Hi
I have a qtek2020.It dosen't work with activesync now.I have its rom image .How could i do Qtek2020 rom burn without activesync?
Related
hi everyone,
i have a huge problem. my rom flash for my i-mate (qtek 2020, mdaII, XDAII) hung during flashing (from 1.66 to 1.72 official i-mate rom) during the ce upgrade step 2. now my i-mate just hangs at the blue i-mate screen and i cant connect to it through pc anymore, get error 101. is there any way to get a good rom on it again (can i connect to the ppc by another way, other software or sd-card0 so it will work again, or does it have to be epaired at at a rapaircenter?
thnx, sorry for the bad english
See the pm i send you.
I have the same problem ...
plz tell me how u solve it
Best regards
plz help, i-mate dead after failed flash, error 101
Hi,
If all that happened was it hung during upgrade you can put the device into bootloader, power+d-pad+softreset button, and attempt upgrade again, but if OS you were upgrading to is corrupt causing the hang a new rom might be the way to go, www.buzzdev.net has everything i needed, or clubimate.com
I have same problem. My q-tec100 is reseting so I can' connect it to pc for flashing again. Please tel me what is bootloader and what is d-pad button so thad i can stop it from reset and connecting for flash
hi friends i have the same prob. somebody plz help me too
Hi
My qtek2020 does show USB V1.06 or Serial V1.06 on the screen.I cannot connect to PC via activesync.It is in bootloader mode.Doesn't work.How to load rom in bootloader?
you must terminate the active sync processes (normally only wcescomm.exe) for more details ...
http://buzzdev.net/component/option,com_simpleboard/Itemid,59/func,view/id,22154/catid,8/
qtek2020
Hi
I need eng rom image for qtek2020.I did not copy my rom image.Where can i find it?
Please be more specific ... Because above you ask for a connection issue .. now for a rom .. what exactly is your need?
WM2003SE or WM2005 .. www.buzzdev.net
For WM2003 .. I don't know
Just uploaded a new rom to my xda, but since I have done this I can no longer connect to activesync.
Any ideas ?
Which ROM are you using, and which version of ActiveSync?
Stefan
I tried to upgrade my imate jamin s200 to smart1_wm6_pp8mb. since the operation did not finished I unplugged the usb cable, therefore the machine didn't work and opening now. now some messages are appearing on the screen (IPL:2.15.0001; SPL 2.15.0001; GSM 02.19.21; OS:10.1.0.811)
i need your urgently help... How can i fix it this problem and upgrade my rom again?
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Thank you very much, could you plase upload here i cant find the last update ,
i''m waiting you..
i dont know what is my qtek last update How can i learn it?
When you want to know what ROM you have flashed to your device, go to Start -> Settings -> System -> Device Information! Here you can find all information you need!
By the way: the latest Qtek update for the S200 is 2.20! You can find it trough Gooogle or the board search! Good luck!
animelover said:
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Click to expand...
Click to collapse
Hi animelover,
Just a question...Do you use the OS extract tool to flash only the os without changing the IPL/SPL, or the roms that you wrote about have no IPL/SPL upgrade? I mean did you fash directly or you flashed only the extracted OS?
Thanks!
Hello Guys,
I have updatet my PPC from Windows 2003 to Windows mobile 6.
Now i have downgradet to windows mobile 5 and my telephone (calls) dont work.
I i try to upgrade to another version (wm6) i get an error "Country-ID Error" on my PC and my Pocket PC goes off. If i take my PPC out of the Cradle, my pps returns in the Bootloader modus and "Seriell" have a red Background..
Please help me
which ROM have you used ?
before,, mine is xda-II, and very happy with wm6 from :
C_ShekharAKU7.0c.R40.P24_public
try to reflash with another wm6 ROM, i did 4 times reflasher with wm6 ROM different. and stable with C_ShekharAKU7.0c.R40.P24_public
maybe you must use or click at HimaUpgradeUt_noID.exe
not at HimaUpgradeUt.exe