Related
Hello All,
I have a XDA O2 , a mobile phone based Pocket PC 2002 Phone edition edition.
Now I reached a big problem . I have a really old RAS site. Normally I have
to enable 'Pop up terminal window after dailing...' in my laptop computer to
dail in it then I enter my user id and password . But now when I enabled
this option in my XDA, it always ask me the username and password first and
there is no popup DOS window popup after dailing. So how can I do due to
this special issue? And can I use some modem command script when I dail in
to get ride this problem?
Who has experence in this kind of problem or reached same situation? Pls
help me.
Thx
Li
[email protected]
here i am for another helping question , eheh sorry about that i'm quite newbie at PDA
i have a problem with activesync , it seems that now connect to the PDA only as GUEST and i can't update any info
how to reset that type of connection ?
If it is connected as guest, just reinsert your device into the cradle. The active sync window will appear and ask you for the type of connection....
HTH
Stefan
unfortunately not , it seems that everytime i connect it to the cradle , activesync connect it only as guest. It's weird because i didn't choose first time the guest account ...
Why do you think, your device ic connected as guest?
Have you checked yiur sync settings of active sync?
Stefan
thanks for the reply lumpistefan
i found a workaround , with the activesync open , without the XDA insterted in the cradle , i removed every partnership and recreated
Problems deleting partnership name
Think I found the answer at
http://www.bevhoward.com/ASync.htm#Reuse
I did a file search using the device name and deleted all of those and bingo I could use the name again !!
Any1 tell me Please!
Today i upgrade my I-mate PocketPC from WM2003SE (2.06) to WM 5.0 by Buzz. The process did very well and i got the Device HardReset. But when i connected my I-mate pocket to my laptop by Actrivesync 4.0 build 4343 i got the following problems:
1) My laptop created a new connection in Control Panel -> Network Connection -> Connection to local 2. Is that right or wrong ?
2) When i try to connect to my PPC it is nothing. Activesync not connected.
3) When i romove my PPC from the cradle and i open the activesync in PPC it said that activesync connected? Any1 tell me that is the held it?
Any1 tell newbie how to connect from my PPC to my laptop by Activesync right.
thanks
What Windows version are you running on the PC? XP with Service Pack 1?
Many users -including me- are unable to sync via USB with WM2005 because WM2005 needs a different USB driver that is part of service pack 2.
I use bluetooth to activesync.
Cheers
Pat
pschoch said:
What Windows version are you running on the PC? XP with Service Pack 1?
Click to expand...
Click to collapse
I am using Windows XP service pack 2.
Any1 helps me please
Did anyone solve the problem of using asynch4 with wm2005 via usb?
I upgradee to os f version but now I have synch error.... :evil:
disable your firewall(s) and anti-virus software before you connect the PDA. On my machine Norton AntiVirus blocks AS4. Disabling it for 15 minutes before I connect corrects the issue.
gmerin said:
disable your firewall(s) and anti-virus software before you connect the PDA. On my machine Norton AntiVirus blocks AS4. Disabling it for 15 minutes before I connect corrects the issue.
Click to expand...
Click to collapse
well it does connect, and synch time and date, but it does not synch contacts etc, it just gives synch error. I think i'll go back to 2003 if i can't solve it. snif
gmerin said:
disable your firewall(s) and anti-virus software before you connect the PDA. On my machine Norton AntiVirus blocks AS4. Disabling it for 15 minutes before I connect corrects the issue.
Click to expand...
Click to collapse
Hey!! I got the solution: use as 4 build 4328 not 4343. now it works!! I am a happy man again!!
Could you show me where link I can download Active Sync 4 ver 4328, I only download ver 4343??? I still have trouble with AS4.0 ver 4343 connect with PC, oh my god, I nearly going to die!
invensys said:
Could you show me where link I can download Active Sync 4 ver 4328, I only download ver 4343??? I still have trouble with AS4.0 ver 4343 connect with PC, oh my god, I nearly going to die!
Click to expand...
Click to collapse
I know how u feel!!!! :evil: :evil: :evil:
Its on the ftp site of the forum under Himalaya2005/ActiveSynch4.0
it worked for me good luck
activesync 4.0 issues...change usb ports
Try swapping your usb cable to another usb port on your computer.
If sync doesn't occur on my first port I switch to my second port and voila, it syncs! Not sure why this is the case but it's a temp solution...
AS4 build 4328 still not sync my XDAII
Can anybody help me...?
Re: AS4 build 4328 still not sync my XDAII
mwilmar said:
Can anybody help me...?
Click to expand...
Click to collapse
1. U have must SP.2 WinXP
2. uninstall AS.xx - del AS dir on Prgram file - reboot - Install AS 4.0 - Try again
3. patch with this file
Thanks
Phreakazoidz
Re: AS4 build 4328 still not sync my XDAII
Phreakazoidz said:
mwilmar said:
Can anybody help me...?
Click to expand...
Click to collapse
1. U have must SP.2 WinXP
2. uninstall AS.xx - del AS dir on Prgram file - reboot - Install AS 4.0 - Try again
3. patch with this file
Thanks
Phreakazoidz
Click to expand...
Click to collapse
it's not work
(C:\WINDOWS\system32\ ceutil.dll & rapi.dll)
this patch make my async error looking original file...
any solution for this...?
Re: AS4 build 4328 still not sync my XDAII
mwilmar said:
Phreakazoidz said:
mwilmar said:
Can anybody help me...?
Click to expand...
Click to collapse
1. U have must SP.2 WinXP
2. uninstall AS.xx - del AS dir on Prgram file - reboot - Install AS 4.0 - Try again
3. patch with this file
Thanks
Phreakazoidz
Click to expand...
Click to collapse
it's not work
(C:\WINDOWS\system32\ ceutil.dll & rapi.dll)
this patch make my async error looking original file...
any solution for this...?
Click to expand...
Click to collapse
try to upgrade ur Radio: 1.18.00 and get files at ftp himalaya/wm2005 not other directory
Thanks
Thanks
Re: AS4 build 4328 still not sync my XDAII
mwilmar said:
Phreakazoidz said:
mwilmar said:
Can anybody help me...?
Click to expand...
Click to collapse
1. U have must SP.2 WinXP
2. uninstall AS.xx - del AS dir on Prgram file - reboot - Install AS 4.0 - Try again
3. patch with this file
Thanks
Phreakazoidz
Click to expand...
Click to collapse
it's not work
(C:\WINDOWS\system32\ ceutil.dll & rapi.dll)
this patch make my async error looking original file...
any solution for this...?
Click to expand...
Click to collapse
try to upgrade ur Radio: 1.18.00 and get files at ftp himalaya/wm2005 not other directory
i have try and work!! but after install extrom 2755 my usb not work again
sorry bad english! :twisted:
any solution?
Phreakazoidz
Thanks
Thanks
Boonar said:
Did anyone solve the problem of using asynch4 with wm2005 via usb?
I upgradee to os f version but now I have synch error.... :evil:
Click to expand...
Click to collapse
HEUREKAAAA!!!
Hi all,
I had the same problems 2 days I spend all my free minutes to that Problem only onece the AS4 syncs starts and I dont know why no more Sync with WM2005 and AS4 (or AS3.8) but tying out the new WM2k5_1.50h_XDA2_HIMALAYA.rar I mean the version is H not G!!!
All my troble where gone.
Try this out i say!
I had the same problem.
I opened the Device manager in settings and under Network adapters I found the "windows mobile-based Device".
I updated the driver and it worked.
I hope I was helpful.
Regards
how about WM2k5_1.60a_XDA2_HIMALAYA i ll try and my AS4 still not connect
poor me!!!
i have try to upgrade
OfficialO2asiaRomUpgrade16044e ~> WM2k5_1.60a_XDA2_HIMALAYA
XdA2JoJo.v3.2zS ~> WM2k5_1.60a_XDA2_HIMALAYA
OfficialO2asiaRomUpgrade16044e ~> WM2k5_1.50h_XDA2_HIMALAYA
XdA2JoJo.v3.2zS ~> WM2k5_1.50h_XDA2_HIMALAYA
my AS4 still Running ............ running but not connect!!!!
i don't know what happen to your setup guys...
but all AS4 version works for me...
sometimes i got an error also connecting to usb...
please try this:
* please do not connect yet the device...
* open the PC task manager...
* end process: ''wcescomm.exe'', ''WCESMgr.exe" and "rapinmgr.exe"...
* connect the device directly to the usb port...
* open the ''wcescomm.exe'', ''WCESMgr.exe" and "rapinmgr.exe" from PC ''program files/Microsoft ActiveSync"
* if not connected, right click the ''WCESMgr" at the PC system bar to open the ''connection settings'', check allow usb...
hope its work for you all...
Ill Try!!
Thanks JOJO
MABUHAY JOJO!!!
:twisted:
xda2jojo said:
i don't know what happen to your setup guys...
but all AS4 version works for me...
sometimes i got an error also connecting to usb...
please try this:
* please do not connect yet the device...
* open the PC task manager...
* end process: ''wcescomm.exe'', ''WCESMgr.exe" and "rapinmgr.exe"...
* connect the device directly to the usb port...
* open the ''wcescomm.exe'', ''WCESMgr.exe" and "rapinmgr.exe" from PC ''program files/Microsoft ActiveSync"
* if not connected, right click the ''WCESMgr" at the PC system bar to open the ''connection settings'', check allow usb...
hope its work for you all...
Click to expand...
Click to collapse
superb!
thanks a lot jojo.
worked for me now after upgrading to 1.60a
thanks to buzz and toe too....
where's the 96-32 version?
xda2jojo said:
i don't know what happen to your setup guys...
but all AS4 version works for me...
sometimes i got an error also connecting to usb...
please try this:
* please do not connect yet the device...
* open the PC task manager...
* end process: ''wcescomm.exe'', ''WCESMgr.exe" and "rapinmgr.exe"...
* connect the device directly to the usb port...
* open the ''wcescomm.exe'', ''WCESMgr.exe" and "rapinmgr.exe" from PC ''program files/Microsoft ActiveSync"
* if not connected, right click the ''WCESMgr" at the PC system bar to open the ''connection settings'', check allow usb...
hope its work for you all...
Click to expand...
Click to collapse
I did this, but I'm still stuck. The AS icon keeps on spinning, and then I get an error "Unable to obtain a server-assigned IP address. Try again later or enter an IP address in Network settings." Please help...
I somehow made it sync! But the problem now is that Activesync stays minimized and I cannot get it maximized! Please...
Hi Guys, I just took my old XDA2 out of retirement (it died as I broke the sim card reader) And decided I want to use it as an about the house Internet Browser and possibly media player.
I know what software to put on it to make it do what I want but I'm stuck with getting it to to connect to the net
I have tried several ROM's (I hate the official o2 rom just because of all the crap) I like the WM6 ROM as it is the latest software But when I put it back into my cradle it comes up unrecognised and wont sync with active sync.
I cant get it to sync over bluetooth either? I can pair it with my PC via bluetooth but cant synch it. As I have windows Vista I am trying to sync with windows mobile device centre and still no joy. personally i dont care f it does sync but I'm sure I need it to so that i can browse the internet on my xda????
Now I'm stuck... do I flash it with an older ROM in the hope it will start to sync with one of my 2 PC's (It really needs to work with the vista PC)
Or is there another way I can set this up regardless of the rom so I can have some kind of local bluetooth network where I can access the net and my PC via the XDA2?
I would prefer the latter as I can Use the newer WM6 ROM.
my xda2 sync just fine over bluetooth
i set the xda2 in descoverymode and add it from vista bluetooth setup
and the xda2 see the vista pc and let me add it and then
in activesync on the xda2 i pick sync over bluetooth
otherwise you can take a look at this
http://wiki.xda-developers.com/index.php?pagename=InternetOverBluetoothNetwork
I have a lot of problems with sync over bluetooth, but my reason is really simple, I turn off microsoft firewall on my PC with WinXP and It is work fine..I can be on net and icq...
Internet over activesync???
Hi, is there a way to connect my xda to internet over activesync?
unless you have disabled it on the pc or on the pocketpc
your pda is always connected to the same network internet and otherwise when
connected to activesync
can u teach me how? after disabling connection from the pc, wat will i do nxt?
"can u teach me how? after disabling connection from the pc, wat will i do nxt?"
hhmmm at no point did i tell you to disable connection from the pc.....
settings->connections->connections->advanced->select networks
there are some texts showing "programs that automatically connect to the internet should connect using"
and a dropdownbox
select the dropdownbox item which is not called something like "my isp"
but pick the one thats called something like "my network"
then all programs trying to access the internet will be forced to use activesync as internet connection and if activesync is not connected they will fail!
Ei man, kinda misunderstood it. sorry. I'll try it later. BTW, u know how to upgrade wm2003se to wm5 or wm6? can u teach me step by step how to's? or possibly know a clear steps by steps procedure threads?
this is a copyPaste directly from the file in all the roms called READMEFIRST.txt
"Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
Run HimaUpgradeUt.exe (or HimaUpgradeUt_NoID.exe if flashing on any Himalaya other which is from than O2)
Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
Detach your device from the cradle.
Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES"
Ei man, thnx, ur advice work with activesync.
Now having prob. with upgrading stuff. cant find any ROM, can u suggest one? is wm2005 1.50 ok??? bTW, i have 02 xda II with wm2003se.
Ei myt, got a question.. u know where can i find the .exe file for on/off button???