Hi!
After reading a little bit through the other posts I know that I'm not the only one with this problem.
Active Sync via usb is still not working in touch IX. I directly sync with an Exchange server which works perfectly over wireless lan, but when I connect my phone to usb, after a few seconds I get the message (On the phone and in the AS log):
"Cannot connect with current connection settings. To check your connection settings, select Start, then Settings, then Connections."
The funny thing is that I'm able to ping the phone and have full access to the filesystem with the WindowsExplorer, so there realy is a connection established.
I think there is missing a little setting in the phone. I tried to disable the "advanced network functionality" but still no success.
Would be very great if someone could find a solution or we can figure out together what changed between VIII and IX.
Workaround/Solution
After playing around a little bit I found a solution that works, but not why.
After changing the default connections to "My Work Network" is worked!
Go to
Start->Settings->Connections->Connections->Advanced->Select Networks
and select "My Work Network" for both connections.
I have no time left to figure out the difference between "My ISP" and "My Work Network", maybe I'll try this later or someone else could do this
EgonLebt said:
After playing around a little bit I found a solution that works, but not why.
After changing the default connections to "My Work Network" is worked!
Go to
Start->Settings->Connections->Connections->Advanced->Select Networks
and select "My Work Network" for both connections.
I have no time left to figure out the difference between "My ISP" and "My Work Network", maybe I'll try this later or someone else could do this
Click to expand...
Click to collapse
change the topic you are misguiding ,should be "Active Sync and touch IX via usb" is still not working on bluetooth where do this gets discussed then for bluetooth.
you're right, corrected it!
But by the way for me it seems like the root problem could be nearly the same.
I'm hoping that maybe gullum could find the real problem. This would be very fine!
Go and search for USB-Switch.
I found it some months ago and it worked great at WM5. Maybe it works at WM6 too. I got the same problem but I got stuck after step 1 when flashing to WM6/Gullum IX (see my other post).
All USB-Switch does is to switch between RNDIS and serial I think.Maybe this helps.
holydiver
Related
Dear guys could some one try to explain me how configure my TC500(S200)??
i just update from WM6 but I don't know how configure to WiFi.
Thanks
Ema
turn on wifi via comm manager
goto settings -> connections
click on "wifi" or "network cards"
select your access point and enter in your info.
it doesn't switch on
When i click on comm manager the wifi doesn't come in blue color and it remain with a x after try to change.Bluetooth works propely,it's connect with my holux gps antenna....How could I do for to enable the wifi???
Thanks
Another things is that when I go in connections,will be appear:
Ad new connection
or
My company name
Add a new modem connection
Add a new VPN server connection
Set up my proxy serve.
If wifi isn't turning on, I can't help you there. maybe it's broken. who knows...
what rom you are use? some wm6 roms make troubles ... please read all entrys in the threads about your used rom!
I WiFi some times works and some times don't work like a bluetooth,and all connections go right!!!But i have to resolve still a problem.The file Init_tray olweys not opened.And I have the problem with contact,I can never found a contact!!!And when I add a contact in touch cube don't happen nothing!!!!What I can do???
I'm using Fantastic Mobiz v2.0b4 from
Fantastic b4 (Official) Step 1
http://www.badongo.com/file/3633747
and step 2,another problem is it activesync doesn't syncronise never.
So just three problem:
1_bluetooth and Wifi work saltuary
2_Contacts never work.
3_Activesync doesn't syncronise
n.racing said:
and step 2,another problem is it activesync doesn't syncronise never.
So just three problem:
1_bluetooth and Wifi work saltuary
2_Contacts never work.
3_Activesync doesn't syncronise
Click to expand...
Click to collapse
did you do a propper hard reset?
press camera and commanager button and put the stylus in the smal hole beside the usb port hold this something is displayed on the screen and then press the green phone button.
Green button???Wasn't commander+camera+reset only??
Yes Idid it more then one times,but when start always appear init_tray. can not be opened..So sad...Some other possibility?
Hey
I have an Ameo; running AP4 and radio version 1.50
I can turn on wireless and it says wireless is available however thats it, i cant connect to anything nor use MSN or anything like that.
So i played around with it. I seen within some setting (network cards i think) that i had 2 wireless showing saying 'available' so i clicked connect and it said 'connecting' and then goes back to avilable and after a few attempts, unavilable.
My wifi is not secured, anyone can connect. Any help appreciated
Now as for the AP4 question when i turn my ameo around, the screen layout switches how can i turn the automated switch off ?
thanks
chris reilly said:
Now as for the AP4 question when i turn my ameo around, the screen layout switches how can i turn the automated switch off ?
thanks
Click to expand...
Click to collapse
Try reading the AP4 thread!
chris reilly said:
Hey
I have an Ameo; running AP4 and radio version 1.50
I can turn on wireless and it says wireless is available however thats it, i cant connect to anything nor use MSN or anything like that.
So i played around with it. I seen within some setting (network cards i think) that i had 2 wireless showing saying 'available' so i clicked connect and it said 'connecting' and then goes back to avilable and after a few attempts, unavilable.
My wifi is not secured, anyone can connect. Any help appreciated
thanks
Click to expand...
Click to collapse
Start, settings, connections, wifi, network adaptors tab.
Under 'My network card connects to' ensure it says 'The Internet' and not 'Work'.
I flashed the AP4 ROM on T-Mobile Ameo. There is no chance to start Wireless. There is only a WLAN-Ícon but no WIFI-Icon
but without this the AP4 Rom is very great...
Thomas
Try reading the AP4 thread!
Okay, i read it and i see to run off the automated screen orintation i need VO.exe from windows which i have found, but i cant paste it anywhere, i aint sure how to assign it to anything like launcher and i cant open it directly from windows
please help
as for the wireless problem, i will get on to checkin that
Pantaloonie said:
Start, settings, connections, wifi, network adaptors tab.
Under 'My network card connects to' ensure it says 'The Internet' and not 'Work'.
Click to expand...
Click to collapse
yes. U r right
and I made some pic
http://morries0811.spaces.live.com/blog/cns!9421367FF6994879!1173.entry
Hi Baby1111,
This ist not the solution for most of the Wifi-Problems i think. In my case the Symbol wich looks like WIFI ist named "Network Card". If I change to Internet instead of work nothing changes. WIFI does not turn on.
I saw the name of device in Bootloader ist ATHE400
Here my bootloader Information in the red bar:
ATHE400
IPL-v1.00
ATHE400 MFG
SPL-v3.50.OliNex
maybe this can be a problem, before i think ist was ATHE100. Also the TOMTOM 6 requests a new activation so somthing seems to be changed with the IMEI or so.
by reading the forum there if found 3 Cases for solution:
1. this one Change from Work to Internet ->> No scuccess in my situation
2. disable the automatic screen orientation ->> no complete Instruction how to do this or i can not understand it.
3. Sent the MAC-Adress of the device to Senior users like OLIPRO and get a file to change. ->> I dont know if they are glad to get much support requests.
I hope there will be a fix wich i can do by myself without disturbing the gurus at there great work.
Thomas
Thomas
@ Bit117 and Baby111
I can assist you if your WiFi did not properly configure during the flashing of AP4 instead of Olipro and cmonex (Olinex) who we'd like to have working on higher issues.
Send me a PM with your original MAC address and an e-mail address where I can send you a custom file configured to your device. I will also send detailed step-by-step instructions to fix your device. You will need to use MTTY so if you don't have that, find it in the wiki.
Regards,
Raskell
p.s. - If you do not know your original MAC address, check inside your battery door. On some models it is listed there (not the same as IMEI). Others have reported that flashing back to the modified AP3 gives a working Wifi. If this is so for you, get your MAC address from there and reflash to AP4, sending me the MAC info and we'll get you working!
Pantaloonie said:
Start, settings, connections, wifi, network adaptors tab.
Under 'My network card connects to' ensure it says 'The Internet' and not 'Work'.
Click to expand...
Click to collapse
Yes, this is obviously not a fix for those whose wifi will not turn on.
But I've come across a few people who think their wifi is not working because this setting is wrong, and when I installed AP4 it set it to 'Work' by default.
chris reilly said:
Hey
I have an Ameo; running AP4 and radio version 1.50
I can turn on wireless and it says wireless is available however thats it, i cant connect to anything nor use MSN or anything like that.
So i played around with it. I seen within some setting (network cards i think) that i had 2 wireless showing saying 'available' so i clicked connect and it said 'connecting' and then goes back to avilable and after a few attempts, unavilable.
My wifi is not secured, anyone can connect. Any help appreciated
Now as for the AP4 question when i turn my ameo around, the screen layout switches how can i turn the automated switch off ?
thanks
Click to expand...
Click to collapse
Hi
I had the same problem, But sorted with a Hard reset. After the hard reset it connects first time.
Good luck
Hey,
I tried multiple hard and soft resets; no luck. I have an open network now with full signal.
I have tried with no sim card, 3g sim card and an o2 sim card. No Luck
Please help.
As for screen auto orientation, sorted that
chris reilly said:
Hey,
I tried multiple hard and soft resets; no luck. I have an open network now with full signal.
I have tried with no sim card, 3g sim card and an o2 sim card. No Luck
Please help.
As for screen auto orientation, sorted that
Click to expand...
Click to collapse
I would re-flash the 1.50 or change to 1.57 radio, if I were you.
I’ve tried out all wireless with 1.57 radio in mine after having AP4,
all reception excellent. Very impressed particularly on the Bluetooth range.
where can i get 1.57 my mate?
thanks
chris reilly said:
where can i get 1.57 my mate?
thanks
Click to expand...
Click to collapse
I used the search feature and found it,
http://forum.xda-developers.com/showthread.php?t=372904&highlight=radio
wifi problem
i can not connect my network wireless. i have download the RUU_signed file.so how to change the radio with that file? sorry i don't know about it?
problem
i connected with by wireless but when i put an URL address in the Internet Explorer and an error appear "The adress is not valid.Check the address and try agian" how to fix it?
I've scoured the forums and the net but can't find how to turn off the "Enable advanced network functionality" in Windows Mobile 6.5.
I loaded my first WM6.5 ROM a while back and need to update it but can't get sync'ed to load the update.
Please point me in the right direction, I've lost most of my hair already, bout to pull the rest out.
Thanks in advance.
Settings>Connections>USB. I always turn it off too since it causes issues with VPN, firewalls, wireless, and is just plain annoying since every device you connect then creates a hidden hardware entry on your PC for the network connection and the device/usb connection.
What is also funny, is most Vista machines require this "new" setting to be turned off to connect as well.
Here's a link in case you want to get rid of those pesky extra device manager entries.
Device Manager does not display devices that are not connected
http://support.microsoft.com/kb/315539/en-us
Cheers,
hilaireg said:
Here's a link in case you want to get rid of those pesky extra device manager entries.
Click to expand...
Click to collapse
Had that already, that is how I knew about them all. Just a pain to delete them, and after 50+ are on your machine it seems to start to slow things down.
Hello xda ppl,
I'm going crazy with an issue on my HTC HD2. The WiFi Router doesn't work anymore.
Ok, first of all, if I hard reset the phone, the WiFi Router works again, so the problem is on actual settings. I don't use this features very often, so, really, I don't know which is the issue root cause. Probably some applications installed in the last months... However uninstall all applications doesn't help me...
I perform some test hard resetting and then restore only some sections (using SPB Backup). If I restore Windows Directory OR the Windows Registry WiFi Router doesn't work!
Since I don't wanna reset my device since I have to install a lot of applications, configure it, configure the device.... Very long time to do that....
Does someone advise me if there's a way to restore the original HTC WiFi router functionality without reset my device?
Or, maybe how can I reset the actual configuration modifying something on the registry/Windows directory?
Thanks!
In case You have programmed SPB backup for automatic backup try to restore the oldest backup You have and start from there.
Whenever I install a new app I do a backup and then check all essential functions including WiFi-router, if probs occur I do an immediate restore
Happened last week when I installed the 3G-enabler/disabler from XDA: BT and WiFi router didin´t work any more, so I did just a restore and everything was fine again
Thanks for reply troed, backup the device first to try a new application is also my goal...
Btw, my oldest backup is from 10 May 2010 and the WiFi router issue is still there... As already said I use the Router functionality only during Holidays (like now ) or just in rare cases. So the problem is very old... But I cannot figure which is the application that cause the issue!!!!
Now I'm surfng the internet using USB sharing features, but is very slow compared to WiFi connection!!!
So, I'm scratching my head to restore the router functionality.... Maybe there's a way to delete all the file/registry entries and then let the device restore it like during the first initialization...
However, just now I tried the Tom Condon Wifi Internet Sharing package... No way!
Hey, I had this problem with the wireless router a few days ago too... You might want to take a look here http://forum.xda-developers.com/showthread.php?t=756830&highlight=wireless+router+problem
Regards
BTW: I remember now I had a prob with WiFi-router once I updated Intel-radio-drivers on my VAIO - notenbook, Router didn´t work at once. I took the old drivers and suddenly it was oaky again, but it was on the side of the NOTEBOOK ! (has sumthin to do with the protocols TCP/IP etc.)
Did You check this also`?
ahgao said:
Hey, I had this problem with the wireless router a few days ago too... You might want to take a look
Click to expand...
Click to collapse
No way, this is not my problem and your solution it doesn't work for me! However, thanks for your feedback!
troed said:
I updated Intel-radio-drivers on my VAIO - notenbook, Router didn´t work at once. I took the old drivers and suddenly it was oaky again, but it was on the side of the NOTEBOOK ! ..... Did You check this also`?
Click to expand...
Click to collapse
As already told, if I hard reset the device I can use the WiFi router without problem on the same notebook. So, I believe the problem is on HD2...
BTW. I tried WM WiFi Router application. I remember now I had an old license working fine also with ver 2.0.
Now the WiFi router works again. For sure, not the original one, but this is much better. I'll only take care about battery drain. In the previous version the application drained the battery in a while.
I would like to know WHY the original router doesn't work, but since I have "limited" access to the network, for now I'll use the "WM WiFi Router" temporary solution.
Any other feedback are welcome!
Hmmm... I think there are a few settings to adjust for the router to work...
If the post I posted doesn't work, then you might have to check if your settings under
Settings ---> All Settings ---> Connections ---> Connections ---> Advanced ---> Select Networks
For me, both are under the Internet settings... Example "Vodafone Internet"...
Even for "Programs that automatically connect to a private network should connect using:" I have set under the internet settings instead of My work network...
When you turn on the wireless router, you are also given an option to choose which kind of network/connection you would like to use... Choose that one that gives you your internet connection... Example "Vodafone Internet"...
And if all else fails, you may try my method posted in the past few posts... If that STILL can't help you, I'm sorry but I've tried my best! =) Hope you can settle it soon!
Also, make sure that your Broadcom Network adapters connect to "The Internet" and not work
No way also playing with Network Settings. I had tried a lot of combination without success... Seems an "unknown" application/s have change something on Windows directory AND on Windows Registry that prevent WiFi Router to work. I have so many custom settings, with application like Co0kie's Home Tab, CSMI, BsB Tweaks, Pocket Informant, Klaxon, Chainfire-HD2-3D-Driver, incall lock, NET CF 3.7.... and so on... So, probably one of these apps have changed something in a wrong way.
And again, since hard resetting the device solve the issue, with very big patience, after a reset, I'll start again to customize my device trying the router each time I install a new application or apply a new settings!
Just last question: Does someone know which is the registry settings for so called "Fast Call" (the second standard tab) where I put the contact photos?? Or in general does someone know which is the registry settings for manila settings (like the tabs settings)?
Regarding WMWiFiRouter mentioned in my previous post is a good application, but I can confirm it will drain the battery and probably also burn it, since its temperature has reach an high value. I can hardly hold the phone in my hand!
OH MY GOD!
After 3 days of resetting, restoring, change Windows Registry, remove some files from Windows directory and in general going crazy to find the issue route cause.... It's incredible, but I finally hit the target!
I changed some settings using "BsB Tweaks" (great app moreover)... I'm pretty sure I changed the settings related to WiFi, plus some others! I reset again the device and try again to be sure!!!!!!
I'll post the result asap if you're interested!
One of the problems with wifi-router is that it always uses channel 1. If any other router nearby uses channel one, you have no chance to connect to it, as it is very very low power. Check networks in your neighborhood if any of them uses channel 1, or go somewhere where there is no wifi (like park) and try it there.
Well, I'm not really sure, but disabling TCP Cache (on BsB Tweaks) solve the problem. I cannot be sure because now the "original" WiFi router works so I don't want touch anything else!
Maybe re-writing the BsB configuration help to solve the issue....
I'll investigate better when I come back from holidays!
do you have activated the wlan-n modus? if this registryhack is activ, wlan router dont work anymore.
i think this tweak can also edited in bsb-tweak tool or manual in windows registry. so deactivate the 802.11 n modus and your problem is solved.
Yes, I can confirm, this is one of the modification I applied on BsB, togheter with:
- TCP/IP High Cache = Off
- WiFi N = Off
- WiFi StandBy = Off
After that, WiFi router works again!
Damn! That's because I need to extremely tune everything!!!
troed said:
BTW: I remember now I had a prob with WiFi-router once I updated Intel-radio-drivers on my VAIO - notenbook, Router didn´t work at once. I took the old drivers and suddenly it was oaky again, but it was on the side of the NOTEBOOK ! (has sumthin to do with the protocols TCP/IP etc.)
Did You check this also`?
Click to expand...
Click to collapse
You're right troed, with the latest drivers of Vaio wifi router doesn't work. Now it's ok with the old ones.
Not a Pro here, if this post needs to be in different subforum, admins please help and move so this finds ppl that need it... I found this to fix my EXTREMELY Frustrating "will not connect" PROBLEM that seems to be VERY COMMON. Sometimes it would connect at random, some times not at all, sometimes would connect one time after install then never again. THIS WORKS ON MY Win10 but may work on other Windows versions...... *Here is my windows 10 FIX:...... *Go to "All Settings" page,...... *Go to "Network & Internet",...... *Go to "Network & Sharing Center",...... *Go to "Change Adapter Settings". Now on this page it shows all your network adapters, Wireless adapter card, Ethernet/Lan card, and one called "TAP-Win32 AdapterV9". (THIS IS THE ONE that needs to be enabled for ClockworkMod to communicate with your phone, I believe it is a VPN Virtual Private Network adapter (Software, not Hardware?) that kinda simulates Ethernet through USB/WIRELESS type connection? The actual adapters on mine were labeled "Ethernet , Ethernet2 and" Wi-Fi". Ethernet 2 was named "Network 3" but I think the names have no bearing on this fix, WHAT each adapter actually is what's important...... *FIRST, DISABLE the "Ethernet Connection",...... *Then ENABLE the "TAP-Win32 AdapterV9",...... I've kept the "Wireless Adapter" ENABLED with no interference probs so far...... Your ClockworkMod should connect and turn green now! This has worked on several "won't connect" Windows 10 laptops of mine!!! May work for you, may not, but dang sure worked for all my probs I'm also trying to install ClockworkMod Tether on an XP laptop, it seems TAP-Win32 AdapterV9 is not in the Network Connections screen and I will have to manually download TAP-Win32 through a different Teathered Win10 laptop and manually install it as it may not be bundled with the old XP OS (still working on this, no results to report yet) ... I believe the TAP-Win32V9 is a Virtual Network Adapter app that allows ClockworkMod Tether to network with our phones! If I'm wrong or right let me know! I am a Rank Amateur after all ? the next challenge is to network all laptops and devices together to where all can access internet data through one laptop that's Teathered to this one cellphone...
Confirmed, I have done this same thing on my Windows XP laptop and have fixed the "will not connect". Had probs disabling the ether net adapter, said In use by other apps or users, cannot disable at this time (to paraphrase) ... Googled for methods to fix that from command line, that worked. Now Clockwork Mod Tether work reliably on all my Windows PC's!
Waited? here has been getting the same error while connecting but yet no any site did resolve out this issue, what would be the reason behind it? expected amazeinvent did but which command line or any other option make it resolve? or can do something? do you guys have any idea about it?