Hi
Can any one help to recovery my sx56 which i screwed up in trying to install linux from xanduax home page. I tried to recover, but i don't see any display on the screen. i did a reset and did a test on device, all test says successfull. Looks like the way i recovered is not correct. Now i dont even remember that how i did, because i did some many different way by reading some many posts on the google. Please let me know if any encoutered this situation.
Advance thanks.
good read
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
rom image
thanks for reply, where do i get the rom image.
i downloaded rom from below link http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
and followed all the steps as in the instructions. i dont see any display after the cold reset, but i can sync with my active sync and i can hear the startup sound in the background when i did cold reset. please let me know if i missed any steps.
thanks
Re: rom image
srujang said:
thanks for reply, where do i get the rom image.
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=ROMVersions
or http://www.romkitchen.de
Stefan
i downloaded rom from below link http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
and followed all the steps as in the instructions. i dont see any display after the cold reset, but i can sync with my active sync and i can hear the startup sound in the background when i did cold reset. there is no display after the recovery, please let me know if i missed any steps or need to any additional step to see the display.
Looks more like an harware error...
Stefan
i did a harware test with hard reset and did a autotest on hardware, it shows all test are ok.
I had the same problem as srujang. I installed a new ROM and it's working fine now.
mutho
can you send me the instructions and new rom link from where you downloaded and installed.
thanks.
srujan
WARNING 001: POWER ADAPTER NOT PLUGGED IN
I tried to install with new rom version which downloaded from the stefan's recomended link, it give me error saying that "WARNING 001: POWER ADAPTER NOT PLUGGED IN" and Please plug the power adapter into your Pocket PC and exits out. But the plug was in the socket, i didn't understand why it says plug in the power adapter. Please let me know if any one encountered this type of error.
Thanks in advance
Related
Hey everyone,
Can anyone help me fix this big problem.
I downloaded a update ROM from (http://www.xda-developers.com/incoming/rom160wwe/) with the name RUU16006WWE_T-mobile_NL.exe.
After trying to upgrading my device, the proces stopped and told me that there was a connection problem. After this, a tryed to re-connect my device to my computer and to finish the upgrade bud nothing happend and stil nothing happens. My T-mobile MDA is not responding to anything. And i can't connect to ActiveSync. The only thing that my mda shows is this (click on the picture too enlarge).
So ones again. HELP me PLEASSSS..... Send any comments to [email protected]
I hoop my Mda can be fix cause it cost me alot.
Don't panic Your device is in bootloader mode.
Just reset the device, place it back in the cradle and re-run the upgrade. It doesn't require ActiveSync as the upgrade process looks after its own connection.
Make sure the cradle is connected directly into a USB port on your PC and not to a hub. Also make sure the power supply is connected to the cradle.
Thanks for the fast replay bud....
Can you give me a specific step by step to do it the right way? I m not verry good in this kind of things... Thx anywhy
For the moment, hopefully, all you need to do is what I said above. Re-running the upgrade should work OK (although it may depend on what version ROM you had installed already). Give it a try and see what happens.
Wel it keeping telling me that RAPI.dll is missing. Even when i have downloaded RAPI.dll.
I had version 1.60 i think.
Do you no where i can download the version that i had?
Try re-installing Activesync. The latest version is 3.7.1 Build 4034.
You can get it from here: http://www.microsoft.com/downloads/...7c-ca96-48b4-b5d4-f3e047ca5108&DisplayLang=en
OK thx i wil try that...
I have stil a problem.
Where can i download the ROM version 1.60.00WWE? Cause i'm upgrading with 1.66 bud it showed an error
The same error? And at what point does it happen?
Also, please confirm which ROM you are trying to upgrade with, as you have stated two different versions so far.
dcs i'm sorry you're right.
Well, i'm now upgrading from nothing (it showed what ROM i currently have, nothing) to 1.60.06WWE. I download it from http://www.xda-developers.com/incoming/rom160wwe/ as i sad before. It has the name RUU16006WWE_T-mobile_NL.exe
reply for more info.
OK. So what is the current situation? Are you still having a problem? If so, what are the details and exactly when does it occur?
Yes, i still got some problems. One of the many is dat after a few min. or so later, the proces stops and i get an error. I have to do a soft reset and start the proces again. So i did.
Bud now i can't connect anymore. What you see below is what i constantly get to see. And it wil do nothing.
How long have you waited with that message displayed? It can sometimes take a while to get started properly. At that time can you see what is displayed on the device?
The picture that i just showed you, i get that immediatly after pushing next in the beginning field.
When the display (see picture) is shown, the display of my device is blank. There is nothing, no words.
OK. Just be to be sure. Put the device in boot loader mode by pressing and holding the jog button (bottom centre of device) and the power button at the same time and press reset button. This should show the bootloader screen with (in your case) Serial V1.03 displayed. Put the device in the cradle and it should say USB V1.03. Then restart the upgrade. When the initial screen displays on the PC click next and the screen you posted above will display while the PC handshakes with the device. Give this some time to complete. If all is well it will progress to the screen showing the versions, etc. and allow upgrade. Click upgrade and again it will show the screen you posted above for a while then (hopefully) continue.
I'm now bizzy with what you sad. 10min. so far.
10 Minutes with the display you posted above? If so then that is too long
Yes exacly... TOO long... i don't no what to do now.. anyways. I'm going to sleep now. I wanna thank you for everything.. I'll hope to speek too you tomorrow. Bye bye
OK. Sorry we couldn't get it sorted tonight . If I think of anything else I'll let you know.
Another thought came to me. Some people who have had this sort of problem found that using a different USB port or even another PC solved the problem.
i donwloaded something and putted it on my xda II, now it says serial and at the bottom vl.01 i can't use it it's tottaly black no hard reset works, HELP!
euh i really need uyrgent help i can't connect to theactive sync either, i just downloaded the new windows to my device clicked on something and then it went off and only black letters serial and v1.0. it's not my xda so HELP HELP HELP
don't panic...
you are in bootloader mode.
you've probably executed 'enterbl.exe', which is a part of every upgrade.
just connect your device with your pc and run normal upgrade/flash procedure.
buzz
but i can't use active sync anymyore, i unzipped the thing i downloaded and now it got 7 options to choose from but when i click it it opens a install program and in big red letters ROM IMAGE FILE NOT FOUND
it also says
the pocket pc software update cannot locate the ROM image file to update to your pocket pc. Download the correct rom update for your pocket pc and try again and i am a real noob in these thing
did you try a hard reset?
press the on/off button and the softreset button at the same time.
if that wont work
http://forum.xda-developers.com/viewtopic.php?t=18287
try putting that rom on your phone and dont forget to change the country id as described.
good luck friend!
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
bram said:
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
Click to expand...
Click to collapse
if you understand my english thats ok.
i completly understand german but im not so good in speaking it.
normaly we can only speak english here but we can make an exeption so you can speak german to me and i will speak english back. OK? or try the translator (www.freetranslation.com)
did you perform the hardreset?
activesync won't work aslong as serial is replaced by the word usb when in the cradle it's ok carry on with the upgrade
try another pc to upgrade!
thats happen to me too.. but...
i also try to install the downloaded items from this website (which is the new windows version 2003 SE), and soon after i start installing it, my desktop computer says "error has occure during the installation process".
:shock: i was very shocked when i see my device completely blank with a word says "USB (on the top)" and "Ver. 1.03 (on the bottom)".. i really panic beacuse my active sync doesn't worked.. but then i start to hard reset my xda then reconnect my device and try to install it several times (bercause sometimes the error message still appear..) after waiting for 5 step of installation which takes abaout 2 hours
tadaaaaaaa now i have an XDA IIs application on my phone...
So in conclusion:
1. do't be panic :wink:
2. try to hard reset ur device
3. reconnect ur device (even if the activesync won't recognized ur device)
4. Install the downloaded files..
5. wait until ur computer says "deleting extended rom" (or something like that)
6. be patient..
7. Pray to GOD..
8. and here you go you got new look for ur beloved xda.
good luck..
oh it works!!!!
there are no words for it and the landscape and the themes, it's BEAUTIFULL!! thanks alot everyone!!!!!!
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
pleeeeeaaase read/search the forum i know its fustrating when your phone apears to be dead but there are about 100000 topics about this problem and about 100000 times the solution!
greetings OMEGA_ReD
Guys,
I have been trying to find solution on forum, but it seems it will not be so easy ... My MDA1 shows only Wilkommen bei TMobile and soft version G32S54, R3.23.00, 3.16.45 and that is all It does not response on power or anything - it simply shows me Wilkommen or not (if power is unplugged and battery empty). You may see how it looks here: http://www.jester.it.pl/mda/MDA1.jpg I have only USB cable - so if there is any chance to solve this problem having only this cable - please show me the way.
What is the most important - my Active Sync does not see connection ((
Help ...
TIA
B
I think your ROM is corrupt. Try reflashing.
Instructions can be found here:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
Hi there,
Thanks for your help - right now I need to find appriopiate ROM Image and it should work...
BR,
B
It seems that I do not have ROM file ;((( and one I found does not work....
Any suggestions?
I will try to cook sth. and let you know
a problem I had
When I first tried to image my device, the usb flash mode using XDA tools didn't work. I think this was because I was using windows vista. Anyway this forced me to use the direct sd flash method, and thus I didn't get the instructions to cold reset my device after the flash, which does seem to make a difference. Have you tried that?
<edit>What do you mean it does not work? What happened exactly when you tried?</edit>
OK - first time did not work, because Hard reset did not worked My mistake ... after reset it seems fine - I made some cooking and I have nice ROM right now but... After another reset and after second upload Boot appears and Wallaby starts making tests. After last test made Diagnostics screen appears and to be honest I do not know what to do Hard reset just shuts down MDA and I cannot switch it on - I can start from the same begining - tests etc. I know I am really close to solve that ... and we will see.
Guys, thanks for your help
I have searched and searched these forums and have seen several other people with this problem but no solution. I have also looked through the wiki to no avail, so if someone can give me an answer I would really appreciate it.
I have been able to get into the bootloader screen (the r-g-b white stripes) however there is NO text (no serial, no usb) on the screen and it is not recognized by any pc. Can't get any response from mtty.exe because it can't see the USB port. Have tried on multiple PC's...
Is there another way to resurrect this athena or is it DOA?
Thanks,
-Alex-
Some pics of problem...
Blank bootloader...
Please help!
Did you try reflash by SDcard?
http://wiki.xda-developers.com/index.php?pagename=Athena_SD_Card_Flashing
jas_pik said:
Did you try reflash by SDcard?
http://wiki.xda-developers.com/index.php?pagename=Athena_SD_Card_Flashing
Click to expand...
Click to collapse
Yes...no joy.
Just stays on the tri-color screen with no indication that it is reading the card.
Thanks for the advice though!
Did you try resetting - camera button and reset button on the back (I think...) pressed together.
Forum search will tell you exactly...
ssutherland said:
Did you try resetting - camera button and reset button on the back (I think...) pressed together.
Forum search will tell you exactly...
Click to expand...
Click to collapse
Yes, tried the hard reset (camera + reset) the alternate reset (comm + camera + reset) and even the other reset (volume slider + camera + reset). And yes, I was pushing down firmly on the camera button.
Each reset brings me to the tri-color bootloader screen with NO text. No model number, no OS version, no "USB" / "Serial"....just the red-gree-blue-white stripes.
I have looked extensively at all the forums, used the google search for the site and combed the wiki with no luck.
So do you think it is a lost case?
-Alex-
Hello,
sorry for what's happening to you. Can you tell what led to this situation ? Were you trying to unlock your phone or just flashing a new rom ?
luthor_70 said:
Hello,
sorry for what's happening to you. Can you tell what led to this situation ? Were you trying to unlock your phone or just flashing a new rom ?
Click to expand...
Click to collapse
I was trying to load a new ROM but I assumed that I had to use the OliPro unlock first.
Got to the radio flash and that is where it crapped out.
Now that I have read a little more carefully it looks like I don't need to use the OliPro beyond the first step for the stateside unlocked 7501.
Thanks,
-Alex-
when your on bootloader ? does windows detect a usb generic device ?
Nope. Tried 3 different PCs. Shut down all the activesync processes. No luck. No detection that anything is cabled to the advantage.
I am thinking that it is warranty time.
Damn, I hate this....its just the principle of the thing...
-Alex-
bairda said:
Nope. Tried 3 different PCs. Shut down all the activesync processes. No luck. No detection that anything is cabled to the advantage.
I am thinking that it is warranty time.
Damn, I hate this....its just the principle of the thing...
-Alex-
Click to expand...
Click to collapse
Key rule to remember is to always make sure the Advantage is Fully charged. Try charinging it and reflashing it with the factory rom, located here. http://www.america.htc.com/download/RUU_Athena_HTC_US_2.19.453.4_105_1.47.51.00_Ship.exe. Keep us posted and let us know how it went
have you removed the sim and memory card
just checking basics
try that with a full charge and then enter bootloader and connect to usb
Thanks for all the help! I gave up and warrantied a new unit where I WAS successful in loading a new ROM.
I have learned several valuable lessons in the ROM upgrade process. This was on an advantage 7501, unlocked, USA version. I did the upgrade the process with the OliPro 3.0 unlocker, the PK Rom 3.0 and vista pro (32bit):
- Make sure that you have NOT customized your athena/advantage beyond the basic calibration and cut/paste walkthrough.
-Download ONLY THE MOST RECENT VERSION OF THE OLIPRO UNLOCKER. CHECK TWICE TO MAKE SURE THAT YOU HAVE THE LATEST.
-You MUST let step one of the Unlock complete. With the latest version this will make a bricked Advantage practically impossible.
-Go through step 2 & 3 even if you don't think you need this. It will upgrade the radio and give you peace of mind if you are updating to the PK rom.
-Don't panic if you complete step 1 and goof step 2/3. You can recover. But if you screw up the initial SPL unlock in step1...it is not going to be pretty.
Hope this helps!
Thanks for everyones advice!
-Alex-
Hey, i tried to install android on my HD2 several times and failed, but then i noticed i had wrong version of hspl so i couldn't start MAGLRD (i had 3.03 i think i should've had 2.08 right?) Anyway i then tried to remove the HSPL by formatting my sd card and putting the file from original rom (i don't remember the name) and renaming it to LEOIMG, it started installing the rom i went to another room, when i came back it had finished and was on the red/blue/green screen and it said update failed and i had to retry, but now none of the exes work like rom updates or task29 nothing. when i turn on the phone it says "Not allow" and then goes to the red/blue/green screen. Please help me, I'm freaking out is there any way to fix it? Is there even a way to access SD card when the phone does this?
TomaToz, use the computer to flash via USB cable.
I can't, none of the rom updates or ANYTHING works since this, they all give errors
go to the magLDR page and look for how to remove it.
then start from scratch
There's no info how to remove it but even if there was how would i? None of the exes work and i can't turn the phone on, also i dont think MAGLRD got installed cause i had HSPL 3.03 instead of 2.08
Come on isn't htere anyone who ca help me? :|
are you sure you haven't bricked your phone?
because it just seems you did :/
I don't think you read the bold "You need HardSPL 2.08 before installation!" just above the history?
anyway, can you not flash a radio via USB as well?
also, if you post the error messages you get maybe we can help you more.
you can also check here:
http://forum.xda-developers.com/showthread.php?p=10275463
What does bricked mean? :9
and no i can not flash radio or anything else, i'll edit this message with a picture of what the error message looks like
EDIT: WOW, i tried to run the hspl installation and installed hspl 2.08 successfully, not i turned my phone on and its the screen where you choose to start the update for rom. This is the update after which my hd2 said "Update failed" so I'm scared to take any steps, please respond and tell me what to do
HOLY FREAKING CRAP! I installed android and everything seems to work fine, i can't tell you how relieved i am :]]]]
That's for your attention
Does anyone know where to get apps for Android 2.3.2?
What i installed is TyphooN_CM7_v3.5.9-MAGLDR
Help please!!! Hd2 stuck !
HI to all!my phone was working great until i decided to try a new rom so I installed task29 (i had elegancia rom but i wanted to try another rom)and now im stuck on the htc logo screen that says 'stick together' in a red square.....i tried vol down+power button to go into bootloader but nothing happens, then i tried to hard reset but still nothing happens...i pushed the reset button and i did it all over again at least 3 times but still nothing... is there anything else i can try? (even on the hardware?)
my HD2 is a T-MOBILE usa with :
radio 2.08.50.08_2
2.08.HSPL
3.14.531.1 elegancia rom(http://forum.xda-developers.com/showthread.php?t=651729)
i love my hd2 and i want it back...PLEASE HELP!!!!!!!
THANK YOU in advance!!!
sofialoca, task29 is not a thing to be "installed". It's a flash formatting. So you did everything correctly and deleted all from your phone except.. hmmm... stick together.
To flash other rom - just press Volume Down and push reset (under the battery cover) KEEPING VOLUME DOWN PRESSED. Keep it pressed until you are again in bootloader mode. Then connect USB and flash whatever you want.
thank you Andrew!I found the problem...
AndrewSh said:
sofialoca, task29 is not a thing to be "installed". It's a flash formatting. So you did everything correctly and deleted all from your phone except.. hmmm... stick together.
To flash other rom - just press Volume Down and push reset (under the battery cover) KEEPING VOLUME DOWN PRESSED. Keep it pressed until you are again in bootloader mode. Then connect USB and flash whatever you want.
Click to expand...
Click to collapse
thank you so much for the quick response! the problem was with my volume down button...i opened up the phone and moved the flex ribbon a bit to get it into place .after that it got in bootloader mode succesfully!im now back with elegancia and never gonna change it...i think i got a little greedy...afterall elegancia rom is great!thank you Miri and Steve0007 for this great rom and thank you again Andrew!
TomaToz said:
HOLY FREAKING CRAP! I installed android and everything seems to work fine, i can't tell you how relieved i am :]]]]
That's for your attention
Click to expand...
Click to collapse
glad it worked out in the end