Only one short question! -Only one short answer! ;-)
I´ve flashed my hermes to the 1.35 radio rom. Now iam getting these ****ty
radio waves signals out of the hermes´s earspeaker . And it is possible that i have to send in my device, because i have several problems with sending sms. Because of these things it would be very nice if it is possible to flash back to the shipped version of the Radio Rom(1.27.00.00)
I tried to flash back with
RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe
and it completed succesfully but on the hermes is still the 1.35 Version of the radio rom.
THX
You will need the sspl version of the installer. It can be downloaded here.
hmm, so i took the wrong radio ROm version?
on this site:
http://forum.xda-developers.com/showthread.php?t=291827
i took the first one because i have a herm300 from t-mobile.
So i only have to flash with the version you gave me, and thats all?
Update radio without Activesync connetion
Can I update this rom version without any activesycn connection. My HTC TYTN is hang out after rom dwwongrading and now it start unitl windows loading screen. I think that only alternative is download new rom with help of three colour screen usb connetion or with help of mtty program. My bootloader version is 1.09
Please let me know your opinions,
Juha
@Miliano: you are correct. The sspl download for v1.27 was created by wpbear.
Unbelievably, I found the link for you by looking in the Hermes WiKi....
@frontpage: sspl based flashing won't work unless windows mobile can load
Hello knowledgeable people,
I am sure that I will get flamed, as I am sure that this has been asked before, but after searching I cannot find a solid answer. I am not new to flashing my rom but have only flashed the radio once. I want to upgrade to a newer radio using the SD card method. I have DCDs 3.2.6 and am curious that if I flash only the radio if I will have to re-flash the rom as well, or will the new radio just write over the pre-existing radio and leave the rom untouched?
any insight?
flash away
just flash the radio only nbh file and it will only upgrade the radio
just extract the radio u want to flash to into your SD card
download it from DCD's storage site here
i highly recommend 3.42.40....power+camera+reset, will flash radio only leaving ur phone just how u had it seconds before only with a newer radio
hey if u get some problem with 3.42where your text messages gets lost in transaction or u recieve the message 2-3 minutes late I recommend using radio 3.39
Just a heads up it took me forever to fix this
As linked in the current leading sticky thread of the forum: "NEED HELP?? LOOKING FOR GUIDES?? NEW?? Read the XDA-Wiki for the Titan before posting"
the main Titan Wiki has a link to Upgrading Custom ROMs/Kitchens & associated radios with flashing guides - Titan with GPS Home Page - Windows Mobile 6.0 and 6.1 with GPS & EVDO Rev A
...there you will find Radio Upgrade - Changing the radio while keeping your current data & OS ROM untouched - via the microSD card flashing method
Dear Gentlemen,
I mad a big Mistake, I flashed my room with the Radio NBH file, My room v. 1.25 , IPL-V1.00
ATHE100, SPL-V1.07.0000. I download the new Radio 1.57 NBH file and use the ROMUpdateUtility.exe wich I got it from the Temp files came from upgrading the room to 6.5. coz I did not know how to upgrade the radio.
The proccess began and after few seconds the device stope responding except that I can but it in bootloader status. I think the Room is dameged and I need a way to recover the system again and upgrade it to the leatest ver.
Please if someone can Help.
Thanks.
I did try flashing the room
I did try flashing the room with "Athena_SPL1.2_WM6.1_R0-CleanEdition_MiChY" but I got this message ERROR [270] : update error.
another error
This is another error, Please see the attaches image. whem i'm trying to flash it with another room.
ahmadkaram said:
Dear Gentlemen,
I mad a big Mistake, I flashed my room with the Radio NBH file, My room v. 1.25 , IPL-V1.00
ATHE100, SPL-V1.07.0000. I download the new Radio 1.57 NBH file and use the ROMUpdateUtility.exe wich I got it from the Temp files came from upgrading the room to 6.5. coz I did not know how to upgrade the radio.
The proccess began and after few seconds the device stope responding except that I can but it in bootloader status. I think the Room is dameged and I need a way to recover the system again and upgrade it to the leatest ver.
Please if someone can Help.
Thanks.
Click to expand...
Click to collapse
Sorry to hear this.
You should have read a bit more first as you would have realised that you can't flash a radio without unlocking.
Using the unlocker would have changed the SPL to 1.2 and allowed you to flash the radio.
Have you tried doing a hard reset first?
You can only flash the original branded ROM for your machine now if you can find it.
Have a look in the wiki for original shipped roms.
I have a feeling the SPL1.07 was a dutch or german ROM that is very hard to find.
Good luck
Regards Lakeman
I just tried to flash a new radio rom to my 8525 via this link:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Choosing the 1.50.00.00 radio rom, downloaded files to my desktop. Instructions on the link above say to just extract and flash, but when I do, I'm prompted that I'll be overwriting Schap's O/S Rom!
Attaching image that I'm getting right before file flashes. This doesn't make sense to me that it would prompt me if I want to overwrite Schap's file. Please advise if I am going to brick my device if I flash this given the message I'm getting.
Thanks,
Linda
Will be fine, you won't overwrite the os, it will just update the radio rom. Just make sure you have Hard SPL 7 installed and please, use the sd method to flash the radio rom. If anything goes wrong with the flash, you WILL end up with a brick...
Thanks! The fact that the message was telling me I was about to overwrite Schap's OS had me very concerned. Yes, I have HardSPL loaded.
I have a very big problem. Yesterday i decidet to instal NAND Androin into my HTC HD2. In first step on my 1.66 stock ROM i instaled this http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 (HSPL3 and choose 2.08.0000). Everything flashing great but after thad i sow that i have a 2.07.51.22_2 radio version... so i decided to install 3.14 stock rom but i cant I was trying remove hspl but in boot screen i only seen "loading..." (my 2GB SD card was formated in FAT32 and i extracted file from ship but it doeosn't work). My question is what should i do to upgrade my phine to stock 3.14 ? Please help me
Sorry for my english
XFarellX said:
I have a very big problem. Yesterday i decidet to instal NAND Androin into my HTC HD2. In first step on my 1.66 stock ROM i instaled this http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 (HSPL3 and choose 2.08.0000). Everything flashing great but after thad i sow that i have a 2.07.51.22_2 radio version... so i decided to install 3.14 stock rom but i cant I was trying remove hspl but in boot screen i only seen "loading..." (my 2GB SD card was formated in FAT32 and i extracted file from ship but it doeosn't work). My question is what should i do to upgrade my phine to stock 3.14 ? Please help me
Sorry for my english
Click to expand...
Click to collapse
Don"t use stock ROM 3.14 if you will install/use NAND!
Stock ROM 3.14 isn't compatible with HSPL; and you will need HSPL for NAND.
Just install/upgrade your Radio version on your 1.66 stock ROM.
hmm but i want to have a 3.14 rom version costum or stock but i dont know how to do it. Could you help me ? How can i upgrade radio version ?? If i do this can i instal NAND Android ?
XFarellX said:
hmm but i want to have a 3.14 rom version costum or stock but i dont know how to do it. Could you help me ? How can i upgrade radio version ?? If i do this can i instal NAND Android ?
Click to expand...
Click to collapse
Like I mentioned before, if your attention is to use/install NA ROMND.
DON'T use stock ROM 3.14! NAND needs HSPL, and this isn't possible in combination with stock ROM 3.14!!!
Just upgrade your radio.
Yeah u should just upgrade your radio. no need to upgrade to 3.14.
I do not see the necessitiy to upgrade to 3.14 if you want to run Android NAND.
What you need to do is to start all over again.
1. Extract RUU_unsigned.nbh from stock 1.66 ROM, rename as leoimg.nbh, copy this file to the root of your SDCard.
2. Pop SDCard into device, Activate bootloader and it will load back your device to 1.66 stock condition.
3. HSPL your device again using HSPL3.
4. Upgrade your radio to whatever your liking (e.g 2.15 etc)
5. Flash any 3.14 custom ROM avaialble at this wonderful site.
cymagnus said:
5. Flash any 3.14 custom ROM available at this wonderful site.
Click to expand...
Click to collapse
Finally got an answer, so HSPL only not recommended for stock 3.14 ROM, but for custom ROM it's doesn't matter. Then we should use SSPL to flash this custom ROM right?
Thanks
cymagnus said:
Yeah u should just upgrade your radio. no need to upgrade to 3.14.
I do not see the necessitiy to upgrade to 3.14 if you want to run Android NAND.
What you need to do is to start all over again.
1. Extract RUU_unsigned.nbh from stock 1.66 ROM, rename as leoimg.nbh, copy this file to the root of your SDCard.
2. Pop SDCard into device, Activate bootloader and it will load back your device to 1.66 stock condition.
3. HSPL your device again using HSPL3.
4. Upgrade your radio to whatever your liking (e.g 2.15 etc)
5. Flash any 3.14 custom ROM avaialble at this wonderful site.
Click to expand...
Click to collapse
Ok, but in stock ship i have a RUU_signed.nbh not unsigned
XFarellX said:
Ok, but in stock ship i have a RUU_signed.nbh not unsigned
Click to expand...
Click to collapse
Yes you are right, maybe cymagnus mean was RUU_signed.nbh
erwinpiero said:
Finally got an answer, so HSPL only not recommended for stock 3.14 ROM, but for custom ROM it's doesn't matter. Then we should use SSPL to flash this custom ROM right?
Thanks
Click to expand...
Click to collapse
The only problem using SSPL is that you cant flash radio and you cant do task 29
As suggested in forums, you have to do task 29 before flashing rom in order to clean up the memory. If you use SSPL, you cant do that. So there is possibility that you will find bug(s) originating from previous rom.
Cheers...
XFarellX said:
I have a very big problem. Yesterday i decidet to instal NAND Androin into my HTC HD2. In first step on my 1.66 stock ROM i instaled this http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 (HSPL3 and choose 2.08.0000). Everything flashing great but after thad i sow that i have a 2.07.51.22_2 radio version... so i decided to install 3.14 stock rom but i cant I was trying remove hspl but in boot screen i only seen "loading..." (my 2GB SD card was formated in FAT32 and i extracted file from ship but it doeosn't work). My question is what should i do to upgrade my phine to stock 3.14 ? Please help me
Sorry for my english
Click to expand...
Click to collapse
Firstly, 2.08.0000 is NOT hspl, it is a stock spl version. You need to select 2.08.hspl when running HSPL3. To flash a new radio there is no need to install the whole rom, just download and flash the radio. Click on the link in my signature for my radio and there are plenty of standalone radio roms there. Flash the same way as a rom (as long as you have hspl installed).
If you are wanting to go Android don't install 3.14, just do the abovementioned items. If you really do want to go stock 3.14 rom, then you can do this once hspl is installed BUT it is not recommended and it is better to use the Goldcard method.
silverwind said:
The only problem using SSPL is that you cant flash radio and you cant do task 29
As suggested in forums, you have to do task 29 before flashing rom in order to clean up the memory. If you use SSPL, you cant do that. So there is possibility that you will find bug(s) originating from previous rom.
Cheers...
Click to expand...
Click to collapse
Ow i see, thank you for your clear explanation Mas, yes when we had HSPL then we can play a lot and it's a must to use task29. My misunderstanding too, if we flash HSPL then we could flash any ROMs, so we don't need SSPL. But still HSPL was not recommended for 3.14 stock ROM. I hope my conclusion is right.
Thank You
dude u need to go to the bootloader power and vol down.. and then flash... not the usb flasher in magldr.. hit thanks if this was the problem
erwinpiero said:
Yes you are right, maybe cymagnus mean was RUU_signed.nbh
Click to expand...
Click to collapse
Opps.. yeah it's RUU_signed.nbh. Got mix up with Nokia stuffs. lol.
ClydeB1 said:
Firstly, 2.08.0000 is NOT hspl, it is a stock spl version. You need to select 2.08.hspl when running HSPL3. To flash a new radio there is no need to install the whole rom, just download and flash the radio. Click on the link in my signature for my radio and there are plenty of standalone radio roms there. Flash the same way as a rom (as long as you have hspl installed).
If you are wanting to go Android don't install 3.14, just do the abovementioned items. If you really do want to go stock 3.14 rom, then you can do this once hspl is installed BUT it is not recommended and it is better to use the Goldcard method.
Click to expand...
Click to collapse
Thanks a lot !! Could you tell me how to instal stock 3.14 step by step ? I feel green in this topic
Stock 3.14 ROM won't be a good idea. There are many beautiful ROMs over there which give you the freedom to enjoy 576MB of RAM with proper radio versions. Stock is no good.. Be careful of what radio version you have while flashing ROMs as incompatible radio may prevent the phone from booting. Before installing android, check the compatible radio versions and install one before doing anything Check this for more info step by step http://forum.xda-developers.com/showthread.php?t=732380
Thanks, but i want install stoc rom 3.14 and i don't know how to do it because i have spl 2.08.0000 instaled via HSPL3. Someone can help me ? I don't wanna install android or any costum rom. Please help... i need stock rom 3.14
Okay! Download the 3.14 ROM from correct HTC website for your country. Once downloaded, open with WinRAR and extract RUU_signed.nbh to any folder. Rename it to LEOIMG.nbh and copy it to the root of your memory card. Make sure your memory card is formatted with FAT32 partition method. Insert the card in your phone (while phone is switched off) and hold the 'Volume down' button. Press power button while the Vol down button is pressed. Your phone will enter bootloader and you'll be able to flash the ROM. By this method, even if you have HSPL installed, it will be overwritten by stock SPL 3.03
Happy flashing! Dont forget to backup your personal data!
XFarellX said:
Thanks, but i want install stoc rom 3.14 and i don't know how to do it because i have spl 2.08.0000 instaled via HSPL3. Someone can help me ? I don't wanna install android or any costum rom. Please help... i need stock rom 3.14
Click to expand...
Click to collapse
Will you make your mind up. Firstly you wanted Android installed, then it was 3.14 custom or stock and now it is only 3.14 Stock ROM.
Thankfully you have the SPL of 2.08.0000, which means that HSPL has been removed.
Go to HTC's website and download the 3.14 ROM with your phone's serial number. If you are allowed to download the file, then there should be no problem in running it from your PC. If you get a 'you are not allowed to download this file', then you have to use the GoldCard method.
Whats wrong... I download from HTC site stock rom 3.14. Program found my phone and current instal version (1.66), when i click update status bar is still on 0% (after 20 minutes i desconect phone and turn on - everything works great but in 1.66 rom :/). After that i was trying updated via gold card method ( i prepared 2GB micro SD card - format in FAT32 and copy rename nbh file) but when i'm swith on my HD2 holding volume down button on the screen i can see "loading..." and nothing more
XFarellX said:
Whats wrong... I download from HTC site stock rom 3.14. Program found my phone and current instal version (1.66), when i click update status bar is still on 0% (after 20 minutes i desconect phone and turn on - everything works great but in 1.66 rom :/). After that i was trying updated via gold card method ( i prepared 2GB micro SD card - format in FAT32 and copy rename nbh file) but when i'm swith on my HD2 holding volume down button on the screen i can see "loading..." and nothing more
Click to expand...
Click to collapse
Did you downloaded the right stock ROM by using your S/N?