Guys,
I have been trying to find solution on forum, but it seems it will not be so easy ... My MDA1 shows only Wilkommen bei TMobile and soft version G32S54, R3.23.00, 3.16.45 and that is all It does not response on power or anything - it simply shows me Wilkommen or not (if power is unplugged and battery empty). You may see how it looks here: http://www.jester.it.pl/mda/MDA1.jpg I have only USB cable - so if there is any chance to solve this problem having only this cable - please show me the way.
What is the most important - my Active Sync does not see connection ((
Help ...
TIA
B
I think your ROM is corrupt. Try reflashing.
Instructions can be found here:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
Hi there,
Thanks for your help - right now I need to find appriopiate ROM Image and it should work...
BR,
B
It seems that I do not have ROM file ;((( and one I found does not work....
Any suggestions?
I will try to cook sth. and let you know
a problem I had
When I first tried to image my device, the usb flash mode using XDA tools didn't work. I think this was because I was using windows vista. Anyway this forced me to use the direct sd flash method, and thus I didn't get the instructions to cold reset my device after the flash, which does seem to make a difference. Have you tried that?
<edit>What do you mean it does not work? What happened exactly when you tried?</edit>
OK - first time did not work, because Hard reset did not worked My mistake ... after reset it seems fine - I made some cooking and I have nice ROM right now but... After another reset and after second upload Boot appears and Wallaby starts making tests. After last test made Diagnostics screen appears and to be honest I do not know what to do Hard reset just shuts down MDA and I cannot switch it on - I can start from the same begining - tests etc. I know I am really close to solve that ... and we will see.
Guys, thanks for your help
Related
Hey everyone,
Can anyone help me fix this big problem.
I downloaded a update ROM from (http://www.xda-developers.com/incoming/rom160wwe/) with the name RUU16006WWE_T-mobile_NL.exe.
After trying to upgrading my device, the proces stopped and told me that there was a connection problem. After this, a tryed to re-connect my device to my computer and to finish the upgrade bud nothing happend and stil nothing happens. My T-mobile MDA is not responding to anything. And i can't connect to ActiveSync. The only thing that my mda shows is this (click on the picture too enlarge).
So ones again. HELP me PLEASSSS..... Send any comments to [email protected]
I hoop my Mda can be fix cause it cost me alot.
Don't panic Your device is in bootloader mode.
Just reset the device, place it back in the cradle and re-run the upgrade. It doesn't require ActiveSync as the upgrade process looks after its own connection.
Make sure the cradle is connected directly into a USB port on your PC and not to a hub. Also make sure the power supply is connected to the cradle.
Thanks for the fast replay bud....
Can you give me a specific step by step to do it the right way? I m not verry good in this kind of things... Thx anywhy
For the moment, hopefully, all you need to do is what I said above. Re-running the upgrade should work OK (although it may depend on what version ROM you had installed already). Give it a try and see what happens.
Wel it keeping telling me that RAPI.dll is missing. Even when i have downloaded RAPI.dll.
I had version 1.60 i think.
Do you no where i can download the version that i had?
Try re-installing Activesync. The latest version is 3.7.1 Build 4034.
You can get it from here: http://www.microsoft.com/downloads/...7c-ca96-48b4-b5d4-f3e047ca5108&DisplayLang=en
OK thx i wil try that...
I have stil a problem.
Where can i download the ROM version 1.60.00WWE? Cause i'm upgrading with 1.66 bud it showed an error
The same error? And at what point does it happen?
Also, please confirm which ROM you are trying to upgrade with, as you have stated two different versions so far.
dcs i'm sorry you're right.
Well, i'm now upgrading from nothing (it showed what ROM i currently have, nothing) to 1.60.06WWE. I download it from http://www.xda-developers.com/incoming/rom160wwe/ as i sad before. It has the name RUU16006WWE_T-mobile_NL.exe
reply for more info.
OK. So what is the current situation? Are you still having a problem? If so, what are the details and exactly when does it occur?
Yes, i still got some problems. One of the many is dat after a few min. or so later, the proces stops and i get an error. I have to do a soft reset and start the proces again. So i did.
Bud now i can't connect anymore. What you see below is what i constantly get to see. And it wil do nothing.
How long have you waited with that message displayed? It can sometimes take a while to get started properly. At that time can you see what is displayed on the device?
The picture that i just showed you, i get that immediatly after pushing next in the beginning field.
When the display (see picture) is shown, the display of my device is blank. There is nothing, no words.
OK. Just be to be sure. Put the device in boot loader mode by pressing and holding the jog button (bottom centre of device) and the power button at the same time and press reset button. This should show the bootloader screen with (in your case) Serial V1.03 displayed. Put the device in the cradle and it should say USB V1.03. Then restart the upgrade. When the initial screen displays on the PC click next and the screen you posted above will display while the PC handshakes with the device. Give this some time to complete. If all is well it will progress to the screen showing the versions, etc. and allow upgrade. Click upgrade and again it will show the screen you posted above for a while then (hopefully) continue.
I'm now bizzy with what you sad. 10min. so far.
10 Minutes with the display you posted above? If so then that is too long
Yes exacly... TOO long... i don't no what to do now.. anyways. I'm going to sleep now. I wanna thank you for everything.. I'll hope to speek too you tomorrow. Bye bye
OK. Sorry we couldn't get it sorted tonight . If I think of anything else I'll let you know.
Another thought came to me. Some people who have had this sort of problem found that using a different USB port or even another PC solved the problem.
i donwloaded something and putted it on my xda II, now it says serial and at the bottom vl.01 i can't use it it's tottaly black no hard reset works, HELP!
euh i really need uyrgent help i can't connect to theactive sync either, i just downloaded the new windows to my device clicked on something and then it went off and only black letters serial and v1.0. it's not my xda so HELP HELP HELP
don't panic...
you are in bootloader mode.
you've probably executed 'enterbl.exe', which is a part of every upgrade.
just connect your device with your pc and run normal upgrade/flash procedure.
buzz
but i can't use active sync anymyore, i unzipped the thing i downloaded and now it got 7 options to choose from but when i click it it opens a install program and in big red letters ROM IMAGE FILE NOT FOUND
it also says
the pocket pc software update cannot locate the ROM image file to update to your pocket pc. Download the correct rom update for your pocket pc and try again and i am a real noob in these thing
did you try a hard reset?
press the on/off button and the softreset button at the same time.
if that wont work
http://forum.xda-developers.com/viewtopic.php?t=18287
try putting that rom on your phone and dont forget to change the country id as described.
good luck friend!
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
bram said:
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
Click to expand...
Click to collapse
if you understand my english thats ok.
i completly understand german but im not so good in speaking it.
normaly we can only speak english here but we can make an exeption so you can speak german to me and i will speak english back. OK? or try the translator (www.freetranslation.com)
did you perform the hardreset?
activesync won't work aslong as serial is replaced by the word usb when in the cradle it's ok carry on with the upgrade
try another pc to upgrade!
thats happen to me too.. but...
i also try to install the downloaded items from this website (which is the new windows version 2003 SE), and soon after i start installing it, my desktop computer says "error has occure during the installation process".
:shock: i was very shocked when i see my device completely blank with a word says "USB (on the top)" and "Ver. 1.03 (on the bottom)".. i really panic beacuse my active sync doesn't worked.. but then i start to hard reset my xda then reconnect my device and try to install it several times (bercause sometimes the error message still appear..) after waiting for 5 step of installation which takes abaout 2 hours
tadaaaaaaa now i have an XDA IIs application on my phone...
So in conclusion:
1. do't be panic :wink:
2. try to hard reset ur device
3. reconnect ur device (even if the activesync won't recognized ur device)
4. Install the downloaded files..
5. wait until ur computer says "deleting extended rom" (or something like that)
6. be patient..
7. Pray to GOD..
8. and here you go you got new look for ur beloved xda.
good luck..
oh it works!!!!
there are no words for it and the landscape and the themes, it's BEAUTIFULL!! thanks alot everyone!!!!!!
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
pleeeeeaaase read/search the forum i know its fustrating when your phone apears to be dead but there are about 100000 topics about this problem and about 100000 times the solution!
greetings OMEGA_ReD
Hi
Can any one help to recovery my sx56 which i screwed up in trying to install linux from xanduax home page. I tried to recover, but i don't see any display on the screen. i did a reset and did a test on device, all test says successfull. Looks like the way i recovered is not correct. Now i dont even remember that how i did, because i did some many different way by reading some many posts on the google. Please let me know if any encoutered this situation.
Advance thanks.
good read
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
rom image
thanks for reply, where do i get the rom image.
i downloaded rom from below link http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
and followed all the steps as in the instructions. i dont see any display after the cold reset, but i can sync with my active sync and i can hear the startup sound in the background when i did cold reset. please let me know if i missed any steps.
thanks
Re: rom image
srujang said:
thanks for reply, where do i get the rom image.
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=ROMVersions
or http://www.romkitchen.de
Stefan
i downloaded rom from below link http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
and followed all the steps as in the instructions. i dont see any display after the cold reset, but i can sync with my active sync and i can hear the startup sound in the background when i did cold reset. there is no display after the recovery, please let me know if i missed any steps or need to any additional step to see the display.
Looks more like an harware error...
Stefan
i did a harware test with hard reset and did a autotest on hardware, it shows all test are ok.
I had the same problem as srujang. I installed a new ROM and it's working fine now.
mutho
can you send me the instructions and new rom link from where you downloaded and installed.
thanks.
srujan
WARNING 001: POWER ADAPTER NOT PLUGGED IN
I tried to install with new rom version which downloaded from the stefan's recomended link, it give me error saying that "WARNING 001: POWER ADAPTER NOT PLUGGED IN" and Please plug the power adapter into your Pocket PC and exits out. But the plug was in the socket, i didn't understand why it says plug in the power adapter. Please let me know if any one encountered this type of error.
Thanks in advance
Hi Mods and all
I am new in this forum .... and new with PDA in general ,.. although i have experience in regular cell phones ,,,
I have come up with an issue that i need help with from you guys who seem to be experts...
I have an XDA Atom which turns on upto O2 screen and freezez right there .. i tried to hard reset the phone but failed..
When i press power on and reset button .. screen asks me to press green and red key when i do it says clean boot .. and than do u want to reset your phone ? and than after that i tried to press all keys but nothing happens ,,,
I dont know wht is the problem but i think or assume that i have lost bootloader and or Rom ,,, Please help with this part
Also what tools do i use to flash what i have to flash as the PDA cannot connect with the USB becuase it is not turning on ,,, Please help with this part
Also what do i need to flash to this phone to revive it ,,,? please help with this issue ,, and where can ii download this files ,,
please explain step by step and or direct me to a link where i can geet this information
thank u in advance ,,,
Mike
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Drat. Got to this one too late. Sorry
Anyways, the Atom does have the tendency to lose track of its own extended ROM (You can actually see this happening if you use the WM5 hidden storage revealer - which ironically happens to cause the problem sometimes as well).
Symptoms include:
- A phracking long boot time (>7 minutes, seems to hang)
- Screen goes out of alignment
- Camera, Autoconfig, Equalizer don't work.
- Hard reset doesn't help.
- EXTROM info is missing from device settings (shows as blank) - tho sometimes the device works without this anyhoo.
- CMOS version is also missing (the device definitely won't work in this case)
Probable cause:
- Someone or something just tried to write to your hidden storage root. (Eh?)
Far as I know there's no method to recover other than flashing your phone again. Just one of the design flaws of the Atom, I guess...
(Yes, I feel for you. I had to solve this myself too, and I didn't want to send it in. Thankfully, this isn't a common problem. )
I've just downloaded the latest Rom from seeo2.com hongkong and I had the very same problem.
My XDA Atom Exec is frozen at the O2 screen.
mun66, if you read this, could you explain how you fixed it?
thanks.
mun66 said:
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Click to expand...
Click to collapse
would you plz tell here which rom u used for this ????????
Well, my Atom Exec will do the same sometimes.
But the following method works everytime!!!
Take out the battery. Charge it with a charger until full !!!!
Put it back to the machine, it works every time !!!
Or you may try just charge it in the machine for a few hours and see if that works. Since I always have a spare battery charged, every time that dumb thing stuck, I just changed the battery and it waked up again.
mun66 said:
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Click to expand...
Click to collapse
Hi mun66;
I've got the same problem with my Atom. But I dont know how to flash the phone like what you mentioned. Could you plz show me step by step??
Thanks,
Your ATOM Exec
edunon said:
I've just downloaded the latest Rom from seeo2.com hongkong and I had the very same problem.
My XDA Atom Exec is frozen at the O2 screen.
mun66, if you read this, could you explain how you fixed it?
thanks.
Click to expand...
Click to collapse
You guys just need to go into bootloader mode before performing an upgrade. For the XDA Atom just press Power+Dpad(center)+stylus reset momentarily, and its now in bootloader mode. RUN again the Update program. If you still experience the same thing, the update file you downloaded might be corrupted. You have to download again and flash your device again.
Mine is still stucked in O2 though done all of the above ways,
got the new ROM and flash it, but still stuck in it.
PLS HELP ME GUYS!!!
wilak81 said:
Mine is still stucked in O2 though done all of the above ways,
got the new ROM and flash it, but still stuck in it.
PLS HELP ME GUYS!!!
Click to expand...
Click to collapse
You might want to send it in the the service centre for a check, just in case it's a hardware problem.. If you still face the same issue even without installing any software..
That's probably a good idea, but i'd like to try some tricks on many threads before.
And also I've heard that O2 service center are not cool
wilak81 said:
That's probably a good idea, but i'd like to try some tricks on many threads before.
And also I've heard that O2 service center are not cool
Click to expand...
Click to collapse
Do keep us posted..
I will face the same problem if i install too much programs.. I guess it's either Pocket Plus, Diary 2 which is causing my problem.. Now wondering if i should change to Atom Life, since they announce WM6... If only there's a perfect phone.
Thank God, it's working after 5x flashing but it still had bug.
I still have to take the battery off for at least 15 minutes if I try to reset the Atom.
Sure 1 thing for ATOM, IT SU**S!!!
i have a friend also has a trouble like this ,but he has solved the problem when he charged the exec. do not you have a try ?
I just picked up one of these to play with.
Mine gets by the O2 screen but if I have a few apps on it it loads the Today screen but then freezes and won't let me access anything either by hard key or screen. Soft reset just repeats the cycle.
This is with only around 4 apps loaded. One of them must be a culprit?
By the way, it came shipped with WM6.0 (ROM: WWE_RC2170507B2).
Hi all
I know that there's millions of threads about this but believe me I've read them all and nothing seems to work for me.
I'm trying to upload a new room in my prophet but as soon as the mobile reboot nothing else happens. I've got a black screen and nothing else.
I've tried all the key combinations to reach the bootloader I even tried to run bootloader.exe directly from the mobile but nothing.
At this moment I'm pretty stuck with the room I've got and I really want to change it , any advice ?
I've tried:
camera+softreset
Commanager+softreset
in both cases I kept press the camera and commanager botton .
I've also tried other combination but without the behaviour expected.
Thanks in advance
Look forward your reply
All the best
Pedro
Turn the device on, whilst it is booting try holding the comm manager button and do a soft reset.
Try performing a hard reset (hold BOTH the camera and the comm manager buttons and soft reset), to see if you get text displayed. Don't bother actually doing one.
What ROM do you have at the moment? Have you tried unlocking (sim) your device? Have you used hardSPL or SoftSPL? What numbers are shown after the device boots up (red text in the top left of the screen)?
I´m using Shadow_My_Edition_2_no_DualSIM.
I've used HardSPL
ipl 2.9.000.1
spl 2.g4.4pda
gsm 02.47.21
os 5.2.20.21
I've started facing this issue only after this room has been uploaded, other odd thing that my prophet is doing is that the prophet only reboot if it is connected to the usb port in my laptop or to the charger directly, otherwise it enters in a continuous reboot.
I'm trying to get rid of this room but I'm not able to ....
maybe solution
http://forum.xda-developers.com/showthread.php?t=292667
try my solution for that kind of problems connect it to charger as described and then do a flash of a basic rom.
possibly u flashed a wong rom
Hi
That was a great solution, fortunately I there was no need to get so far .
Guess what I've changed the USB cable and the flashing procedure went as expected.
It´s kind of strange the behavior that my was getting but now I'm track again , ready to flash and test some rooms.
Thanks all for your replies.
BR
Pedro