Since I have this 2.20.07 OS ROM running, which was translated from CHS to WWE i have a few chinese connections settings that i would like to get rid of.
When I deleted the lot in the registry my phone stopped working. Not a good idea!
I cannot delete them in the 'advanced' / 'network management' / ' Edit' / 'General' dialog (delete is just grayed out where my manually typed in settings can be deleted.
Any clues?
Related
I am trying to keep the internet connection open (while some data is transferred) I have set up a dummy email account which sends & receives every 15 mins. This opens the connection but closes before the data is finished.
Is there a registry hack to keep the gprs open for say 5 mins.
Cheers
SteveW
lobster
I have found and tried :
HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\T-Mobile Internet\AlwaysOn = 1
When I try to set the value to 1 i get an error saying error setting registry information.
Cheers
SteveW
if you follow the app unlock procedure in this forum you will be able to edit the registry. registry keys are locked by default
rgds
GPRS setting
I have unlocked the device
I have set the following :
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\Virgin GPRS]
"AlwaysOn"=dword:00000001
"ConnectionGUID"="{1BDFAB9A-77AA-1EF0-BE55-D1132E79D273}"
"DestId"="{436EF144-B4FB-4863-A041-8F905A62C572}"
"Enabled"=dword:00000001
"EntryType"=dword:00000002
"RequirePw"=dword:00000000
"Secure"=dword:00000000
"SecureLevel"=dword:00000000
but the connection does not remain open
any ideas?
Unlocking phone
I meant what would the cost be for the unlocking people to write change the software.....
Any contact details
Cheers
STeveW
How or where can I assign permissions for apps that use floating notifications?
I use a couple of these apps, and after updating to a new firmware (official) in my Ascend P6 they say they don't have permission for "showing the area of placement" or something like that (I'm not quite sure how to translate this properly - the message in Spanish is: "Esta aplicación no tiene permisos para mostrar el área de colocación") and niether of them show the floating notifications.
I tried checking the permission manager of the phone (which I had to dig out from the shurtcuts because it dissapeared from the settings menu) but there are no permissions for that.
I'm running Android 4.4.2 with B512 firmware.
Thanks in advance
I found a solution to this issue:
The problem, apart from the fact the phone was not allowing apps to show these types of messages on screen, was that the option to manage this permissions was hidden in B512.
The solution involves modifying a specific line in the build.prop file that hides or shows a particular option inside the built in phone manager app.
The line is ro.config.DelStartupManager=true and needs to be changed to ro.config.StartupManager=true. This enables a menu inside the phone manager that leads to the "placement area" permission settings (again, not sure if this is the actual string in English) from which you can assign these permissions to any app.
Hope it helps.
Hi everyone,
I'm working on an AOSP device which has a limited set of locales, and I wanted to add Portuguese to the device. I did this by modifying device/qcom/common/common.mk and adding in pt_PT to PRODUCT_LOCALES. With the image that this build produces, I can successfully set the language to Portuguese through the setprop persist.sys.language settings, but if I go to Settings -> Language and Input -> Language, Portuguese is not on the list.
Does anyone have any ideas on how I can add a language to the languages list in Settings?
Thank you.
Hello, (1st sorry for my english)
I have to configure as you can read 1000 Samsung Galaxy Tab S2 for a project (i'm doing it actually)
but after a lot of work i've just made 200 of them, so i'm here to ask for help.
What i've to do (step by step in order to know all) :
- start the tab
- choose french Langage / next
- don't attach to a wifi ssid / next
- uncheck the first "consent to provide diagnostic and usage data" / next
- agree terms and conditions / agree
- set GMT+01:00 / next
- NO First and NO Last name / next
- uncheck "Use Google's location service" / uncheck "Help improve location services" / uncheck "Help improve your Android experience" / next
- ask to create a Samsung account / skip
- Are you sure / SKIP
- Add fingerprint / LATER
Now i'm on the desktop
go to "settings"
- Sounds and notifications -> Volume -> System to 0
- Display / uncheck Auto
- Display / set Screen timeout at 10 minutes
- Users replace You by CAMPG
- Lock screen and security / change Screen lock type swipe by PIN and put 0000
- Notifications on lock screen / Do not show notifications / done
- Lock screen and security / Show information / Owner information / put : CAMPG
- Lock screen and security / Secure lock settings / Lock automatically / change to 30 minutes
- Lock screen and security / allow unknown sources
after that i'm connecting an usb key with an OTG cable and i'he to install 15 apk.
and the last thing is to fill in some informations (always the same ) in each program i've installed before so if i could put these informations in the clipboard it will be perfect
I will really appeciate if someone can help me...
Merci beaucoup
informations
Galaxy Tab S2
SM-T810
android version 5.0.2
Kernel version 3.10.9-6572077
Build number LRX22G.T810XXU2AOL6
Checked posts / searched for an existing answer... didn't see anything (please move this post if it is in the wrong section)
So I have a app, when I open it asks me what Google ID to uses (preferred ID) but after selecting a Google ID I can not change to a different ID
- If I clear the App Cache the selected ID persists
- If I clear the App Data the selected ID clears and the app returns to the select ID option
- I keyword searched for the App name on my device (Nexus 5x)with Root Explorer (12 different file locations, with subfolders and a bunch of empty folders)
Clearing App Data is a working interim solution, the downside is that every time I clear the App Data the app "downloads assets" (40mb+ ~40 times per day - 1.6Gb!)
What I am hoping to find is a app / script / terminal / log solution that will tell me what file is being modified when I select the Google ID, so I can delete that file re-open the app and change Google Logon
(I contacted the app developer, they said they may be able to fix the problem on the next patch eta 12-24 months)
So I have tried these apps:
https://play.google.com/store/apps/details?id=file.observer
https://play.google.com/store/apps/details?id=scd.lcex
https://play.google.com/store/apps/details?id=eu.thedarken.sdm
But I didn't see system changes (root level) or I didn't know what to look for in LogCat
Any help or suggestions are appreciate!
- I do not have a computer with me (ADB) will be about 7 days before I can try that
- I have been experimenting with deleting files / folders and testing to see if I get lucky (probably not the best method)
- I am not a developer
My current process (as of today) - I clear the app data, then restore the app data with TB (just restoring doesn't clear the sign in status)
As long as my TB backup is "always" in the signed out state, then the "app assets" restore with no issues (and I don't have to keep downloading them)
I am looking for a way to get these (2) operations into a single script / file / shortcut, but it is working for now
I did try the terminal with cp -a (copy the assets - app had a error on library permissions when the files were restored) chmod, chown, and find (try and locate the file) but had minimal success