Can anyone please tell me why I can't get this link to work? I get a "could not establish connection with server" error.
http://cuba.calyx.nl/~jsummers/XDA/XDAtools-Jeff.exe
I have a PW10B1 I got from TMobile a few years ago that I thought was useless as a phone since I changed to Cingular until I ran into your website, but I can't get to any of the XDAtools. Thanks
Use this link:
ftp://xda:[email protected]/Wallaby/Tools/XDATools.zip
Stefan
Related
I bought an O2 XDA-II only about a week ago, with the following ROM/Radio Versions:
1.60.00 - ROM Version
1.10.00 - Radio Version
Today, I tried upgrading the XDA with the latest ROM upgrade from o2 UK, 1.60.50, using a USB cradle. Unfortunately, the cradle wasnt connected to the power supply as required by the program, and at about 8%, I got a message saying that there has been an error and that I should start the process again. I did so, this time making sure the power supply was connected, but the same thing kept on happening again and again. I even tried to flash the XDA with the German ROM but the same error occured at the same place. Restarting my PC / reinstalling ActiveSync wasnt of any help either.
I now have a dead XDA-2 which just says "Serial" and "V 1.03" when I put it on the cradle. Any help on what I can do now will be greatly appreciated. Thanks
you could try and read this
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
Rudegar said:
you could try and read this
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
Click to expand...
Click to collapse
Thanks for the reply, but I dont think it would help me, as the site you quoted mentions that I need to copy some files onto my XDA and check the version, something that is not possible with my XDA being dead. I contacted O2 and they said that this looks like a warranty issue, but as I will not be back in the UK for the next couple of months, this puts me in a very tight spot. Has anyone else experienced similar problems with their XDA-II?
yes i did the same..... had to get mine replaced by O2
error: getconnectiontype - an existing connection was forcibly closed by the remote host. error getting connection type. this happens when i try to burn a new rom into the xda. i have been reading for the past 2 days to no avail. i even went and bought an sd r/w usb. the other issue is that no matter what i try, i can not get it to unlock the sim. my wife liked my ppc so i bought her one and i am trying to get it together for her for x-mas. i have the same prob with my xda as well/
here's the info one xda: two xda
att sx56 pw10b1 t-mobile sx56 pw10b1
rom 4.01.16 rom 4.01.16eng
radio 6.24.00 radio 6.02
protocol 324e4 protocol 324e4
thank you in advance
Same here
I too experience the same issue when attempting to flash the ROM on on my PW10b1. If anyone can provide insight, I would be very grateful.
Interestingly, I have the exact same configuration as the original post.
so did flashing using a sd card help ?
there are no tools to unlock sims cards the tools unlock the phone so it's not locked to a sim card
some sim cards are incompatible
about unlocking read here
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz
http://forum.xda-developers.com/showthread.php?t=240784
I tried to do a ROM Upgrade but something went wrong and now the screen on my XDA II just shows the words Serial and v1.06. When I did a hard reset the screen still shows the same thing. When I connect the device using the cradle the word Serial changed to USB, but it didn't seem to connect to the PC. The Activesync was not activated also. When I tried to run the ROM Upgrade again, it shows ERROR 100: MODEL ID ERROR. I tried to run HimaUpgradeUT_noID.exe, it shows Error 103: ROM IMAGE FILE NOT FOUND. Can anyone please help me get my device working again? Thank you in advance.
Wrong ID
a few days ago i had the same problem with my HTC Blue Angel (also known as
qtek 9090)
temporaly youre PDA shows the bootloaderscreen. On top it shows youre kind of connection, on the bottom you can find the revision of this piece of software.
try this tool to reanimate youre pda.
http://rapidshare.com/files/36498840/MaUpgradeUt_noID.rar runterladen.
extract this file into the dir, where you have copied the original ROM-Image from youre developer, put youre PDA into cradle and check, if the status of this connection is changed in USB. Everything o.k? Right now: doubleklick on MAUpgradeUT_NoID and drink a coffee. it takes about 10 Minutes and after this youre pda runs as well. dont forget to copy youre original ROM-Image with the original Installer after finishing this procedure to avoid any errors.
Well, i hope this tutor will help you. i´m interested for.
Wrong ID
a few days ago i had the same problem with my HTC Blue Angel (also known as
qtek 9090)
temporaly youre PDA shows the bootloaderscreen. On top it shows youre kind of connection, on the bottom you can find the revision of this piece of software.
try this tool to reanimate youre pda.
http://rapidshare.com/files/36498840/MaUpgradeUt_noID.rar runterladen.
extract this file into the dir, where you have copied the original ROM-Image from youre developer, put youre PDA into cradle and check, if the status of this connection is changed in USB. Everything o.k? Right now: doubleklick on MAUpgradeUT_NoID and drink a coffee. it takes about 10 Minutes and after this youre pda runs as well. dont forget to copy youre original ROM-Image with the original Installer after finishing this procedure to avoid any errors.
Well, i hope this tutor will help you. i´m interested for.
[email protected] youre own risk.
Dead XDA II
Hi Guys, I'm new to all this because my XDA has never failed me, until now. I too tried to upgrade the ROM, realising too late that the upgrade from a UK site was not meast for the Asian zone.
Anyway, I tried downloading the following link:
http://rapidshare.com/files/36498840...adeUt_noID.rar runterladen.
When I tried to lanch the file it tells me that RUU.dll is missing.
Is there a link that works or is there a fix for this? As I said, I'm new to this therefore need step by step instruction.
Hope someone can assist, I'm lost without my XDA II.
Thank you
Ben
cannot download from the link
hello
I have a black screen on my qtek 2020i (XDA2i) after upgrading the ROM, and I saw that the solution you are providing works good, but I cannot download the fix using the link
please advice
http://rapidshare.com/files/36498840/MaUpgradeUt_noID.rar
XDAII Dead
hi,
ive put my MDA into the cradle and get the Serial screen to change to a USB screen. ive downloaded the file and put it with the rom upgrade that i got frm T-Mobile. when i run the program on my computer i keep gettin "Connection Error" screen. what should i do.
pleas advise.
m1000 dead sad
i regreat to say i did try for update my spv m1000 today but my got died now when i tried i did conntect my ppc with ppc via bluetooth actvesync when i run HimaUpgradeUt.exe then a window open and shows mgs wait 30 minunt but after even 1 minunt got error also my phone got stop like dead and screen shows on top serial and on bottom it shows v1.3 i realy .sad. becouse now i cant reeboot also even ui have not data cable any body help me plz what i do now ?
thanks for my help
really want to say thanks who helpd me i upgraded now my spv m1000 my self without any problem becouse i brought data cable of i mate and its workin fine with my spv m1000 yahooooooooo xda roken
usman_hussain1987 said:
hi,
ive put my MDA into the cradle and get the Serial screen to change to a USB screen. ive downloaded the file and put it with the rom upgrade that i got frm T-Mobile. when i run the program on my computer i keep gettin "Connection Error" screen. what should i do.
pleas advise.
Click to expand...
Click to collapse
Hi Usman,
What OS of windows PC do you use? it can't work with windows vista. Try to downloads new version of active sync then try it again. The upgrade is specify, can't work in any kind of devices
I am using vista and I was trying to flash my phone to the one provide by 3g in Australia. I updated the usb driver. During the update process someone unplugged the cable!!!!!
Now my phone doesn't pass the windows mobile logo and be able to get in the boot loader mode. Is my phone dead? I tried that rom again it says error 294 invalid vender id. I also tried to upgrade it to wm6 but always get 262 update error which says communication error.
Any help???
Thanks in advance
hi Richard,
for other reasons it looks like you have the same problems I had:
http://forum.xda-developers.com/showthread.php?t=319625
In this thread I have summarized my problems - and there was a procedure to fix it (at least for me) - it will take some hours to get everything DL and installed & compiled
When you need it I could describe more detailed what I did after I got my phone back to live via KITL
hope it will also work for you
Matthias
im getting a code 260 and the phone resets it self and active sync looses it connection any ideas
i think u're in the wrong forum..
jstuart83 said:
im getting a code 260 and the phone resets it self and active sync looses it connection any ideas
Click to expand...
Click to collapse
That my friend is a communication error... I had it frequently when trying to install the latest HardSPL under Vista... You can go HERE and see a list of error codes....
ERROR [248~260] : UPDATE ERROR
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
jstuart83 said:
im getting a code 260 and the phone resets it self and active sync looses it connection any ideas
Click to expand...
Click to collapse
AT&T Tilt is a Kaiser....NOT a Hermes.
go to the kaiser forum and they will help you out.
Hermes Getting code 260
I am having the exact same issue. My problem is on a hermes (ATT 8525)
i have the "update error" problem as well. i have read almost all the threads and searched so much i almost found jimmy hoffa, but nothing
i have tried everything i could think of. i reseted the device and computer so many times i think it will "ware out" soon . i tried official roms, hard spl, unlockers... you name it i've tried it and still i cant get past any RUU. after the bootloader it should start, but i doesn't
i've even called the t-mobile tech support but the answer was "our ruu works fine for us, we don't know where the problem is...bad luck"
if some one has any (well don't take this literally) advice he is more than welcome. now i'm gonna chill out
thanx in advance from a frustrated vario II user
i've located the problem. it's an activesync error (code 43). searched for fixes, but unsuccessfully. if anyone has resolved the problem or has relevant info, please post it. thanx
after endles repeats i've somehow managed to get past the error. don't know how. i upgraded the rom smoothly, like i never had any problems