have Olipro's clever rework of SPL on (good), have you also Super-CIDed your M3100?
chunkymonkey said:
Invalid Model ID?
Although you have Olipro's clever rework of SPL on (good), have you also Super-CIDed your M3100?
Click to expand...
Click to collapse
I thought I had - I tried a Vodafone SIM card in it and it worked. I'll do it again to be sure.
Phil
Chunkeymonkey,
Used HTC Hermes SIM & CID Unlock - v3a to Super-CID - I still get the error 244 Invalid ID....
Phil
are you connecting thru a usb hub/multi port,if so dont,,,,,, only connect thru a direct usb connection
pbunn said:
Chunkeymonkey,
Used HTC Hermes SIM & CID Unlock - v3a to Super-CID - I still get the error 244 Invalid ID....
Phil
Click to expand...
Click to collapse
Odd. Should only do that when the Hermes believes the ROM you're using isn't meant for it.
Can't remember if the Super-CID happens automatically with the SIM-unlock using that tool or if it is optional. If it was optional, might want to make sure it actually IS super-CID as you might just be sim-unlocked maybe.
To check CID status use mtty.exe. Put your phone into bootloader, disable USB connections in ActiveSync on desktop PC (File > Connections > Disable USB connections) and then plug Hermes to PC. Run mtty and type task 32. Response "Level=0xFF" means it's NOT Super-CID. Response "Level=0" means it IS Super-CID.
Came back with "level=0" but still no joy flashing the rom.
I'm trying to upgrade my M3100 to WM6 - Schaps 4.31. I've unlocked the phone and installed Hard SPL v7. When it goes through the Schaps upgrade, I get to the final 'next' button, press it and then the progress bar appears. The M3100 screen goes blank, activesync closes and then the upgrade hangs. Then a Error 260 conection message comes up and, after a few minutes, the M3100 bursts into life.
I've tried resetting the PC and the M3100 with no sucess. I am using Activesync 4.5 & Windows XP SP2
Click to expand...
Click to collapse
I had exactley the same problem with my M3100.
Try using a different USB port on your PC. Don't what the difference was but it worked for me.
Re downloaded Schaps_WM6Pro_Hermes_4.30_WWE_Full.exe and all seems to work OK. Not sure if there was an issue in the original download but it all looks cool now.
pbunn said:
Re downloaded Schaps_WM6Pro_Hermes_4.30_WWE_Full.exe and all seems to work OK. Not sure if there was an issue in the original download but it all looks cool now.
Click to expand...
Click to collapse
probably would have been worth loading 4.31 WWE. Very stable and fast.
pbunn said:
Re downloaded Schaps_WM6Pro_Hermes_4.30_WWE_Full.exe and all seems to work OK. Not sure if there was an issue in the original download but it all looks cool now.
Click to expand...
Click to collapse
Nice one mate
Now gone to version 4.31 and the phone skin has gone back to the old style.
Do you know where I can get the updated one from? Is there a cab file available?
if you go to --> Start > Settings > Today it should show a list of themes you can apply. just select one and press 'ok'. sorry if this isnt what u mean
raggers said:
if you go to --> Start > Settings > Today it should show a list of themes you can apply. just select one and press 'ok'. sorry if this isnt what u mean
Click to expand...
Click to collapse
Raggers,
No that's not what I mean. In version 4.30 there was a different phone pad tothe one I have with version 4.31 - it has gone back to a wm5 type. Also - there is no 'Airplane' mode in connection manager that allows me to turn everthing off in one hit.
I have installed SCHIST WM6.5 21864 in my ASUS P527. I have set the simple 4 digit password. it was working fine. but, when i put the correct password also it is showing as "incorrect password" OR sometime no message will display.
I tried hard reset by pressing "RESET" button & scroll button But the same lock screen will appear again
Please help me to hard reset my phone
Thanks in advance