Battery Life with New ROM 20060426 - iPAQ rw6828, XDA Atom Software Upgrading

I am getting very poor battery life.
The battery drains within 24 Hrs to a dead phone.
Is it normal? I have heard, people talking about a battery life of 3-4 days.
What can I do to correct this problem.
Please help.

Hi Anand
I, too, had terrible battery life once I upgraded. I had heard that sometimes if you flash the ROM again over the last time it improves the life. I was skeptical ... until I did it last night.
My device was still at 94% when I woke this morning, and by 5pm this afternoon had only dropped to 87%. I have never had such great battery life! Never!
Give it a try. Can't hurt.
Kevin

I tried reflashing the ROM, but it did not had an impact on the battery backup.
Do I need to take care of something while reflashing it.
Thanks a lot for the reply and the help.

Has anyone else had issues with draining battery life? After flushing with the latest official ROM, 30% left after left switched off O/N!!!!
Any fixes? is it a known issue?
Thanks!

i am having the same problem...i also reflashed...but it seems like the device doesnt go to standby mode after 'x' minutes of inactivity as selected in the power options. is the same thing happening with u 2?
also, are u using O2 Plus?

initial charging
have tried recharging your atom for 8 hours when you first bought it? try it. it worked for me. it extended my batt's life

Yes, I am using O2 Plus, also, I think charging of Li-Poly Batteries does not require to be charged for 8 Hrs. Infact it may result into over charging.
By the way, I am getting precisely 24 Hrs of backup when using PUSH email support with Ms Exchange Server.

charging
check the manual.. it says there u need to fully charge the atom for 8 hours.. that's for the initial charging. i also called one of the reps in the service center for atom here in the phils and that was waht he told me to do. cheers mate

Hi try removing the WM5 Battery Icon on the top bar through the registry... i notice that helpson my atom. i have O2 batery meter running instead.

Re: charging
I have poor battery life as well. Unit is discharge within 12 hours.
I have a whole lot of applications installed, so after I've reinstalled the ROM, I'd my backup fully restored.
I am wondering if that's a mistake as it might also "restore" the issue with the battery life. Anyone has advise on this matter?
Thanks!

I neva did that 8hrs initial charge since too excited to explore on the 1st touch~ hehe..
Btw, it's said many times that plug-ins that probes hardware needs extra battery power ie. memory/battery/storage. I've none of those plugins and even on a2dp stereos, the battery only drops from 100 to 80+ on few hours of mp3s. Some players can switch off your backlight and still continue playing mp3s ie. WM10/TCPMP, see their button assignment options. You might also wanna remove that battery icon on the top right through the registry. Set the backlight 10secs, slider to 1-4 and power down 1min helps me alot too.

reflashing
heya ppl...what do you mean by reflashing?Cheers...

Battery Died on me
hey the battery was low, and i plugged it into the computer jack (to synchronize), which was supposed to rechareg the battery, an hour later, it beeped saying battery was too low, and was shutting down. and it shut off completely.
now i am rechanging with the charger, and the amber light is on.... but after 30 mins of charging, i still can't turn on the phone.
when i try, the green light seem to flash onmce every 30 seconds....... and i have put it back in the charger
when it completely discharges, do i have to fully recharge before i can switch it on?

Atom Manual Help
Well, after getting fed up with my poor Atom's battery life, I checked out the manual to see what it said about battery life. It does say to charge the battery for 8 hours intially, and for the first 3 charges after that you must drain it completely then recharge it fully--for a total of 3 times. Okay, so I did this and I haven't noticed a difference (I know others say you aren't supposed to do this with a Li-Ion battery but it's in the manual!).
Anyone else tried this?
The only other thing I haven't tried was reflashing (reloading the ROM).
It seems this issue is the bane of the Atom.

Battery life
try to reduce the "brightness" and make sure to end every task completely! 8)

Battery Drain
I already wrote about this in some other forum but this the same problem with my O2 with Bluetooth not more then 8 hours max. Without bluetooth. 20 to 24 hours.
I never leave any application running I use the memory settings to close all applications.
I still do not find any diff. I have closed the IR, I have reduced the backlight time to 10 Secs. I have reduced the backlight to 3. No change.
I have already complained about this to O2 but no result. They are probably stuck with Windows people not supporting them or with no solution. They are not even responding now on this issue. TOOOOO BAD
I hope someone can find a solution.

Flash the ROM exactly as per the procedure. Normally the last part is not read properly. After the ROM is flashed they ask to reset the device twice. One time a Hard Reset and another time a soft reset before you load the data and programs. If you follow the procedure properly maybe you will solve the battery problem like me and many others.
If you are using bluetooth switch it off and check you will come to know the exact battery life. Secondly in settings keep IR off. Backlight a bit low 3 or 4 as you get proper vision, without reflection and most of all saves battery. Most important close all programs by going to Settings>Memory>close all so that all applications will close and not consume the battery. This is a windows software flaw which needs correction but no one does anything for it, not even microsoft.

I am getting poor battery life with New ROM 20060426 i also reflashed but nothing
it's the same prob with old roms ??
thanx

did you perform reset twice after reflashing? first rard reset, second soft reset?

thanx kropotov with reset twice after reflashing all ok . after 24 hours battery still in 75%
thanx

Related

Prophet runs out of power when battery is at 17%

Hi,
since I flashed Crystal V4 onto my VPA compact s, the phone reports out of battery power when all battery indicators actually show around 15% to 17% battery left. It shuts down and can't be restarted without plugging in the charger first. Is this a common known issue? Could it be caused by overclocking (to 260 Mhz). Can this somehow be fixed?
Apart from that: superb ROM.
Michael
same problem with Aserg WM5 rom when battery indicators show around 15% to 17% battery left, it shuts down
try not to overclock your prophet, see if it helps....
how much time does it take to come down from 100 % to 15% ,24 hours or 48 hours or more ?
when push mail is activate 24/48 hours, if not activate more 72/96 hours
Surprisingly yesterday my Qtek S200 with Mysterious 1.0 did the same thing, with only 20% left, it keep rebooting like if the battery was low...
I actually have had the same issue happen twice and I lost everything sinceI did a hard reset. The first time I thought it was maybe the battery since it only turned on while being charged. I got a new battery and it worked for a while but last Friday it happened again and lost everything again. Not sure how low was the battery but I am beginning to suspect that maybe the internal battery is messed up. Can anyone tell me if that is the case. I also stopped overclocking but it happened a second time.
Sorry for that but as a note Prophet doesn't have internal battery as it stores its user's data on a ROM not RAM. Internal battery was in Win 2003SE and previous. By the way, I've the same problem with WM5 NoID version.
yamilrx said:
I actually have had the same issue happen twice and I lost everything sinceI did a hard reset. The first time I thought it was maybe the battery since it only turned on while being charged. I got a new battery and it worked for a while but last Friday it happened again and lost everything again. Not sure how low was the battery but I am beginning to suspect that maybe the internal battery is messed up. Can anyone tell me if that is the case. I also stopped overclocking but it happened a second time.
Click to expand...
Click to collapse
Thanks for clearing that up. I thought there was some kind of internal battery that ran the memory such as the clock and this is why they tell you to remove the battery for more than 15minutes to reset the device.

[Q] Battery life - what's causing the problem?

Hi
I have a pretty serious problem with the battery life on my tg01! I've read the other threads here and at Modaco on the battery problems but thought I'd raise it again. I have a mugen battery now (1100) but am barely getting a couple of hours use. The battery indicator gets stuck and can go from 100% to 40 suddenly, before a few minutes later switching off. I have the original wm 6.1 rom and spb mobile shell 3.5, but the problem was there still when that was uninstalled. I can leave it charging overnight and the battery can suddenly drop and be dead in a few hours.
I'd have thought mugen battery, although only a 1100 one would have made the difference, but there's something definitely wrong because it should not be that bad!!!
What do you suggest is the best thing to do?? Will a different rom definitely solve it? or will it be down to one of the numerous programs I've installed? Or something else? A faulty phone?? It's a problem others definitely have, but is there a single working solution??
cheers!!
as far as i know battery life is a problem with all tg01's, atleast i have the same problem. the huge screen takes alot of power, add 3g or wifi and your phones going to be dead within 2 hours ! one way to overcome this is to make sure you disable data connections when not needed and reduce the backlight settings. i've been able to get over 24 hours using this method but if you want longer life the only real solution im aware of is to get the 2600 mugen battery.
EDIT: I should also mention sense and other memory hungry apps ie opera will effect battery life greatly, infact i find if i use sense my phone can be dead within 8 hours and thats with minimal useage. Constant use of opera will have the phone drained in a matter of an hour and a half.
As for a rom solving it, i dont really think its tied to a rom in anyway but you may want to try noskers rom - i find this one to be the most stable and battery life definately seems longer but i may be imagining that !
Get Task Manager, go to tab "Devices" and stop device "BAT1". Battery indicator will not work, but you can use tg01 till battery fully discharge. After power off (there will be no "shutting down" screen) plug charger immediately.
By this you will use all the capacity of battery, so you can determine if it's battery problem or tg01 battery level measuring circuit.
I've heard about battdrvr.dll modifications for other PPCs to use with higher capacity batteries, but couldn't find anything for tg01.
What Power Saving Settings do you use?
maciek90 said:
Get Task Manager, go to tab "Devices" and stop device "BAT1". Battery indicator will not work, but you can use tg01 till battery fully discharge. After power off (there will be no "shutting down" screen) plug charger immediately.
By this you will use all the capacity of battery, so you can determine if it's battery problem or tg01 battery level measuring circuit.
I've heard about battdrvr.dll modifications for other PPCs to use with higher capacity batteries, but couldn't find anything for tg01.
What Power Saving Settings do you use?
Click to expand...
Click to collapse
will try that definitely. it happens with the new mugen battery too however.
The Power Saving Settings I use are CPU medium (have tried low and high too), limit CPU speed for battery (tried on and off options) Wifi power consumption, restrict sleep mode OFF, Enable Wifi during sleep mode to OFF, backlight very low. Adjust backlight automatically OFF, 30 seconds backlight timer, 1 minute device sleep timer.
I am guessing there is a rogue program using up the CPU constantly running down the battery. Have you tried a hard reset? (probably a good idea to upgrade the ROM while your at it )
Well I've tried disabling the battery device in task manager. I'm not sure that made a difference, but at least I wasn't able to see the meter jump around..
a hard reset may well sort it, and may end up doing that. I can't see any high intensity CPU programs. anything else? will google latitude suck up the battery this quick?
One other thing which has started recently, which may persuade me to hard reset is that the blue led light flashes long after an sms has arrived. a soft reset stops this, but it will start again when another sms comes through. I've tried one such notification reset program on this forum but its made no difference.
what can be done to stop this?
Edit:
I should really have considered another post really called niggles I need to sort out on my TG01.
But how can I stop the screen going off immediately when a call comes in? I'd rather it waits say 10 secs then go off. the options in pocket toolman do not seem to work. I need the screen on a bit because often I switch to speaker straight away.
When I plug the charger in the TG01 the battery will charge up to 100%. The charging process will then stop (orange light turns off and never goes on again).
If my backlight or wifi is turned on, or anything else is running, the battery will start draining back down, but the charging process will not re-start. The battery will display 100% full as it might somehow detect the charger is plugged-in (?).
When I start using it, although the battery might have drained down to 40%, it will show 100% then suddenly jump to show the actual battery level.
I used to charge it overnight with backlight at full level and it would go from 100% to 0% after using it for a minute or two in the morning. I couldn't turn the device back on, even with charger plugged back in because the battery was so empty.
The trick is to turn off the backlight / wifi when it's done charging, or if you charge overnight, turn it completely off so it doesn't drain the battery when it's done charging.
hope this helps
bdarras said:
When I plug the charger in the TG01 the battery will charge up to 100%. The charging process will then stop (orange light turns off and never goes on again).
If my backlight or wifi is turned on, or anything else is running, the battery will start draining back down, but the charging process will not re-start. The battery will display 100% full as it might somehow detect the charger is plugged-in (?).
When I start using it, although the battery might have drained down to 40%, it will show 100% then suddenly jump to show the actual battery level.
I used to charge it overnight with backlight at full level and it would go from 100% to 0% after using it for a minute or two in the morning. I couldn't turn the device back on, even with charger plugged back in because the battery was so empty.
The trick is to turn off the backlight / wifi when it's done charging, or if you charge overnight, turn it completely off so it doesn't drain the battery when it's done charging.
hope this helps
Click to expand...
Click to collapse
This is not true. When the battery charges up fully, the orange charging light is extinguished to let you know it has finished charging, however the battery is still supplied with power to keep it fully charged. I know this because I use GPS alot on the phone and when it's fully charged using the car charger, it will still be 100%.
Try hard resetting your phone too. If it doesn't work, then there is something wrong with your phone!
Well it's bizzarre... the battery meter on the tg01 is certainly pretty dodgy.
with the flashing leds, what does anyone suggest? is there a way to change the led notifications back to default?
And regarding the screen going off immediately when a call comes in, it looks like there's no fix - similar threads still have no answer, unless anyone has more suggestions?
Update: I have done a full hard reset and a wm6.5 upgrade but the battery issues are still here. Has everyone who has had this issue taken it back to orange? It barely lasts 5 hours the battery.
Anything else at all to suggest???
BiG K said:
This is not true. When the battery charges up fully, the orange charging light is extinguished to let you know it has finished charging, however the battery is still supplied with power to keep it fully charged. I know this because I use GPS alot on the phone and when it's fully charged using the car charger, it will still be 100%.
Try hard resetting your phone too. If it doesn't work, then there is something wrong with your phone!
Click to expand...
Click to collapse
I stand corrected.
While this was true before and had tested a few times with two different TG01 both with Orange UK stock ROM, I have retested it now and it does not happen anymore, but I have flashed a new ROM...
Apologies for the confusion.
Hi all
I was reading this thread and preferred to add my 'query' here rather than start a new one.
My TG01 has an original WM 6.5 rom minus the SPB Shell. I haven't experiences any negative experiences yet except for the fact that I have often heard about charging the battery for 8 hours etc and charging it with phone off which I always do except on few occasions I connect with USB cable to my pc /laptop...in my case I will charge my set with the toshiba wall charger that came with the set and orange LED will illuminate a few seconds after charger is plugged-in..from there onwards the orange LED will stay illuminated for maximum 3 to 4 hours and then will turn-off. I am not having any battery problems except for the usual battery drain depending on usage and apps but nothing unusual.
I'd like to know if this is normal? Is anybody else experiencing this? Not charging more than 3 to 4 hours (orange LED turning off after 3 to 4 hours).
I would appreciate some help on this 'doubt'
Thanks
I think it's problem with driver and charging akku. I have custom rom with 6.5.5
and when i charge my akku when it is on 20 % after 20-30 min shows me that 90 % full... After 1 1/2 hour akku full charged.
Greets ALcAtRas
maciek90 said:
Get Task Manager, go to tab "Devices" and stop device "BAT1". Battery indicator will not work, but you can use tg01 till battery fully discharge. After power off (there will be no "shutting down" screen) plug charger immediately.
By this you will use all the capacity of battery, so you can determine if it's battery problem or tg01 battery level measuring circuit.
I've heard about battdrvr.dll modifications for other PPCs to use with higher capacity batteries, but couldn't find anything for tg01.
What Power Saving Settings do you use?
Click to expand...
Click to collapse
is this a solution to the 20% wifi problem?
olyloh6696 said:
is this a solution to the 20% wifi problem?
Click to expand...
Click to collapse
Well. it's not the solution, but this procedure can be a useful roundabout to access to wifi, or allow you to take a vital picture when you really need it and your battery is under 20% charge.
Imagine that you must send urgently a picture and you can't do it because someone from Toshiba decided this stupid limitation when you are at the end of the battery life.. following the maciek90's procedure, you can save this limitation and drain your battery up to the 0% if you want
Bravo maciek90! and thank you
Pere said:
Well. it's not the solution, but this procedure can be a useful roundabout to access to wifi, or allow you to take a vital picture when you really need it and your battery is under 20% charge.
Imagine that you must send urgently a picture and you can't do it because someone from Toshiba decided this stupid limitation when you are at the end of the battery life.. following the maciek90's procedure, you can save this limitation and drain your battery up to the 0% if you want
Bravo maciek90! and thank you
Click to expand...
Click to collapse
thanks for the info Pere!
guys, also another thing i learnt from my physics class is that putting a recharegable battery in the freezer for 1 hr, somehow give it longer battery! I tried this on my tg01 battery, it strangely worked , or it was all in my mind!
you've gotta make sure the battery isnt wet from condensation when you put itback in the phone! my battery last slightly longer. i dont do it often, only once every now and again... try at your own risk!
olyloh6696 said:
thanks for the info Pere!
guys, also another thing i learnt from my physics class is that putting a recharegable battery in the freezer for 1 hr, somehow give it longer battery! I tried this on my tg01 battery, it strangely worked , or it was all in my mind!
you've gotta make sure the battery isnt wet from condensation when you put itback in the phone! my battery last slightly longer. i dont do it often, only once every now and again... try at your own risk!
Click to expand...
Click to collapse
...the duracell bunny was a penguin
Not, seriously, I'll try it and if it works..but all it sounds incredible!
Best regards
Pere said:
...the duracell bunny was a penguin
Not, seriously, I'll try it and if it works..but all it sounds incredible!
Best regards
Click to expand...
Click to collapse
Aha
I seriously warn you be careful of condensarion!
maciek90 said:
By this you will use all the capacity of battery, so you can determine if it's battery problem or tg01 battery level measuring circuit.
Click to expand...
Click to collapse
I definitely think it is either level measuring circuit problem or battery driver itself - not too big power consumption.
I can repeat without any problems situation where battery level suddenly decreases about 20-30% . I noticed it only during internet operations via GSM so utilizing radio. Why , I do not know . How to fix it ? I do not know yet but it is enough to restart system so that battery indicator start to show correct value - until next failure .
I thought when bad indication occures it would be enough to stop-start baterry driver using way You described. It does not work. Stopping driver cause battery indicator shows unknown level. Starting driver not fix it. Battery indicator still shown unknown value. Only restart fix it. It should not behave this way.
Maybe problem is not in driver but top bar of today screen when battery indicator exists, should have any kind of reset too?
BTH. What software is responsible for displaying battery indicator ?
Regards
fxdjacentyfxd
Today morning next described previously error concerned with GSM radio.
I had GSM radio switched off in the night and phone in sleep mode.
Morning, when I set phone to operational mode , battery indicator showed 50% - the same as yesterday evening.
When I switched GSM radio on, battery indicator suddenly showed 30% and none phone operation could change it. Only system restart caused battery indicator started to show correct value again - 50%
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Today morning next described previously error concerned with GSM radio.
I had GSM radio switched off in the night and phone in sleep mode.
Morning, when I set phone to operational mode , battery indicator showed 50% - the same as yesterday evening.
When I switched GSM radio on, battery indicator suddenly showed 30% and none phone operation could change it. Only system restart caused battery indicator started to show correct value again - 50%
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
yes! i am not the only one! recently i got a data plan for my tg01. when i use the data connection for 1-2 minutes, the battery drops 10% and it will stay at its false value until i soft reset. i thought that the problem was with the rom that i was using but i guess im wrong. what ROM are you on? it is very annoying and i have to constantly reset my phone. i have done some test, and if i keep using it, on data, the battery could conpletely go dead like when it is out of power, then when i power back in it is back to its true value. any solutions?!

[Q] Official battery, reporting false capacity

I've bought a new legit/official (has holo, serials etc.) Atrix battery.
Charged it to 100%.
During usage, its draining literally 10% an hour with very light usage (several minutes an hour). In short its draining at three times the speed of my 1 year old battery.
I've tried wiping battery stats but that didn't work.
Any ideas, or is the stats just buggered and I just gotta run it in? (ie it will go to zero then sit on zero for 5-6 hours lol)
note I've gone back to my original battery in meantime rofl
EDIT: The actual problem is that the batt is reporting much less capacity than it actually has
|The new battery is great capacity wise lasts till midnight
However the stats are still totally screwed, it will say 1% by midday, then hum along until midnight fixed at 1% (I dunno exactly how long for as I can't take the risk of leaving it off at night then its dead and I don't wake up for work in morning). |
Could just be a bad battery. Considering the old works fine that's probably the problem.
wintermute000 said:
I've bought a new legit/official (has holo, serials etc.) Atrix battery.
Charged it to 100%.
During usage, its draining literally 10% an hour with very light usage (several minutes an hour). In short its draining at three times the speed of my 1 year old battery.
I've tried wiping battery stats but that didn't work.
Any ideas, or is the stats just buggered and I just gotta run it in? (ie it will go to zero then sit on zero for 5-6 hours lol)
note I've gone back to my original battery in meantime rofl
Click to expand...
Click to collapse
wintermute000 said:
I've bought a new legit/official (has holo, serials etc.) Atrix battery.
Charged it to 100%.
During usage, its draining literally 10% an hour with very light usage (several minutes an hour). In short its draining at three times the speed of my 1 year old battery.
I've tried wiping battery stats but that didn't work.
Any ideas, or is the stats just buggered and I just gotta run it in? (ie it will go to zero then sit on zero for 5-6 hours lol)
note I've gone back to my original battery in meantime rofl
Click to expand...
Click to collapse
I have a similar problem with the original battery that came with phone it drains the charge quickly to 1% and on one 1% it gives a battery life of more time than the time it took to discharge from 100%.i was thinking of buying a new battery but now i am confused that what should i look before buying the battery to get a battery that can show me the exact charge on the indicator.
I have tried all tutorial of calibration used different roms and kernels but nothing seems to solve the issue.
well I might try that then, just let it run to zero see how long it lasts then see whether the stats come good over time
OK help needed.
The new battery is great capacity wise, lasts from morning to bedtime with >2 hours of bluetooth music, 30 mins calls, a ton of texts.
However the stats are still totally screwed, it will say 1% by midday, then hum along until midnight fixed at 1% (I dunno exactly how long for as I can't take the risk of leaving it off at night then its dead and I don't wake up for work in morning).
Aside from wiping stats which I have tried, is there anythnig else I can do?
I really want to use it, like I said real life capacity is great, but if its always giong to be reporting 1% its a bit dicey not knowing how much batt you really have left...
same issue with my spare battery not sure wtf is going on
When I have battery stat problems the following has always fixed it:
1) leave phone on until it dies
2) take back off phone and plug into wall charger
3) after batt symbol shows 100% (without unplugging or turning off the phone) remove the battery. After a minute or so battery symbol will have question mark
4) put battery back in and leave it for at least 2 hours (seems like I have had to press the switch sometimes but you don't want the phone to reboot or you will have to start all over)
5) reboot into CWM and wipe the battery stats
6) reboot and it should be good to go
Anyone else found a fix to this yet?
I'm now running ICS (turl build) issue is still there.
Steps taken to resolve
- discharge to zero
- charge to max
- wipe stats
still there.
The weird thing is that the actual capacity is fine, it can last all day no worries, just from midday onwards it thinks its 1% so has annoying LED flashing at you, also you have no idea how much batt it actually has.
Edit: I just realised your suggestion above has extra step (take batt out of connected atrix then insert again). I guess I'll have to drain it again and do it overnight... gah
wintermute000 said:
Anyone else found a fix to this yet?
I'm now running ICS (turl build) issue is still there.
Steps taken to resolve
- discharge to zero
- charge to max
- wipe stats
still there.
The weird thing is that the actual capacity is fine, it can last all day no worries, just from midday onwards it thinks its 1% so has annoying LED flashing at you, also you have no idea how much batt it actually has.
Edit: I just realised your suggestion above has extra step (take batt out of connected atrix then insert again). I guess I'll have to drain it again and do it overnight... gah
Click to expand...
Click to collapse
Nothing will work i have tried almost every tutorial. Recently i found out the phone is showing the the full capacity of battery only 500 that's why i think we will have to change that with the actual voltage to get a accurate battery indicator.What's ur battery full charge design check if from the root exploler
/sys/devices/platform/cpap_battery/power_supply/battery
My phone uevent is showing this
Powersupply-capacity=5
Powersupply-voltage-now=3836000
Powersupply-temp=260
Powersupply-charge-fill-design=500
Powersupply-charge-counter=1
terminator1983 said:
Nothing will work i have tried almost every tutorial. Recently i found out the phone is showing the the full capacity of battery only 500 that's why i think we will have to change that with the actual voltage to get a accurate battery indicator.What's ur battery full charge design check if from the root exploler
/sys/devices/platform/cpap_battery/power_supply/battery
My phone uevent is showing this
Powersupply-capacity=5
Powersupply-voltage-now=3836000
Powersupply-temp=260
Powersupply-charge-fill-design=500
Powersupply-charge-counter=1
Click to expand...
Click to collapse
I'll try the insert empty bat into already connected phone, charge to 100% remaining off, repeat trick overnight, then report back.
FWIW on my 'good' battery which is 1 year old ROFL it says 1880
not sure how changing it would help though or is even possible?. It must be dynamically reported somehow as my good battery gives me a 'good' stat.
I use battery calibration and it worked, have it
http://bit.ly/Ah732P
I'm guapurrin
the battery is charging calibration if you have to load it to calibrate
wintermute000 said:
FWIW on my 'good' battery which is 1 year old ROFL it says 1880
not sure how changing it would help though or is even possible?. It must be dynamically reported somehow as my good battery gives me a 'good' stat.
Click to expand...
Click to collapse
How much is ur other battery showing.I have tried different ways but was not able to change values.
500 same as you! second drain and calibrate did nothing
Maybe theres a faulty batch of batteries and we both got one
Can people PLEASE stop telling us to calibrate we've BOTH DONE THAT MANY TIMES NOW. The problem is that the capacity of the battery is being reported as 500mah not 1930 or whatever its supposed to be. THe actual running time of the battery is fantastic, just thinks its at 0 all the time lol
/sys/devices/platform/cpap_battery/power_supply/battery
Powersupply-charge-fill-design=500 - should be ~1900mah
Sent from my Sony Tablet S using Tapatalk

Battery, problem doing my head in :(

ok so i have the stock sony erricsson battery right, i have Naa kernel latest, i have tried every rom out there so far, and my battery is getting drained out within 3 hours, i thought it was the battery bought new battery guess what? same thing again so now ive tried ICS MINIcm9 Naa version, ive tried every version of MINIcm7, ive battery calibrated ALOT OF TIMES ! I am about to try different now, so guys please any advice? any else get this problem?
Try full wipe then flash the rom again
Send from my E15i using xda premium.
Press thanks if helped
*Xperia X8 Black @ ICS 4.0.4 miniCM9 on nAa ICS*
Thank you very much nAa!
inda95 said:
ok so i have the stock sony erricsson battery right, i have Naa kernel latest, i have tried every rom out there so far, and my battery is getting drained out within 3 hours, i thought it was the battery bought new battery guess what? same thing again so now ive tried ICS MINIcm9 Naa version, ive tried every version of MINIcm7, ive battery calibrated ALOT OF TIMES ! I am about to try different now, so guys please any advice? any else get this problem?
Click to expand...
Click to collapse
make a test disabling the data/wifi and bluetooth, don't use full brightness in the screen after that use it normally if in those conditions the battery still drains in 3 hours then I dare to say that is something in the hardware of the phone
DONE all of that ! tried everything trust me well i think ive tried everything, im on stock rom now, calibrating my battery again and again till i get 100% after restart, because whenever i charge it charges in like 20 minutes, lets see how i go, sometimes with 30% battery i get 4 hours, sometimes with 100% battery i get 4 hours battery, makes no sense whatsoever.
If u want u can tried to change a new battery
Send from my E15i using xda premium.
Press thanks if helped
*Xperia X8 Black @ ICS 4.0.4 miniCM9 on nAa ICS*
Thank you very much nAa!
inda95 said:
DONE all of that ! tried everything trust me well i think ive tried everything, im on stock rom now, calibrating my battery again and again till i get 100% after restart, because whenever i charge it charges in like 20 minutes, lets see how i go, sometimes with 30% battery i get 4 hours, sometimes with 100% battery i get 4 hours battery, makes no sense whatsoever.
Click to expand...
Click to collapse
you would never get 100% after restart because the phone uses battery when booting and loading the system.
calibrating if you are talking about the option that erase the file that have the stats of the battery that isn't going to change anything if your phone discharge in x minutes it will still discharge in that same amount of time because that method of calibration is a kind of reset to the %display in the phone nothing else.
if you can. try measuring the mA of the battery after charging it with a tester, then measure it again when the phone display something like 50% of charge it shouldn't vary a lot if the battery is in a good state.
but you in the first post said that you have tried with a new battery and still get the same time. and at the same time say that you have tried the phone with the data off. and get discharged quickly. if that is accurate then your phone have some kind of hardware failure that is making it use more battery than necessary, so you should send it to repair.
ps: also you can check the phone signal if you are in an area with poor reception the phone will use more battery because it will need to use more potency to establish a link with the cell tower.
anancr said:
you would never get 100% after restart because the phone uses battery when booting and loading the system.
calibrating if you are talking about the option that erase the file that have the stats of the battery that isn't going to change anything if your phone discharge in x minutes it will still discharge in that same amount of time because that method of calibration is a kind of reset to the %display in the phone nothing else.
if you can. try measuring the mA of the battery after charging it with a tester, then measure it again when the phone display something like 50% of charge it shouldn't vary a lot if the battery is in a good state.
but you in the first post said that you have tried with a new battery and still get the same time. and at the same time say that you have tried the phone with the data off. and get discharged quickly. if that is accurate then your phone have some kind of hardware failure that is making it use more battery than necessary, so you should send it to repair.
ps: also you can check the phone signal if you are in an area with poor reception the phone will use more battery because it will need to use more potency to establish a link with the cell tower.
Click to expand...
Click to collapse
nope not in an area with poor signal, ok im thinkin its an hardware failure as well, i might need to buy an external charger , my charging port might be screwed up, but like when i let my battery die down a little bit, and then i calibrate when it is at about 40% i then wipe battery stats and restart phone its at 22% and it stayed at 22% all night i didnt put it too charge and i listened to music for about 30 minutes or so, now i dont know what the f*** is going on i love my x10 mini pro, i just want this solved
I sort of got this kind of problem when i was running MiniCM2.2.0. It really buggered up the battery, it would lose about 7 or 8 percent when i was just looking at the lockscreen after powering up my phone.
Sometimes it will just drain like in no time at all, complain that i have to charge it, but when I turn off the phone and restart it, and it will say i'm at 60 percent. sometimes that is true, sometimes not, i only put it on the charger when I'm reasonably sure there is no power left, ie, if after a restart of two or three it will still say i'm under 10%.
So, whenever it runs out of power,do a restart and see how much power you've got left. don't charge it until you're absolutely sure you have to. Still not sure where it leads to, but I don't think i'll get back the battery-endurance i had before., which was about 3 or 4 days on fairly minimal use, without 3g or wifi.
(PS: Don't wipe battery stats until the phone is fully charged. Charging it from just about nothing to 100% in one go and then wiping the stats seems to give me best result.)
SmG67 said:
I sort of got this kind of problem when i was running MiniCM2.2.0. It really buggered up the battery, it would lose about 7 or 8 percent when i was just looking at the lockscreen after powering up my phone.
Sometimes it will just drain like in no time at all, complain that i have to charge it, but when I turn off the phone and restart it, and it will say i'm at 60 percent. sometimes that is true, sometimes not, i only put it on the charger when I'm reasonably sure there is no power left, ie, if after a restart of two or three it will still say i'm under 10%.
So, whenever it runs out of power,do a restart and see how much power you've got left. don't charge it until you're absolutely sure you have to. Still not sure where it leads to, but I don't think i'll get back the battery-endurance i had before., which was about 3 or 4 days on fairly minimal use, without 3g or wifi.
(PS: Don't wipe battery stats until the phone is fully charged. Charging it from just about nothing to 100% in one go and then wiping the stats seems to give me best result.)
Click to expand...
Click to collapse
hmmmm yes thats like my problem, ive wipe the battery at 100 most the time, and it works, but not well enough at all. ill try that buddy ! thanks and i might have a solution in mind, i think it is our phones charging capability not only the roms fault, cause im at stock now and still same problem, im going to try charge battery externally see where it gets me
did you tried with another charger ?
using USB on pc, 10cents USB charger... ?
matmutant said:
did you tried with another charger ?
using USB on pc, 10cents USB charger... ?
Click to expand...
Click to collapse
yep ive tried different charger and charging through USB. same thing charges to 100% really fast, and comes back down really fast, every single time i restart my phone after it has charged to one hundred percentage drops by 20% until it has come to its real charged percentage i think it is in the hardware of my phone, am i able to connect a bst38 battery to an old nokia to try charge the phone?

The problem with power. Please help me :(

Hi,
I have a very rare problem with my Xperia X10i. Namely quickly consumes battery. Calculated the average of the 5 minutes for 1% of the battery charge. Given the battery is discharged within 3-5 hours.
Xperia (unlocked bootloader, root and xRecovery). I have tried all ways, but none of them helped. I've done a full format of the new phone by installing the Android 2.3.3. Restored to factory settings, format the memory card, Avast antivirus scanning the phone.
I took it to the living room and said that it might have some short-circuit or short circuit in the phone. They said that in the middle of the phone is fine.
The problem appeared on the original batteries from Sony Ericsson BST-41. I thought maybe the fault lies in the battery so I bought a battery Andida 1700mHa but the effect is the same. The battery is exhausted within 3-5 hours. I thought the wine so it can rom. I installed rom from Wolfbreaka "uIBIDoom" which is 90MB, to no avail.
It seems to me that I've tried almost everything, but it is still some hope. Please help me.:crying:
hi. I dont think that 3 batteries can be broken. make sure you have disabled GPS, it drains battery quicky. wifi drains it faster too but not so much. try to recalibrate your battery.
Its hard to tell if it is normal ( 5 hours battery life) because we dont know how are you using your phone. Watching youtube with wifi online can drain battery realy quick. GPS too, also playing games.
Really I dont know whats the problem, but try to recalibrate your battery and turn off unnecesary services like GPS etc.
The case of the battery is such that initially work properly. She held as well, up to two days. Phone calmly withstood the night, which is not an option now. On the battery worked well, it happened overnight. Today went well, and the next day something happened to her. All necessary application off (gps, wifi, youtube)

Categories

Resources