Okay, this forum is my life line and I have always found everything I have looked for . I might be overlooking what I am looking for, but I have look long and hard.
I am finally connected to the internet with the settings posted everywhere. My problem come when I am trying to configure my IMAP4 mailbox.
I get "unable to connect with current settings. To change your connection settings, tab settings."
I am at a loss! Help!
Happy New Year!
im having the same problems.. did u ever figure it out??
Related
hey guys heres abit of unusal question? (to be honest i dont think any of us ask any usual questions )
anyway what im trying to do is find out if there is a way to force a pda when its trying to connect to the internet to first check if internet is avaible through active sync (cradle or usb cable) then to check if WIFI is avaible then if thats not avaible to use gprs - but to use gprs as a last resort.
so the way it will work is an application needs to connect to the internet it first is forced to check for a connection through active sync if thats not avaible then to see if there can be a wifi conenction established if that fails then to connect to gprs and in the order.
i was hoping i could find what scrpits are used when the connections are established and then make a script to run the will force the device to do this.
Or even if there is a reg edit that I can do that will allow me to get this done? (would regedits be possable for this)
Id appericate your thoughts on this guys?
p.s il also go post this in the genaral networking section of the forum, as i would like to do this across board on any device (wm5/wm6)
well- i can solve half that...
you don't need a script or anything for the cradle side of things- just set activesync's Connections (File->Connection Settings->) and Uncheck "allow wireless connection on device when connected to desktop"
This wil force the device to use the activesync connection for the data.
Now- if only we could make it do that on wifi...
For what it's worth- I use NoData whenever I'm home and using my Wifi connection. It's a minor step to make sure I'm not burning up the data dollars- and the wifi is fast as heck.
dude thanks for the reply lol loveeeeee that cat you got one bad ass *****!
yeh i know about the active sync side of things,
I know it sounds silly and "why do you want to do that" kind of a question,
but im going to be supporting alot of devices and having something preform this task in that order would be a great help to me.
I dont think il get the answer for it, but hey this is XDA DEVEPLOERS!!!!!!
and mighter things have been done on this website by the users!!!!!
peace out
Hi!
After reading a little bit through the other posts I know that I'm not the only one with this problem.
Active Sync via usb is still not working in touch IX. I directly sync with an Exchange server which works perfectly over wireless lan, but when I connect my phone to usb, after a few seconds I get the message (On the phone and in the AS log):
"Cannot connect with current connection settings. To check your connection settings, select Start, then Settings, then Connections."
The funny thing is that I'm able to ping the phone and have full access to the filesystem with the WindowsExplorer, so there realy is a connection established.
I think there is missing a little setting in the phone. I tried to disable the "advanced network functionality" but still no success.
Would be very great if someone could find a solution or we can figure out together what changed between VIII and IX.
Workaround/Solution
After playing around a little bit I found a solution that works, but not why.
After changing the default connections to "My Work Network" is worked!
Go to
Start->Settings->Connections->Connections->Advanced->Select Networks
and select "My Work Network" for both connections.
I have no time left to figure out the difference between "My ISP" and "My Work Network", maybe I'll try this later or someone else could do this
EgonLebt said:
After playing around a little bit I found a solution that works, but not why.
After changing the default connections to "My Work Network" is worked!
Go to
Start->Settings->Connections->Connections->Advanced->Select Networks
and select "My Work Network" for both connections.
I have no time left to figure out the difference between "My ISP" and "My Work Network", maybe I'll try this later or someone else could do this
Click to expand...
Click to collapse
change the topic you are misguiding ,should be "Active Sync and touch IX via usb" is still not working on bluetooth where do this gets discussed then for bluetooth.
you're right, corrected it!
But by the way for me it seems like the root problem could be nearly the same.
I'm hoping that maybe gullum could find the real problem. This would be very fine!
Go and search for USB-Switch.
I found it some months ago and it worked great at WM5. Maybe it works at WM6 too. I got the same problem but I got stuck after step 1 when flashing to WM6/Gullum IX (see my other post).
All USB-Switch does is to switch between RNDIS and serial I think.Maybe this helps.
holydiver
I tried looking on the forum but cant seem to find out why facebook and apps cant access the net.
it says make sure your connected to the internet, but the internet works fine i can browse websites with no hassles.
known problem is facebook, kevtris score update neither work i cant seem to find any others at this present time, emails too now!!
im running touch pro with energy rom
can someone please help me
thankyou
lee
ok emails says cannot syncronize then notification box comes up at the top saying cannot connect with current connection settings :S I have used the connection setup thing to tmobile uk but still no luck
ok i found the problem, its the proxy connection settings, the connection wizard puts in a proxy ip address for tmobile. untick the proxy server box and viola sorted.
Worth bearing in mind if you are using a unlocked touch pro on tmobile pay and go.
thanks peeps
Hey guys,
First of all, I am new to the forum, but I have been reading it thus far. Now, I have a problem that I cannot solve. I did not find anything related with the problem I have. I need your advises and help.
I recently bought an Atrix 4g and trying to figure it out. I configured Apn connection and installed a software called 'apn on-off' to be able to disable or enable my internet. It works well, however, after enabling it, it takes so long/forever to connect the edge connection again. So I am not able to do anything online since it does not connect, or I must await a long time for it to connect again. Why am I having this problem?
Also, is there any way to manually update my programs such as weather and facebook, instead of waiting for them to automatically update themselves, which I don't want to ?
Lastly, when it connects to edge or wifi, all programs update themselves. It is annoying to me. I would like to use my internet manually, as I want it to connect whenever I want to use or click 'update', instead of connecting automatically, which is arbitrary. Is it possible? I miss my old HTC in this respect
Thanks in advance
I bought my first smartphone ever last month to give you an idea how new I am. My last phone was a Touch that I had set up to allow tethering... but I had to upgrade my phone. I need my tethering back, and I prefer not going through a program like pda-net.
So, I read that if I root the phone, I'd have tethering back. I used Revolutionary. I backed up my phone. I installed clockwork and superuser. I think I did everything I'm supposed to do. However, when I plug the phone in (I prefer USB tethering) and click the "Internet Connection Mode", I still get the message I need to subscribe for $20 a month, and I don't get a connection. Do I need to do something else to enable wired tethering? Do I have to install a 3rd party program as well? Or is it that I haven't installed a custom ROM/Kernel/Radio/Whatever would be the right thing?
The phone is a Thunderbolt. HTC Sense 2.1, Software #2.11.605.5, Android version 2.3.4.
I really don't have much of an idea what I'm talking about, so if anyone has any fairly easy answers, it would be greatly appreciated. Thanks for any help.
Find my WiFi tether thread and follow instructions
Sent from my ADR6400L using XDA App
Do what lantern says. Just rooting does not unlock the built in internet sharing apps. You need to get the apps that do what you want now. I.e. wireless tether, you might like wired but wireless is very nice.
Sent from the nearest cellular tower.
Grnlantern79,
Well, I've tried following your instructions on the other thread. I downloaded the .apk you had listed.
That took me an hour to figure out how to install... didn't know I needed to install another program to install something from a memory card.
As for these instructions:
"Mine did not work until I changed the device profile to Thunderbolt in settings.
Then I changed a few other settings such as
Force WiFi driver reloading (check) *has worked for some*
Routing fix (check) *most important one*
Disable wake-lock (unchecked) -> *this is why you lose connection after your screen turns off*"
I can't for the life of me find where any of these are. I've spent a good amount of time trying to find them, and just can't seem to find a settings section.
Then I tried Autotethering and WiFi Tether from the Market. It doesn't matter which I use, when I hit "Internet Connection Mode" the Verizon $20 to use message pops up. I tried on two computers, and both will see something there, but not connect to the internet. I tried connecting without selecting that, but it still didn't work (had it on "charge only").
I'm very frustrated... I've spent hours working on this and don't feel like I'm making any progress. I appreciate you attempting to help via that other thread, but I'm lost. If you have any way of giving me a more detailed explanation of how to get this to work, I would greatly appreciate it.
If I just install some new ROM and not work off the rooted stock one I have, would they come with the tethering block from Verizon disabled?
Thanks for any advice.
Telaeus
When you open WiFi tether press menu the soft key at bottom of your phone, the settings will pop up.
Device profile = thunderbolt
Routing fix = check box
Enable access control
Now I can tell you are not tech savy so this is where my help stops. If you can't find the settings in a program after an hour, you should think about return your smart phone for a feature phone.
Sent from my ADR6400L using XDA App
Well, thanks for trying to help then Grnlantern79. I had misunderstood where to look for the settings. Figured it was settings on the phone itself I was changing to bypass the Verizon Internet Connection thing.
I changed all the settings in WiFi tether. Still no luck. The computer recognizes the network... I set it to Public. It's listed as HTC Remote NDIS Based Device. However, there is no Internet or Network access. I'm not putting it to "internet connection mode" since the Verizon popup has never gone away... leaving it on Charge only.
If anyone else is willing to try and assist me, I would appreciate it. I fully admit to not being smartphone savvy. However, I'm not incapable as Lantern implies... I've built my own computers since 1993, and can diagnose and do pretty much anything hardware related. Unfortunately, smartphones are different, and I'm still getting up to speed on all the terminology and uses of them.
So, thanks Lantern... but is anyone else able to figure out why this isn't working?
Thanks for any help.
Enable access control
Check
WiFi driver reload
Routing fix
Uncheck
Disable wake lock
Setup-method
Apple computer
Wext
Any other
softtap
Set computer profile to home network.
When u connect to ur phone it wireless not usb, ur phone will have a notification asking if its ok to connect, hit enable. Done.
Sent from my ADR6400L using XDA App