Just uploaded a new rom to my xda, but since I have done this I can no longer connect to activesync.
Any ideas ?
Which ROM are you using, and which version of ActiveSync?
Stefan
Related
Please guide me to upgrade my Siemens SX-56 from Pocket PC 2002 Versions ROM Version 3.17.03
Is it ok to upgrade it to Windows Mobile 2003 Second Edition ROM Version 3.04.00
I have downloaded Windows Mobile 2003 Second Edition ROM Version 3.04.00 from the following site:
http://wiki.xda-developers.com/index.php?pagename=ROMVersions&version=5
Its an EXE file. Do I copy it in my SD card and run it from there or Directly from Computer.
If Windows Mobile 2003 Second Edition ROM Version 3.04.00 is not a good option please suggest which version will be the best.
Thanks
Aamer Sheikh
I would suggest you use the 4.01.12 ROM since the WM2003 SE has some "little problems". I think this is the most functional (English) ROM for teh XDA.
Just download the exe file. connect your device to your PC via ActiveSync and run the exe file on your PC. Then just follow the instructions...
HTH
Stefan
Well, i do suggest wm2003se...for me it is faster than wm2003, it has screen rotation, and it does not wipes out your SD-card.
Thank You LumpiStefan & KTamas
I have upgraded my Rom to wm2003se (3.04.00_ENG) so far it seems to be working fine
and yes KTamas you are right it seems to be more faster than the previous version.
I have a quick question.
Am trying to load all my previous softwares but am getting the message that the software may not display properly. Do i need to download all the softwares again for WM2003.
Another Q i dont seem to find MMS Composer on this WM2003SE. Do I need to install that seperately?
Thanks to Both of you for Helping me out
Regards
Aamer Sheikh
aamer said:
I have a quick question.
Am trying to load all my previous softwares but am getting the message that the software may not display properly. Do i need to download all the softwares again for WM2003.
Click to expand...
Click to collapse
You don't have to worry about this message. It says that the software MAYBE not works well in landscape mode.
aamer said:
Another Q i dont seem to find MMS Composer on this WM2003SE. Do I need to install that seperately?
Click to expand...
Click to collapse
Yes, you have to install it seperatelly.
After Update to WM2003SE the only problem I have is that Infra Transfer is not working.
Neither I can send or Receive any file via Infra Beam.
Tried once to Downgrade it to the orignaly installed version but still no use. it still dont work.
is there any driver or software which can resolve this issue.
please do note it does detect any phone i try to send file via infra beam. but it says FAILED.
Await your Reply
Aamer
Infrared worked for me fine. Tried it just in the moment between to XDA´s. Ohne have WM2003SE and the other one PPC2002.
Transfer worked in bothe directions without any problem....
Stefan
Mine is not working at all
is there any software u can suggest that i should install
which cud solve the problemo
you did renember to turn on recieve all beam files in connection right ?
LumpiStefan said:
Infrared worked for me fine. Tried it just in the moment between to XDA´s. Ohne have WM2003SE and the other one PPC2002.
Transfer worked in bothe directions without any problem....
Stefan
Click to expand...
Click to collapse
I had no probs either.
yes i did turn it on.
is it possible that the bootloader is messed-up?
aamer
aamer said:
yes i did turn it on.
is it possible that the bootloader is messed-up?
Click to expand...
Click to collapse
Nomrally infrared has nothing to do with the bootlaoder, so i don't believe it. And you said, that the infrared is working and just the transfer failed....
But i've got no solution how to fix that problem...
Stefan
Hi all.
I tried to update to WM6 on my Dopod 818 Pro with ProphetTouchIXbeta2. It displayed and error and after hard resetting I can only get the splash screen. So I roamed the forum the whole day downloaded a couple of other WM6 packages (I could not get the WM5 files from the WM6 upgrade guide, link is dead). So I downloaded the ROM updates from the HTC websites for the 818 Pro. I can start the 818 Pro into Bootloader, but whatever ROM file I use will tell me Update Error 260 Cannot connect!!
The Bootloader tells me the following: IPL 2.15.0001 / SPL 2.15.0001 and USB connected. Active Sync will not connect.
Sorry, I am a newbie and should have waited for the official upgrade. But I had to try
Thank you in advance for any help!
Cheers,
Markus
Hi,
i had the same trouble some time ago. The false was, that I connect my NEO on an USB Hub, take a direct connection between your PC and your XDA. Also, if it's possible, try another PC. HTH
Put your Prophet in bootloadermode: press Camm button and soft reset at the same time.
In ActiveSync on your PC: DISable connectionsetting "Allow USB connection"
Conect your Prophet to a USBport directly with a cable.
Run a NVID-RUU, perhaps the official VID-RUU doesn't recognize your device anymore.
This should do it.
i can confirm this process
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
starkus said:
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
Click to expand...
Click to collapse
Activesync is not supose to conect to phone in bootloder
just run the wm5
Thanks,
but if I run the WM5 by HTC its only goes to the Verify information screen and after that. it says Error [260]: Connection. The Update utility cannot connect to your PDA Phone.
And in the beginning of the process it displays a couple of steps, like check that your battery is at least 50% charged and other ssteps, of which one is, that I have to make sure that ActiveSyc is connected.
Cheers,
Markus
Solved
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
starkus said:
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
Click to expand...
Click to collapse
which one was "full of viruses" and how you checked it ?
Sorry should have mentioned it before:
It was Prophet"s_2.20.7.34_2.20.7114_02.69.21
Virus or unwanted program 'W32/Sality.L [W32/Sality.L]'
All .exes were infected in that package.
Cheers,
Markus
hello all,
i am using jiggs rom AKA 3.3 on XDA ATOM
but i am not able to use ICS as it always give me an error..."cannot connect for an error reason. To change your connection settings, tap settings" and this error is same for both USB and BT LAN. my EDGE connection is working as i can connect to the net on my PDA.
please tell me what to do?? or please provide me with a patch.
also can i get the same softwares included in this rom on a WM6 rom??
please help me..need it ASAP as i am not able to connect my laptop to net.
puneet_84 said:
hello all,
i am using jiggs rom AKA 3.3 on XDA ATOM
but i am not able to use ICS as it always give me an error..."cannot connect for an error reason. To change your connection settings, tap settings" and this error is same for both USB and BT LAN. my EDGE connection is working as i can connect to the net on my PDA.
please tell me what to do?? or please provide me with a patch.
also can i get the same softwares included in this rom on a WM6 rom??
please help me..need it ASAP as i am not able to connect my laptop to net.
Click to expand...
Click to collapse
do you still want WM5 instead of WM6? ICS is fully working on WM6...
you could try to install it manually. DOWNLOAD ICS HERE
Install it on device and NOT on storage card. Thanks to Chainfire for the install cab. I'm not sure if it would be okay to overwrite the non-functioning ICS on your ROM.
thanks tj for the info.
i do not want to use WM5 but want the package provided in the WM5 rom of jiggs.
also i tried installing it but it gave me error saying there is some certificate conflict. so i will soon migrate to WM6.
thanks again
I have tried and downloaded WM6.0 from the official dopod website and I found it to be slower and more complicated to use than the original WM5.0 which came with the system.
Would any of the ROM WM6.0 here be any faster and stable? My prioirty concern is Speed and Stability. Any advice which ROM I should try?
Thank you for any advice.
jlingo said:
I have tried and downloaded WM6.0 from the official dopod website and I found it to be slower and more complicated to use than the original WM5.0 which came with the system.
Would any of the ROM WM6.0 here be any faster and stable? My prioirty concern is Speed and Stability. Any advice which ROM I should try?
Thank you for any advice.
Click to expand...
Click to collapse
Get inline for PK 4.0. You can join the other addicts including myself that are eagerly awaiting the release of this ROM. Untill then I think you will find PK 3.0 to be the best thing since sliced bread for your wonderful PDA.
Uhm where I could download this PK 3.0?
http://athenaproject.logontek.com/AP...Dual 3.0.rar
Is it this one?
I'm having a trouble updating. It kept on going into The Image File is Corrupted ERROR after 1%.
ERROR 270 Update Error
I'm using Windows Vista, WMDC 6.1
jlingo said:
Uhm where I could download this PK 3.0?
http://athenaproject.logontek.com/AP...Dual 3.0.rar
Is it this one?
I'm having a trouble updating. It kept on going into The Image File is Corrupted ERROR after 1%.
ERROR 270 Update Error
I'm using Windows Vista, WMDC 6.1
Click to expand...
Click to collapse
Hi
You should be load the original rom first then unlock your device with Olipro's unlocker then load PK 3 rom. Without unlocking the CID you can't load just any other roms. Find the rom it came with it or the updated rom from HTC.
Olipros unlocker is available here http://forum.xda-developers.com/showthread.php?t=315831
Also read the unlocker thread before you update.
Thanks Great stuff.
I thought the unlocking was only for those who have Athena with Locked SIM card
Anyhow, I have flashed with PK 3.0 successfully.
Ok I am experiencing difficulty pairing syncing by Bluetooth. I already went to the registry to delete
hlkm/software/microsoft/bluetooth/activesync and still the problem not resolved.
Any solution?
Port not Available: Cannot communicate with PC because Port not available. Another program may be using the port.
jlingo said:
Ok I am experiencing difficulty pairing syncing by Bluetooth. I already went to the registry to delete
hlkm/software/microsoft/bluetooth/activesync and still the problem not resolved.
Any solution?
Port not Available: Cannot communicate with PC because Port not available. Another program may be using the port.
Click to expand...
Click to collapse
Hi again
See here how to activesync via bluetooth .(But remember not to use bluetooth for flashing the roms)
http://www.htcwiki.com/page/activesync+via+bluetooth?t=anon
Also remember to disconnect after your needs, otherwise your battery will be drined quickly.
Good luck
hi I have tried but the problem still persists. I still kept on getting the same error.
Now it works, I just hard-reset. the most painful way.
------------
he,
i'm just starting to update my rom versions of my qtek 2020(xda II)
furst i updated from a 1.72 wwe to the 1.75 from qtek self (http://www.qtek.nl/2020_updates.asp) than i updated to the wm6.1.2aR16.P32_public rom from
C_Shekhar and after that update it tryed to sync a couple times and gave the error you need ActiveSync 4.5(I all ready had it installed)
now it isn't trying to sync at all, i also can't juse my flashcard
please I need help.
thanks
I had the same problem. I tried everything - without succdess.
The only thing that helped: (surprise!)
reinstallation of active sync! (setup/repair)
now it's working fine.